Subversion Repositories openrisc

                ========= Binutils Maintainers =========

This is the list of individuals responsible for maintenance and update

of the GNU Binary Utilities project.  This includes the linker (ld),

the assembler (gas), the profiler (gprof), a whole suite of other

programs (binutils) and the libraries that they use (bfd and

opcodes).  This project shares a common set of header files with the

GCC and GDB projects (include), so maintainership of those files is

shared amoungst the projects.

The home page for binutils is:

  http://www.gnu.org/software/binutils/binutils.html

and patches should be sent to:

  binutils@sourceware.org

with "[Patch]" as part of the subject line.  Note - patches to the

top level config.guess and config.sub scripts should be sent to:

  config-patches@gnu.org

and not to the binutils lists.  Patches to the other top level

configure files (configure, configure.in, config-ml.in) should

be sent to the binutils lists, and copied to the gcc and gdb

lists as well (gcc-patches@gcc.gnu.org and

gdb-patches@sourceware.org).

                --------- Blanket Write Privs ---------

The following people have permission to check patches into the

repository without obtaining approval first:

  Nick Clifton  (head maintainer)

  Richard Henderson 

  Ian Lance Taylor 

  Jeff Law 

  Jim Wilson 

  DJ Delorie 

  Alan Modra 

  Michael Meissner 

  Daniel Jacobowitz 

  Richard Sandiford 

      --------- Maintainers ---------

Maintainers are individuals who are responsible for, and have

permission to check in changes in, certain subsets of the code.  Note

that maintainers still need approval to check in changes outside of

the immediate domain that they maintain.

If there is no maintainer for a given domain then the responsibility

falls to the head maintainer (above).  If there are several

maintainers for a given domain then responsibility falls to the first

maintainer.  The first maintainer is free to devolve that

responsibility among the other maintainers.

  ALPHA            Richard Henderson 

  ARM              Nick Clifton 

  ARM              Richard Earnshaw 

  ARM              Paul Brook 

  ARM (Symbian)    Mark Mitchell 

  AVR              Denis Chertykov 

  AVR              Marek Michalkiewicz 

  BFIN             Jie Zhang 

  BFIN             Bernd Schmidt 

  BUILD SYSTEM     Ben Elliston 

  BUILD SYSTEM     Daniel Jacobowitz 

  CR16             M R Swami Reddy 

  CRIS             Hans-Peter Nilsson 

  CRX              M R Swami Reddy 

  DLX              Nikolaos Kavvadias 

  DWARF2           Jason Merrill 

  FR30             Dave Brolley 

  FRV              Dave Brolley 

  FRV              Alexandre Oliva 

  H8300            Prafulla Thakare 

  HPPA             Dave Anglin 

  HPPA elf32       Alan Modra 

  HPPA elf64       Jeff Law  [Basic maintainance only]

  IA-64            Jim Wilson 

  IQ2000           Stan Cox 

  i860             Jason Eckhardt 

  ix86             H.J. Lu 

  ix86 PE          Christopher Faylor 

  ix86 COFF        DJ Delorie 

  ix86 PE/COFF     Dave Korn 

  ix86 INTEL MODE  Jan Beulich 

  LM32             Jon Beniston 

  M68HC11 M68HC12  Stephane Carrez 

  M88k             Mark Kettenis 

  MACH-O           Tristan Gingold 

  MAXQ             Inderpreet Singh 

  MEP              Dave Brolley 

  MICROBLAZE       Michael Eager 

  MIPS             Eric Christopher 

  MMIX             Hans-Peter Nilsson 

  MN10300          Eric Christopher 

  MN10300          Alexandre Oliva 

  Moxie            Anthony Green 

  MSP430           Dmitry Diky 

  NetBSD support   Matt Thomas 

  PPC              Geoff Keating 

  PPC              Alan Modra 

  PPC vector ext   Aldy Hernandez 

  s390, s390x      Martin Schwidefsky 

  SCORE            Mei Ligang 

  SH               Alexandre Oliva 

  SH               Kaz Kojima 

  SPARC            Jakub Jelinek 

  SPU              Alan Modra 

  TESTSUITES       Ben Elliston 

  TIC4X            Svein Seldal 

  TIC54X           Timothy Wall 

  VAX              Matt Thomas 

  VAX              Jan-Benedict Glaw 

  VMS              Tristan Gingold 

  x86_64           Jan Hubicka 

  x86_64           Andreas Jaeger 

  x86_64           H.J. Lu 

  XCOFF            Richard Sandiford 

  Xtensa           Sterling Augustine 

  z80              Arnold Metselaar 

  z8k              Christian Groessler 

      --------- CGEN Maintainers -------------

CGEN is a tool for building, amongst other things, assemblers,

disassemblers and simulators from a single description of a CPU.

