Subversion Repositories openrisc

# Makefile.in generated by automake 1.11.1 from Makefile.am.

# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,

# Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

target_triplet = @target@

DIST_COMMON = $(glibcxxinstall_HEADERS) $(srcdir)/Makefile.am \

        $(srcdir)/Makefile.in $(top_srcdir)/fragment.am

subdir = libsupc++

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \

        $(top_srcdir)/../config/futex.m4 \

        $(top_srcdir)/../config/iconv.m4 \

        $(top_srcdir)/../config/lead-dot.m4 \

        $(top_srcdir)/../config/lib-ld.m4 \

        $(top_srcdir)/../config/lib-link.m4 \

        $(top_srcdir)/../config/lib-prefix.m4 \

        $(top_srcdir)/../config/multi.m4 \

        $(top_srcdir)/../config/no-executables.m4 \

        $(top_srcdir)/../config/override.m4 \

        $(top_srcdir)/../config/stdint.m4 \

        $(top_srcdir)/../config/unwind_ipinfo.m4 \

        $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \

        $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \

        $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \

        $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \

        $(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

        $(ACLOCAL_M4)

CONFIG_HEADER = $(top_builddir)/config.h

CONFIG_CLEAN_FILES =

CONFIG_CLEAN_VPATH_FILES =

am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;

am__vpath_adj = case $$p in \

    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \

    *) f=$$p;; \

  esac;

am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;

am__install_max = 40

am__nobase_strip_setup = \

  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`

am__nobase_strip = \

  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"

am__nobase_list = $(am__nobase_strip_setup); \

  for p in $$list; do echo "$$p $$p"; done | \

  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \

  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \

    if (++n[$$2] == $(am__install_max)) \

      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \

    END { for (dir in files) print dir, files[dir] }'

am__base_list = \

  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \

  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'

am__installdirs = "$(DESTDIR)$(toolexeclibdir)" \

        "$(DESTDIR)$(glibcxxinstalldir)"

LTLIBRARIES = $(noinst_LTLIBRARIES) $(toolexeclib_LTLIBRARIES)

libsupc___la_LIBADD =

am__libsupc___la_SOURCES_DIST = array_type_info.cc atexit_arm.cc \

        bad_cast.cc bad_typeid.cc class_type_info.cc del_op.cc \

        del_opnt.cc del_opv.cc del_opvnt.cc dyncast.cc eh_alloc.cc \

        eh_arm.cc eh_aux_runtime.cc eh_call.cc eh_catch.cc \

        eh_exception.cc eh_globals.cc eh_personality.cc eh_ptr.cc \

        eh_term_handler.cc eh_terminate.cc eh_throw.cc eh_type.cc \

        eh_unex_handler.cc enum_type_info.cc function_type_info.cc \

        fundamental_type_info.cc guard.cc new_handler.cc new_op.cc \

        new_opnt.cc new_opv.cc new_opvnt.cc pbase_type_info.cc \

        pmem_type_info.cc pointer_type_info.cc pure.cc \

        si_class_type_info.cc tinfo.cc tinfo2.cc vec.cc \

        vmi_class_type_info.cc vterminate.cc cp-demangle.c

am__objects_1 = array_type_info.lo atexit_arm.lo bad_cast.lo \

        bad_typeid.lo class_type_info.lo del_op.lo del_opnt.lo \

        del_opv.lo del_opvnt.lo dyncast.lo eh_alloc.lo eh_arm.lo \

        eh_aux_runtime.lo eh_call.lo eh_catch.lo eh_exception.lo \

        eh_globals.lo eh_personality.lo eh_ptr.lo eh_term_handler.lo \

        eh_terminate.lo eh_throw.lo eh_type.lo eh_unex_handler.lo \

        enum_type_info.lo function_type_info.lo \

        fundamental_type_info.lo guard.lo new_handler.lo new_op.lo \

        new_opnt.lo new_opv.lo new_opvnt.lo pbase_type_info.lo \

        pmem_type_info.lo pointer_type_info.lo pure.lo \

        si_class_type_info.lo tinfo.lo tinfo2.lo vec.lo \

        vmi_class_type_info.lo vterminate.lo

@GLIBCXX_HOSTED_TRUE@am__objects_2 = cp-demangle.lo

am_libsupc___la_OBJECTS = $(am__objects_1) $(am__objects_2)

libsupc___la_OBJECTS = $(am_libsupc___la_OBJECTS)

libsupc__convenience_la_LIBADD =

am__libsupc__convenience_la_SOURCES_DIST = array_type_info.cc \

        atexit_arm.cc bad_cast.cc bad_typeid.cc class_type_info.cc \

        del_op.cc del_opnt.cc del_opv.cc del_opvnt.cc dyncast.cc \

        eh_alloc.cc eh_arm.cc eh_aux_runtime.cc eh_call.cc eh_catch.cc \

        eh_exception.cc eh_globals.cc eh_personality.cc eh_ptr.cc \

        eh_term_handler.cc eh_terminate.cc eh_throw.cc eh_type.cc \

        eh_unex_handler.cc enum_type_info.cc function_type_info.cc \

        fundamental_type_info.cc guard.cc new_handler.cc new_op.cc \

        new_opnt.cc new_opv.cc new_opvnt.cc pbase_type_info.cc \

        pmem_type_info.cc pointer_type_info.cc pure.cc \

        si_class_type_info.cc tinfo.cc tinfo2.cc vec.cc \

        vmi_class_type_info.cc vterminate.cc cp-demangle.c

am_libsupc__convenience_la_OBJECTS = $(am__objects_1) $(am__objects_2)

libsupc__convenience_la_OBJECTS =  \

        $(am_libsupc__convenience_la_OBJECTS)

DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)

depcomp =

am__depfiles_maybe =

COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \

        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

CCLD = $(CC)

LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \

        --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \

        $(LDFLAGS) -o $@

CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \

        $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)

CXXLD = $(CXX)

SOURCES = $(libsupc___la_SOURCES) $(libsupc__convenience_la_SOURCES)

DIST_SOURCES = $(am__libsupc___la_SOURCES_DIST) \

        $(am__libsupc__convenience_la_SOURCES_DIST)

HEADERS = $(glibcxxinstall_HEADERS)

ETAGS = etags

CTAGS = ctags

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@

ACLOCAL = @ACLOCAL@

ALLOCATOR_H = @ALLOCATOR_H@

ALLOCATOR_NAME = @ALLOCATOR_NAME@

AMTAR = @AMTAR@

AR = @AR@

AS = @AS@

ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@

ATOMIC_FLAGS = @ATOMIC_FLAGS@

ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

BASIC_FILE_CC = @BASIC_FILE_CC@

BASIC_FILE_H = @BASIC_FILE_H@

CC = @CC@

CCODECVT_CC = @CCODECVT_CC@

CCOLLATE_CC = @CCOLLATE_CC@

CCTYPE_CC = @CCTYPE_CC@

CFLAGS = @CFLAGS@

CLOCALE_CC = @CLOCALE_CC@

CLOCALE_H = @CLOCALE_H@

CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@

CMESSAGES_CC = @CMESSAGES_CC@

CMESSAGES_H = @CMESSAGES_H@

CMONEY_CC = @CMONEY_CC@

CNUMERIC_CC = @CNUMERIC_CC@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@

CSTDIO_H = @CSTDIO_H@

CTIME_CC = @CTIME_CC@

CTIME_H = @CTIME_H@

CXX = @CXX@

CXXCPP = @CXXCPP@

CXXFLAGS = @CXXFLAGS@

CYGPATH_W = @CYGPATH_W@

C_INCLUDE_DIR = @C_INCLUDE_DIR@

DEBUG_FLAGS = @DEBUG_FLAGS@

DEFS = @DEFS@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@

EXEEXT = @EXEEXT@

EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@

FGREP = @FGREP@

GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@

GLIBCXX_LIBS = @GLIBCXX_LIBS@

GREP = @GREP@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LD = @LD@

LDFLAGS = @LDFLAGS@

LIBICONV = @LIBICONV@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@

LIBTOOL = @LIBTOOL@

LIPO = @LIPO@

LN_S = @LN_S@

LTLIBICONV = @LTLIBICONV@

LTLIBOBJS = @LTLIBOBJS@

MAINT = @MAINT@

MAKEINFO = @MAKEINFO@

MKDIR_P = @MKDIR_P@

NM = @NM@

NMEDIT = @NMEDIT@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@

OPT_LDFLAGS = @OPT_LDFLAGS@

OS_INC_SRCDIR = @OS_INC_SRCDIR@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

RANLIB = @RANLIB@

SECTION_FLAGS = @SECTION_FLAGS@

SECTION_LDFLAGS = @SECTION_LDFLAGS@

SED = @SED@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

SYMVER_FILE = @SYMVER_FILE@

TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@

USE_NLS = @USE_NLS@

VERSION = @VERSION@

WARN_FLAGS = @WARN_FLAGS@

WERROR = @WERROR@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_CC = @ac_ct_CC@

ac_ct_CXX = @ac_ct_CXX@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__leading_dot = @am__leading_dot@

am__tar = @am__tar@

am__untar = @am__untar@

baseline_dir = @baseline_dir@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

check_msgfmt = @check_msgfmt@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

enable_shared = @enable_shared@

enable_static = @enable_static@

exec_prefix = @exec_prefix@

glibcxx_MOFILES = @glibcxx_MOFILES@

glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@

glibcxx_POFILES = @glibcxx_POFILES@

glibcxx_builddir = @glibcxx_builddir@

glibcxx_localedir = @glibcxx_localedir@

glibcxx_prefixdir = @glibcxx_prefixdir@

glibcxx_srcdir = @glibcxx_srcdir@

glibcxx_thread_h = @glibcxx_thread_h@

glibcxx_toolexecdir = @glibcxx_toolexecdir@

glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@

gxx_include_dir = @gxx_include_dir@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

libtool_VERSION = @libtool_VERSION@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

multi_basedir = @multi_basedir@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

port_specific_symbol_files = @port_specific_symbol_files@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target = @target@

target_alias = @target_alias@

target_cpu = @target_cpu@

target_os = @target_os@

target_vendor = @target_vendor@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

toplevel_srcdir = @toplevel_srcdir@

# May be used by various substitution variables.

gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)

MAINT_CHARSET = latin1

mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs

PWD_COMMAND = $${PWDCMD-pwd}

STAMP = echo timestamp >

toolexecdir = $(glibcxx_toolexecdir)

toolexeclibdir = $(glibcxx_toolexeclibdir)

# These bits are all figured out from configure.  Look in acinclude.m4

# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.

CONFIG_CXXFLAGS = \

        $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)

WARN_CXXFLAGS = \

        $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once

# -I/-D flags to pass when compiling.

AM_CPPFLAGS = $(GLIBCXX_INCLUDES)

# Need this library to both be part of libstdc++.a, and installed

# separately too.

# 1) separate libsupc++.la

toolexeclib_LTLIBRARIES = libsupc++.la

# 2) integrated libsupc++convenience.la that is to be a part of libstdc++.a

noinst_LTLIBRARIES = libsupc++convenience.la

headers = \

        exception new typeinfo cxxabi.h cxxabi-forced.h exception_defines.h \

        initializer_list exception_ptr.h nested_exception.h

@GLIBCXX_HOSTED_TRUE@c_sources = \

@GLIBCXX_HOSTED_TRUE@   cp-demangle.c

sources = \

        array_type_info.cc \

        atexit_arm.cc \

        bad_cast.cc \

        bad_typeid.cc \

        class_type_info.cc \

        del_op.cc \

        del_opnt.cc \

        del_opv.cc \

        del_opvnt.cc \

        dyncast.cc \

        eh_alloc.cc \

        eh_arm.cc \

        eh_aux_runtime.cc \

        eh_call.cc \

        eh_catch.cc \

        eh_exception.cc \

        eh_globals.cc \

        eh_personality.cc \

        eh_ptr.cc \

        eh_term_handler.cc \

        eh_terminate.cc \

        eh_throw.cc \

        eh_type.cc \

        eh_unex_handler.cc \

        enum_type_info.cc \

        function_type_info.cc \

        fundamental_type_info.cc \

        guard.cc \

        new_handler.cc \

        new_op.cc \

        new_opnt.cc \

        new_opv.cc \

        new_opvnt.cc \

        pbase_type_info.cc \

        pmem_type_info.cc \

        pointer_type_info.cc \

        pure.cc \

        si_class_type_info.cc \

        tinfo.cc \

        tinfo2.cc \

        vec.cc \

        vmi_class_type_info.cc \

        vterminate.cc

libsupc___la_SOURCES = $(sources) $(c_sources)

libsupc__convenience_la_SOURCES = $(sources) $(c_sources)

glibcxxinstalldir = $(gxx_include_dir)

glibcxxinstall_HEADERS = $(headers)

# AM_CXXFLAGS needs to be in each subdirectory so that it can be

# modified in a per-library or per-sub-library way.  Need to manually

# set this option because CONFIG_CXXFLAGS has to be after

# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden

# as the occasion call for it.

AM_CXXFLAGS = \

        -fno-implicit-templates \

        $(LIBSUPCXX_PICFLAGS) \

        $(WARN_CXXFLAGS) \

        $(OPTIMIZE_CXXFLAGS) \

        $(CONFIG_CXXFLAGS)

AM_MAKEFLAGS = \

        "gxx_include_dir=$(gxx_include_dir)"

# Use special rules for pulling things out of libiberty.  These

# objects should be compiled with the "C" compiler, not the C++

# compiler, and also should not use the C++ includes.

C_INCLUDES = -I.. -I$(toplevel_srcdir)/libiberty -I$(toplevel_srcdir)/include

C_COMPILE = \

        $(CC) $(DEFS) $(C_INCLUDES) \

        $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

# LTCOMPILE is copied from LTCXXCOMPILE below.

LTCOMPILE = $(LIBTOOL) --tag CC --tag disable-shared $(LIBTOOLFLAGS) --mode=compile \

            $(CC) $(DEFS) $(C_INCLUDES) $(LIBSUPCXX_PICFLAGS) \

            $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

# libstdc++ libtool notes

# 1) Need to explicitly set LTCXXCOMPILE so that AM_CXXFLAGS is

# last. (That way, things like -O2 passed down from the toplevel can

# be overridden by --enable-debug.)

# 2) In general, libtool expects an argument such as `--tag=CXX' when

# using the C++ compiler, because that will enable the settings

# detected when C++ support was being configured.  However, when no

# such flag is given in the command line, libtool attempts to figure

# it out by matching the compiler name in each configuration section

# against a prefix of the command line.  The problem is that, if the

# compiler name and its initial flags stored in the libtool

# configuration file don't match those in the command line, libtool

# can't decide which configuration to use, and it gives up.  The

# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe

# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to

# attempt to infer which configuration to use.

#

# We have to put --tag disable-shared after --tag CXX lest things

# CXX undo the affect of disable-shared.

LTCXXCOMPILE = $(LIBTOOL) --tag CXX --tag disable-shared $(LIBTOOLFLAGS) \

               --mode=compile $(CXX) $(TOPLEVEL_INCLUDES) \

               $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)

LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))

# 3) We'd have a problem when building the shared libstdc++ object if

# the rules automake generates would be used.  We cannot allow g++ to

# be used since this would add -lstdc++ to the link line which of

# course is problematic at this point.  So, we get the top-level

# directory to configure libstdc++-v3 to use gcc as the C++

# compilation driver.

CXXLINK = $(LIBTOOL) --tag CXX --tag disable-shared $(LIBTOOLFLAGS) \

          --mode=link $(CXX) \

          $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@

all: all-am

.SUFFIXES:

.SUFFIXES: .c .cc .lo .o .obj

$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)

        @for dep in $?; do \

          case '$(am__configure_deps)' in \

            *$$dep*) \

              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

                && { if test -f $@; then exit 0; else break; fi; }; \

              exit 1;; \

          esac; \

        done; \

        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps libsupc++/Makefile'; \

        $(am__cd) $(top_srcdir) && \

          $(AUTOMAKE) --foreign --ignore-deps libsupc++/Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

        @case '$?' in \

          *config.status*) \

            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

          *) \

            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(am__aclocal_m4_deps):

clean-noinstLTLIBRARIES:

        -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)

        @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \

          dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \

          test "$$dir" != "$$p" || dir=.; \

          echo "rm -f \"$${dir}/so_locations\""; \

          rm -f "$${dir}/so_locations"; \

        done

install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)

        @$(NORMAL_INSTALL)

        test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"

        @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \

        list2=; for p in $$list; do \

          if test -f $$p; then \

            list2="$$list2 $$p"; \

          else :; fi; \

        done; \

        test -z "$$list2" || { \

          echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \

          $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \

        }

uninstall-toolexeclibLTLIBRARIES:

        @$(NORMAL_UNINSTALL)

        @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \

        for p in $$list; do \

          $(am__strip_dir) \

          echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \

          $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \

        done

clean-toolexeclibLTLIBRARIES:

        -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)

        @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \

          dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \

          test "$$dir" != "$$p" || dir=.; \

          echo "rm -f \"$${dir}/so_locations\""; \

          rm -f "$${dir}/so_locations"; \

        done

libsupc++.la: $(libsupc___la_OBJECTS) $(libsupc___la_DEPENDENCIES)

        $(CXXLINK) -rpath $(toolexeclibdir) $(libsupc___la_OBJECTS) $(libsupc___la_LIBADD) $(LIBS)

libsupc++convenience.la: $(libsupc__convenience_la_OBJECTS) $(libsupc__convenience_la_DEPENDENCIES)

        $(CXXLINK)  $(libsupc__convenience_la_OBJECTS) $(libsupc__convenience_la_LIBADD) $(LIBS)

mostlyclean-compile:

        -rm -f *.$(OBJEXT)

distclean-compile:

        -rm -f *.tab.c

.c.o:

        $(COMPILE) -c $<

.c.obj:

        $(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:

        $(LTCOMPILE) -c -o $@ $<

.cc.o:

        $(CXXCOMPILE) -c -o $@ $<

.cc.obj:

        $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:

        $(LTCXXCOMPILE) -c -o $@ $<

mostlyclean-libtool:

        -rm -f *.lo

clean-libtool:

        -rm -rf .libs _libs

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        mkid -fID $$unique

tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        set x; \

        here=`pwd`; \

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        shift; \

        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

          test -n "$$unique" || unique=$$empty_fix; \

          if test $$# -gt 0; then \

            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

              "$$@" $$unique; \

          else \

            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

              $$unique; \

          fi; \

        fi

ctags: CTAGS

CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        test -z "$(CTAGS_ARGS)$$unique" \

          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

             $$unique

GTAGS:

        here=`$(am__cd) $(top_builddir) && pwd` \

          && $(am__cd) $(top_srcdir) \

          && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:

        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)

        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        list='$(DISTFILES)'; \

          dist_files=`for file in $$list; do echo $$file; done | \

          sed -e "s|^$$srcdirstrip/||;t" \

              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

        case $$dist_files in \

          */*) $(MKDIR_P) `echo "$$dist_files" | \

                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

                           sort -u` ;; \

        esac; \

        for file in $$dist_files; do \

          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

          if test -d $$d/$$file; then \

            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

            if test -d "$(distdir)/$$file"; then \

              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

            fi; \

            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

            fi; \

            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

          else \

            test -f "$(distdir)/$$file" \

            || cp -p $$d/$$file "$(distdir)/$$file" \

            || exit 1; \

          fi; \

        done

check-am: all-am

check: check-am

all-am: Makefile $(LTLIBRARIES) $(HEADERS)

installdirs:

        for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(glibcxxinstalldir)"; do \

          test -z "$$dir" || $(MKDIR_P) "$$dir"; \

        done

install: install-am

install-exec: install-exec-am

install-data: install-data-am

uninstall: uninstall-am

install-am: all-am

        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am

install-strip:

        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

          `test -z '$(STRIP)' || \

            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

mostlyclean-generic:

clean-generic:

distclean-generic:

        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

        @echo "This command is intended for maintainers to use"

        @echo "it deletes files that may require special tools to rebuild."

clean: clean-am

clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \

        clean-toolexeclibLTLIBRARIES mostlyclean-am

distclean: distclean-am

        -rm -f Makefile

distclean-am: clean-am distclean-compile distclean-generic \

        distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-glibcxxinstallHEADERS

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-toolexeclibLTLIBRARIES

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am

        -rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \

        mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-glibcxxinstallHEADERS \

        uninstall-toolexeclibLTLIBRARIES

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \

        clean-libtool clean-noinstLTLIBRARIES \

        clean-toolexeclibLTLIBRARIES ctags distclean distclean-compile \

        distclean-generic distclean-libtool distclean-tags distdir dvi \

        dvi-am html html-am info info-am install install-am \

        install-data install-data-am install-dvi install-dvi-am \

        install-exec install-exec-am install-glibcxxinstallHEADERS \

        install-html install-html-am install-info install-info-am \

        install-man install-pdf install-pdf-am install-ps \

        install-ps-am install-strip install-toolexeclibLTLIBRARIES \

        installcheck installcheck-am installdirs maintainer-clean \

        maintainer-clean-generic mostlyclean mostlyclean-compile \

        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \

        tags uninstall uninstall-am uninstall-glibcxxinstallHEADERS \

        uninstall-toolexeclibLTLIBRARIES

cp-demangle.c:

        rm -f $@

        $(LN_S) $(toplevel_srcdir)/libiberty/cp-demangle.c $@

cp-demangle.lo: cp-demangle.c

        $(LTCOMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<

cp-demangle.o: cp-demangle.c

        $(C_COMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<

# We have to have rules modified from the default to counteract SUN make

# prepending each of $(glibcxxinstall_HEADERS) with VPATH below.

install-glibcxxinstallHEADERS: $(glibcxxinstall_HEADERS)

        @$(NORMAL_INSTALL)

        $(mkinstalldirs) $(DESTDIR)$(glibcxxinstalldir)

        @list='$(glibcxxinstall_HEADERS)'; for p in $$list; do \

          q=`echo $$p | sed -e 's,.*/,,'`; \

          if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \

          echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(glibcxxinstalldir)/$$q"; \

          $(INSTALL_DATA) $$d$$p $(DESTDIR)$(glibcxxinstalldir)/$$q; \

        done

uninstall-glibcxxinstallHEADERS:

        @$(NORMAL_UNINSTALL)

        list='$(glibcxxinstall_HEADERS)'; for p in $$list; do \

          q=`echo $$p | sed -e 's,.*/,,'`; \

          rm -f $(DESTDIR)$(glibcxxinstalldir)/$$q; \

        done

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: