| 1 |
207 |
jeremybenn |
/*
|
| 2 |
|
|
* The authors hereby grant permission to use, copy, modify, distribute,
|
| 3 |
|
|
* and license this software and its documentation for any purpose, provided
|
| 4 |
|
|
* that existing copyright notices are retained in all copies and that this
|
| 5 |
|
|
* notice is included verbatim in any distributions. No written agreement,
|
| 6 |
|
|
* license, or royalty fee is required for any of the authorized uses.
|
| 7 |
|
|
* Modifications to this software may be copyrighted by their authors
|
| 8 |
|
|
* and need not follow the licensing terms described here, provided that
|
| 9 |
|
|
* the new terms are clearly indicated on the first page of each file where
|
| 10 |
|
|
* they apply.
|
| 11 |
|
|
*/
|
| 12 |
|
|
|
| 13 |
|
|
/*
|
| 14 |
|
|
** defBF542.h
|
| 15 |
|
|
**
|
| 16 |
|
|
** Copyright (C) 2008, 2009 Analog Devices, Inc.
|
| 17 |
|
|
**
|
| 18 |
|
|
************************************************************************************
|
| 19 |
|
|
**
|
| 20 |
|
|
** This include file contains a list of macro "defines" to enable the programmer
|
| 21 |
|
|
** to use symbolic names for register-access and bit-manipulation.
|
| 22 |
|
|
**
|
| 23 |
|
|
**/
|
| 24 |
|
|
#ifndef _DEF_BF542_H
|
| 25 |
|
|
#define _DEF_BF542_H
|
| 26 |
|
|
|
| 27 |
|
|
/* Include all Core registers and bit definitions */
|
| 28 |
|
|
#include <def_LPBlackfin.h>
|
| 29 |
|
|
|
| 30 |
|
|
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
|
| 31 |
|
|
|
| 32 |
|
|
/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
|
| 33 |
|
|
#include <defBF54x_base.h>
|
| 34 |
|
|
|
| 35 |
|
|
#ifdef _MISRA_RULES
|
| 36 |
|
|
#pragma diag(push)
|
| 37 |
|
|
#pragma diag(suppress:misra_rule_19_4:"some macros violate rule 19.4")
|
| 38 |
|
|
#pragma diag(suppress:misra_rule_19_7:"Allow function-like macros ")
|
| 39 |
|
|
#endif /* _MISRA_RULES */
|
| 40 |
|
|
|
| 41 |
|
|
/* The following are the #defines needed by ADSP-BF542 that are not in the common header */
|
| 42 |
|
|
|
| 43 |
|
|
/* ATAPI Registers */
|
| 44 |
|
|
|
| 45 |
|
|
#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
|
| 46 |
|
|
#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
|
| 47 |
|
|
#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
|
| 48 |
|
|
#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
|
| 49 |
|
|
#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
|
| 50 |
|
|
#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
|
| 51 |
|
|
#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
|
| 52 |
|
|
#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
|
| 53 |
|
|
#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
|
| 54 |
|
|
#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
|
| 55 |
|
|
#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
|
| 56 |
|
|
#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
|
| 57 |
|
|
#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
|
| 58 |
|
|
#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
|
| 59 |
|
|
#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
|
| 60 |
|
|
#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
|
| 61 |
|
|
#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
|
| 62 |
|
|
#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
|
| 63 |
|
|
#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
|
| 64 |
|
|
#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
|
| 65 |
|
|
#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
|
| 66 |
|
|
#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
|
| 67 |
|
|
#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
|
| 68 |
|
|
#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
|
| 69 |
|
|
#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
|
| 70 |
|
|
|
| 71 |
|
|
/* SDH Registers */
|
| 72 |
|
|
|
| 73 |
|
|
#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
|
| 74 |
|
|
#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
|
| 75 |
|
|
#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
|
| 76 |
|
|
#define SDH_COMMAND 0xffc0390c /* SDH Command */
|
| 77 |
|
|
#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
|
| 78 |
|
|
#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
|
| 79 |
|
|
#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
|
| 80 |
|
|
#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
|
| 81 |
|
|
#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
|
| 82 |
|
|
#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
|
| 83 |
|
|
#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
|
| 84 |
|
|
#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
|
| 85 |
|
|
#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
|
| 86 |
|
|
#define SDH_STATUS 0xffc03934 /* SDH Status */
|
| 87 |
|
|
#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
|
| 88 |
|
|
#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
|
| 89 |
|
|
#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
|
| 90 |
|
|
#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
|
| 91 |
|
|
#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
|
| 92 |
|
|
#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
|
| 93 |
|
|
#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
|
| 94 |
|
|
#define SDH_CFG 0xffc039c8 /* SDH Configuration */
|
| 95 |
|
|
#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
|
| 96 |
|
|
#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
|
| 97 |
|
|
#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
|
| 98 |
|
|
#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
|
| 99 |
|
|
#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
|
| 100 |
|
|
#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
|
| 101 |
|
|
#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
|
| 102 |
|
|
#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
|
| 103 |
|
|
#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
|
| 104 |
|
|
|
| 105 |
|
|
/* USB Control Registers */
|
| 106 |
|
|
|
| 107 |
|
|
#define USB_FADDR 0xffc03c00 /* Function address register */
|
| 108 |
|
|
#define USB_POWER 0xffc03c04 /* Power management register */
|
| 109 |
|
|
#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
|
| 110 |
|
|
#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
|
| 111 |
|
|
#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
|
| 112 |
|
|
#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
|
| 113 |
|
|
#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
|
| 114 |
|
|
#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
|
| 115 |
|
|
#define USB_FRAME 0xffc03c20 /* USB frame number */
|
| 116 |
|
|
#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
|
| 117 |
|
|
#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
|
| 118 |
|
|
#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
|
| 119 |
|
|
#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
|
| 120 |
|
|
|
| 121 |
|
|
/* USB Packet Control Registers */
|
| 122 |
|
|
|
| 123 |
|
|
#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
|
| 124 |
|
|
#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
|
| 125 |
|
|
#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
|
| 126 |
|
|
#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
|
| 127 |
|
|
#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
|
| 128 |
|
|
#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
|
| 129 |
|
|
#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
|
| 130 |
|
|
#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
|
| 131 |
|
|
#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
|
| 132 |
|
|
#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
|
| 133 |
|
|
#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
|
| 134 |
|
|
