Subversion Repositories openrisc_me

/*      $NetBSD: clnt.h,v 1.14 2000/06/02 22:57:55 fvdl Exp $   */

/*

 * Sun RPC is a product of Sun Microsystems, Inc. and is provided for

 * unrestricted use provided that this legend is included on all tape

 * media and as a part of the software program in whole or part.  Users

 * may copy or modify Sun RPC without charge, but are not authorized

 * to license or distribute it to anyone else except as part of a product or

 * program developed by the user.

 *

 * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE

 * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR

 * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.

 *

 * Sun RPC is provided with no support and without any obligation on the

 * part of Sun Microsystems, Inc. to assist in its use, correction,

 * modification or enhancement.

 *

 * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE

 * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC

 * OR ANY PART THEREOF.

 *

 * In no event will Sun Microsystems, Inc. be liable for any lost revenue

 * or profits or other special, indirect and consequential damages, even if

 * Sun has been advised of the possibility of such damages.

 *

 * Sun Microsystems, Inc.

 * 2550 Garcia Avenue

 * Mountain View, California  94043

 *

 *      from: @(#)clnt.h 1.31 94/04/29 SMI

 *      from: @(#)clnt.h        2.1 88/07/29 4.0 RPCSRC

 * $FreeBSD: src/include/rpc/clnt.h,v 1.17 2002/04/28 15:18:45 des Exp $

 */

/*

 * clnt.h - Client side remote procedure call interface.

 *

 * Copyright (C) 1984, Sun Microsystems, Inc.

 */

#ifndef _RPC_CLNT_H_

#define _RPC_CLNT_H_

#include <rpc/clnt_stat.h>

#include <sys/cdefs.h>

#include <netconfig.h>

#include <sys/un.h>

/*

 * Well-known IPV6 RPC broadcast address.

 */

#define RPCB_MULTICAST_ADDR "ff02::202"

/*

 * the following errors are in general unrecoverable.  The caller

 * should give up rather than retry.

 */

#define IS_UNRECOVERABLE_RPC(s) (((s) == RPC_AUTHERROR) || \

        ((s) == RPC_CANTENCODEARGS) || \

        ((s) == RPC_CANTDECODERES) || \

        ((s) == RPC_VERSMISMATCH) || \

        ((s) == RPC_PROCUNAVAIL) || \

        ((s) == RPC_PROGUNAVAIL) || \

        ((s) == RPC_PROGVERSMISMATCH) || \

        ((s) == RPC_CANTDECODEARGS))

/*

 * Error info.

 */

struct rpc_err {

        enum clnt_stat re_status;

        union {

                int RE_errno;           /* related system error */

                enum auth_stat RE_why;  /* why the auth error occurred */

                struct {

                        rpcvers_t low;  /* lowest version supported */

                        rpcvers_t high; /* highest version supported */

                } RE_vers;

                struct {                /* maybe meaningful if RPC_FAILED */

                        int32_t s1;

                        int32_t s2;

                } RE_lb;                /* life boot & debugging only */

        } ru;

#define re_errno        ru.RE_errno

#define re_why          ru.RE_why

#define re_vers         ru.RE_vers

#define re_lb           ru.RE_lb

};

/*

 * Client rpc handle.

 * Created by individual implementations

 * Client is responsible for initializing auth, see e.g. auth_none.c.

 */

typedef struct __rpc_client {

        AUTH    *cl_auth;                       /* authenticator */

        struct clnt_ops {

                /* call remote procedure */

                enum clnt_stat  (*cl_call)(struct __rpc_client *,

                                    rpcproc_t, xdrproc_t, void *, xdrproc_t,

                                        void *, struct timeval);

                /* abort a call */

                void            (*cl_abort)(struct __rpc_client *);

                /* get specific error code */

                void            (*cl_geterr)(struct __rpc_client *,

                                        struct rpc_err *);

                /* frees results */

                bool_t          (*cl_freeres)(struct __rpc_client *,

                                        xdrproc_t, void *);

                /* destroy this structure */

                void            (*cl_destroy)(struct __rpc_client *);

                /* the ioctl() of rpc */

                bool_t          (*cl_control)(struct __rpc_client *, u_int,

                                    void *);

        } *cl_ops;

        void                    *cl_private;    /* private stuff */

        char                    *cl_netid;      /* network token */

        char                    *cl_tp;         /* device name */

} CLIENT;

/*

 * Timers used for the pseudo-transport protocol when using datagrams

 */

struct rpc_timers {

        u_short         rt_srtt;        /* smoothed round-trip time */

        u_short         rt_deviate;     /* estimated deviation */

        u_long          rt_rtxcur;      /* current (backed-off) rto */

};

