Subversion Repositories openrisc

# Makefile.in generated by automake 1.11.1 from Makefile.am.

# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,

# Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

target_triplet = @target@

DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \

        $(srcdir)/../config.sub $(srcdir)/../install-sh \

        $(srcdir)/../ltmain.sh $(srcdir)/../missing \

        $(srcdir)/../mkinstalldirs $(srcdir)/Makefile.am \

        $(srcdir)/Makefile.in $(srcdir)/config.h.in \

        $(top_srcdir)/configure $(top_srcdir)/fragment.am \

        $(top_srcdir)/scripts/testsuite_flags.in ChangeLog

subdir = .

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \

        $(top_srcdir)/../config/futex.m4 \

        $(top_srcdir)/../config/iconv.m4 \

        $(top_srcdir)/../config/lead-dot.m4 \

        $(top_srcdir)/../config/lib-ld.m4 \

        $(top_srcdir)/../config/lib-link.m4 \

        $(top_srcdir)/../config/lib-prefix.m4 \

        $(top_srcdir)/../config/multi.m4 \

        $(top_srcdir)/../config/no-executables.m4 \

        $(top_srcdir)/../config/override.m4 \

        $(top_srcdir)/../config/stdint.m4 \

        $(top_srcdir)/../config/unwind_ipinfo.m4 \

        $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \

        $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \

        $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \

        $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \

        $(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

        $(ACLOCAL_M4)

am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \

 configure.lineno config.status.lineno

CONFIG_HEADER = config.h

CONFIG_CLEAN_FILES = scripts/testsuite_flags

CONFIG_CLEAN_VPATH_FILES =

depcomp =

am__depfiles_maybe =

SOURCES =

DIST_SOURCES =

MULTISRCTOP =

MULTIBUILDTOP =

MULTIDIRS =

MULTISUBDIR =

MULTIDO = true

MULTICLEAN = true

RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \

        html-recursive info-recursive install-data-recursive \

        install-dvi-recursive install-exec-recursive \

        install-html-recursive install-info-recursive \

        install-pdf-recursive install-ps-recursive install-recursive \

        installcheck-recursive installdirs-recursive pdf-recursive \

        ps-recursive uninstall-recursive

RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

  distclean-recursive maintainer-clean-recursive

AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \

        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \

        distdir dist dist-all distcheck

ETAGS = etags

CTAGS = ctags

DIST_SUBDIRS = include libsupc++ doc src po testsuite python

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

distdir = $(PACKAGE)-$(VERSION)

top_distdir = $(distdir)

am__remove_distdir = \

  { test ! -d "$(distdir)" \

    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \

         && rm -fr "$(distdir)"; }; }

am__relativize = \

  dir0=`pwd`; \

  sed_first='s,^\([^/]*\)/.*$$,\1,'; \

  sed_rest='s,^[^/]*/*,,'; \

  sed_last='s,^.*/\([^/]*\)$$,\1,'; \

  sed_butlast='s,/*[^/]*$$,,'; \

  while test -n "$$dir1"; do \

    first=`echo "$$dir1" | sed -e "$$sed_first"`; \

    if test "$$first" != "."; then \

      if test "$$first" = ".."; then \

        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

      else \

        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

        if test "$$first2" = "$$first"; then \

          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

        else \

          dir2="../$$dir2"; \

        fi; \

        dir0="$$dir0"/"$$first"; \

      fi; \

    fi; \

    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

  done; \

  reldir="$$dir2"

DIST_ARCHIVES = $(distdir).tar.gz

GZIP_ENV = --best

distuninstallcheck_listfiles = find . -type f -print

distcleancheck_listfiles = find . -type f -print

ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@

ACLOCAL = @ACLOCAL@

ALLOCATOR_H = @ALLOCATOR_H@

ALLOCATOR_NAME = @ALLOCATOR_NAME@

AMTAR = @AMTAR@

AR = @AR@

AS = @AS@

ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@

ATOMIC_FLAGS = @ATOMIC_FLAGS@

ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

BASIC_FILE_CC = @BASIC_FILE_CC@

BASIC_FILE_H = @BASIC_FILE_H@

CC = @CC@

CCODECVT_CC = @CCODECVT_CC@

CCOLLATE_CC = @CCOLLATE_CC@

CCTYPE_CC = @CCTYPE_CC@

CFLAGS = @CFLAGS@

CLOCALE_CC = @CLOCALE_CC@

CLOCALE_H = @CLOCALE_H@

CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@

CMESSAGES_CC = @CMESSAGES_CC@

CMESSAGES_H = @CMESSAGES_H@

CMONEY_CC = @CMONEY_CC@

CNUMERIC_CC = @CNUMERIC_CC@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@