#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
|
| 135 |
|
|
#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
|
| 136 |
|
|
|
| 137 |
|
|
/* USB Endpoint FIFO Registers */
|
| 138 |
|
|
|
| 139 |
|
|
#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
|
| 140 |
|
|
#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
|
| 141 |
|
|
#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
|
| 142 |
|
|
#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
|
| 143 |
|
|
#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
|
| 144 |
|
|
#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
|
| 145 |
|
|
#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
|
| 146 |
|
|
#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
|
| 147 |
|
|
|
| 148 |
|
|
/* USB OTG Control Registers */
|
| 149 |
|
|
|
| 150 |
|
|
#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
|
| 151 |
|
|
#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
|
| 152 |
|
|
#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
|
| 153 |
|
|
|
| 154 |
|
|
/* USB Phy Control Registers */
|
| 155 |
|
|
|
| 156 |
|
|
#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
|
| 157 |
|
|
#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
|
| 158 |
|
|
#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
|
| 159 |
|
|
#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
|
| 160 |
|
|
#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
|
| 161 |
|
|
|
| 162 |
|
|
/* (APHY_CNTRL is for ADI usage only) */
|
| 163 |
|
|
|
| 164 |
|
|
#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
|
| 165 |
|
|
|
| 166 |
|
|
/* (APHY_CALIB is for ADI usage only) */
|
| 167 |
|
|
|
| 168 |
|
|
#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
|
| 169 |
|
|
#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
|
| 170 |
|
|
|
| 171 |
|
|
/* (PHY_TEST is for ADI usage only) */
|
| 172 |
|
|
|
| 173 |
|
|
#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
|
| 174 |
|
|
#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
|
| 175 |
|
|
#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
|
| 176 |
|
|
|
| 177 |
|
|
/* USB Endpoint 0 Control Registers */
|
| 178 |
|
|
|
| 179 |
|
|
#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
|
| 180 |
|
|
#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
|
| 181 |
|
|
#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
|
| 182 |
|
|
#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
|
| 183 |
|
|
#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
|
| 184 |
|
|
#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
|
| 185 |
|
|
#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
|
| 186 |
|
|
#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
|
| 187 |
|
|
#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
|
| 188 |
|
|
|
| 189 |
|
|
/* USB Endpoint 1 Control Registers */
|
| 190 |
|
|
|
| 191 |
|
|
#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
|
| 192 |
|
|
#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
|
| 193 |
|
|
#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
|
| 194 |
|
|
#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
|
| 195 |
|
|
#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
|
| 196 |
|
|
#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
|
| 197 |
|
|
#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
|
| 198 |
|
|
#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
|
| 199 |
|
|
#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
|
| 200 |
|
|
#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
|
| 201 |
|
|
|
| 202 |
|
|
/* USB Endpoint 2 Control Registers */
|
| 203 |
|
|
|
| 204 |
|
|
#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
|
| 205 |
|
|
#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
|
| 206 |
|
|
#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
|
| 207 |
|
|
#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
|
| 208 |
|
|
#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
|
| 209 |
|
|
#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
|
| 210 |
|
|
#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
|
| 211 |
|
|
#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
|
| 212 |
|
|
#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
|
| 213 |
|
|
#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
|
| 214 |
|
|
|
| 215 |
|
|
/* USB Endpoint 3 Control Registers */
|
| 216 |
|
|
|
| 217 |
|
|
#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
|
| 218 |
|
|
#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
|
| 219 |
|
|
#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
|
| 220 |
|
|
#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
|
| 221 |
|
|
#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
|
| 222 |
|
|
#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
|
| 223 |
|
|
#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
|
| 224 |
|
|
#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
|
| 225 |
|
|
#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
|
| 226 |
|
|
#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
|
| 227 |
|
|
|
| 228 |
|
|
/* USB Endpoint 4 Control Registers */
|
| 229 |
|
|
|
| 230 |
|
|
#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
|
| 231 |
|
|
#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
|
| 232 |
|
|
#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
|
| 233 |
|
|
#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
|
| 234 |
|
|
#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
|
| 235 |
|
|
#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
|
| 236 |
|
|
#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
|
| 237 |
|
|
#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
|
| 238 |
|
|
#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
|
| 239 |
|
|
#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
|
| 240 |
|
|
|
| 241 |
|
|
/* USB Endpoint 5 Control Registers */
|
| 242 |
|
|
|
| 243 |
|
|
#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
|
| 244 |
|
|
#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
|
| 245 |
|
|
#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
|
| 246 |
|
|
#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
|
| 247 |
|
|
#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
|
| 248 |
|
|
#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
|
| 249 |
|
|
#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
|
| 250 |
|
|
#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
|
| 251 |
|
|
#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
|
| 252 |
|
|
#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
|
| 253 |
|
|
|
| 254 |
|
|
/* USB Endpoint 6 Control Registers */
|
| 255 |
|
|
|
| 256 |
|
|
#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
|
| 257 |
|
|
#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
|
| 258 |
|
|
#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
|
| 259 |
|
|
#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
|
| 260 |
|
|
#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
|
| 261 |
|
|
#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
|
| 262 |
|
|
#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
|
| 263 |
|
|
#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
|
| 264 |
|
|
#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
|
| 265 |
|
|
#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
|
| 266 |
|
|
|
| 267 |
|
|
/* USB Endpoint 7 Control Registers */
|
| 268 |
|
|
|
| 269 |
|
|
#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
|
| 270 |
|
|
#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
|
| 271 |
|
|
#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
|
| 272 |
|
|
#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
