URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_alu.v] - Blame information for rev 146

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  OR1200's ALU                                                ////
////                                                              ////
////  This file is part of the OpenRISC 1200 project              ////
////  http://www.opencores.org/cores/or1k/                        ////
////                                                              ////
////  Description                                                 ////
////  ALU                                                         ////
////                                                              ////
////  To Do:                                                      ////
////   - make it smaller and faster                               ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: or1200_alu.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Minor update: 
// Defines added, flags are corrected. 
//
// Revision 1.15  2005/01/07 09:23:39  andreje
// l.ff1 and l.cmov instructions added
//
// Revision 1.14  2004/06/08 18:17:36  lampret
// Non-functional changes. Coding style fixes.
//
// Revision 1.13  2004/05/09 19:49:03  lampret
// Added some l.cust5 custom instructions as example
//
// Revision 1.12  2004/04/05 08:29:57  lampret
// Merged branch_qmem into main tree.
//
// Revision 1.11  2003/04/24 00:16:07  lampret
// No functional changes. Added defines to disable implementation of multiplier/MAC
//
// Revision 1.10  2002/09/08 05:52:16  lampret
// Added optional l.div/l.divu insns. By default they are disabled.
//
// Revision 1.9  2002/09/07 19:16:10  lampret
// If SR[CY] implemented with OR1200_IMPL_ADDC enabled, l.add/l.addi also set SR[CY].
//
// Revision 1.8  2002/09/07 05:42:02  lampret
// Added optional SR[CY]. Added define to enable additional (compare) flag modifiers. Defines are OR1200_IMPL_ADDC and OR1200_ADDITIONAL_FLAG_MODIFIERS.
//
// Revision 1.7  2002/09/03 22:28:21  lampret
// As per Taylor Su suggestion all case blocks are full case by default and optionally (OR1200_CASE_DEFAULT) can be disabled to increase clock frequncy.
//
// Revision 1.6  2002/03/29 16:40:10  lampret
// Added a directive to ignore signed division variables that are only used in simulation.
//
// Revision 1.5  2002/03/29 16:33:59  lampret
// Added again just recently removed full_case directive
//
// Revision 1.4  2002/03/29 15:16:53  lampret
// Some of the warnings fixed.
//
// Revision 1.3  2002/01/28 01:15:59  lampret
// Changed 'void' nop-ops instead of insn[0] to use insn[16]. Debug unit stalls the tick timer. Prepared new flag generation for add and and insns. Blocked DC/IC while they are turned off. Fixed I/D MMU SPRs layout except WAYs. TODO: smart IC invalidate, l.j 2 and TLB ways.
//
// Revision 1.2  2002/01/14 06:18:22  lampret
// Fixed mem2reg bug in FAST implementation. Updated debug unit to work with new genpc/if.
//
// Revision 1.1  2002/01/03 08:16:15  lampret
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.
//
// Revision 1.10  2001/11/12 01:45:40  lampret
// Moved flag bit into SR. Changed RF enable from constant enable to dynamic enable for read ports.
//
// Revision 1.9  2001/10/21 17:57:16  lampret
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.
//
// Revision 1.8  2001/10/19 23:28:45  lampret
// Fixed some synthesis warnings. Configured with caches and MMUs.
//
// Revision 1.7  2001/10/14 13:12:09  lampret
// MP3 version.
//
// Revision 1.1.1.1  2001/10/06 10:18:35  igorm
// no message
//
// Revision 1.2  2001/08/09 13:39:33  lampret
// Major clean-up.
//
// Revision 1.1  2001/07/20 00:46:03  lampret
// Development version of RTL. Libraries are missing.
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_alu(
        a, b, mult_mac_result, macrc_op,
        alu_op, shrot_op, comp_op,
        cust5_op, cust5_limm,
        result, flagforw, flag_we,
        cyforw, cy_we, carry, flag
);
 
parameter width = `OR1200_OPERAND_WIDTH;
 
//
// I/O
//
input   [width-1:0]              a;
input   [width-1:0]              b;
input   [width-1:0]              mult_mac_result;
input                           macrc_op;
input   [`OR1200_ALUOP_WIDTH-1:0]        alu_op;
input   [`OR1200_SHROTOP_WIDTH-1:0]      shrot_op;
input   [`OR1200_COMPOP_WIDTH-1:0]       comp_op;
input   [4:0]                    cust5_op;
input   [5:0]                    cust5_limm;
output  [width-1:0]              result;
output                          flagforw;
output                          flag_we;
output                          cyforw;
output                          cy_we;
input                           carry;
input         flag;
 
