| 1 |
207 |
jeremybenn |
/* uart.h. UART constant definitions.
|
| 2 |
|
|
|
| 3 |
|
|
Copyright (C) 2004, Jacob Bower
|
| 4 |
|
|
Copyright (C) 2010, Embecosm Limited <info@embecosm.com>
|
| 5 |
|
|
|
| 6 |
|
|
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
|
| 7 |
|
|
|
| 8 |
|
|
This file is part of Newlib.
|
| 9 |
|
|
|
| 10 |
|
|
The original work by Jacob Bower is provided as-is without any kind of
|
| 11 |
|
|
warranty. Use it at your own risk!
|
| 12 |
|
|
|
| 13 |
|
|
All subsequent work is bound by version 3 of the GPL as follows.
|
| 14 |
|
|
|
| 15 |
|
|
This program is free software; you can redistribute it and/or modify it
|
| 16 |
|
|
under the terms of the GNU General Public License as published by the Free
|
| 17 |
|
|
Software Foundation; either version 3 of the License, or (at your option)
|
| 18 |
|
|
any later version.
|
| 19 |
|
|
|
| 20 |
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
| 21 |
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
| 22 |
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
| 23 |
|
|
more details.
|
| 24 |
|
|
|
| 25 |
|
|
You should have received a copy of the GNU General Public License along
|
| 26 |
|
|
with this program. If not, see <http:#www.gnu.org/licenses/>. */
|
| 27 |
|
|
/* -------------------------------------------------------------------------- */
|
| 28 |
|
|
/* This program is commented throughout in a fashion suitable for processing
|
| 29 |
|
|
with Doxygen. */
|
| 30 |
|
|
/* -------------------------------------------------------------------------- */
|
| 31 |
|
|
#ifndef UART__H
|
| 32 |
|
|
#define UART__H
|
| 33 |
|
|
|
| 34 |
|
|
#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
|
| 35 |
|
|
#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
|
| 36 |
|
|
#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
|
| 37 |
|
|
#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */
|
| 38 |
|
|
#define UART_IER 1 /* Out: Interrupt Enable Register */
|
| 39 |
|
|
#define UART_IIR 2 /* In: Interrupt ID Register */
|
| 40 |
|
|
#define UART_FCR 2 /* Out: FIFO Control Register */
|
| 41 |
|
|
#define UART_EFR 2 /* I/O: Extended Features Register */
|
| 42 |
|
|
/* (DLAB=1, 16C660 only) */
|
| 43 |
|
|
#define UART_LCR 3 /* Out: Line Control Register */
|
| 44 |
|
|
#define UART_MCR 4 /* Out: Modem Control Register */
|
| 45 |
|
|
#define UART_LSR 5 /* In: Line Status Register */
|
| 46 |
|
|
#define UART_MSR 6 /* In: Modem Status Register */
|
| 47 |
|
|
#define UART_SCR 7 /* I/O: Scratch Register */
|
| 48 |
|
|
|
| 49 |
|
|
/*
|
| 50 |
|
|
* These are the definitions for the FIFO Control Register
|
| 51 |
|
|
* (16650 only)
|
| 52 |
|
|
*/
|
| 53 |
|
|
#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
|
| 54 |
|
|
#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
|
| 55 |
|
|
#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
|
| 56 |
|
|
#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
|
| 57 |
|
|
#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
|
| 58 |
|
|
#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
|
| 59 |
|
|
#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
|
| 60 |
|
|
#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
|
| 61 |
|
|
#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
|
| 62 |
|
|
/* 16650 redefinitions */
|
| 63 |
|
|
#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
|
| 64 |
|
|
#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
|
| 65 |
|
|
#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
|
| 66 |
|
|
#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
|
| 67 |
|
|
#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
|
| 68 |
|
|
#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
|
| 69 |
|
|
#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
|
| 70 |
|
|
#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
|
| 71 |
|
|
|
| 72 |
|
|
/*
|
| 73 |
|
|
* These are the definitions for the Line Control Register
|
| 74 |
|
|
*
|
| 75 |
|
|
* Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
|
| 76 |
|
|
* UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
|
| 77 |
|
|
*/
|
| 78 |
|
|
#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
|
| 79 |
|
|
#define UART_LCR_SBC 0x40 /* Set break control */
|
| 80 |
|
|
#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
|
| 81 |
|
|
#define UART_LCR_EPAR 0x10 /* Even parity select */
|
| 82 |
|
|
#define UART_LCR_PARITY 0x08 /* Parity Enable */
|
| 83 |
|
|
#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
|
| 84 |
|
|
#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
|
| 85 |
|
|
#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
|
| 86 |
|
|
#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
|
| 87 |
|
|
#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
|
| 88 |
|
|
|
| 89 |
|
|
/*
|
| 90 |
|
|
* These are the definitions for the Line Status Register
|
| 91 |
|
|
*/
|
| 92 |
|
|
#define UART_LSR_TEMT 0x40 /* Transmitter empty */
|
| 93 |
|
|
#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
|
| 94 |
|
|
#define UART_LSR_BI 0x10 /* Break interrupt indicator */
|
| 95 |
|
|
#define UART_LSR_FE 0x08 /* Frame error indicator */
|
| 96 |
|
|
#define UART_LSR_PE 0x04 /* Parity error indicator */
|
| 97 |
|
|
#define UART_LSR_OE 0x02 /* Overrun error indicator */
|
| 98 |
|
|
#define UART_LSR_DR 0x01 /* Receiver data ready */
|
| 99 |
|
|
|
| 100 |
|
|
/*
|
| 101 |
|
|
* These are the definitions for the Interrupt Identification Register
|
| 102 |
|
|
*/
|
| 103 |
|
|
#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
|
| 104 |
|
|
#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
|
| 105 |
|
|
|
| 106 |
|
|
#define UART_IIR_MSI 0x00 /* Modem status interrupt */
|
| 107 |
|
|
#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
|
| 108 |
|
|
#define UART_IIR_TOI 0x0c /* Receive time out interrupt */
|
| 109 |
|
|
#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
|
| 110 |
|
|
#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
|
| 111 |
|
|
|
| 112 |
|
|
/*
|
| 113 |
|
|
* These are the definitions for the Interrupt Enable Register
|
| 114 |
|
|
*/
|
| 115 |
|
|
#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
|
| 116 |
|
|
#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
|
| 117 |
|
|
#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
|
| 118 |
|
|
#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
|
| 119 |
|
|
|
| 120 |
|
|
/*
|
| 121 |
|
|
* These are the definitions for the Modem Control Register
|
| 122 |
|
|
*/
|
| 123 |
|
|
#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
|
| 124 |
|
|
#define UART_MCR_OUT2 0x08 /* Out2 complement */
|
| 125 |
|
|
#define UART_MCR_OUT1 0x04 /* Out1 complement */
|
| 126 |
|
|
#define UART_MCR_RTS 0x02 /* RTS complement */
|
| 127 |
|
|
#define UART_MCR_DTR 0x01 /* DTR complement */
|
| 128 |
|
|
|
| 129 |
|
|
/*
|
| 130 |
|
|
* These are the definitions for the Modem Status Register
|
| 131 |
|
|
*/
|
| 132 |
|
|
#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
|
| 133 |
|
|
#define UART_MSR_RI 0x40 /* Ring Indicator */
|
| 134 |
|
|
#define UART_MSR_DSR 0x20 /* Data Set Ready */
|
| 135 |
|
|
#define UART_MSR_CTS 0x10 /* Clear to Send */
|
| 136 |
|
|
#define UART_MSR_DDCD 0x08 /* Delta DCD */
|
| 137 |
|
|
#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
|
| 138 |
|
|
#define UART_MSR_DDSR 0x02 /* Delta DSR */
|
| 139 |
|
|
#define UART_MSR_DCTS 0x01 /* Delta CTS */
|
| 140 |
|
|
#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
|
| 141 |
|
|
|
| 142 |
|
|
/*
|
| 143 |
|
|
* These are the definitions for the Extended Features Register
|
| 144 |
|
|
* (StarTech 16C660 only, when DLAB=1)
|
| 145 |
|
|
*/
|
| 146 |
|
|
#define UART_EFR_CTS 0x80 /* CTS flow control */
|
| 147 |
|
|
#define UART_EFR_RTS 0x40 /* RTS flow control */
|
| 148 |
|
|
#define UART_EFR_SCD 0x20 /* Special character detect */
|
| 149 |
|
|
#define UART_EFR_ENI 0x10 /* Enhanced Interrupt */
|
| 150 |
|
|
|
| 151 |
|
|
/* The library functions defined here, avoiding namespace polution. */
|
| 152 |
399 |
jeremybenn |
extern void __uart_init ();
|
| 153 |
|
|
extern void __uart_putc (char c);
|
| 154 |
|
|
extern char __uart_getc ();
|
| 155 |
207 |
jeremybenn |
|
| 156 |
|
|
#endif /* UART__H */
|