|
| 273 |
|
|
#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
|
| 274 |
|
|
#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
|
| 275 |
|
|
#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
|
| 276 |
|
|
#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
|
| 277 |
|
|
#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
|
| 278 |
|
|
#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
|
| 279 |
|
|
#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
|
| 280 |
|
|
#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
|
| 281 |
|
|
|
| 282 |
|
|
/* USB Channel 0 Config Registers */
|
| 283 |
|
|
|
| 284 |
|
|
#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
|
| 285 |
|
|
#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
|
| 286 |
|
|
#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
|
| 287 |
|
|
#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
|
| 288 |
|
|
#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
|
| 289 |
|
|
|
| 290 |
|
|
/* USB Channel 1 Config Registers */
|
| 291 |
|
|
|
| 292 |
|
|
#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
|
| 293 |
|
|
#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
|
| 294 |
|
|
#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
|
| 295 |
|
|
#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
|
| 296 |
|
|
#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
|
| 297 |
|
|
|
| 298 |
|
|
/* USB Channel 2 Config Registers */
|
| 299 |
|
|
|
| 300 |
|
|
#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
|
| 301 |
|
|
#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
|
| 302 |
|
|
#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
|
| 303 |
|
|
#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
|
| 304 |
|
|
#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
|
| 305 |
|
|
|
| 306 |
|
|
/* USB Channel 3 Config Registers */
|
| 307 |
|
|
|
| 308 |
|
|
#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
|
| 309 |
|
|
#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
|
| 310 |
|
|
#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
|
| 311 |
|
|
#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
|
| 312 |
|
|
#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
|
| 313 |
|
|
|
| 314 |
|
|
/* USB Channel 4 Config Registers */
|
| 315 |
|
|
|
| 316 |
|
|
#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
|
| 317 |
|
|
#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
|
| 318 |
|
|
#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
|
| 319 |
|
|
#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
|
| 320 |
|
|
#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
|
| 321 |
|
|
|
| 322 |
|
|
/* USB Channel 5 Config Registers */
|
| 323 |
|
|
|
| 324 |
|
|
#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
|
| 325 |
|
|
#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
|
| 326 |
|
|
#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
|
| 327 |
|
|
#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
|
| 328 |
|
|
#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
|
| 329 |
|
|
|
| 330 |
|
|
/* USB Channel 6 Config Registers */
|
| 331 |
|
|
|
| 332 |
|
|
#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
|
| 333 |
|
|
#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
|
| 334 |
|
|
#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
|
| 335 |
|
|
#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
|
| 336 |
|
|
#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
|
| 337 |
|
|
|
| 338 |
|
|
/* USB Channel 7 Config Registers */
|
| 339 |
|
|
|
| 340 |
|
|
#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
|
| 341 |
|
|
#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
|
| 342 |
|
|
#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
|
| 343 |
|
|
#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
|
| 344 |
|
|
#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
|
| 345 |
|
|
|
| 346 |
|
|
/* Keypad Registers */
|
| 347 |
|
|
|
| 348 |
|
|
#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
|
| 349 |
|
|
#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
|
| 350 |
|
|
#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
|
| 351 |
|
|
#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
|
| 352 |
|
|
#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
|
| 353 |
|
|
#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
|
| 354 |
|
|
|
| 355 |
|
|
|
| 356 |
|
|
/* ********************************************************** */
|
| 357 |
|
|
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
|
| 358 |
|
|
/* and MULTI BIT READ MACROS */
|
| 359 |
|
|
/* ********************************************************** */
|
| 360 |
|
|
|
| 361 |
|
|
/* Bit masks for KPAD_CTL */
|
| 362 |
|
|
|
| 363 |
|
|
#define KPAD_EN 0x1 /* Keypad Enable */
|
| 364 |
|
|
#define nKPAD_EN 0x0
|
| 365 |
|
|
#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
|
| 366 |
|
|
#define nKPAD_IRQMODE 0x0 /* Interrupt Disabled */
|
| 367 |
|
|
#define KPAD_IRQMODE_SK 0x2 /* Single key (single row, single column) press interrupt enable */
|
| 368 |
|
|
#define KPAD_IRQMODE_MK 0x4 /* Single key press multiple key press interrupt enable */
|
| 369 |
|
|
|
| 370 |
|
|
#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
|
| 371 |
|
|
#define KPAD_COLEN 0xe000 /* Column Enable Width */
|
| 372 |
|
|
|
| 373 |
|
|
#ifdef _MISRA_RULES
|
| 374 |
|
|
#define SET_KPAD_ROWEN(x) (((x)&0x7u)<<10) /* 000: row 0 enabled, 111: rows 0-7 enabled */
|
| 375 |
|
|
#define SET_KPAD_COLEN(x) (((x)&0x7u)<<13) /* 000: column 0 enabled, 111: columns 0-7 enabled */
|
| 376 |
|
|
#else
|
| 377 |
|
|
#define SET_KPAD_ROWEN(x) (((x)&0x7)<<10) /* 000: row 0 enabled, 111: rows 0-7 enabled */
|
| 378 |
|
|
#define SET_KPAD_COLEN(x) (((x)&0x7)<<13) /* 000: column 0 enabled, 111: columns 0-7 enabled */
|
| 379 |
|
|
#endif /* _MISRA_RULES */
|
| 380 |
|
|
|
| 381 |
|
|
/* Bit masks for KPAD_PRESCALE */
|
| 382 |
|
|
|
| 383 |
|
|
#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
|
| 384 |
|
|
|
| 385 |
|
|
#ifdef _MISRA_RULES
|
| 386 |
|
|
#define SET_KPAD_PRESCALE(x) ((x)&0x3Fu) /* KPAD_PRESCALE_VAL (Key Prescale) Key Prescale Value (5:0) */
|
| 387 |
|
|
#else
|
| 388 |
|
|
#define SET_KPAD_PRESCALE(x) ((x)&0x3F) /* KPAD_PRESCALE_VAL (Key Prescale) Key Prescale Value (5:0) */
|
| 389 |
|
|
#endif /* _MISRA_RULES */
|
| 390 |
|
|
|
| 391 |
|
|
/* Bit masks for KPAD_MSEL */
|
| 392 |
|
|
|
| 393 |
|
|
#define DBON_SCALE 0xff /* Debounce Scale Value */
|
| 394 |
|
|
#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
|
| 395 |
|
|
|
| 396 |
|
|
/* Bit masks for KPAD_ROWCOL */
|
| 397 |
|
|
|
| 398 |
|
|
#define KPAD_ROW 0xff /* Rows Pressed */
|
| 399 |
|
|
#define KPAD_COL 0xff00 /* Columns Pressed */
|
| 400 |
|
|
|
| 401 |
|
|
#ifdef _MISRA_RULES
|
| 402 |
|
|
#define SET_KPAD_DBON_SCALE(x) ((x)&0xFFu) /* DBON_SCALE (Debounce Scale) Debounce Delay Multiplier Select [7:0] */
|
| 403 |
|
|
#define SET_KPAD_COLDRV_SCALE(x) (((x)&0xFFu)<<8) /* COLDRV_SCALE (Column Driver Scale) Column Driver Period Multiplier Select [15:8] */
|
| 404 |
|
|
#else
|
| 405 |
|
|
#define SET_KPAD_DBON_SCALE(x) ((x)&0xFF) /* DBON_SCALE (Debounce Scale) Debounce Delay Multiplier Select [7:0] */
|
| 406 |
|
|
#define SET_KPAD_COLDRV_SCALE(x) (((x)&0xFF)<<8) /* COLDRV_SCALE (Column Driver Scale) Column Driver Period Multiplier Select [15:8] */
|
| 407 |
|
|
#endif /* _MISRA_RULES */
|
| 408 |
|
|
|
| 409 |
|
|
/* Bit masks for KPAD_STAT */
|
| 410 |
|
|
|
| 411 |
|
|
#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
|
| 412 |
|
|
#define nKPAD_IRQ 0x0
|
| 413 |
|
|
#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
|
| 414 |
|
|
#define KPAD_PRESSED 0x8 /* Key press current status */