//
// Internal wires and regs
//
reg     [width-1:0]              result;
reg     [width-1:0]              shifted_rotated;
reg     [width-1:0]              result_cust5;
reg                             flagforw;
reg                             flagcomp;
reg                             flag_we;
reg                             cy_we;
wire    [width-1:0]              comp_a;
wire    [width-1:0]              comp_b;
`ifdef OR1200_IMPL_ALU_COMP1
wire                            a_eq_b;
wire                            a_lt_b;
`endif
wire    [width-1:0]              result_sum;
`ifdef OR1200_IMPL_ADDC
wire    [width-1:0]              result_csum;
wire                            cy_csum;
`endif
wire    [width-1:0]              result_and;
wire                            cy_sum;
`ifdef OR1200_IMPL_SUB
wire                            cy_sub;
`endif
reg                             cyforw;
 
//
// Combinatorial logic
//
assign comp_a = {a[width-1] ^ comp_op[3] , a[width-2:0]};
assign comp_b = {b[width-1] ^ comp_op[3] , b[width-2:0]};
`ifdef OR1200_IMPL_ALU_COMP1
assign a_eq_b = (comp_a == comp_b);
assign a_lt_b = (comp_a < comp_b);
`endif
`ifdef OR1200_IMPL_SUB
assign cy_sub = a < b;
`endif
assign {cy_sum, result_sum} = a + b;
`ifdef OR1200_IMPL_ADDC
assign {cy_csum, result_csum} = a + b + {`OR1200_OPERAND_WIDTH'd0, carry};
`endif
assign result_and = a & b;
 
//
// Simulation check for bad ALU behavior
//
`ifdef OR1200_WARNINGS
// synopsys translate_off
always @(result) begin
        if (result === 32'bx)
                $display("%t: WARNING: 32'bx detected on ALU result bus. Please check !", $time);
end
// synopsys translate_on
`endif
 
//
// Central part of the ALU
//
always @(alu_op or a or b or result_sum or result_and or macrc_op or shifted_rotated or mult_mac_result or flag or result_cust5 or carry
`ifdef OR1200_IMPL_ADDC
         or result_csum
`endif
) begin
`ifdef OR1200_CASE_DEFAULT
        casex (alu_op)          // synopsys parallel_case
`else
        casex (alu_op)          // synopsys full_case parallel_case
`endif
                `OR1200_ALUOP_FF1: begin
                        result = a[0] ? 1 : a[1] ? 2 : a[2] ? 3 : a[3] ? 4 : a[4] ? 5 : a[5] ? 6 : a[6] ? 7 : a[7] ? 8 : a[8] ? 9 : a[9] ? 10 : a[10] ? 11 : a[11] ? 12 : a[12] ? 13 : a[13] ? 14 : a[14] ? 15 : a[15] ? 16 : a[16] ? 17 : a[17] ? 18 : a[18] ? 19 : a[19] ? 20 : a[20] ? 21 : a[21] ? 22 : a[22] ? 23 : a[23] ? 24 : a[24] ? 25 : a[25] ? 26 : a[26] ? 27 : a[27] ? 28 : a[28] ? 29 : a[29] ? 30 : a[30] ? 31 : a[31] ? 32 : 0;
                end
                `OR1200_ALUOP_CUST5 : begin
                                result = result_cust5;
                end
                `OR1200_ALUOP_SHROT : begin
                                result = shifted_rotated;
                end
                `OR1200_ALUOP_ADD : begin
                                result = result_sum;
                end
`ifdef OR1200_IMPL_ADDC
                `OR1200_ALUOP_ADDC : begin
                                result = result_csum;
                end
`endif
`ifdef OR1200_IMPL_SUB
                `OR1200_ALUOP_SUB : begin
                                result = a - b;
                end
`endif
                `OR1200_ALUOP_XOR : begin
                                result = a ^ b;
                end
                `OR1200_ALUOP_OR  : begin
                                result = a | b;
                end
                `OR1200_ALUOP_IMM : begin
                                result = b;
                end
                `OR1200_ALUOP_MOVHI : begin
                                if (macrc_op) begin
                                        result = mult_mac_result;
                                end
                                else begin
                                        result = b << 16;
                                end
                end
`ifdef OR1200_MULT_IMPLEMENTED
`ifdef OR1200_IMPL_DIV
                `OR1200_ALUOP_DIV,
                `OR1200_ALUOP_DIVU,
`endif
                `OR1200_ALUOP_MUL : begin
                                result = mult_mac_result;
                end
`endif
                `OR1200_ALUOP_CMOV: begin
                        result = flag ? a : b;
                end
 