CSTDIO_H = @CSTDIO_H@

CTIME_CC = @CTIME_CC@

CTIME_H = @CTIME_H@

CXX = @CXX@

CXXCPP = @CXXCPP@

CXXFLAGS = @CXXFLAGS@

CYGPATH_W = @CYGPATH_W@

C_INCLUDE_DIR = @C_INCLUDE_DIR@

DEBUG_FLAGS = @DEBUG_FLAGS@

DEFS = @DEFS@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@

EXEEXT = @EXEEXT@

EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@

FGREP = @FGREP@

GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@

GLIBCXX_LIBS = @GLIBCXX_LIBS@

GREP = @GREP@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LD = @LD@

LDFLAGS = @LDFLAGS@

LIBICONV = @LIBICONV@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@

LIBTOOL = @LIBTOOL@

LIPO = @LIPO@

LN_S = @LN_S@

LTLIBICONV = @LTLIBICONV@

LTLIBOBJS = @LTLIBOBJS@

MAINT = @MAINT@

MAKEINFO = @MAKEINFO@

MKDIR_P = @MKDIR_P@

NM = @NM@

NMEDIT = @NMEDIT@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@

OPT_LDFLAGS = @OPT_LDFLAGS@

OS_INC_SRCDIR = @OS_INC_SRCDIR@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

RANLIB = @RANLIB@

SECTION_FLAGS = @SECTION_FLAGS@

SECTION_LDFLAGS = @SECTION_LDFLAGS@

SED = @SED@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

SYMVER_FILE = @SYMVER_FILE@

TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@

USE_NLS = @USE_NLS@

VERSION = @VERSION@

WARN_FLAGS = @WARN_FLAGS@

WERROR = @WERROR@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_CC = @ac_ct_CC@

ac_ct_CXX = @ac_ct_CXX@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__leading_dot = @am__leading_dot@

am__tar = @am__tar@

am__untar = @am__untar@

baseline_dir = @baseline_dir@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

check_msgfmt = @check_msgfmt@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

enable_shared = @enable_shared@

enable_static = @enable_static@

exec_prefix = @exec_prefix@

glibcxx_MOFILES = @glibcxx_MOFILES@

glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@

glibcxx_POFILES = @glibcxx_POFILES@

glibcxx_builddir = @glibcxx_builddir@

glibcxx_localedir = @glibcxx_localedir@

glibcxx_prefixdir = @glibcxx_prefixdir@

glibcxx_srcdir = @glibcxx_srcdir@

glibcxx_thread_h = @glibcxx_thread_h@

glibcxx_toolexecdir = @glibcxx_toolexecdir@

glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@

gxx_include_dir = @gxx_include_dir@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

libtool_VERSION = @libtool_VERSION@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

multi_basedir = @multi_basedir@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

port_specific_symbol_files = @port_specific_symbol_files@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target = @target@

target_alias = @target_alias@

target_cpu = @target_cpu@

target_os = @target_os@

target_vendor = @target_vendor@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

toplevel_srcdir = @toplevel_srcdir@

# May be used by various substitution variables.

gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)

MAINT_CHARSET = latin1

mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs

PWD_COMMAND = $${PWDCMD-pwd}

STAMP = echo timestamp >

toolexecdir = $(glibcxx_toolexecdir)

toolexeclibdir = $(glibcxx_toolexeclibdir)

# These bits are all figured out from configure.  Look in acinclude.m4

# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.

CONFIG_CXXFLAGS = \

        $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)

WARN_CXXFLAGS = \

        $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once

# -I/-D flags to pass when compiling.

AM_CPPFLAGS = $(GLIBCXX_INCLUDES)

@GLIBCXX_HOSTED_TRUE@hosted_source = doc src po testsuite

SUBDIRS = include libsupc++ $(hosted_source) python

ACLOCAL_AMFLAGS = -I . -I .. -I ../config

# Multilib support.

MAKEOVERRIDES =

# Work around what appears to be a GNU make bug handling MAKEFLAGS

# values defined in terms of make variables, as is the case for CC and

# friends when we are called from the top level Makefile.

AM_MAKEFLAGS = \

        "AR_FLAGS=$(AR_FLAGS)" \

        "CC_FOR_BUILD=$(CC_FOR_BUILD)" \

        "CC_FOR_TARGET=$(CC_FOR_TARGET)" \

        "CFLAGS=$(CFLAGS)" \

        "CXXFLAGS=$(CXXFLAGS)" \

        "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \

        "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \

        "INSTALL=$(INSTALL)" \

        "INSTALL_DATA=$(INSTALL_DATA)" \

        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \

        "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \

        "LDFLAGS=$(LDFLAGS)" \

        "LIBCFLAGS=$(LIBCFLAGS)" \

        "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \

        "MAKE=$(MAKE)" \

        "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \

        "PICFLAG=$(PICFLAG)" \

        "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \

        "SHELL=$(SHELL)" \

        "RUNTESTFLAGS=$(RUNTESTFLAGS)" \

        "exec_prefix=$(exec_prefix)" \

        "infodir=$(infodir)" \

        "libdir=$(libdir)" \

        "includedir=$(includedir)" \

        "prefix=$(prefix)" \

        "tooldir=$(tooldir)" \

        "gxx_include_dir=$(gxx_include_dir)" \

        "AR=$(AR)" \

        "AS=$(AS)" \

        "LD=$(LD)" \

        "RANLIB=$(RANLIB)" \

        "NM=$(NM)" \

        "NM_FOR_BUILD=$(NM_FOR_BUILD)" \

        "NM_FOR_TARGET=$(NM_FOR_TARGET)" \

        "DESTDIR=$(DESTDIR)" \

        "WERROR=$(WERROR)"

# Subdir rules rely on $(FLAGS_TO_PASS)

FLAGS_TO_PASS = $(AM_MAKEFLAGS)

all: config.h

        $(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:

am--refresh:

        @:

$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)

        @for dep in $?; do \

          case '$(am__configure_deps)' in \

            *$$dep*) \

              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps'; \

              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps \

                && exit 0; \

              exit 1;; \

          esac; \

        done; \

        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps Makefile'; \

        $(am__cd) $(top_srcdir) && \

          $(AUTOMAKE) --foreign --ignore-deps Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

        @case '$?' in \

          *config.status*) \

            echo ' $(SHELL) ./config.status'; \

            $(SHELL) ./config.status;; \

          *) \

            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \

            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \

        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

        $(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

        $(am__cd) $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

$(am__aclocal_m4_deps):

config.h: stamp-h1

        @if test ! -f $@; then \

          rm -f stamp-h1; \

          $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \

        else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status

        @rm -f stamp-h1

        cd $(top_builddir) && $(SHELL) ./config.status config.h

$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

        ($(am__cd) $(top_srcdir) && $(AUTOHEADER))

        rm -f stamp-h1

        touch $@

distclean-hdr:

        -rm -f config.h stamp-h1

scripts/testsuite_flags: $(top_builddir)/config.status $(top_srcdir)/scripts/testsuite_flags.in

        cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:

        -rm -f *.lo

clean-libtool:

        -rm -rf .libs _libs

distclean-libtool:

        -rm -f libtool config.lt

# GNU Make needs to see an explicit $(MAKE) variable in the command it

# runs to enable its job server during parallel builds.  Hence the

# comments below.

all-multi:

        $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)

install-multi:

        $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)

mostlyclean-multi:

        $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)

clean-multi:

        $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)

distclean-multi:

        $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)

maintainer-clean-multi:

        $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)

# This directory's subdirectories are mostly independent; you can cd

# into them and run `make' without going through this Makefile.

# To change the values of `make' variables: instead of editing Makefiles,

# (1) if the variable is set in `config.status', edit `config.status'

#     (which will cause the Makefiles to be regenerated when you run `make');

# (2) otherwise, pass the desired values on the `make' command line.

$(RECURSIVE_TARGETS):

        @fail= failcom='exit 1'; \

        for f in x $$MAKEFLAGS; do \

          case $$f in \

            *=* | --[!k]*);; \

            *k*) failcom='fail=yes';; \

          esac; \

        done; \

        dot_seen=no; \

        target=`echo $@ | sed s/-recursive//`; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            dot_seen=yes; \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

          || eval $$failcom; \

        done; \

        if test "$$dot_seen" = "no"; then \

          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

        fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):