|
| 415 |
|
|
#define nKPAD_PRESSED 0x0
|
| 416 |
|
|
#define KPAD_NO_KEY 0x0 /* No Keypress Status*/
|
| 417 |
|
|
#define KPAD_SINGLE_KEY 0x2 /* Single Keypress Status */
|
| 418 |
|
|
#define KPAD_MKSROWCOL 0x4 /* Multiple Keypress in the same row or column Status */
|
| 419 |
|
|
#define KPAD_MKMROWCOL 0x6 /* Multiple Keypress in the same multiple rows and multiple columns Status */
|
| 420 |
|
|
|
| 421 |
|
|
/* Bit masks for KPAD_SOFTEVAL */
|
| 422 |
|
|
|
| 423 |
|
|
#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
|
| 424 |
|
|
#define nKPAD_SOFTEVAL_E 0x0
|
| 425 |
|
|
|
| 426 |
|
|
/* Bit masks for SDH_COMMAND */
|
| 427 |
|
|
|
| 428 |
|
|
#define CMD_IDX 0x3f /* Command Index */
|
| 429 |
|
|
#define CMD_RSP 0x40 /* Response */
|
| 430 |
|
|
#define nCMD_RSP 0x0
|
| 431 |
|
|
#define CMD_L_RSP 0x80 /* Long Response */
|
| 432 |
|
|
#define nCMD_L_RSP 0x0
|
| 433 |
|
|
#define CMD_INT_E 0x100 /* Command Interrupt */
|
| 434 |
|
|
#define nCMD_INT_E 0x0
|
| 435 |
|
|
#define CMD_PEND_E 0x200 /* Command Pending */
|
| 436 |
|
|
#define nCMD_PEND_E 0x0
|
| 437 |
|
|
#define CMD_E 0x400 /* Command Enable */
|
| 438 |
|
|
#define nCMD_E 0x0
|
| 439 |
|
|
|
| 440 |
|
|
/* Bit masks for SDH_PWR_CTL */
|
| 441 |
|
|
|
| 442 |
|
|
#define PWR_ON 0x3 /* Power On */
|
| 443 |
|
|
#if 0
|
| 444 |
|
|
#define TBD 0x3c /* TBD */
|
| 445 |
|
|
#endif
|
| 446 |
|
|
#define SD_CMD_OD 0x40 /* Open Drain Output */
|
| 447 |
|
|
#define nSD_CMD_OD 0x0
|
| 448 |
|
|
#define ROD_CTL 0x80 /* Rod Control */
|
| 449 |
|
|
#define nROD_CTL 0x0
|
| 450 |
|
|
|
| 451 |
|
|
/* Bit masks for SDH_CLK_CTL */
|
| 452 |
|
|
|
| 453 |
|
|
#define CLKDIV 0xff /* MC_CLK Divisor */
|
| 454 |
|
|
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
|
| 455 |
|
|
#define nCLK_E 0x0
|
| 456 |
|
|
#define PWR_SV_E 0x200 /* Power Save Enable */
|
| 457 |
|
|
#define nPWR_SV_E 0x0
|
| 458 |
|
|
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
|
| 459 |
|
|
#define nCLKDIV_BYPASS 0x0
|
| 460 |
|
|
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
|
| 461 |
|
|
#define nWIDE_BUS 0x0
|
| 462 |
|
|
|
| 463 |
|
|
/* Bit masks for SDH_RESP_CMD */
|
| 464 |
|
|
|
| 465 |
|
|
#define RESP_CMD 0x3f /* Response Command */
|
| 466 |
|
|
|
| 467 |
|
|
/* Bit masks for SDH_DATA_CTL */
|
| 468 |
|
|
|
| 469 |
|
|
#define DTX_E 0x1 /* Data Transfer Enable */
|
| 470 |
|
|
#define nDTX_E 0x0
|
| 471 |
|
|
#define DTX_DIR 0x2 /* Data Transfer Direction */
|
| 472 |
|
|
#define nDTX_DIR 0x0
|
| 473 |
|
|
#define DTX_MODE 0x4 /* Data Transfer Mode */
|
| 474 |
|
|
#define nDTX_MODE 0x0
|
| 475 |
|
|
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
|
| 476 |
|
|
#define nDTX_DMA_E 0x0
|
| 477 |
|
|
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
|
| 478 |
|
|
|
| 479 |
|
|
/* Bit masks for SDH_STATUS */
|
| 480 |
|
|
|
| 481 |
|
|
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
|
| 482 |
|
|
#define nCMD_CRC_FAIL 0x0
|
| 483 |
|
|
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
|
| 484 |
|
|
#define nDAT_CRC_FAIL 0x0
|
| 485 |
|
|
#define CMD_TIMEOUT 0x4 /* CMD Time Out */
|
| 486 |
|
|
#define nCMD_TIMEOUT 0x0
|
| 487 |
|
|
#define DAT_TIMEOUT 0x8 /* Data Time Out */
|
| 488 |
|
|
#define nDAT_TIMEOUT 0x0
|
| 489 |
|
|
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
|
| 490 |
|
|
#define nTX_UNDERRUN 0x0
|
| 491 |
|
|
#define RX_OVERRUN 0x20 /* Receive Overrun */
|
| 492 |
|
|
#define nRX_OVERRUN 0x0
|
| 493 |
|
|
#define CMD_RESP_END 0x40 /* CMD Response End */
|
| 494 |
|
|
#define nCMD_RESP_END 0x0
|
| 495 |
|
|
#define CMD_SENT 0x80 /* CMD Sent */
|
| 496 |
|
|
#define nCMD_SENT 0x0
|
| 497 |
|
|
#define DAT_END 0x100 /* Data End */
|
| 498 |
|
|
#define nDAT_END 0x0
|
| 499 |
|
|
#define START_BIT_ERR 0x200 /* Start Bit Error */
|
| 500 |
|
|
#define nSTART_BIT_ERR 0x0
|
| 501 |
|
|
#define DAT_BLK_END 0x400 /* Data Block End */
|
| 502 |
|
|
#define nDAT_BLK_END 0x0
|
| 503 |
|
|
#define CMD_ACT 0x800 /* CMD Active */
|
| 504 |
|
|
#define nCMD_ACT 0x0
|
| 505 |
|
|
#define TX_ACT 0x1000 /* Transmit Active */
|
| 506 |
|
|
#define nTX_ACT 0x0
|
| 507 |
|
|
#define RX_ACT 0x2000 /* Receive Active */
|
| 508 |
|
|
#define nRX_ACT 0x0
|
| 509 |
|
|
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
|
| 510 |
|
|
#define nTX_FIFO_STAT 0x0
|
| 511 |
|
|
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
|
| 512 |
|
|
#define nRX_FIFO_STAT 0x0
|
| 513 |
|
|
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
|
| 514 |
|
|
#define nTX_FIFO_FULL 0x0
|
| 515 |
|
|
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
|
| 516 |
|
|
#define nRX_FIFO_FULL 0x0
|
| 517 |
|
|
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
|
| 518 |
|
|
#define nTX_FIFO_ZERO 0x0
|
| 519 |
|
|
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
|
| 520 |
|
|
#define nRX_DAT_ZERO 0x0
|
| 521 |
|
|
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
|
| 522 |
|
|
#define nTX_DAT_RDY 0x0
|
| 523 |
|
|
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
|
| 524 |
|
|
#define nRX_FIFO_RDY 0x0
|
| 525 |
|
|
|
| 526 |
|
|
/* Bit masks for SDH_STATUS_CLR */
|
| 527 |
|
|
|
| 528 |
|
|
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
|
| 529 |
|
|
#define nCMD_CRC_FAIL_STAT 0x0
|
| 530 |
|
|
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
|
| 531 |
|
|
#define nDAT_CRC_FAIL_STAT 0x0
|
| 532 |
|
|
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
|
| 533 |
|
|
#define nCMD_TIMEOUT_STAT 0x0
|
| 534 |
|
|
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
|
| 535 |
|
|
#define nDAT_TIMEOUT_STAT 0x0
|
| 536 |
|
|
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
|
| 537 |
|
|
#define nTX_UNDERRUN_STAT 0x0
|
| 538 |
|
|
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
|
| 539 |
|
|
#define nRX_OVERRUN_STAT 0x0
|
| 540 |
|
|
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
|
| 541 |
|
|
#define nCMD_RESP_END_STAT 0x0
|
| 542 |
|
|
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
|
| 543 |
|
|
#define nCMD_SENT_STAT 0x0
|
| 544 |
|
|
#define DAT_END_STAT 0x100 /* Data End Status */
|
| 545 |
|
|
#define nDAT_END_STAT 0x0
|
| 546 |
|
|
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
|
| 547 |
|
|
#define nSTART_BIT_ERR_STAT 0x0
|
| 548 |
|
|
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
|
| 549 |
|
|
#define nDAT_BLK_END_STAT 0x0
|
| 550 |
|
|
|
| 551 |
|
|
/* Bit masks for SDH_MASK0 */
|
| 552 |
|
|
|
| 553 |
|
|
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
|
| 554 |
|
|
#define nCMD_CRC_FAIL_MASK 0x0
|
| 555 |
|
|
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
|
| 556 |
|
|
#define nDAT_CRC_FAIL_MASK 0x0
|
| 557 |
|
|
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
|
| 558 |
|
|
#define nCMD_TIMEOUT_MASK 0x0
|
| 559 |
|
|
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
|
| 560 |
|
|
#define nDAT_TIMEOUT_MASK 0x0
|
| 561 |
|
|
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
|
| 562 |
|
|
#define nTX_UNDERRUN_MASK 0x0
|
| 563 |
|
|
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
|
| 564 |
|
|
#define nRX_OVERRUN_MASK 0x0
|
| 565 |
|
|
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
|
| 566 |
|
|
#define nCMD_RESP_END_MASK 0x0
|
| 567 |
|
|
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
|
| 568 |
|
|
#define nCMD_SENT_MASK 0x0
|
| 569 |
|
|
#define DAT_END_MASK 0x100 /* Data End Mask */
|
| 570 |
|
|
#define nDAT_END_MASK 0x0
|
| 571 |
|
|
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
|
| 572 |
|
|
#define nSTART_BIT_ERR_MASK 0x0
|
| 573 |
|
|
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
|
| 574 |
|
|
#define nDAT_BLK_END_MASK 0x0
|
| 575 |
|
|
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
|
| 576 |
|
|
#define nCMD_ACT_MASK 0x0