`ifdef OR1200_CASE_DEFAULT
                default: begin
`else
                `OR1200_ALUOP_COMP, `OR1200_ALUOP_AND: begin
`endif
                        result=result_and;
                end
        endcase
end
 
//
// l.cust5 custom instructions
//
// Examples for move byte, set bit and clear bit
//
always @(cust5_op or cust5_limm or a or b) begin
        casex (cust5_op)                // synopsys parallel_case
                5'h1 : begin
                        casex (cust5_limm[1:0])
                                2'h0: result_cust5 = {a[31:8], b[7:0]};
                                2'h1: result_cust5 = {a[31:16], b[7:0], a[7:0]};
                                2'h2: result_cust5 = {a[31:24], b[7:0], a[15:0]};
                                2'h3: result_cust5 = {b[7:0], a[23:0]};
                        endcase
                end
                5'h2 :
                        result_cust5 = a | (1 << cust5_limm);
                5'h3 :
                        result_cust5 = a & (32'hffffffff ^ (1 << cust5_limm));
//
// *** Put here new l.cust5 custom instructions ***
//
                default: begin
                        result_cust5 = a;
                end
        endcase
end
 
//
// Generate flag and flag write enable
//
always @(alu_op or result_sum or result_and or flagcomp
`ifdef OR1200_IMPL_ADDC
         or result_csum
`endif
) begin
        casex (alu_op)          // synopsys parallel_case
`ifdef OR1200_ADDITIONAL_FLAG_MODIFIERS
                `OR1200_ALUOP_ADD : begin
                        flagforw = (result_sum == 32'h0000_0000);
                        flag_we = 1'b1;
                end
`ifdef OR1200_IMPL_ADDC
                `OR1200_ALUOP_ADDC : begin
                        flagforw = (result_csum == 32'h0000_0000);
                        flag_we = 1'b1;
                end
`endif
                `OR1200_ALUOP_AND: begin
                        flagforw = (result_and == 32'h0000_0000);
                        flag_we = 1'b1;
                end
`endif
                `OR1200_ALUOP_COMP: begin
                        flagforw = flagcomp;
                        flag_we = 1'b1;
                end
                default: begin
                        flagforw = flagcomp;
                        flag_we = 1'b0;
                end
        endcase
end
 
//
// Generate SR[CY] write enable
//
always @(alu_op or cy_sum
`ifdef OR1200_IMPL_CY
`ifdef OR1200_IMPL_ADDC
        or cy_csum
`endif
`ifdef OR1200_IMPL_SUB
        or cy_sub
`endif
`endif
) begin
        casex (alu_op)          // synopsys parallel_case
`ifdef OR1200_IMPL_CY
                `OR1200_ALUOP_ADD : begin
                        cyforw = cy_sum;
                        cy_we = 1'b1;
                end
`ifdef OR1200_IMPL_ADDC
                `OR1200_ALUOP_ADDC: begin
                        cyforw = cy_csum;
                        cy_we = 1'b1;
                end
`endif
`ifdef OR1200_IMPL_SUB
                `OR1200_ALUOP_SUB: begin
                        cyforw = cy_sub;
                        cy_we = 1'b1;
                end
`endif
`endif
                default: begin
                        cyforw = 1'b0;
                        cy_we = 1'b0;
                end
        endcase
end
 
//
// Shifts and rotation
//
always @(shrot_op or a or b) begin
        case (shrot_op)         // synopsys parallel_case
        `OR1200_SHROTOP_SLL :
                                shifted_rotated = (a << b[4:0]);
                `OR1200_SHROTOP_SRL :
                                shifted_rotated = (a >> b[4:0]);
 
`ifdef OR1200_IMPL_ALU_ROTATE
                `OR1200_SHROTOP_ROR :
                                shifted_rotated = (a << (6'd32-{1'b0, b[4:0]})) | (a >> b[4:0]);
`endif
                default:
                                shifted_rotated = ({32{a[31]}} << (6'd32-{1'b0, b[4:0]})) | a >> b[4:0];
        endcase
end
 
//
// First type of compare implementation
//
`ifdef OR1200_IMPL_ALU_COMP1
always @(comp_op or a_eq_b or a_lt_b) begin
        case(comp_op[2:0])       // synopsys parallel_case
                `OR1200_COP_SFEQ:
                        flagcomp = a_eq_b;
                `OR1200_COP_SFNE:
                        flagcomp = ~a_eq_b;
                `OR1200_COP_SFGT:
                        flagcomp = ~(a_eq_b | a_lt_b);
                `OR1200_COP_SFGE:
                        flagcomp = ~a_lt_b;
                `OR1200_COP_SFLT:
                        flagcomp = a_lt_b;
                `OR1200_COP_SFLE:
                        flagcomp = a_eq_b | a_lt_b;
                default:
                        flagcomp = 1'b0;
        endcase
end
`endif
 
//
// Second type of compare implementation
//
`ifdef OR1200_IMPL_ALU_COMP2
always @(comp_op or comp_a or comp_b) begin
        case(comp_op[2:0])       // synopsys parallel_case
                `OR1200_COP_SFEQ:
                        flagcomp = (comp_a == comp_b);
                `OR1200_COP_SFNE:
                        flagcomp = (comp_a != comp_b);
                `OR1200_COP_SFGT:
                        flagcomp = (comp_a > comp_b);
                `OR1200_COP_SFGE:
                        flagcomp = (comp_a >= comp_b);
                `OR1200_COP_SFLT:
                        flagcomp = (comp_a < comp_b);
                `OR1200_COP_SFLE:
                        flagcomp = (comp_a <= comp_b);
                default:
                        flagcomp = 1'b0;
        endcase
end
`endif
 
endmodule

Line No.	Rev	Author	Line
1	10	unneback	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// OR1200's ALU ////`
4			`//// ////`
5			`//// This file is part of the OpenRISC 1200 project ////`
6			`//// http://www.opencores.org/cores/or1k/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// ALU ////`
10			`//// ////`
11			`//// To Do: ////`
12			`//// - make it smaller and faster ////`
13			`//// ////`
14			`//// Author(s): ////`
15			`//// - Damjan Lampret, lampret@opencores.org ////`
16			`//// ////`
17			`//////////////////////////////////////////////////////////////////////`
18			`//// ////`
19			`//// Copyright (C) 2000 Authors and OPENCORES.ORG ////`
20			`//// ////`
21			`//// This source file may be used and distributed without ////`
22			`//// restriction provided that this copyright statement is not ////`
23			`//// removed from the file and that any derivative work contains ////`
24			`//// the original copyright notice and the associated disclaimer. ////`
25			`//// ////`
26			`//// This source file is free software; you can redistribute it ////`
27			`//// and/or modify it under the terms of the GNU Lesser General ////`
28			`//// Public License as published by the Free Software Foundation; ////`
29			`//// either version 2.1 of the License, or (at your option) any ////`
30			`//// later version. ////`
31			`//// ////`
32			`//// This source is distributed in the hope that it will be ////`
33			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
34			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
35			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
36			`//// details. ////`
37			`//// ////`
38			`//// You should have received a copy of the GNU Lesser General ////`
39			`//// Public License along with this source; if not, download it ////`
40			`//// from http://www.opencores.org/lgpl.shtml ////`
41			`//// ////`
42			`//////////////////////////////////////////////////////////////////////`
43			`//`
44			`// CVS Revision History`
45			`//`
46	141	marcus.erl	`// $Log: or1200_alu.v,v $`
47			`// Revision 2.0 2010/06/30 11:00:00 ORSoC`
48			`// Minor update:`
49			`// Defines added, flags are corrected.`
50			`//`
51			`// Revision 1.15 2005/01/07 09:23:39 andreje`
52			`// l.ff1 and l.cmov instructions added`
53			`//`
54	10	unneback	`// Revision 1.14 2004/06/08 18:17:36 lampret`
55			`// Non-functional changes. Coding style fixes.`
56			`//`
57			`// Revision 1.13 2004/05/09 19:49:03 lampret`
58			`// Added some l.cust5 custom instructions as example`
59			`//`
60			`// Revision 1.12 2004/04/05 08:29:57 lampret`
61			`// Merged branch_qmem into main tree.`
62			`//`
63			`// Revision 1.11 2003/04/24 00:16:07 lampret`
64			`// No functional changes. Added defines to disable implementation of multiplier/MAC`
65			`//`
66			`// Revision 1.10 2002/09/08 05:52:16 lampret`
67			`// Added optional l.div/l.divu insns. By default they are disabled.`
68			`//`
69			`// Revision 1.9 2002/09/07 19:16:10 lampret`
70			`// If SR[CY] implemented with OR1200_IMPL_ADDC enabled, l.add/l.addi also set SR[CY].`
71			`//`
72			`// Revision 1.8 2002/09/07 05:42:02 lampret`
73			`// Added optional SR[CY]. Added define to enable additional (compare) flag modifiers. Defines are OR1200_IMPL_ADDC and OR1200_ADDITIONAL_FLAG_MODIFIERS.`
74			`//`
75			`// Revision 1.7 2002/09/03 22:28:21 lampret`
76			`// As per Taylor Su suggestion all case blocks are full case by default and optionally (OR1200_CASE_DEFAULT) can be disabled to increase clock frequncy.`
77			`//`
78			`// Revision 1.6 2002/03/29 16:40:10 lampret`
79			`// Added a directive to ignore signed division variables that are only used in simulation.`
80			`//`
81			`// Revision 1.5 2002/03/29 16:33:59 lampret`
82			`// Added again just recently removed full_case directive`
83			`//`
84			`// Revision 1.4 2002/03/29 15:16:53 lampret`
85			`// Some of the warnings fixed.`
86			`//`
87			`// Revision 1.3 2002/01/28 01:15:59 lampret`
88			`// Changed 'void' nop-ops instead of insn[0] to use insn[16]. Debug unit stalls the tick timer. Prepared new flag generation for add and and insns. Blocked DC/IC while they are turned off. Fixed I/D MMU SPRs layout except WAYs. TODO: smart IC invalidate, l.j 2 and TLB ways.`
89			`//`
90			`// Revision 1.2 2002/01/14 06:18:22 lampret`
91			`// Fixed mem2reg bug in FAST implementation. Updated debug unit to work with new genpc/if.`
92			`//`
93			`// Revision 1.1 2002/01/03 08:16:15 lampret`
94			`// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.`
