Subversion Repositories openrisc

/*  arminit.c -- ARMulator initialization:  ARM6 Instruction Emulator.

    Copyright (C) 1994 Advanced RISC Machines Ltd.

    This program is free software; you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation; either version 2 of the License, or

    (at your option) any later version.

    This program is distributed in the hope that it will be useful,

    but WITHOUT ANY WARRANTY; without even the implied warranty of

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License

    along with this program; if not, write to the Free Software

    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */

#include <string.h>

#include "armdefs.h"

#include "armemu.h"

#include "dbg_rdi.h"

/***************************************************************************\

*                 Definitions for the emulator architecture                 *

\***************************************************************************/

void ARMul_EmulateInit (void);

ARMul_State *ARMul_NewState (void);

void ARMul_Reset (ARMul_State * state);

ARMword ARMul_DoCycle (ARMul_State * state);

unsigned ARMul_DoCoPro (ARMul_State * state);

ARMword ARMul_DoProg (ARMul_State * state);

ARMword ARMul_DoInstr (ARMul_State * state);

void ARMul_Abort (ARMul_State * state, ARMword address);

unsigned ARMul_MultTable[32] =

  { 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9,

  10, 10, 11, 11, 12, 12, 13, 13, 14, 14, 15, 15, 16, 16, 16

};

ARMword ARMul_ImmedTable[4096]; /* immediate DP LHS values */

char ARMul_BitList[256];        /* number of bits in a byte table */

/***************************************************************************\

*         Call this routine once to set up the emulator's tables.           *

\***************************************************************************/

void

ARMul_EmulateInit (void)

{

  unsigned long i, j;

  for (i = 0; i < 4096; i++)

    {                           /* the values of 12 bit dp rhs's */

      ARMul_ImmedTable[i] = ROTATER (i & 0xffL, (i >> 7L) & 0x1eL);

    }

  for (i = 0; i < 256; ARMul_BitList[i++] = 0);   /* how many bits in LSM */

  for (j = 1; j < 256; j <<= 1)

    for (i = 0; i < 256; i++)

      if ((i & j) > 0)

        ARMul_BitList[i]++;

  for (i = 0; i < 256; i++)

    ARMul_BitList[i] *= 4;      /* you always need 4 times these values */

}

/***************************************************************************\

*            Returns a new instantiation of the ARMulator's state           *

\***************************************************************************/

ARMul_State *

ARMul_NewState (void)

{

  ARMul_State *state;

  unsigned i, j;

  state = (ARMul_State *) malloc (sizeof (ARMul_State));

  memset (state, 0, sizeof (ARMul_State));

  state->Emulate = RUN;

  for (i = 0; i < 16; i++)

    {

      state->Reg[i] = 0;

      for (j = 0; j < 7; j++)

        state->RegBank[j][i] = 0;

    }

  for (i = 0; i < 7; i++)

    state->Spsr[i] = 0;

  /* state->Mode = USER26MODE;  */

  state->Mode = USER32MODE;

  state->CallDebug = FALSE;

  state->Debug = FALSE;

  state->VectorCatch = 0;

  state->Aborted = FALSE;

  state->Reseted = FALSE;

  state->Inted = 3;

  state->LastInted = 3;

  state->MemDataPtr = NULL;

  state->MemInPtr = NULL;

  state->MemOutPtr = NULL;

  state->MemSparePtr = NULL;

  state->MemSize = 0;

  state->OSptr = NULL;

  state->CommandLine = NULL;

  state->CP14R0_CCD = -1;

  state->LastTime = 0;

  state->EventSet = 0;

  state->Now = 0;

  state->EventPtr = (struct EventNode **) malloc ((unsigned) EVENTLISTSIZE *

                                                  sizeof (struct EventNode

                                                          *));

  for (i = 0; i < EVENTLISTSIZE; i++)

    *(state->EventPtr + i) = NULL;

  state->prog32Sig = HIGH;

  state->data32Sig = HIGH;

  state->lateabtSig = LOW;

  state->bigendSig = LOW;

  state->is_v4 = LOW;

  state->is_v5 = LOW;

  state->is_v5e = LOW;

  state->is_XScale = LOW;

  state->is_iWMMXt = LOW;

  state->is_v6 = LOW;

  ARMul_Reset (state);

  return state;

}

/***************************************************************************\

  Call this routine to set ARMulator to model certain processor properities

\***************************************************************************/

void

ARMul_SelectProcessor (ARMul_State * state, unsigned properties)

{

  if (properties & ARM_Fix26_Prop)

    {

      state->prog32Sig = LOW;

      state->data32Sig = LOW;

    }

  else

    {

      state->prog32Sig = HIGH;

      state->data32Sig = HIGH;

    }

  state->lateabtSig = LOW;

  state->is_v4 = (properties & (ARM_v4_Prop | ARM_v5_Prop)) ? HIGH : LOW;

  state->is_v5 = (properties & ARM_v5_Prop) ? HIGH : LOW;

  state->is_v5e = (properties & ARM_v5e_Prop) ? HIGH : LOW;

  state->is_XScale = (properties & ARM_XScale_Prop) ? HIGH : LOW;

  state->is_iWMMXt = (properties & ARM_iWMMXt_Prop) ? HIGH : LOW;

  state->is_ep9312 = (properties & ARM_ep9312_Prop) ? HIGH : LOW;

  state->is_v6 = (properties & ARM_v6_Prop) ? HIGH : LOW;

  /* Only initialse the coprocessor support once we

     know what kind of chip we are dealing with.  */

  ARMul_CoProInit (state);

}

/***************************************************************************\

* Call this routine to set up the initial machine state (or perform a RESET *

\***************************************************************************/

void

ARMul_Reset (ARMul_State * state)

{

  state->NextInstr = 0;

  if (state->prog32Sig)

    {

      state->Reg[15] = 0;

      state->Cpsr = INTBITS | SVC32MODE;

      state->Mode = SVC32MODE;

    }

  else

    {

      state->Reg[15] = R15INTBITS | SVC26MODE;

      state->Cpsr = INTBITS | SVC26MODE;

      state->Mode = SVC26MODE;

    }

  ARMul_CPSRAltered (state);

  state->Bank = SVCBANK;

  FLUSHPIPE;

  state->EndCondition = 0;

  state->ErrorCode = 0;

  state->Exception = FALSE;

  state->NresetSig = HIGH;

  state->NfiqSig = HIGH;

  state->NirqSig = HIGH;

  state->NtransSig = (state->Mode & 3) ? HIGH : LOW;

  state->abortSig = LOW;

  state->AbortAddr = 1;

  state->NumInstrs = 0;

  state->NumNcycles = 0;

  state->NumScycles = 0;

  state->NumIcycles = 0;

  state->NumCcycles = 0;

  state->NumFcycles = 0;

#ifdef ASIM

  (void) ARMul_MemoryInit ();

  ARMul_OSInit (state);

#endif

}

/***************************************************************************\

* Emulate the execution of an entire program.  Start the correct emulator   *

* (Emulate26 for a 26 bit ARM and Emulate32 for a 32 bit ARM), return the   *

* address of the last instruction that is executed.                         *

\***************************************************************************/

ARMword

ARMul_DoProg (ARMul_State * state)

{

  ARMword pc = 0;

  state->Emulate = RUN;

  while (state->Emulate != STOP)

    {

      state->Emulate = RUN;

      if (state->prog32Sig && ARMul_MODE32BIT)

        pc = ARMul_Emulate32 (state);

      else

        pc = ARMul_Emulate26 (state);

    }

  return (pc);

}

/***************************************************************************\

* Emulate the execution of one instruction.  Start the correct emulator     *

* (Emulate26 for a 26 bit ARM and Emulate32 for a 32 bit ARM), return the   *

* address of the instruction that is executed.                              *

\***************************************************************************/

ARMword

ARMul_DoInstr (ARMul_State * state)

{

  ARMword pc = 0;

  state->Emulate = ONCE;

  if (state->prog32Sig && ARMul_MODE32BIT)

    pc = ARMul_Emulate32 (state);

  else

    pc = ARMul_Emulate26 (state);

  return (pc);

}

/***************************************************************************\

* This routine causes an Abort to occur, including selecting the correct    *

* mode, register bank, and the saving of registers.  Call with the          *

* appropriate vector's memory address (0,4,8 ....)                          *

\***************************************************************************/

void

ARMul_Abort (ARMul_State * state, ARMword vector)

{

  ARMword temp;

  int isize = INSN_SIZE;

  int esize = (TFLAG ? 0 : 4);

  int e2size = (TFLAG ? -4 : 0);

  state->Aborted = FALSE;

  if (ARMul_OSException (state, vector, ARMul_GetPC (state)))

    return;

  if (state->prog32Sig)

    if (ARMul_MODE26BIT)

      temp = R15PC;

    else

      temp = state->Reg[15];

  else

    temp = R15PC | ECC | ER15INT | EMODE;

  switch (vector)

    {

    case ARMul_ResetV:          /* RESET */

      SETABORT (INTBITS, state->prog32Sig ? SVC32MODE : SVC26MODE, 0);

      break;

    case ARMul_UndefinedInstrV: /* Undefined Instruction */

      SETABORT (IBIT, state->prog32Sig ? UNDEF32MODE : SVC26MODE, isize);

      break;

    case ARMul_SWIV:            /* Software Interrupt */

      SETABORT (IBIT, state->prog32Sig ? SVC32MODE : SVC26MODE, isize);

      break;

    case ARMul_PrefetchAbortV:  /* Prefetch Abort */

      state->AbortAddr = 1;

      SETABORT (IBIT, state->prog32Sig ? ABORT32MODE : SVC26MODE, esize);

      break;

    case ARMul_DataAbortV:      /* Data Abort */

      SETABORT (IBIT, state->prog32Sig ? ABORT32MODE : SVC26MODE, e2size);

      break;

    case ARMul_AddrExceptnV:    /* Address Exception */

      SETABORT (IBIT, SVC26MODE, isize);

      break;

    case ARMul_IRQV:            /* IRQ */

      if (   ! state->is_XScale

          || ! state->CPRead[13] (state, 0, & temp)

          || (temp & ARMul_CP13_R0_IRQ))

        SETABORT (IBIT, state->prog32Sig ? IRQ32MODE : IRQ26MODE, esize);

      break;

    case ARMul_FIQV:            /* FIQ */

      if (   ! state->is_XScale

          || ! state->CPRead[13] (state, 0, & temp)

          || (temp & ARMul_CP13_R0_FIQ))

        SETABORT (INTBITS, state->prog32Sig ? FIQ32MODE : FIQ26MODE, esize);

      break;

    }

  if (ARMul_MODE32BIT)

    ARMul_SetR15 (state, vector);

  else

    ARMul_SetR15 (state, R15CCINTMODE | vector);

  if (ARMul_ReadWord (state, ARMul_GetPC (state)) == 0)

    {

      /* No vector has been installed.  Rather than simulating whatever

         random bits might happen to be at address 0x20 onwards we elect

         to stop.  */

      switch (vector)

        {

        case ARMul_ResetV: state->EndCondition = RDIError_Reset; break;

        case ARMul_UndefinedInstrV: state->EndCondition = RDIError_UndefinedInstruction; break;

        case ARMul_SWIV: state->EndCondition = RDIError_SoftwareInterrupt; break;

        case ARMul_PrefetchAbortV: state->EndCondition = RDIError_PrefetchAbort; break;

        case ARMul_DataAbortV: state->EndCondition = RDIError_DataAbort; break;

        case ARMul_AddrExceptnV: state->EndCondition = RDIError_AddressException; break;

        case ARMul_IRQV: state->EndCondition = RDIError_IRQ; break;

        case ARMul_FIQV: state->EndCondition = RDIError_FIQ; break;

        default: break;

        }

      state->Emulate = FALSE;

    }

}