/*

 * Feedback values used for possible congestion and rate control

 */

#define FEEDBACK_REXMIT1        1       /* first retransmit */

#define FEEDBACK_OK             2       /* no retransmits */    

/* Used to set version of portmapper used in broadcast */

#define CLCR_SET_LOWVERS        3

#define CLCR_GET_LOWVERS        4

#define RPCSMALLMSGSIZE 400     /* a more reasonable packet size */

/*

 * client side rpc interface ops

 *

 * Parameter types are:

 *

 */

/*

 * enum clnt_stat

 * CLNT_CALL(rh, proc, xargs, argsp, xres, resp, timeout)

 *      CLIENT *rh;

 *      rpcproc_t proc;

 *      xdrproc_t xargs;

 *      void *argsp;

 *      xdrproc_t xres;

 *      void *resp;

 *      struct timeval timeout;

 */

#define CLNT_CALL(rh, proc, xargs, argsp, xres, resp, secs) \

        ((*(rh)->cl_ops->cl_call)(rh, proc, xargs, \

                argsp, xres, resp, secs))

#define clnt_call(rh, proc, xargs, argsp, xres, resp, secs) \

        ((*(rh)->cl_ops->cl_call)(rh, proc, xargs, \

                argsp, xres, resp, secs))

/*

 * void

 * CLNT_ABORT(rh);

 *      CLIENT *rh;

 */

#define CLNT_ABORT(rh)  ((*(rh)->cl_ops->cl_abort)(rh))

#define clnt_abort(rh)  ((*(rh)->cl_ops->cl_abort)(rh))

/*

 * struct rpc_err

 * CLNT_GETERR(rh);

 *      CLIENT *rh;

 */

#define CLNT_GETERR(rh,errp)    ((*(rh)->cl_ops->cl_geterr)(rh, errp))

#define clnt_geterr(rh,errp)    ((*(rh)->cl_ops->cl_geterr)(rh, errp))

/*

 * bool_t

 * CLNT_FREERES(rh, xres, resp);

 *      CLIENT *rh;

 *      xdrproc_t xres;

 *      void *resp;

 */

#define CLNT_FREERES(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))

#define clnt_freeres(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))

/*

 * bool_t

 * CLNT_CONTROL(cl, request, info)

 *      CLIENT *cl;

 *      u_int request;

 *      char *info;

 */

#define CLNT_CONTROL(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))

#define clnt_control(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))

/*

 * control operations that apply to both udp and tcp transports

 */

#define CLSET_TIMEOUT           1       /* set timeout (timeval) */

#define CLGET_TIMEOUT           2       /* get timeout (timeval) */

#define CLGET_SERVER_ADDR       3       /* get server's address (sockaddr) */

#define CLGET_FD                6       /* get connections file descriptor */

#define CLGET_SVC_ADDR          7       /* get server's address (netbuf) */

#define CLSET_FD_CLOSE          8       /* close fd while clnt_destroy */

#define CLSET_FD_NCLOSE         9       /* Do not close fd while clnt_destroy */

#define CLGET_XID               10      /* Get xid */

#define CLSET_XID               11      /* Set xid */

#define CLGET_VERS              12      /* Get version number */

#define CLSET_VERS              13      /* Set version number */

#define CLGET_PROG              14      /* Get program number */

#define CLSET_PROG              15      /* Set program number */

#define CLSET_SVC_ADDR          16      /* get server's address (netbuf) */

#define CLSET_PUSH_TIMOD        17      /* push timod if not already present */

#define CLSET_POP_TIMOD         18      /* pop timod */

/*

 * Connectionless only control operations

 */

#define CLSET_RETRY_TIMEOUT 4   /* set retry timeout (timeval) */

#define CLGET_RETRY_TIMEOUT 5   /* get retry timeout (timeval) */

#define CLSET_ASYNC             19

#define CLSET_CONNECT           20      /* Use connect() for UDP. (int) */

/*

 * void

 * CLNT_DESTROY(rh);

 *      CLIENT *rh;

 */

#define CLNT_DESTROY(rh)        ((*(rh)->cl_ops->cl_destroy)(rh))

#define clnt_destroy(rh)        ((*(rh)->cl_ops->cl_destroy)(rh))

/*

 * RPCTEST is a test program which is accessible on every rpc

 * transport/port.  It is used for testing, performance evaluation,

 * and network administration.

 */

#define RPCTEST_PROGRAM         ((rpcprog_t)1)

#define RPCTEST_VERSION         ((rpcvers_t)1)

#define RPCTEST_NULL_PROC       ((rpcproc_t)2)

#define RPCTEST_NULL_BATCH_PROC ((rpcproc_t)3)

/*

 * By convention, procedure 0 takes null arguments and returns them

 */

#define NULLPROC ((rpcproc_t)0)

/*

 * Below are the client handle creation routines for the various

 * implementations of client side rpc.  They can return NULL if a

 * creation failure occurs.

 */

/*

 * Generic client creation routine. Supported protocols are those that

 * belong to the nettype namespace (/etc/netconfig).

 * CLIENT *

 * clnt_create(host, prog, vers, prot);

 *      const char *host;       -- hostname

 *      const rpcprog_t prog;   -- program number

 *      const rpcvers_t vers;   -- version number

 *      const char *prot;       -- protocol

 */

__BEGIN_DECLS

extern CLIENT *clnt_create(const char *, const rpcprog_t, const rpcvers_t,

                           const char *);

/*

 *

 *      const char *hostname;                   -- hostname

 *      const rpcprog_t prog;                   -- program number

 *      const rpcvers_t vers;                   -- version number

 *      const char *nettype;                    -- network type

 */

/*

 * Generic client creation routine. Supported protocols are which belong

 * to the nettype name space.

 */

extern CLIENT *clnt_create_vers(const char *, const rpcprog_t, rpcvers_t *,

                                const rpcvers_t, const rpcvers_t,

                                const char *);

/*

 *      const char *host;               -- hostname

 *      const rpcprog_t prog;           -- program number

 *      rpcvers_t *vers_out;            -- servers highest available version

 *      const rpcvers_t vers_low;       -- low version number

 *      const rpcvers_t vers_high;      -- high version number

 *      const char *nettype;            -- network type

 */

/*

 * Generic client creation routine. It takes a netconfig structure

 * instead of nettype

 */

extern CLIENT *clnt_tp_create(const char *, const rpcprog_t,

                              const rpcvers_t, const struct netconfig *);

/*

 *      const char *hostname;                   -- hostname

 *      const rpcprog_t prog;                   -- program number

 *      const rpcvers_t vers;                   -- version number

 *      const struct netconfig *netconf;        -- network config structure

 */

/*

 * Generic TLI create routine. Only provided for compatibility.

 */

extern CLIENT *clnt_tli_create(const int, const struct netconfig *,

                               const struct netbuf *, const rpcprog_t,

                               const rpcvers_t, const u_int, const u_int);

/*

 *      const register int fd;          -- fd

 *      const struct netconfig *nconf;  -- netconfig structure

 *      const struct netbuf *svcaddr;           -- servers address

 *      const u_long prog;                      -- program number

 *      const u_long vers;                      -- version number

 *      const u_int sendsz;                     -- send size

 *      const u_int recvsz;                     -- recv size

 */

/*

 * Low level clnt create routine for connectionful transports, e.g. tcp.

 */

extern CLIENT *clnt_vc_create(const int, const struct netbuf *,

                              const rpcprog_t, const rpcvers_t,

                              const u_int, const u_int);

/*

 * Added for compatibility to old rpc 4.0. Obsoleted by clnt_vc_create().

 */

extern CLIENT *clntunix_create(struct sockaddr_un *,

                               u_long, u_long, int *, u_int, u_int);

/*

 *      const int fd;                           -- open file descriptor

 *      const struct netbuf *svcaddr;           -- servers address

 *      const rpcprog_t prog;                   -- program number

 *      const rpcvers_t vers;                   -- version number

 *      const u_int sendsz;                     -- buffer recv size

 *      const u_int recvsz;                     -- buffer send size

 */

/*

 * Low level clnt create routine for connectionless transports, e.g. udp.

 */

extern CLIENT *clnt_dg_create(const int, const struct netbuf *,

                              const rpcprog_t, const rpcvers_t,

                              const u_int, const u_int);

/*

 *      const int fd;                           -- open file descriptor

 *      const struct netbuf *svcaddr;           -- servers address

 *      const rpcprog_t program;                -- program number

 *      const rpcvers_t version;                -- version number

 *      const u_int sendsz;                     -- buffer recv size

 *      const u_int recvsz;                     -- buffer send size

 */

/*

 * Memory based rpc (for speed check and testing)

 * CLIENT *

 * clnt_raw_create(prog, vers)

 *      u_long prog;

 *      u_long vers;

 */

extern CLIENT *clnt_raw_create(rpcprog_t, rpcvers_t);

__END_DECLS

/*

 * Print why creation failed

 */

__BEGIN_DECLS

extern void clnt_pcreateerror(const char *);                    /* stderr */

extern char *clnt_spcreateerror(const char *);                  /* string */

__END_DECLS

/*

 * Like clnt_perror(), but is more verbose in its output

 */

__BEGIN_DECLS

extern void clnt_perrno(enum clnt_stat);                /* stderr */

extern char *clnt_sperrno(enum clnt_stat);              /* string */

__END_DECLS

/*

 * Print an English error message, given the client error code

 */

__BEGIN_DECLS

extern void clnt_perror(CLIENT *, const char *);                /* stderr */

extern char *clnt_sperror(CLIENT *, const char *);              /* string */

__END_DECLS

/*

 * If a creation fails, the following allows the user to figure out why.

