Subversion Repositories openrisc

/* --------------------------------------------------------------  */

/* (C)Copyright 2006,2008,                                         */

/* International Business Machines Corporation                     */

/* All Rights Reserved.                                            */

/*                                                                 */

/* Redistribution and use in source and binary forms, with or      */

/* without modification, are permitted provided that the           */

/* following conditions are met:                                   */

/*                                                                 */

/* - Redistributions of source code must retain the above copyright*/

/*   notice, this list of conditions and the following disclaimer. */

/*                                                                 */

/* - Redistributions in binary form must reproduce the above       */

/*   copyright notice, this list of conditions and the following   */

/*   disclaimer in the documentation and/or other materials        */

/*   provided with the distribution.                               */

/*                                                                 */

/* - Neither the name of IBM Corporation nor the names of its      */

/*   contributors may be used to endorse or promote products       */

/*   derived from this software without specific prior written     */

/*   permission.                                                   */

/*                                                                 */

/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND          */

/* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,     */

/* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF        */

/* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE        */

/* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR            */

/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,    */

/* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT    */

/* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;    */

/* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)        */

/* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN       */

/* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR    */

/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,  */

/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.              */

/* --------------------------------------------------------------  */

/* PROLOG END TAG zYx                                              */

#ifdef __SPU__

#ifndef _ASIND2_H_

#define _ASIND2_H_      1

#include "simdmath.h"

#include <spu_intrinsics.h>

#include "sqrtd2.h"

#include "divd2.h"

/*

 * FUNCTION

 *      vector double _asind2(vector double x)

 *

 * DESCRIPTION

 *      Compute the arc sine of the vector of double precision elements

 *      specified by x, returning the resulting angles in radians. The input

 *      elements are to be in the closed interval [-1, 1]. Values outside

 *      this range result in a invalid operation execption being latched in

 *      the FPSCR register and a NAN is returned.

 *

 *      The basic algorithm computes the arc sine using a rational polynomial

 *      of the form x + x^3 * P(x^2) / Q(x^2) for inputs |x| in the interval

 *      [0, 0.5]. Values outsize this range are transformed as by:

 *

 *      asin(x) =  PI/2 - 2*asin(sqrt((1-x)/2)) for x in the range (0.5, 1.0]

 *

 *      asin(x) = -PI/2 + 2*asin(sqrt((1+x)/2)) for x in the range [-1.0, -0.5)

 *

 *      This yields the basic algorithm of:

 *

 *         absx = (x < 0.0) ? -x : x;

 *

 *         if (absx > 0.5) {

 *           if (x < 0) {

 *             addend = -SM_PI_2;

 *             multiplier = -2.0;

 *           } else {

 *             addend = SM_PI_2;

 *             multiplier = 2.0;

 *           }

 *

 *           x = sqrt(-0.5 * absx + 0.5);

 *         } else {

 *           addend = 0.0;

 *           multiplier = 1.0;

 *         }

 *

 *          x2 = x * x;

 *          x3 = x2 * x;

 *

 *          p = ((((P5 * x2 + P4)*x2 + P3)*x2 + P2)*x2 + P1)*x2 + P0;

 *

 *          q = ((((Q5 * x2 + Q4)*x2 + Q3)*x2 + Q2)*x2 + Q1)*x2 + Q0;;

 *

 *          pq = p / q;

 *

 *          result = addend - (x3*pq + x)*multiplier;

 *

 *       Where P5-P0 and Q5-Q0 are the polynomial coeficients.

 */

static __inline vector double _asind2(vector double x)

{

  vec_uint4   x_gt_half, x_eq_half;

  vec_double2 x_abs;                    // absolute value of x

  vec_double2 x_trans;                  // transformed x when |x| > 0.5

  vec_double2 x2, x3;                   // x squared and x cubed, respectively.

  vec_double2 result;

  vec_double2 multiplier, addend;

  vec_double2 p, q, pq;

  vec_double2 half = spu_splats(0.5);

  vec_double2 sign = (vec_double2)spu_splats(0x8000000000000000ULL);

  vec_uchar16 splat_hi = ((vec_uchar16){0,1,2,3, 0,1,2,3, 8,9,10,11, 8,9,10,11});

  // Compute the absolute value of x

  x_abs = spu_andc(x, sign);

  // Perform transformation for the case where |x| > 0.5. We rely on

  // sqrtd2 producing a NAN is |x| > 1.0.

  x_trans = _sqrtd2(spu_nmsub(x_abs, half, half));

  // Determine the correct addend and multiplier.

  x_gt_half = spu_cmpgt((vec_uint4)x_abs, (vec_uint4)half);

  x_eq_half = spu_cmpeq((vec_uint4)x_abs, (vec_uint4)half);

  x_gt_half = spu_or(x_gt_half, spu_and(x_eq_half, spu_rlqwbyte(x_gt_half, 4)));

  x_gt_half = spu_shuffle(x_gt_half, x_gt_half, splat_hi);

  addend = spu_and(spu_sel(spu_splats((double)SM_PI_2), x, (vec_ullong2)sign), (vec_double2)x_gt_half);

  multiplier = spu_sel(spu_splats(-1.0), spu_sel(spu_splats(2.0), x, (vec_ullong2)sign), (vec_ullong2)x_gt_half);

  // Select whether to use the x or the transformed x for the polygon evaluation.

  // if |x| > 0.5 use x_trans

  // else         use x

  x = spu_sel(x, x_trans, (vec_ullong2)x_gt_half);

  // Compute the polynomials.

  x2 = spu_mul(x, x);

  x3 = spu_mul(x2, x);

  p = spu_madd(spu_splats(0.004253011369004428248960), x2, spu_splats(-0.6019598008014123785661));

  p = spu_madd(p, x2, spu_splats(5.444622390564711410273));

  p = spu_madd(p, x2, spu_splats(-16.26247967210700244449));

  p = spu_madd(p, x2, spu_splats(19.56261983317594739197));

  p = spu_madd(p, x2, spu_splats(-8.198089802484824371615));

  q = spu_add(x2, spu_splats(-14.74091372988853791896));

  q = spu_madd(q, x2, spu_splats(70.49610280856842141659));

  q = spu_madd(q, x2, spu_splats(-147.1791292232726029859));

  q = spu_madd(q, x2, spu_splats(139.5105614657485689735));

  q = spu_madd(q, x2, spu_splats(-49.18853881490881290097));

  // Compute the rational solution p/q and final multiplication and addend 

  // correction.

  pq = _divd2(p, q);

  result = spu_nmsub(spu_madd(x3, pq, x), multiplier, addend);

  return (result);

}

#endif /* _ASIND2_H_ */

#endif /* __SPU__ */