Subversion Repositories openrisc

dnl Process this file with autoconf to produce a configure script.

AC_PREREQ(2.59)dnl

AC_INIT(Makefile.in)

AC_CONFIG_HEADER(config.h:config.in)

sinclude(../common/aclocal.m4)

# Bugs in autoconf 2.59 break the call to SIM_AC_COMMON, hack around

# it by inlining the macro's contents.

sinclude(../common/common.m4)

dnl Options available in this module

SIM_AC_OPTION_INLINE()

SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)

SIM_AC_OPTION_HOSTENDIAN

SIM_AC_OPTION_WARNINGS

SIM_AC_OPTION_RESERVED_BITS(1)

# DEPRECATED

#

# Instead of defining a `subtarget' macro, code should be checking

# the value of {STATE,CPU}_ARCHITECTURE to identify the architecture

# in question.

#

case "${target}" in

  mips64vr*-*-*)        SIM_SUBTARGET="-DTARGET_ENABLE_FR=1" ;;

  mips*tx39*)           SIM_SUBTARGET="-DSUBTARGET_R3900=1";;

  mips*-sde-elf*)       SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;

  mipsisa32*-*-*)       SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;

  mipsisa64*-*-*)       SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;

  *)                    SIM_SUBTARGET="";;

esac

AC_SUBST(SIM_SUBTARGET)

#

# Select the byte order of the target

#

mips_endian=

default_endian=

case "${target}" in

  mips64el*-*-*)        mips_endian=LITTLE_ENDIAN ;;

  mips64vr*el-*-*)      default_endian=LITTLE_ENDIAN ;;

  mips64*-*-*)          default_endian=BIG_ENDIAN ;;

  mips16*-*-*)          default_endian=BIG_ENDIAN ;;

  mipsisa32*-*-*)       default_endian=BIG_ENDIAN ;;

  mipsisa64*-*-*)       default_endian=BIG_ENDIAN ;;

  mips*-*-*)            default_endian=BIG_ENDIAN ;;

  *)                    default_endian=BIG_ENDIAN ;;

esac

SIM_AC_OPTION_ENDIAN($mips_endian,$default_endian)

#

# Select the bitsize of the target

#

mips_addr_bitsize=

case "${target}" in

  mips*-sde-elf*)       mips_bitsize=64 ; mips_msb=63 ;;

  mips64*-*-*)          mips_bitsize=64 ; mips_msb=63 ;;

  mips16*-*-*)          mips_bitsize=64 ; mips_msb=63 ;;

  mipsisa32*-*-*)       mips_bitsize=32 ; mips_msb=31 ;;

  mipsisa64*-*-*)       mips_bitsize=64 ; mips_msb=63 ;;

  mips*-*-*)            mips_bitsize=32 ; mips_msb=31 ;;

  *)                    mips_bitsize=64 ; mips_msb=63 ;;

esac

SIM_AC_OPTION_BITSIZE($mips_bitsize,$mips_msb,$mips_addr_bitsize)

#

# Select the floating hardware support of the target

#

mips_fpu=HARDWARE_FLOATING_POINT

mips_fpu_bitsize=

case "${target}" in

  mips*tx39*)           mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;

  mips*-sde-elf*)       mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;

  mips64*-*-*)          mips_fpu=HARD_FLOATING_POINT ;;

  mips16*-*-*)          mips_fpu=HARD_FLOATING_POINT ;;

  mipsisa32*-*-*)       mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;

  mipsisa64*-*-*)       mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;

  mips*-*-*)            mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;

  *)                    mips_fpu=HARD_FLOATING_POINT ;;

esac

SIM_AC_OPTION_FLOAT($mips_fpu,$mips_fpu_bitsize)

#

# Select the level of SMP support

#

case "${target}" in

  *)                    mips_smp=0 ;;

esac

SIM_AC_OPTION_SMP($mips_smp)

#

# Select the IGEN architecture

#

sim_gen=IGEN

sim_igen_machine="-M mipsIV"

sim_m16_machine="-M mips16,mipsIII"

sim_igen_filter="32,64,f"

sim_m16_filter="16"

sim_mach_default="mips8000"

case "${target}" in

  mips*tx39*)           sim_gen=IGEN

                        sim_igen_filter="32,f"

                        sim_igen_machine="-M r3900"

                        ;;

  mips64vr43*-*-*)      sim_gen=IGEN

                        sim_igen_machine="-M mipsIV"

                        sim_mach_default="mips8000"

                        ;;

  mips64vr5*-*-*)       sim_gen=IGEN

                        sim_igen_machine="-M vr5000"

                        sim_mach_default="mips5000"

                        ;;

  mips64vr41*)          sim_gen=M16

                        sim_igen_machine="-M vr4100"

                        sim_m16_machine="-M vr4100"

                        sim_igen_filter="32,64,f"

                        sim_m16_filter="16"

                        sim_mach_default="mips4100"

                        ;;

  mips64vr-*-* | mips64vrel-*-*)

                        sim_gen=MULTI

                        sim_multi_configs="\

                          vr4100:mipsIII,mips16,vr4100:32,64:mips4100,mips4111\

                          vr4120:mipsIII,mips16,vr4120:32,64:mips4120\

                          vr5000:mipsIV:32,64,f:mips4300,mips5000\

                          vr5400:mipsIV,vr5400:32,64,f:mips5400\

                          vr5500:mipsIV,vr5500:32,64,f:mips5500"

                        sim_multi_default=mips5000

                        ;;

  mips*-sde-elf*)       sim_gen=M16

                        sim_igen_machine="-M mips64r2,mips3d,mips16,mips16e,mdmx,dsp,dsp2,smartmips"

                        sim_m16_machine="-M mips16,mips16e,mips64r2"

                        sim_igen_filter="32,64,f"

                        sim_mach_default="mipsisa64r2"

                        ;;

  mips64*-*-*)          sim_igen_filter="32,64,f"

                        sim_gen=IGEN

                        ;;

  mips16*-*-*)          sim_gen=M16

                        sim_igen_filter="32,64,f"

                        sim_m16_filter="16"

                        ;;

  mipsisa32r2*-*-*)     sim_gen=M16

                        sim_igen_machine="-M mips32r2,mips16,mips16e,mdmx,dsp,dsp2,smartmips"

                        sim_m16_machine="-M mips16,mips16e,mips32r2"

                        sim_igen_filter="32,f"

                        sim_mach_default="mipsisa32r2"

                        ;;

  mipsisa32*-*-*)       sim_gen=M16

                        sim_igen_machine="-M mips32,mips16,mips16e,smartmips"

                        sim_m16_machine="-M mips16,mips16e,mips32"

                        sim_igen_filter="32,f"

                        sim_mach_default="mipsisa32"

                        ;;

  mipsisa64r2*-*-*)     sim_gen=M16

                        sim_igen_machine="-M mips64r2,mips3d,mips16,mips16e,mdmx,dsp,dsp2"

                        sim_m16_machine="-M mips16,mips16e,mips64r2"

                        sim_igen_filter="32,64,f"

                        sim_mach_default="mipsisa64r2"

                        ;;

  mipsisa64sb1*-*-*)    sim_gen=IGEN

                        sim_igen_machine="-M mips64,mips3d,sb1"

                        sim_igen_filter="32,64,f"

                        sim_mach_default="mips_sb1"

                        ;;

  mipsisa64*-*-*)       sim_gen=M16

                        sim_igen_machine="-M mips64,mips3d,mips16,mips16e,mdmx"

                        sim_m16_machine="-M mips16,mips16e,mips64"

                        sim_igen_filter="32,64,f"

                        sim_mach_default="mipsisa64"

                        ;;

  mips*lsi*)            sim_gen=M16

                        sim_igen_machine="-M mipsIII,mips16"

                        sim_m16_machine="-M mips16,mipsIII"

                        sim_igen_filter="32,f"

                        sim_m16_filter="16"

                        sim_mach_default="mips4000"

                        ;;

  mips*-*-*)            sim_gen=IGEN

                        sim_igen_filter="32,f"

                        ;;

esac

# The MULTI generator can combine several simulation engines into one.

# executable.  A configuration which uses the MULTI should set two

# variables: ${sim_multi_configs} and ${sim_multi_default}.

#

# ${sim_multi_configs} is the list of engines to build.  Each

# space-separated entry has the form NAME:MACHINE:FILTER:BFDMACHS,

# where:

#

# - NAME is a C-compatible prefix for the engine,

# - MACHINE is a -M argument,

# - FILTER is a -F argument, and

# - BFDMACHS is a comma-separated list of bfd machines that the

#     simulator can run.

#

# Each entry will have a separate simulation engine whose prefix is

# m32.  If the machine list includes "mips16", there will also

# be a mips16 engine, prefix m16.  The mips16 engine will be

# generated using the same machine list as the 32-bit version,

# but the filter will be "16" instead of FILTER.

#

# The simulator compares the bfd mach against BFDMACHS to decide

# which engine to use.  Entries in BFDMACHS should be bfd_mach

# values with "bfd_mach_" removed.  ${sim_multi_default} says

# which entry should be the default.

if test ${sim_gen} = MULTI; then

  # Simple sanity check.

  if test -z "${sim_multi_configs}" || test -z "${sim_multi_default}"; then

    AC_MSG_ERROR(Error in configure.in: MULTI simulator not set up correctly)

  fi

  # Start in a known state.

  rm -f multi-include.h multi-run.c

  sim_multi_flags=

  sim_multi_src=

  sim_multi_obj=multi-run.o

  sim_multi_igen_configs=

  sim_seen_default=no

  cat << __EOF__ > multi-run.c

/* Main entry point for MULTI simulators.

   Copyright (C) 2003, 2007, 2010 Free Software Foundation, Inc.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program.  If not, see .

   --

   This file was generated by sim/mips/configure.  */

#include "sim-main.h"

#include "multi-include.h"

#define SD sd

#define CPU cpu

void

sim_engine_run (SIM_DESC sd,

                int next_cpu_nr,

                int nr_cpus,

                int signal) /* ignore */

{

  int mach;

  if (STATE_ARCHITECTURE (sd) == NULL)

    mach = bfd_mach_${sim_multi_default};

  else

    mach = STATE_ARCHITECTURE (SD)->mach;

  switch (mach)

    {

__EOF__

  for fc in ${sim_multi_configs}; do

    # Split up the entry.  ${c} contains the first three elements.

    # Note: outer sqaure brackets are m4 quotes.

    c=`echo ${fc} | sed ['s/:[^:]*$//']`

    bfdmachs=`echo ${fc} | sed 's/.*://'`

    name=`echo ${c} | sed 's/:.*//'`

    machine=`echo ${c} | sed 's/.*:\(.*\):.*/\1/'`

    filter=`echo ${c} | sed 's/.*://'`

    # Build the following lists:

    #

    #   sim_multi_flags: all -M and -F flags used by the simulator

    #   sim_multi_src: all makefile-generated source files

    #   sim_multi_obj: the objects for ${sim_multi_src}

    #   sim_multi_igen_configs: igen configuration strings.

    #

    # Each entry in ${sim_multi_igen_configs} is a prefix (m32

    # or m16) followed by the NAME, MACHINE and FILTER part of

    # the ${sim_multi_configs} entry.

    sim_multi_flags="${sim_multi_flags} -F ${filter} -M ${machine}"

    # Check whether mips16 handling is needed.

    case ${c} in

      *:*mips16*:*)

        # Run igen twice, once for normal mode and once for mips16.

        ws="m32 m16"

        # The top-level function for the mips16 simulator is

        # in a file m16${name}_run.c, generated by the

        # tmp-run-multi Makefile rule.

        sim_multi_src="${sim_multi_src} m16${name}_run.c"

        sim_multi_obj="${sim_multi_obj} m16${name}_run.o"

        sim_multi_flags="${sim_multi_flags} -F 16"

        ;;

      *)

        ws=m32

        ;;

    esac

    # Now add the list of igen-generated files to ${sim_multi_src}

    # and ${sim_multi_obj}.

    for w in ${ws}; do

      for base in engine icache idecode model semantics support; do

        sim_multi_src="${sim_multi_src} ${w}${name}_${base}.c"

        sim_multi_src="${sim_multi_src} ${w}${name}_${base}.h"

        sim_multi_obj="${sim_multi_obj} ${w}${name}_${base}.o"

      done

      sim_multi_igen_configs="${sim_multi_igen_configs} ${w}${c}"

    done

    # Add an include for the engine.h file.  This file declares the

    # top-level foo_engine_run() function.

    echo "#include \"${w}${name}_engine.h\"" >> multi-include.h

    # Add case statements for this engine to sim_engine_run().

    for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do

      echo "    case bfd_mach_${mach}:" >> multi-run.c

      if test ${mach} = ${sim_multi_default}; then

        echo "    default:" >> multi-run.c

        sim_seen_default=yes

      fi

    done

    echo "      ${w}${name}_engine_run (sd, next_cpu_nr, nr_cpus, signal);" \

      >> multi-run.c

    echo "      break;" >> multi-run.c

  done

  # Check whether we added a 'default:' label.

  if test ${sim_seen_default} = no; then

    AC_MSG_ERROR(Error in configure.in: \${sim_multi_configs} doesn't have an entry for \${sim_multi_default})

  fi

  cat << __EOF__ >> multi-run.c

    }

}

int

mips_mach_multi (SIM_DESC sd)

{

  if (STATE_ARCHITECTURE (sd) == NULL)

    return bfd_mach_${sim_multi_default};

  switch (STATE_ARCHITECTURE (SD)->mach)

    {

__EOF__

  # Add case statements for this engine to mips_mach_multi().

  for fc in ${sim_multi_configs}; do

    # Split up the entry.  ${c} contains the first three elements.

    # Note: outer sqaure brackets are m4 quotes.

    c=`echo ${fc} | sed ['s/:[^:]*$//']`

    bfdmachs=`echo ${fc} | sed 's/.*://'`

    for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do

      echo "    case bfd_mach_${mach}:" >> multi-run.c

    done

  done

  cat << __EOF__ >> multi-run.c

      return (STATE_ARCHITECTURE (SD)->mach);

    default:

      return bfd_mach_${sim_multi_default};

    }

}

__EOF__

  SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_MULTI"

else

  # For clean-extra

  sim_multi_src=doesnt-exist.c

  if test x"${sim_mach_default}" = x""; then

    AC_MSG_ERROR(Error in configure.in: \${sim_mach_default} not defined)

  fi

  SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_DEFAULT=bfd_mach_${sim_mach_default}"

fi

sim_igen_flags="-F ${sim_igen_filter} ${sim_igen_machine} ${sim_igen_smp}"

sim_m16_flags=" -F ${sim_m16_filter}  ${sim_m16_machine}  ${sim_igen_smp}"

AC_SUBST(sim_igen_flags)

AC_SUBST(sim_m16_flags)

AC_SUBST(sim_gen)

AC_SUBST(sim_multi_flags)

AC_SUBST(sim_multi_igen_configs)

AC_SUBST(sim_multi_src)

AC_SUBST(sim_multi_obj)

#

# Add simulated hardware devices

#

hw_enabled=no

case "${target}" in

  mips*tx39*)

        hw_enabled=yes

        hw_extra_devices="tx3904cpu tx3904irc tx3904tmr tx3904sio"

        mips_extra_objs="dv-sockser.o"

        SIM_SUBTARGET="$SIM_SUBTARGET -DTARGET_TX3904=1"

        ;;

  *)

        mips_extra_objs=""

        ;;

esac

SIM_AC_OPTION_HARDWARE($hw_enabled,$hw_devices,$hw_extra_devices)

AC_SUBST(mips_extra_objs)

# Choose simulator engine

case "${target}" in

  *)    mips_igen_engine="engine.o"

        ;;

esac

AC_SUBST(mips_igen_engine)

AC_PATH_X

mips_extra_libs=""

AC_SUBST(mips_extra_libs)

AC_CHECK_HEADERS(string.h strings.h stdlib.h stdlib.h)

AC_CHECK_LIB(m, fabs)

AC_CHECK_FUNCS(aint anint sqrt)

SIM_AC_OUTPUT