|
| 577 |
|
|
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
|
| 578 |
|
|
#define nTX_ACT_MASK 0x0
|
| 579 |
|
|
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
|
| 580 |
|
|
#define nRX_ACT_MASK 0x0
|
| 581 |
|
|
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
|
| 582 |
|
|
#define nTX_FIFO_STAT_MASK 0x0
|
| 583 |
|
|
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
|
| 584 |
|
|
#define nRX_FIFO_STAT_MASK 0x0
|
| 585 |
|
|
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
|
| 586 |
|
|
#define nTX_FIFO_FULL_MASK 0x0
|
| 587 |
|
|
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
|
| 588 |
|
|
#define nRX_FIFO_FULL_MASK 0x0
|
| 589 |
|
|
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
|
| 590 |
|
|
#define nTX_FIFO_ZERO_MASK 0x0
|
| 591 |
|
|
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
|
| 592 |
|
|
#define nRX_DAT_ZERO_MASK 0x0
|
| 593 |
|
|
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
|
| 594 |
|
|
#define nTX_DAT_RDY_MASK 0x0
|
| 595 |
|
|
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
|
| 596 |
|
|
#define nRX_FIFO_RDY_MASK 0x0
|
| 597 |
|
|
|
| 598 |
|
|
/* Bit masks for SDH_FIFO_CNT */
|
| 599 |
|
|
|
| 600 |
|
|
#define FIFO_COUNT 0x7fff /* FIFO Count */
|
| 601 |
|
|
|
| 602 |
|
|
/* Bit masks for SDH_E_STATUS */
|
| 603 |
|
|
|
| 604 |
|
|
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
|
| 605 |
|
|
#define nSDIO_INT_DET 0x0
|
| 606 |
|
|
#define SD_CARD_DET 0x10 /* SD Card Detect */
|
| 607 |
|
|
#define nSD_CARD_DET 0x0
|
| 608 |
|
|
|
| 609 |
|
|
/* Bit masks for SDH_E_MASK */
|
| 610 |
|
|
|
| 611 |
|
|
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
|
| 612 |
|
|
#define nSDIO_MSK 0x0
|
| 613 |
|
|
#define SCD_MSK 0x40 /* Mask Card Detect */
|
| 614 |
|
|
#define nSCD_MSK 0x0
|
| 615 |
|
|
|
| 616 |
|
|
/* Bit masks for SDH_CFG */
|
| 617 |
|
|
|
| 618 |
|
|
#define CLKS_EN 0x1 /* Clocks Enable */
|
| 619 |
|
|
#define nCLKS_EN 0x0
|
| 620 |
|
|
#define SD4E 0x4 /* SDIO 4-Bit Enable */
|
| 621 |
|
|
#define nSD4E 0x0
|
| 622 |
|
|
#define MWE 0x8 /* Moving Window Enable */
|
| 623 |
|
|
#define nMWE 0x0
|
| 624 |
|
|
#define SD_RST 0x10 /* SDMMC Reset */
|
| 625 |
|
|
#define nSD_RST 0x0
|
| 626 |
|
|
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
|
| 627 |
|
|
#define nPUP_SDDAT 0x0
|
| 628 |
|
|
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
|
| 629 |
|
|
#define nPUP_SDDAT3 0x0
|
| 630 |
|
|
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
|
| 631 |
|
|
#define nPD_SDDAT3 0x0
|
| 632 |
|
|
|
| 633 |
|
|
/* Bit masks for SDH_RD_WAIT_EN */
|
| 634 |
|
|
|
| 635 |
|
|
#define RWR 0x1 /* Read Wait Request */
|
| 636 |
|
|
#define nRWR 0x0
|
| 637 |
|
|
|
| 638 |
|
|
/* Bit masks for ATAPI_CONTROL */
|
| 639 |
|
|
|
| 640 |
|
|
#define PIO_START 0x1 /* Start PIO/Reg Op */
|
| 641 |
|
|
#define nPIO_START 0x0
|
| 642 |
|
|
#define MULTI_START 0x2 /* Start Multi-DMA Op */
|
| 643 |
|
|
#define nMULTI_START 0x0
|
| 644 |
|
|
#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
|
| 645 |
|
|
#define nULTRA_START 0x0
|
| 646 |
|
|
#define XFER_DIR 0x8 /* Transfer Direction */
|
| 647 |
|
|
#define nXFER_DIR 0x0
|
| 648 |
|
|
#define IORDY_EN 0x10 /* IORDY Enable */
|
| 649 |
|
|
#define nIORDY_EN 0x0
|
| 650 |
|
|
#define FIFO_FLUSH 0x20 /* Flush FIFOs */
|
| 651 |
|
|
#define nFIFO_FLUSH 0x0
|
| 652 |
|
|
#define SOFT_RST 0x40 /* Soft Reset */
|
| 653 |
|
|
#define nSOFT_RST 0x0
|
| 654 |
|
|
#define DEV_RST 0x80 /* Device Reset */
|
| 655 |
|
|
#define nDEV_RST 0x0
|
| 656 |
|
|
#define TFRCNT_RST 0x100 /* Trans Count Reset */
|
| 657 |
|
|
#define nTFRCNT_RST 0x0
|
| 658 |
|
|
#define END_ON_TERM 0x200 /* End/Terminate Select */
|
| 659 |
|
|
#define nEND_ON_TERM 0x0
|
| 660 |
|
|
#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
|
| 661 |
|
|
#define nPIO_USE_DMA 0x0
|
| 662 |
|
|
#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
|
| 663 |
|
|
|
| 664 |
|
|
/* Bit masks for ATAPI_STATUS */
|
| 665 |
|
|
|
| 666 |
|
|
#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
|
| 667 |
|
|
#define nPIO_XFER_ON 0x0
|
| 668 |
|
|
#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
|
| 669 |
|
|
#define nMULTI_XFER_ON 0x0
|
| 670 |
|
|
#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
|
| 671 |
|
|
#define nULTRA_XFER_ON 0x0
|
| 672 |
|
|
#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
|
| 673 |
|
|
|
| 674 |
|
|
/* Bit masks for ATAPI_DEV_ADDR */
|
| 675 |
|
|
|
| 676 |
|
|
#define DEV_ADDR 0x1f /* Device Address */
|
| 677 |
|
|
|
| 678 |
|
|
/* Bit masks for ATAPI_INT_MASK */
|
| 679 |
|
|
|
| 680 |
|
|
#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
|
| 681 |
|
|
#define nATAPI_DEV_INT_MASK 0x0
|
| 682 |
|
|
#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
|
| 683 |
|
|
#define nPIO_DONE_MASK 0x0
|
| 684 |
|
|
#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
|
| 685 |
|
|
#define nMULTI_DONE_MASK 0x0
|
| 686 |
|
|
#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
|
| 687 |
|
|
#define nUDMAIN_DONE_MASK 0x0
|
| 688 |
|
|
#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
|
| 689 |
|
|
#define nUDMAOUT_DONE_MASK 0x0
|
| 690 |
|
|
#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
|
| 691 |
|
|
#define nHOST_TERM_XFER_MASK 0x0
|
| 692 |
|
|
#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
|
| 693 |
|
|
#define nMULTI_TERM_MASK 0x0
|
| 694 |
|
|
#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
|
| 695 |
|
|
#define nUDMAIN_TERM_MASK 0x0
|
| 696 |
|
|
#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
|
| 697 |
|
|
#define nUDMAOUT_TERM_MASK 0x0
|
| 698 |
|
|
|
| 699 |
|
|
/* Bit masks for ATAPI_INT_STATUS */
|
| 700 |
|
|
|
| 701 |
|
|
#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
|
| 702 |
|
|
#define nATAPI_DEV_INT 0x0
|
| 703 |
|
|
#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
|
| 704 |
|
|
#define nPIO_DONE_INT 0x0
|
| 705 |
|
|
#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
|
| 706 |
|
|
#define nMULTI_DONE_INT 0x0
|
| 707 |
|
|
#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
|
| 708 |
|
|
#define nUDMAIN_DONE_INT 0x0
|
| 709 |
|
|
#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
|
| 710 |
|
|
#define nUDMAOUT_DONE_INT 0x0
|
| 711 |
|
|
#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
|
| 712 |
|
|
#define nHOST_TERM_XFER_INT 0x0
|
| 713 |
|
|
#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
|
| 714 |
|
|
#define nMULTI_TERM_INT 0x0
|
| 715 |
|
|
#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
|
| 716 |
|
|
#define nUDMAIN_TERM_INT 0x0
|
| 717 |
|
|
#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
|
| 718 |
|
|
#define nUDMAOUT_TERM_INT 0x0
|
| 719 |
|
|
|
| 720 |
|
|
/* Bit masks for ATAPI_LINE_STATUS */
|
| 721 |
|
|
|
| 722 |
|
|
#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
|
| 723 |
|
|
#define nATAPI_INTR 0x0
|
| 724 |
|
|
#define ATAPI_DASP 0x2 /* Device dasp to host line status */
|
| 725 |
|
|
#define nATAPI_DASP 0x0
|
| 726 |
|
|
#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
|
| 727 |
|
|
#define nATAPI_CS0N 0x0
|
| 728 |
|
|
#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
|
| 729 |
|
|
#define nATAPI_CS1N 0x0
|
| 730 |
|
|
#define ATAPI_ADDR 0x70 /* ATAPI address line status */
|
| 731 |
|
|
#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
|
| 732 |
|
|
#define nATAPI_DMAREQ 0x0
|
| 733 |
|
|
#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
|
| 734 |
|
|
#define nATAPI_DMAACKN 0x0
|
| 735 |
|
|
#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
|
| 736 |
|
|
#define nATAPI_DIOWN 0x0
|
| 737 |
|
|
#define ATAPI_DIORN 0x400 /* ATAPI read line status */
|
| 738 |
|
|
#define nATAPI_DIORN 0x0
|
| 739 |
|
|
#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
|
| 740 |
|
|
#define nATAPI_IORDY 0x0
|
| 741 |
|
|
|
| 742 |
|
|
/* Bit masks for ATAPI_SM_STATE */
|
| 743 |
|
|
|
| 744 |
|
|
#define PIO_CSTATE 0xf /* PIO mode state machine current state */
|
| 745 |
|
|
#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
|
| 746 |
|
|
#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
|
| 747 |
|
|
#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
|
| 748 |
|
|
|
| 749 |
|
|
/* Bit masks for ATAPI_TERMINATE */
|
| 750 |
|
|
|
| 751 |
|
|
#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
|
| 752 |
|
|
#define nATAPI_HOST_TERM 0x0
|
| 753 |
|
|
|
| 754 |
|
|
/* Bit masks for ATAPI_REG_TIM_0 */
|
| 755 |
|
|
|
| 756 |
|
|
#define T2_REG 0xff /* End of cycle time for register access transfers */
|
| 757 |
|
|
#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
|
| 758 |
|
|
|
| 759 |
|
|
/* Bit masks for ATAPI_PIO_TIM_0 */
|
| 760 |
|
|
|
| 761 |
|
|
#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
|
| 762 |
|
|
#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
|
| 763 |
|
|
#define T4_REG 0xf000 /* DIOW data hold */
|
| 764 |
|
|
|
| 765 |
|
|
/* Bit masks for ATAPI_PIO_TIM_1 */
|
| 766 |
|
|
|
| 767 |
|
|
#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
|
| 768 |
|
|
|
| 769 |
|
|
/* Bit masks for ATAPI_MULTI_TIM_0 */
|
| 770 |
|
|
|
| 771 |
|
|
#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
|
| 772 |
|
|
#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
|
| 773 |
|
|
|
| 774 |
|
|
/* Bit masks for ATAPI_MULTI_TIM_1 */
|
| 775 |
|
|
|
| 776 |
|
|
#define TKW 0xff /* Selects DIOW negated pulsewidth */
|
| 777 |
|
|
#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
|
| 778 |
|
|
|
| 779 |
|
|
/* Bit masks for ATAPI_MULTI_TIM_2 */
|
| 780 |
|
|
|
| 781 |
|
|
#define TH 0xff /* Selects DIOW data hold */
|
| 782 |
|
|
#define TEOC 0xff00 /* Selects end of cycle for DMA */
|
| 783 |
|
|
|
| 784 |
|
|
/* Bit masks for ATAPI_ULTRA_TIM_0 */
|
| 785 |
|
|
|
| 786 |
|
|
#define TACK 0xff /* Selects setup and hold times for TACK */
|
| 787 |
|
|
#define TENV 0xff00 /* Selects envelope time */
|
| 788 |
|
|
|
| 789 |
|
|
/* Bit masks for ATAPI_ULTRA_TIM_1 */
|
| 790 |
|
|
|
| 791 |
|
|
#define TDVS 0xff /* Selects data valid setup time */
|
| 792 |
|
|
#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
|
| 793 |
|
|
|
| 794 |
|
|
/* Bit masks for ATAPI_ULTRA_TIM_2 */
|
| 795 |
|
|
|
| 796 |
|
|
#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
|
| 797 |
|
|
#define TMLI 0xff00 /* Selects interlock time */
|
| 798 |
|
|
|
| 799 |
|
|
/* Bit masks for ATAPI_ULTRA_TIM_3 */
|
| 800 |
|
|
|
| 801 |
|
|
#define TZAH 0xff /* Selects minimum delay required for output */
|
| 802 |
|
|
#define READY_PAUSE 0xff00 /* Selects ready to pause */
|
| 803 |
|
|
|
| 804 |
|
|
/* Bit masks for USB_FADDR */
|
| 805 |
|
|
|
| 806 |
|
|
#define FUNCTION_ADDRESS 0x7f /* Function address */
|
| 807 |
|
|
|
| 808 |
|
|
/* Bit masks for USB_POWER */
|
| 809 |
|
|
|
| 810 |
|
|
#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
|
| 811 |
|
|
#define nENABLE_SUSPENDM 0x0
|
| 812 |
|
|
#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
|
| 813 |
|
|
#define nSUSPEND_MODE 0x0
|
| 814 |
|
|
#define RESUME_MODE 0x4 /* DMA Mode */
|
| 815 |
|
|
#define nRESUME_MODE 0x0
|
| 816 |
|
|
#define RESET 0x8 /* Reset indicator */
|
| 817 |
|
|
#define nRESET 0x0
|
| 818 |
|
|
#define HS_MODE 0x10 /* High Speed mode indicator */
|
| 819 |
|
|
#define nHS_MODE 0x0
|
| 820 |
|
|
#define HS_ENABLE 0x20 /* high Speed Enable */
|
| 821 |
|
|
#define nHS_ENABLE 0x0
|
| 822 |
|
|
#define SOFT_CONN 0x40 /* Soft connect */
|
| 823 |
|
|
#define nSOFT_CONN 0x0
|
| 824 |
|
|
#define ISO_UPDATE 0x80 /* Isochronous update */
|
| 825 |
|
|
#define nISO_UPDATE 0x0
|
| 826 |
|
|
|
| 827 |
|
|
/* Bit masks for USB_INTRTX */
|
| 828 |
|
|
|
| 829 |
|
|
#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
|
| 830 |
|
|
#define nEP0_TX 0x0
|
| 831 |
|
|
#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
|
| 832 |
|
|
#define nEP1_TX 0x0
|
| 833 |
|
|
#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
|
| 834 |
|
|
#define nEP2_TX 0x0
|
| 835 |
|
|
#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
|
| 836 |
|
|
#define nEP3_TX 0x0
|
| 837 |
|
|
#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
|
| 838 |
|
|
#define nEP4_TX 0x0
|
| 839 |
|
|
#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
|
| 840 |
|
|
#define nEP5_TX 0x0
|
| 841 |
|
|
#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
|
| 842 |
|
|
#define nEP6_TX 0x0
|
| 843 |
|
|
#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
|
| 844 |
|
|
#define nEP7_TX 0x0
|
| 845 |
|
|
|
| 846 |
|
|
/* Bit masks for USB_INTRRX */
|
| 847 |
|
|
|
| 848 |
|
|
#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
|
| 849 |
|
|
#define nEP1_RX 0x0
|
| 850 |
|
|
#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
|
| 851 |
|
|
#define nEP2_RX 0x0
|
| 852 |
|
|
#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
|
| 853 |
|
|
#define nEP3_RX 0x0
|
| 854 |
|
|
#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
|
| 855 |
|
|
#define nEP4_RX 0x0
|
| 856 |
|
|
#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
|
| 857 |
|
|
#define nEP5_RX 0x0
|
| 858 |
|
|
#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
|
| 859 |
|
|
#define nEP6_RX 0x0
|
| 860 |
|
|
#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
|
| 861 |
|
|
#define nEP7_RX 0x0
|
| 862 |
|
|
|
| 863 |
|
|
/* Bit masks for USB_INTRTXE */
|
| 864 |
|
|
|
| 865 |
|
|
#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
|
| 866 |
|
|
#define nEP0_TX_E 0x0
|
| 867 |
|
|
#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
|
| 868 |
|
|
#define nEP1_TX_E 0x0
|
| 869 |
|
|
#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
|
| 870 |
|
|
#define nEP2_TX_E 0x0
|
| 871 |
|
|
#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
|
| 872 |
|
|
#define nEP3_TX_E 0x0
|
| 873 |
|
|
#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
|
| 874 |
|
|
#define nEP4_TX_E 0x0
|
| 875 |
|
|
#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
|
| 876 |
|
|
#define nEP5_TX_E 0x0
|
| 877 |
|
|
#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
|
| 878 |
|
|
#define nEP6_TX_E 0x0
|
| 879 |
|
|
#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
|
| 880 |
|
|
#define nEP7_TX_E 0x0
|
| 881 |
|
|
|
| 882 |
|
|
/* Bit masks for USB_INTRRXE */
|
| 883 |
|
|
|
| 884 |
|
|
#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
|
| 885 |
|
|
#define nEP1_RX_E 0x0
|
| 886 |
|
|
#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
|
| 887 |
|
|
#define nEP2_RX_E 0x0
|
| 888 |
|
|
#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
|
| 889 |
|
|
#define nEP3_RX_E 0x0
|
| 890 |
|
|
#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
|
| 891 |
|
|
#define nEP4_RX_E 0x0
|
| 892 |
|
|
#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
|
| 893 |
|
|
#define nEP5_RX_E 0x0
|
| 894 |
|
|
#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
|
| 895 |
|
|
#define nEP6_RX_E 0x0
|
| 896 |
|
|
#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
|
| 897 |
|
|
#define nEP7_RX_E 0x0
|
| 898 |
|
|
|
| 899 |
|
|
/* Bit masks for USB_INTRUSB */
|
| 900 |
|
|
|
| 901 |
|
|
#define SUSPEND_B 0x1 /* Suspend indicator */
|
| 902 |
|
|
#define nSUSPEND_B 0x0
|
| 903 |
|
|
#define RESUME_B 0x2 /* Resume indicator */
|
| 904 |
|
|
#define nRESUME_B 0x0
|
| 905 |
|
|
#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
|
| 906 |
|
|
#define nRESET_OR_BABLE_B 0x0
|
| 907 |
|
|
#define SOF_B 0x8 /* Start of frame */
|
| 908 |
|
|
#define nSOF_B 0x0
|
| 909 |
|
|
#define CONN_B 0x10 /* Connection indicator */
|
| 910 |
|
|
#define nCONN_B 0x0
|
| 911 |
|
|
#define DISCON_B 0x20 /* Disconnect indicator */
|
| 912 |
|
|
#define nDISCON_B 0x0
|
| 913 |
|
|
#define SESSION_REQ_B 0x40 /* Session Request */
|
| 914 |
|
|
#define nSESSION_REQ_B 0x0
|
| 915 |
|
|
#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
|
| 916 |
|
|
#define nVBUS_ERROR_B 0x0
|
| 917 |
|
|
|
| 918 |
|
|
/* Bit masks for USB_INTRUSBE */
|
| 919 |
|
|
|
| 920 |
|
|
#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
|
| 921 |
|
|
#define nSUSPEND_BE 0x0
|
| 922 |
|
|
#define RESUME_BE 0x2 /* Resume indicator int enable */
|
| 923 |
|
|
#define nRESUME_BE 0x0
|
| 924 |
|
|
#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
|
| 925 |
|
|
#define nRESET_OR_BABLE_BE 0x0
|
| 926 |
|
|
#define SOF_BE 0x8 /* Start of frame int enable */
|
| 927 |
|
|
#define nSOF_BE 0x0
|
| 928 |
|
|
#define CONN_BE 0x10 /* Connection indicator int enable */
|
| 929 |
|
|
#define nCONN_BE 0x0
|
| 930 |
|
|
#define DISCON_BE 0x20 /* Disconnect indicator int enable */
|
| 931 |
|
|
#define nDISCON_BE 0x0
|
| 932 |
|
|
#define SESSION_REQ_BE 0x40 /* Session Request int enable */
|
| 933 |
|
|
#define nSESSION_REQ_BE 0x0
|
| 934 |
|
|
#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
|
| 935 |
|
|
#define nVBUS_ERROR_BE 0x0
|
| 936 |
|
|
|
| 937 |
|
|
/* Bit masks for USB_FRAME */
|
| 938 |
|
|
|
| 939 |
|
|
#define FRAME_NUMBER 0x7ff /* Frame number */
|
| 940 |
|
|
|
| 941 |
|
|
/* Bit masks for USB_INDEX */
|
| 942 |
|
|
|
| 943 |
|
|
#define SELECTED_ENDPOINT 0xf /* selected endpoint */
|
| 944 |
|
|
|
| 945 |
|
|
/* Bit masks for USB_GLOBAL_CTL */
|
| 946 |
|
|
|
| 947 |
|
|
#define GLOBAL_ENA 0x1 /* enables USB module */
|
| 948 |
|
|
#define nGLOBAL_ENA 0x0
|
| 949 |
|
|
#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
|
| 950 |
|
|
#define nEP1_TX_ENA 0x0
|
| 951 |
|
|
#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
|
| 952 |
|
|
#define nEP2_TX_ENA 0x0
|
| 953 |
|
|
#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
|
| 954 |
|
|
#define nEP3_TX_ENA 0x0
|
| 955 |
|
|
#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
|
| 956 |
|
|
#define nEP4_TX_ENA 0x0
|
| 957 |
|
|
#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
|
| 958 |
|
|
#define nEP5_TX_ENA 0x0
|
| 959 |
|
|
#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
|
| 960 |
|
|
#define nEP6_TX_ENA 0x0
|
| 961 |
|
|
#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
|
| 962 |
|
|
#define nEP7_TX_ENA 0x0
|
| 963 |
|
|
#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
|
| 964 |
|
|
#define nEP1_RX_ENA 0x0
|
| 965 |
|
|
#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
|
| 966 |
|
|
#define nEP2_RX_ENA 0x0
|
| 967 |
|
|
#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
|
| 968 |
|
|
#define nEP3_RX_ENA 0x0
|
| 969 |
|
|
#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
|
| 970 |
|
|
#define nEP4_RX_ENA 0x0
|
| 971 |
|
|
#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
|
| 972 |
|
|
#define nEP5_RX_ENA 0x0
|
| 973 |
|
|
#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
|
| 974 |
|
|
#define nEP6_RX_ENA 0x0
|
| 975 |
|
|
#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
|
| 976 |
|
|
#define nEP7_RX_ENA 0x0
|
| 977 |
|
|
|
| 978 |
|
|
/* Bit masks for USB_OTG_DEV_CTL */
|
| 979 |
|
|
|
| 980 |
|
|
#define SESSION 0x1 /* session indicator */
|
| 981 |
|
|
#define nSESSION 0x0
|
| 982 |
|
|
#define HOST_REQ 0x2 /* Host negotiation request */
|
| 983 |
|
|
#define nHOST_REQ 0x0
|
| 984 |
|
|
#define HOST_MODE 0x4 /* indicates USBDRC is a host */
|
| 985 |
|
|
#define nHOST_MODE 0x0
|
| 986 |
|
|
#define VBUS0 0x8 /* Vbus level indicator[0] */
|
| 987 |
|
|
#define nVBUS0 0x0
|
| 988 |
|
|
#define VBUS1 0x10 /* Vbus level indicator[1] */
|
| 989 |
|
|
#define nVBUS1 0x0
|
| 990 |
|
|
#define LSDEV 0x20 /* Low-speed indicator */
|
| 991 |
|
|
#define nLSDEV 0x0
|
| 992 |
|
|
#define FSDEV 0x40 /* Full or High-speed indicator */
|
| 993 |
|
|
#define nFSDEV 0x0
|
| 994 |
|
|
#define B_DEVICE 0x80 /* A' or 'B' device indicator */
|
| 995 |
|
|
#define nB_DEVICE 0x0
|
| 996 |
|
|
|
| 997 |
|
|
/* Bit masks for USB_OTG_VBUS_IRQ */
|
| 998 |
|
|
|
| 999 |
|
|
#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
|
| 1000 |
|
|
#define nDRIVE_VBUS_ON 0x0
|
| 1001 |
|
|
#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
|
| 1002 |
|
|
#define nDRIVE_VBUS_OFF 0x0
|
| 1003 |
|
|
#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
|
| 1004 |
|
|
#define nCHRG_VBUS_START 0x0
|
| 1005 |
|
|
#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
|
| 1006 |
|
|
#define nCHRG_VBUS_END 0x0
|
| 1007 |
|
|
#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
|
| 1008 |
|
|
#define nDISCHRG_VBUS_START 0x0
|
| 1009 |
|
|
#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
|
| 1010 |
|
|
#define nDISCHRG_VBUS_END 0x0
|
| 1011 |
|
|
|
| 1012 |
|
|
/* Bit masks for USB_OTG_VBUS_MASK */
|
| 1013 |
|
|
|
| 1014 |
|
|
#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
|
| 1015 |
|
|
#define nDRIVE_VBUS_ON_ENA 0x0
|
| 1016 |
|
|
#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
|
| 1017 |
|
|
#define nDRIVE_VBUS_OFF_ENA 0x0
|
| 1018 |
|
|
#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
|
| 1019 |
|
|
#define nCHRG_VBUS_START_ENA 0x0
|
| 1020 |
|
|
#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
|
| 1021 |
|
|
#define nCHRG_VBUS_END_ENA 0x0
|
| 1022 |
|
|
#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
|
| 1023 |
|
|
#define nDISCHRG_VBUS_START_ENA 0x0
|
| 1024 |
|
|
#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
|
| 1025 |
|
|
#define nDISCHRG_VBUS_END_ENA 0x0
|
| 1026 |
|
|
|
| 1027 |
|
|
/* Bit masks for USB_CSR0 */
|
| 1028 |
|
|
|
| 1029 |
|
|
#define RXPKTRDY 0x1 /* data packet receive indicator */
|
| 1030 |
|
|
#define nRXPKTRDY 0x0
|
| 1031 |
|
|
#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
|
| 1032 |
|
|
#define nTXPKTRDY 0x0
|
| 1033 |
|
|
#define STALL_SENT 0x4 /* STALL handshake sent */
|
| 1034 |
|
|
#define nSTALL_SENT 0x0
|
| 1035 |
|
|
#define DATAEND 0x8 /* Data end indicator */
|
| 1036 |
|
|
#define nDATAEND 0x0
|
| 1037 |
|
|
#define SETUPEND 0x10 /* Setup end */
|
| 1038 |
|
|
#define nSETUPEND 0x0
|
| 1039 |
|
|
#define SENDSTALL 0x20 /* Send STALL handshake */
|
| 1040 |
|
|
#define nSENDSTALL 0x0
|
| 1041 |
|
|
#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
|
| 1042 |
|
|
#define nSERVICED_RXPKTRDY 0x0
|
| 1043 |
|
|
#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
|
| 1044 |
|
|
#define nSERVICED_SETUPEND 0x0
|
| 1045 |
|
|
#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
|
| 1046 |
|
|
#define nFLUSHFIFO 0x0
|
| 1047 |
|
|
#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
|
| 1048 |
|
|
#define nSTALL_RECEIVED_H 0x0
|
| 1049 |
|
|
#define SETUPPKT_H 0x8 /* send Setup token host mode */
|
| 1050 |
|
|
#define nSETUPPKT_H 0x0
|
| 1051 |
|
|
#define ERROR_H 0x10 /* timeout error indicator host mode */
|
| 1052 |
|
|
#define nERROR_H 0x0
|
| 1053 |
|
|
#define REQPKT_H 0x20 /* Request an IN transaction host mode */
|
| 1054 |
|
|
#define nREQPKT_H 0x0
|
| 1055 |
|
|
#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
|
| 1056 |
|
|
#define nSTATUSPKT_H 0x0
|
| 1057 |
|
|
#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
|
| 1058 |
|
|
#define nNAK_TIMEOUT_H 0x0
|
| 1059 |
|
|
|
| 1060 |
|
|
/* Bit masks for USB_COUNT0 */
|
| 1061 |
|
|
|
| 1062 |
|
|
#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
|
| 1063 |
|
|
|
| 1064 |
|
|
/* Bit masks for USB_NAKLIMIT0 */
|
| 1065 |
|
|
|
| 1066 |
|
|
#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
|
| 1067 |
|
|
|
| 1068 |
|
|
/* Bit masks for USB_TX_MAX_PACKET */
|
| 1069 |
|
|
|
| 1070 |
|
|
#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
|
| 1071 |
|
|
|
| 1072 |
|
|
/* Bit masks for USB_RX_MAX_PACKET */
|
| 1073 |
|
|
|
| 1074 |
|
|
#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
|
| 1075 |
|
|
|
| 1076 |
|
|
/* Bit masks for USB_TXCSR */
|
| 1077 |
|
|
|
| 1078 |
|
|
#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
|
| 1079 |
|
|
#define nTXPKTRDY_T 0x0
|
| 1080 |
|
|
#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
|
| 1081 |
|
|
#define nFIFO_NOT_EMPTY_T 0x0
|
| 1082 |
|
|
#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
|
| 1083 |
|
|
#define nUNDERRUN_T 0x0
|
| 1084 |
|
|
#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
|
| 1085 |
|
|
#define nFLUSHFIFO_T 0x0
|
| 1086 |
|
|
#define STALL_SEND_T 0x10 /* issue a Stall handshake */
|
| 1087 |
|
|
#define nSTALL_SEND_T 0x0
|
| 1088 |
|
|
#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
|
| 1089 |
|
|
#define nSTALL_SENT_T 0x0
|
| 1090 |
|
|
#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
|
| 1091 |
|
|
#define nCLEAR_DATATOGGLE_T 0x0
|
| 1092 |
|
|
#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
|
| 1093 |
|
|
#define nINCOMPTX_T 0x0
|
| 1094 |
|
|
#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
|
| 1095 |
|
|
#define nDMAREQMODE_T 0x0
|
| 1096 |
|
|
#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
|
| 1097 |
|
|
#define nFORCE_DATATOGGLE_T 0x0
|
| 1098 |
|
|
#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
|
| 1099 |
|
|
#define nDMAREQ_ENA_T 0x0
|
| 1100 |
|
|
#define ISO_T 0x4000 /* enable Isochronous transfers */
|
| 1101 |
|
|
#define nISO_T 0x0
|
| 1102 |
|
|
#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
|
| 1103 |
|
|
#define nAUTOSET_T 0x0
|
| 1104 |
|
|
#define ERROR_TH 0x4 /* error condition host mode */
|
| 1105 |
|
|
#define nERROR_TH 0x0
|
| 1106 |
|
|
#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
|
| 1107 |
|
|
#define nSTALL_RECEIVED_TH 0x0
|
| 1108 |
|
|
#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
|
| 1109 |
|
|
#define nNAK_TIMEOUT_TH 0x0
|
| 1110 |
|
|
|
| 1111 |
|
|
/* Bit masks for USB_TXCOUNT */
|
| 1112 |
|
|
|
| 1113 |
|
|
#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
|
| 1114 |
|
|
|
| 1115 |
|
|
/* Bit masks for USB_RXCSR */
|
| 1116 |
|
|
|
| 1117 |
|
|
#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
|
| 1118 |
|
|
#define nRXPKTRDY_R 0x0
|
| 1119 |
|
|
#define FIFO_FULL_R 0x2 /* FIFO not empty */
|
| 1120 |
|
|
#define nFIFO_FULL_R 0x0
|
| 1121 |
|
|
#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
|
| 1122 |
|
|
#define nOVERRUN_R 0x0
|
| 1123 |
|
|
#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
|
| 1124 |
|
|
#define nDATAERROR_R 0x0
|
| 1125 |
|
|
#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
|
| 1126 |
|
|
#define nFLUSHFIFO_R 0x0
|
| 1127 |
|
|
#define STALL_SEND_R 0x20 /* issue a Stall handshake */
|
| 1128 |
|
|
#define nSTALL_SEND_R 0x0
|
| 1129 |
|
|
#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
|
| 1130 |
|
|
#define nSTALL_SENT_R 0x0
|
| 1131 |
|
|
#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
|
| 1132 |
|
|
#define nCLEAR_DATATOGGLE_R 0x0
|
| 1133 |
|
|
#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
|
| 1134 |
|
|
#define nINCOMPRX_R 0x0
|
| 1135 |
|
|
#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
|
| 1136 |
|
|
#define nDMAREQMODE_R 0x0
|
| 1137 |
|
|
#define DISNYET_R 0x1000 /* disable Nyet handshakes */
|
| 1138 |
|
|
#define nDISNYET_R 0x0
|
| 1139 |
|
|
#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
|
| 1140 |
|
|
#define nDMAREQ_ENA_R 0x0
|
| 1141 |
|
|
#define ISO_R 0x4000 /* enable Isochronous transfers */
|
| 1142 |
|
|
#define nISO_R 0x0
|
| 1143 |
|
|
#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
|
| 1144 |
|
|
#define nAUTOCLEAR_R 0x0
|
| 1145 |
|
|
#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
|
| 1146 |
|
|
#define nERROR_RH 0x0
|
| 1147 |
|
|
#define REQPKT_RH 0x20 /* request an IN transaction host mode */
|
| 1148 |
|
|
#define nREQPKT_RH 0x0
|
| 1149 |
|
|
#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
|
| 1150 |
|
|
#define nSTALL_RECEIVED_RH 0x0
|
| 1151 |
|
|
#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
|
| 1152 |
|
|
#define nINCOMPRX_RH 0x0
|
| 1153 |
|
|
#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
|
| 1154 |
|
|
#define nDMAREQMODE_RH 0x0
|
| 1155 |
|
|
#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
|
| 1156 |
|
|
#define nAUTOREQ_RH 0x0
|
| 1157 |
|
|
|
| 1158 |
|
|
/* Bit masks for USB_RXCOUNT */
|
| 1159 |
|
|
|
| 1160 |
|
|
#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
|
| 1161 |
|
|
|
| 1162 |
|
|
/* Bit masks for USB_TXTYPE */
|
| 1163 |
|
|
|
| 1164 |
|
|
#define TARGET_EP_NO_T 0xf /* EP number */
|
| 1165 |
|
|
#define PROTOCOL_T 0xc /* transfer type */
|
| 1166 |
|
|
|
| 1167 |
|
|
/* Bit masks for USB_TXINTERVAL */
|
| 1168 |
|
|
|
| 1169 |
|
|
#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
|
| 1170 |
|
|
|
| 1171 |
|
|
/* Bit masks for USB_RXTYPE */
|
| 1172 |
|
|
|
| 1173 |
|
|
#define TARGET_EP_NO_R 0xf /* EP number */
|
| 1174 |
|
|
#define PROTOCOL_R 0xc /* transfer type */
|
| 1175 |
|
|
|
| 1176 |
|
|
/* Bit masks for USB_RXINTERVAL */
|
| 1177 |
|
|
|
| 1178 |
|
|
#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
|
| 1179 |
|
|
|
| 1180 |
|
|
/* Bit masks for USB_DMA_INTERRUPT */
|
| 1181 |
|
|
|
| 1182 |
|
|
#define DMA0_INT 0x1 /* DMA0 pending interrupt */
|
| 1183 |
|
|
#define nDMA0_INT 0x0
|
| 1184 |
|
|
#define DMA1_INT 0x2 /* DMA1 pending interrupt */
|
| 1185 |
|
|
#define nDMA1_INT 0x0
|
| 1186 |
|
|
#define DMA2_INT 0x4 /* DMA2 pending interrupt */
|
| 1187 |
|
|
#define nDMA2_INT 0x0
|
| 1188 |
|
|
#define DMA3_INT 0x8 /* DMA3 pending interrupt */
|
| 1189 |
|
|
#define nDMA3_INT 0x0
|
| 1190 |
|
|
#define DMA4_INT 0x10 /* DMA4 pending interrupt */
|
| 1191 |
|
|
#define nDMA4_INT 0x0
|
| 1192 |
|
|
#define DMA5_INT 0x20 /* DMA5 pending interrupt */
|
| 1193 |
|
|
#define nDMA5_INT 0x0
|
| 1194 |
|
|
#define DMA6_INT 0x40 /* DMA6 pending interrupt */
|
| 1195 |
|
|
#define nDMA6_INT 0x0
|
| 1196 |
|
|
#define DMA7_INT 0x80 /* DMA7 pending interrupt */
|
| 1197 |
|
|
#define nDMA7_INT 0x0
|
| 1198 |
|
|
|
| 1199 |
|
|
/* Bit masks for USB_DMAxCONTROL */
|
| 1200 |
|
|
|
| 1201 |
|
|
#define DMA_ENA 0x1 /* DMA enable */
|
| 1202 |
|
|
#define nDMA_ENA 0x0
|
| 1203 |
|
|
#define DIRECTION 0x2 /* direction of DMA transfer */
|
| 1204 |
|
|
#define nDIRECTION 0x0
|
| 1205 |
|
|
#define MODE 0x4 /* DMA Bus error */
|
| 1206 |
|
|
#define nMODE 0x0
|
| 1207 |
|
|
#define INT_ENA 0x8 /* Interrupt enable */
|
| 1208 |
|
|
#define nINT_ENA 0x0
|
| 1209 |
|
|
#define EPNUM 0xf0 /* EP number */
|
| 1210 |
|
|
#define BUSERROR 0x100 /* DMA Bus error */
|
| 1211 |
|
|
#define nBUSERROR 0x0
|
| 1212 |
|
|
|
| 1213 |
|
|
/* Bit masks for USB_DMAxADDRHIGH */
|
| 1214 |
|
|
|
| 1215 |
|
|
#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
|
| 1216 |
|
|
|
| 1217 |
|
|
/* Bit masks for USB_DMAxADDRLOW */
|
| 1218 |
|
|
|
| 1219 |
|
|
#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
|
| 1220 |
|
|
|
| 1221 |
|
|
/* Bit masks for USB_DMAxCOUNTHIGH */
|
| 1222 |
|
|
|
| 1223 |
|
|
#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
|
| 1224 |
|
|
|
| 1225 |
|
|
/* Bit masks for USB_DMAxCOUNTLOW */
|
| 1226 |
|
|
|
| 1227 |
|
|
#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
|
| 1228 |
|
|
|
| 1229 |
|
|
|
| 1230 |
|
|
/* ******************************************* */
|
| 1231 |
|
|
/* MULTI BIT MACRO ENUMERATIONS */
|
| 1232 |
|
|
/* ******************************************* */
|
| 1233 |
|
|
|
| 1234 |
|
|
#ifdef _MISRA_RULES
|
| 1235 |
|
|
#pragma diag(pop)
|
| 1236 |
|
|
#endif /* _MISRA_RULES */
|
| 1237 |
|
|
|
| 1238 |
|
|
#endif /* _DEF_BF542_H */
|