It creates files in several of the binutils directories, but it

is mentioned here since there is a single group that maintains

CGEN and the files that it creates.

If you have CGEN related problems you can send email to;

   cgen@sourceware.org

The current CGEN maintainers are:

  Doug Evans, Frank Eigler

     --------- Write After Approval ---------

Individuals with "write after approval" have the ability to check in

changes, but they must get approval for each change from someone in

one of the above lists (blanket write or maintainers).

[It's a huge list, folks.  You know who you are.  If you have the

 *ability* to do binutils checkins, you're in this group.  Just

 remember to get approval before checking anything in.]

     -------------  Obvious Fixes -------------

Fixes for obvious mistakes do not need approval, and can be checked in

right away, but the patch should still be sent to the binutils list.

The definition of obvious is a bit hazy, and if you are not sure, then

you should seek approval first.  Obvious fixes include fixes for

spelling mistakes, blatantly incorrect code (where the correct code is

also blatantly obvious), and so on.  Obvious fixes should always be

small, the larger they are, the more likely it is that they contain

some un-obvious side effect or consequence.

    --------- Branch Checkins ---------

If a patch is approved for check in to the mainline sources, it can

also be checked into the current release branch.  Normally however

only bug fixes should be applied to the branch.  New features, new

ports, etc, should be restricted to the mainline.  (Otherwise the

burden of maintaining the branch in sync with the mainline becomes too

great).  If you are uncertain as to whether a patch is appropriate for

the branch, ask the branch maintainer.  This is:

   Daniel Jacobowitz  

    -------- Testsuites ---------------

In general patches to any of the binutils testsuites should be

considered generic and sent to the binutils mailing list for

approval.  Patches to target specific tests are the responsibility the

relevent port maintainer(s), and can be approved/checked in by them.

Other testsuite patches need the approval of a blanket-write-priveleges

person.

    -------- Configure patches ----------

Patches to the top level configure files (config.sub & config.guess)

are not the domain of the binutils project and they cannot be approved

by the binutils group.  Instead they should be submitted to the config

maintainer at:

        config-patches@gnu.org

    --------- Creating Branches ---------

Anyone with at least write-after-approval access may create a branch

to use for their own development purposes.  In keeping with FSF

policies, all patches applied to such a branch must come from people

with appropriate copyright assignments on file.  All legal

requirements that would apply to any other contribution apply equally

to contributions on a branch.

Before creating the branch, you should select a name for the branch of

the form:

  binutils--

where "org" is the initials of your organization, or your own initials

if you are acting as an individual.  For example, for a branch created

by The GNUDist Company, "tgc" would be an appropriate choice for

"org".  It's up to each organization to select an appropriate choice

for "name"; some organizations may use more structure than others, so

"name" may contain additional hyphens.

Suppose that The GNUDist Company was creating a branch to develop a

port of Binutils to the FullMonty processor.  Then, an appropriate

choice of branch name would be:

  binutils-tgc-fm

A date stamp is not required as part of the name field, but some

organizations like to have one.  If you do include the date, you

should follow these rules:

1. The date should be the date that the branch was created.

2. The date should be numerical and in the form YYYYMMDD.

For example:

  binutils-tgc-fm_20050101

would be appropriate if the branch was created on January 1st, 2005.

Having selected the branch name, create the branch as follows:

1. Check out binutils, so that you have a CVS checkout corresponding

   to the initial state of your branch.

2. Create a tag:

     cvs tag binutils---branchpoint

   That tag will allow you, and others, to easily determine what's

   changed on the branch relative to the initial state.

3. Create the branch:

     cvs rtag -b -r binutils---branchpoint \

       binutils---branch

4. Document the branch:

     Add a description of the branch to binutils/BRANCHES, and check

     that file in.  All branch descriptions should be added to the

     HEAD revision of the file; it doesn't help to modify

     binutils/BRANCHES on a branch!

Please do not commit any patches to a branch you did not create

without the explicit permission of the person who created the branch.