        @fail= failcom='exit 1'; \

        for f in x $$MAKEFLAGS; do \

          case $$f in \

            *=* | --[!k]*);; \

            *k*) failcom='fail=yes';; \

          esac; \

        done; \

        dot_seen=no; \

        case "$@" in \

          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

          *) list='$(SUBDIRS)' ;; \

        esac; \

        rev=''; for subdir in $$list; do \

          if test "$$subdir" = "."; then :; else \

            rev="$$subdir $$rev"; \

          fi; \

        done; \

        rev="$$rev ."; \

        target=`echo $@ | sed s/-recursive//`; \

        for subdir in $$rev; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

          || eval $$failcom; \

        done && test -z "$$fail"

tags-recursive:

        list='$(SUBDIRS)'; for subdir in $$list; do \

          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \

        done

ctags-recursive:

        list='$(SUBDIRS)'; for subdir in $$list; do \

          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \

        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        mkid -fID $$unique

tags: TAGS

ctags: CTAGS

CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        test -z "$(CTAGS_ARGS)$$unique" \

          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

             $$unique

GTAGS:

        here=`$(am__cd) $(top_builddir) && pwd` \

          && $(am__cd) $(top_srcdir) \

          && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:

        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)

        $(am__remove_distdir)

        test -d "$(distdir)" || mkdir "$(distdir)"

        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        list='$(DISTFILES)'; \

          dist_files=`for file in $$list; do echo $$file; done | \

          sed -e "s|^$$srcdirstrip/||;t" \

              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

        case $$dist_files in \

          */*) $(MKDIR_P) `echo "$$dist_files" | \

                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

                           sort -u` ;; \

        esac; \

        for file in $$dist_files; do \

          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

          if test -d $$d/$$file; then \

            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

            if test -d "$(distdir)/$$file"; then \

              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

            fi; \

            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

            fi; \

            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

          else \

            test -f "$(distdir)/$$file" \

            || cp -p $$d/$$file "$(distdir)/$$file" \

            || exit 1; \

          fi; \

        done

        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            test -d "$(distdir)/$$subdir" \

            || $(MKDIR_P) "$(distdir)/$$subdir" \

            || exit 1; \

          fi; \

        done

        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

            $(am__relativize); \

            new_distdir=$$reldir; \

            dir1=$$subdir; dir2="$(top_distdir)"; \

            $(am__relativize); \

            new_top_distdir=$$reldir; \

            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

            ($(am__cd) $$subdir && \

              $(MAKE) $(AM_MAKEFLAGS) \

                top_distdir="$$new_top_distdir" \

                distdir="$$new_distdir" \

                am__remove_distdir=: \

                am__skip_length_check=: \

                am__skip_mode_fix=: \

                distdir) \

              || exit 1; \

          fi; \

        done

        -test -n "$(am__skip_mode_fix)" \

        || find "$(distdir)" -type d ! -perm -755 \

                -exec chmod u+rwx,go+rx {} \; -o \

          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \

          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \

          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \

        || chmod -R a+r "$(distdir)"

dist-gzip: distdir

        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz

        $(am__remove_distdir)

dist-bzip2: distdir

        tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2

        $(am__remove_distdir)

dist-lzma: distdir

        tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma

        $(am__remove_distdir)

dist-xz: distdir

        tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz

        $(am__remove_distdir)

dist-tarZ: distdir

        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z

        $(am__remove_distdir)

dist-shar: distdir

        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz

        $(am__remove_distdir)

dist-zip: distdir

        -rm -f $(distdir).zip

        zip -rq $(distdir).zip $(distdir)

        $(am__remove_distdir)

dist dist-all: distdir

        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz

        $(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then

# it guarantees that the distribution is self-contained by making another

# tarfile.

distcheck: dist

        case '$(DIST_ARCHIVES)' in \

        *.tar.gz*) \

          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\

        *.tar.bz2*) \

          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\

        *.tar.lzma*) \

          lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\

        *.tar.xz*) \

          xz -dc $(distdir).tar.xz | $(am__untar) ;;\

        *.tar.Z*) \

          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\

        *.shar.gz*) \

          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\

        *.zip*) \

          unzip $(distdir).zip ;;\

        esac

        chmod -R a-w $(distdir); chmod a+w $(distdir)

        mkdir $(distdir)/_build

        mkdir $(distdir)/_inst

        chmod a-w $(distdir)

        test -d $(distdir)/_build || exit 0; \

        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \

          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \

          && am__cwd=`pwd` \

          && $(am__cd) $(distdir)/_build \

          && ../configure --srcdir=.. --prefix="$$dc_install_base" \

            $(DISTCHECK_CONFIGURE_FLAGS) \

          && $(MAKE) $(AM_MAKEFLAGS) \

          && $(MAKE) $(AM_MAKEFLAGS) dvi \

          && $(MAKE) $(AM_MAKEFLAGS) check \

          && $(MAKE) $(AM_MAKEFLAGS) install \

          && $(MAKE) $(AM_MAKEFLAGS) installcheck \

          && $(MAKE) $(AM_MAKEFLAGS) uninstall \

          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \

                distuninstallcheck \

          && chmod -R a-w "$$dc_install_base" \

          && ({ \

               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \

               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \

               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \

               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \

                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \

              } || { rm -rf "$$dc_destdir"; exit 1; }) \

          && rm -rf "$$dc_destdir" \

          && $(MAKE) $(AM_MAKEFLAGS) dist \

          && rm -rf $(DIST_ARCHIVES) \

          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \

          && cd "$$am__cwd" \

          || exit 1

        $(am__remove_distdir)

        @(echo "$(distdir) archives ready for distribution: "; \

          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \

          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

distuninstallcheck:

        @$(am__cd) '$(distuninstallcheck_dir)' \

        && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \

           || { echo "ERROR: files left after uninstall:" ; \

                if test -n "$(DESTDIR)"; then \

                  echo "  (check DESTDIR support)"; \

                fi ; \

                $(distuninstallcheck_listfiles) ; \

                exit 1; } >&2

distcleancheck: distclean

        @if test '$(srcdir)' = . ; then \

          echo "ERROR: distcleancheck can only run from a VPATH build" ; \

          exit 1 ; \

        fi

        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \

          || { echo "ERROR: files left in build directory after distclean:" ; \

               $(distcleancheck_listfiles) ; \

               exit 1; } >&2

check-am: all-am

check: check-recursive

all-am: Makefile all-multi config.h

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

install-am: all-am

        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive

install-strip:

        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

          `test -z '$(STRIP)' || \

            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

mostlyclean-generic:

clean-generic:

distclean-generic:

        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

        @echo "This command is intended for maintainers to use"

        @echo "it deletes files that may require special tools to rebuild."

clean: clean-multi clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-multi distclean-recursive

        -rm -f $(am__CONFIG_DISTCLEAN_FILES)

        -rm -f Makefile

distclean-am: clean-am distclean-generic distclean-hdr \

        distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-multi

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-multi maintainer-clean-recursive

        -rm -f $(am__CONFIG_DISTCLEAN_FILES)

        -rm -rf $(top_srcdir)/autom4te.cache

        -rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-multi mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \

        clean-multi ctags-recursive distclean-multi install-am \

        install-multi install-strip maintainer-clean-multi \

        mostlyclean-multi tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \

        all all-am all-multi am--refresh check check-am clean \

        clean-generic clean-libtool clean-multi ctags ctags-recursive \

        dist dist-all dist-bzip2 dist-gzip dist-lzma dist-shar \

        dist-tarZ dist-xz dist-zip distcheck distclean \

        distclean-generic distclean-hdr distclean-libtool \

        distclean-multi distclean-tags distcleancheck distdir \

        distuninstallcheck dvi dvi-am html html-am info info-am \

        install install-am install-data install-data-am install-dvi \

        install-dvi-am install-exec install-exec-am install-html \

        install-html-am install-info install-info-am install-man \

        install-multi install-pdf install-pdf-am install-ps \

        install-ps-am install-strip installcheck installcheck-am \

        installdirs installdirs-am maintainer-clean \

        maintainer-clean-generic maintainer-clean-multi mostlyclean \

        mostlyclean-generic mostlyclean-libtool mostlyclean-multi pdf \

        pdf-am ps ps-am tags tags-recursive uninstall uninstall-am

# Handy forwarding targets.

check-%:

        cd testsuite && $(MAKE) $@

doc-%:

        cd doc && $(MAKE) $@

# All the machinations with string instantiations messes up the

# automake-generated TAGS rule. Make a simple one here.

TAGS: tags-recursive $(LISP)

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: