Subversion Repositories openrisc

/* Remote serial support interface definitions for GDB, the GNU Debugger.

   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2004,

   2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

#ifndef SERIAL_H

#define SERIAL_H

#ifdef USE_WIN32API

#include <winsock2.h>

#include <windows.h>

#endif

struct ui_file;

/* For most routines, if a failure is indicated, then errno should be

   examined.  */

/* Terminal state pointer.  This is specific to each type of

   interface.  */

typedef void *serial_ttystate;

struct serial;

/* Try to open NAME.  Returns a new `struct serial *' on success, NULL

   on failure. Note that some open calls can block and, if possible,

   should be  written to be non-blocking, with calls to ui_look_hook

   so they can be cancelled. An async interface for open could be

   added to GDB if necessary.  */

extern struct serial *serial_open (const char *name);

/* Find an already opened serial stream using a file handle.  */

extern struct serial *serial_for_fd (int fd);

/* Open a new serial stream using a file handle.  */

extern struct serial *serial_fdopen (const int fd);

/* Push out all buffers, close the device and destroy SCB.  */

extern void serial_close (struct serial *scb);

/* Push out all buffers and destroy SCB without closing the device.  */

extern void serial_un_fdopen (struct serial *scb);

/* Read one char from the serial device with TIMEOUT seconds to wait

   or -1 to wait forever.  Use timeout of 0 to effect a poll.

   Infinite waits are not permitted. Returns unsigned char if ok, else

   one of the following codes.  Note that all error return-codes are

   guaranteed to be < 0.  */

enum serial_rc {

  SERIAL_ERROR = -1,    /* General error.  */

  SERIAL_TIMEOUT = -2,  /* Timeout or data-not-ready during read.

                           Unfortunately, through

                           deprecated_ui_loop_hook (), this can also

                           be a QUIT indication.  */

  SERIAL_EOF = -3       /* General end-of-file or remote target

                           connection closed, indication.  Includes

                           things like the line dropping dead.  */

};

extern int serial_readchar (struct serial *scb, int timeout);

/* Write LEN chars from STRING to the port SCB.  Returns 0 for

   success, non-zero for failure.  */

extern int serial_write (struct serial *scb, const char *str, int len);

/* Write a printf style string onto the serial port.  */

extern void serial_printf (struct serial *desc,

                           const char *,...) ATTRIBUTE_PRINTF (2, 3);

/* Allow pending output to drain.  */

extern int serial_drain_output (struct serial *);

/* Flush (discard) pending output.  Might also flush input (if this

   system can't flush only output).  */

extern int serial_flush_output (struct serial *);

/* Flush pending input.  Might also flush output (if this system can't

   flush only input).  */

extern int serial_flush_input (struct serial *);

/* Send a break between 0.25 and 0.5 seconds long.  */

extern int serial_send_break (struct serial *scb);

/* Turn the port into raw mode.  */

extern void serial_raw (struct serial *scb);

/* Return a pointer to a newly malloc'd ttystate containing the state

   of the tty.  */

extern serial_ttystate serial_get_tty_state (struct serial *scb);

/* Set the state of the tty to TTYSTATE.  The change is immediate.

   When changing to or from raw mode, input might be discarded.

   Returns 0 for success, negative value for error (in which case

   errno contains the error).  */

extern int serial_set_tty_state (struct serial *scb, serial_ttystate ttystate);

/* printf_filtered a user-comprehensible description of ttystate on

   the specified STREAM. FIXME: At present this sends output to the

   default stream - GDB_STDOUT.  */

extern void serial_print_tty_state (struct serial *scb, serial_ttystate ttystate, struct ui_file *);

/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the

   current state (generally obtained from a recent call to

   serial_get_tty_state()), but be careful not to discard any input.

   This means that we never switch in or out of raw mode, even if

   NEW_TTYSTATE specifies a switch.  */

extern int serial_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate);

/* Set the baudrate to the decimal value supplied.  Returns 0 for

   success, -1 for failure.  */

extern int serial_setbaudrate (struct serial *scb, int rate);

/* Set the number of stop bits to the value specified.  Returns 0 for

   success, -1 for failure.  */

#define SERIAL_1_STOPBITS 1

#define SERIAL_1_AND_A_HALF_STOPBITS 2  /* 1.5 bits, snicker...  */

#define SERIAL_2_STOPBITS 3

extern int serial_setstopbits (struct serial *scb, int num);

/* Asynchronous serial interface: */

/* Can the serial device support asynchronous mode? */

extern int serial_can_async_p (struct serial *scb);

/* Has the serial device been put in asynchronous mode? */

extern int serial_is_async_p (struct serial *scb);

/* For ASYNC enabled devices, register a callback and enable

   asynchronous mode.  To disable asynchronous mode, register a NULL

   callback.  */

typedef void (serial_event_ftype) (struct serial *scb, void *context);

extern void serial_async (struct serial *scb, serial_event_ftype *handler, void *context);

/* Provide direct access to the underlying FD (if any) used to

   implement the serial device.  This interface is clearly

   deprecated. Will call internal_error() if the operation isn't

   applicable to the current serial device.  */

extern int deprecated_serial_fd (struct serial *scb);

/* Trace/debug mechanism.

   serial_debug() enables/disables internal debugging.

   serial_debug_p() indicates the current debug state.  */

extern void serial_debug (struct serial *scb, int debug_p);

extern int serial_debug_p (struct serial *scb);

/* Details of an instance of a serial object */

struct serial

  {

    int fd;                     /* File descriptor */

    /* File descriptor for a separate error stream that should be

       immediately forwarded to gdb_stderr.  This may be -1.

       If != -1, this descriptor should be non-blocking or

       ops->avail should be non-NULL.  */

    int error_fd;

    struct serial_ops *ops;     /* Function vector */

    void *state;                /* Local context info for open FD */

    serial_ttystate ttystate;   /* Not used (yet) */

    int bufcnt;                 /* Amount of data remaining in receive

                                   buffer.  -ve for sticky errors.  */

    unsigned char *bufp;        /* Current byte */

    unsigned char buf[BUFSIZ];  /* Da buffer itself */

    int current_timeout;        /* (ser-unix.c termio{,s} only), last

                                   value of VTIME */

    int timeout_remaining;      /* (ser-unix.c termio{,s} only), we

                                   still need to wait for this many

                                   more seconds.  */

    char *name;                 /* The name of the device or host */

    struct serial *next;        /* Pointer to the next `struct serial *' */

    int refcnt;                 /* Number of pointers to this block */

    int debug_p;                /* Trace this serial devices operation.  */

    int async_state;            /* Async internal state.  */

    void *async_context;        /* Async event thread's context */

    serial_event_ftype *async_handler;/* Async event handler */

  };

struct serial_ops

  {

    char *name;

    struct serial_ops *next;

    int (*open) (struct serial *, const char *name);

    void (*close) (struct serial *);

    int (*readchar) (struct serial *, int timeout);

    int (*write) (struct serial *, const char *str, int len);

    /* Discard pending output */

    int (*flush_output) (struct serial *);

    /* Discard pending input */

    int (*flush_input) (struct serial *);

    int (*send_break) (struct serial *);

    void (*go_raw) (struct serial *);

    serial_ttystate (*get_tty_state) (struct serial *);

    int (*set_tty_state) (struct serial *, serial_ttystate);

    void (*print_tty_state) (struct serial *, serial_ttystate,

                             struct ui_file *);

    int (*noflush_set_tty_state) (struct serial *, serial_ttystate,

                                  serial_ttystate);

    int (*setbaudrate) (struct serial *, int rate);

    int (*setstopbits) (struct serial *, int num);

    /* Wait for output to drain */

    int (*drain_output) (struct serial *);

    /* Change the serial device into/out of asynchronous mode, call

       the specified function when ever there is something

       interesting.  */

    void (*async) (struct serial *scb, int async_p);

    /* Perform a low-level read operation, reading (at most) COUNT

       bytes into SCB->BUF.  Return zero at end of file.  */

    int (*read_prim)(struct serial *scb, size_t count);

    /* Perform a low-level write operation, writing (at most) COUNT

       bytes from BUF.  */

    int (*write_prim)(struct serial *scb, const void *buf, size_t count);

    /* Return that number of bytes that can be read from FD

       without blocking.  Return value of -1 means that the

       the read will not block even if less that requested bytes

       are available.  */

    int (*avail)(struct serial *scb, int fd);

#ifdef USE_WIN32API

    /* Return a handle to wait on, indicating available data from SCB

       when signaled, in *READ.  Return a handle indicating errors

       in *EXCEPT.  */

    void (*wait_handle) (struct serial *scb, HANDLE *read, HANDLE *except);

    void (*done_wait_handle) (struct serial *scb);

#endif /* USE_WIN32API */

  };

/* Add a new serial interface to the interface list */

extern void serial_add_interface (struct serial_ops * optable);

/* File in which to record the remote debugging session */

extern void serial_log_command (const char *);

#ifdef USE_WIN32API

/* Windows-only: find or create handles that we can wait on for this

   serial device.  */

extern void serial_wait_handle (struct serial *, HANDLE *, HANDLE *);

/* Windows-only: signal that we are done with the wait handles.  */

extern void serial_done_wait_handle (struct serial *);

#endif /* USE_WIN32API */

#endif /* SERIAL_H */