 */

struct rpc_createerr {

        enum clnt_stat cf_stat;

        struct rpc_err cf_error; /* useful when cf_stat == RPC_PMAPFAILURE */

};

#ifdef _THREAD_SAFE

__BEGIN_DECLS

extern struct rpc_createerr     *__rpc_createerr(void);

__END_DECLS

#define rpc_createerr           (*(__rpc_createerr()))

#else

extern struct rpc_createerr rpc_createerr;

#endif /* _THREAD_SAFE */

/*

 * The simplified interface:

 * enum clnt_stat

 * rpc_call(host, prognum, versnum, procnum, inproc, in, outproc, out, nettype)

 *      const char *host;

 *      const rpcprog_t prognum;

 *      const rpcvers_t versnum;

 *      const rpcproc_t procnum;

 *      const xdrproc_t inproc, outproc;

 *      const char *in;

 *      char *out;

 *      const char *nettype;

 */

__BEGIN_DECLS

extern enum clnt_stat rpc_call(const char *, const rpcprog_t,

                               const rpcvers_t, const rpcproc_t,

                               const xdrproc_t, const char *,

                               const xdrproc_t, char *, const char *);

__END_DECLS

/*

 * RPC broadcast interface

 * The call is broadcasted to all locally connected nets.

 *

 * extern enum clnt_stat

 * rpc_broadcast(prog, vers, proc, xargs, argsp, xresults, resultsp,

 *                      eachresult, nettype)

 *      const rpcprog_t         prog;           -- program number

 *      const rpcvers_t         vers;           -- version number

 *      const rpcproc_t         proc;           -- procedure number

 *      const xdrproc_t xargs;          -- xdr routine for args

 *      caddr_t         argsp;          -- pointer to args

 *      const xdrproc_t xresults;       -- xdr routine for results

 *      caddr_t         resultsp;       -- pointer to results

 *      const resultproc_t      eachresult;     -- call with each result

 *      const char              *nettype;       -- Transport type

 *

 * For each valid response received, the procedure eachresult is called.

 * Its form is:

 *              done = eachresult(resp, raddr, nconf)

 *                      bool_t done;

 *                      caddr_t resp;

 *                      struct netbuf *raddr;

 *                      struct netconfig *nconf;

 * where resp points to the results of the call and raddr is the

 * address if the responder to the broadcast.  nconf is the transport

 * on which the response was received.

 *

 * extern enum clnt_stat

 * rpc_broadcast_exp(prog, vers, proc, xargs, argsp, xresults, resultsp,

 *                      eachresult, inittime, waittime, nettype)

 *      const rpcprog_t         prog;           -- program number

 *      const rpcvers_t         vers;           -- version number

 *      const rpcproc_t         proc;           -- procedure number

 *      const xdrproc_t xargs;          -- xdr routine for args

 *      caddr_t         argsp;          -- pointer to args

 *      const xdrproc_t xresults;       -- xdr routine for results

 *      caddr_t         resultsp;       -- pointer to results

 *      const resultproc_t      eachresult;     -- call with each result

 *      const int               inittime;       -- how long to wait initially

 *      const int               waittime;       -- maximum time to wait

 *      const char              *nettype;       -- Transport type

 */

typedef bool_t (*resultproc_t)(caddr_t, ...);

__BEGIN_DECLS

extern enum clnt_stat rpc_broadcast(const rpcprog_t, const rpcvers_t,

                                    const rpcproc_t, const xdrproc_t,

                                    caddr_t, const xdrproc_t, caddr_t,

                                    const resultproc_t, const char *);

extern enum clnt_stat rpc_broadcast_exp(const rpcprog_t, const rpcvers_t,

                                        const rpcproc_t, const xdrproc_t,

                                        caddr_t, const xdrproc_t, caddr_t,

                                        const resultproc_t, const int,

                                        const int, const char *);

__END_DECLS

/* For backward compatibility */

#include <rpc/clnt_soc.h>

#endif /* !_RPC_CLNT_H_ */