95			`//`
96			`// Revision 1.10 2001/11/12 01:45:40 lampret`
97			`// Moved flag bit into SR. Changed RF enable from constant enable to dynamic enable for read ports.`
98			`//`
99			`// Revision 1.9 2001/10/21 17:57:16 lampret`
100			`// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.`
101			`//`
102			`// Revision 1.8 2001/10/19 23:28:45 lampret`
103			`// Fixed some synthesis warnings. Configured with caches and MMUs.`
104			`//`
105			`// Revision 1.7 2001/10/14 13:12:09 lampret`
106			`// MP3 version.`
107			`//`
108			`// Revision 1.1.1.1 2001/10/06 10:18:35 igorm`
109			`// no message`
110			`//`
111			`// Revision 1.2 2001/08/09 13:39:33 lampret`
112			`// Major clean-up.`
113			`//`
114			`// Revision 1.1 2001/07/20 00:46:03 lampret`
115			`// Development version of RTL. Libraries are missing.`
116			`//`
117			`//`
118
119			`// synopsys translate_off`
120			`include "timescale.v"
121			`// synopsys translate_on`
122			`include "or1200_defines.v"
123
124			`module or1200_alu(`
125			`a, b, mult_mac_result, macrc_op,`
126			`alu_op, shrot_op, comp_op,`
127			`cust5_op, cust5_limm,`
128			`result, flagforw, flag_we,`
129			`cyforw, cy_we, carry, flag`
130			`);`
131
132			parameter width = `OR1200_OPERAND_WIDTH;
133
134			`//`
135			`// I/O`
136			`//`
137			`input [width-1:0] a;`
138			`input [width-1:0] b;`
139			`input [width-1:0] mult_mac_result;`
140			`input macrc_op;`
141			input [`OR1200_ALUOP_WIDTH-1:0] alu_op;
142			input [`OR1200_SHROTOP_WIDTH-1:0] shrot_op;
143			input [`OR1200_COMPOP_WIDTH-1:0] comp_op;
144			`input [4:0] cust5_op;`
145			`input [5:0] cust5_limm;`
146			`output [width-1:0] result;`
147			`output flagforw;`
148			`output flag_we;`
149			`output cyforw;`
150			`output cy_we;`
151			`input carry;`
152			`input flag;`
153
154			`//`
155			`// Internal wires and regs`
156			`//`
157			`reg [width-1:0] result;`
158			`reg [width-1:0] shifted_rotated;`
159			`reg [width-1:0] result_cust5;`
160			`reg flagforw;`
161			`reg flagcomp;`
162			`reg flag_we;`
163			`reg cy_we;`
164			`wire [width-1:0] comp_a;`
165			`wire [width-1:0] comp_b;`
166			`ifdef OR1200_IMPL_ALU_COMP1
167			`wire a_eq_b;`
168			`wire a_lt_b;`
169			`endif
170			`wire [width-1:0] result_sum;`
171			`ifdef OR1200_IMPL_ADDC
172			`wire [width-1:0] result_csum;`
173			`wire cy_csum;`
174			`endif
175			`wire [width-1:0] result_and;`
176			`wire cy_sum;`
177	141	marcus.erl	`ifdef OR1200_IMPL_SUB
178			`wire cy_sub;`
179			`endif
180	10	unneback	`reg cyforw;`
181
182			`//`
183			`// Combinatorial logic`
184			`//`
185			`assign comp_a = {a[width-1] ^ comp_op[3] , a[width-2:0]};`
186			`assign comp_b = {b[width-1] ^ comp_op[3] , b[width-2:0]};`
187			`ifdef OR1200_IMPL_ALU_COMP1
188			`assign a_eq_b = (comp_a == comp_b);`
189			`assign a_lt_b = (comp_a < comp_b);`
190			`endif
191	141	marcus.erl	`ifdef OR1200_IMPL_SUB
192			`assign cy_sub = a < b;`
193			`endif
194	10	unneback	`assign {cy_sum, result_sum} = a + b;`
195			`ifdef OR1200_IMPL_ADDC
196	141	marcus.erl	assign {cy_csum, result_csum} = a + b + {`OR1200_OPERAND_WIDTH'd0, carry};
197	10	unneback	`endif
198			`assign result_and = a & b;`
199
200			`//`
201			`// Simulation check for bad ALU behavior`
202			`//`
203			`ifdef OR1200_WARNINGS
204			`// synopsys translate_off`
205			`always @(result) begin`
206			`if (result === 32'bx)`
207			`$display("%t: WARNING: 32'bx detected on ALU result bus. Please check !", $time);`
208			`end`
209			`// synopsys translate_on`
210			`endif
211
212			`//`
213			`// Central part of the ALU`
214			`//`
215	141	marcus.erl	`always @(alu_op or a or b or result_sum or result_and or macrc_op or shifted_rotated or mult_mac_result or flag or result_cust5 or carry`
216			`ifdef OR1200_IMPL_ADDC
217			`or result_csum`
218			`endif
219			`) begin`
220	10	unneback	`ifdef OR1200_CASE_DEFAULT
221			`casex (alu_op) // synopsys parallel_case`
222			`else
223			`casex (alu_op) // synopsys full_case parallel_case`
224			`endif
225	141	marcus.erl	`OR1200_ALUOP_FF1: begin
226			`result = a[0] ? 1 : a[1] ? 2 : a[2] ? 3 : a[3] ? 4 : a[4] ? 5 : a[5] ? 6 : a[6] ? 7 : a[7] ? 8 : a[8] ? 9 : a[9] ? 10 : a[10] ? 11 : a[11] ? 12 : a[12] ? 13 : a[13] ? 14 : a[14] ? 15 : a[15] ? 16 : a[16] ? 17 : a[17] ? 18 : a[18] ? 19 : a[19] ? 20 : a[20] ? 21 : a[21] ? 22 : a[22] ? 23 : a[23] ? 24 : a[24] ? 25 : a[25] ? 26 : a[26] ? 27 : a[27] ? 28 : a[28] ? 29 : a[29] ? 30 : a[30] ? 31 : a[31] ? 32 : 0;`
227			`end`
228	10	unneback	`OR1200_ALUOP_CUST5 : begin
229			`result = result_cust5;`
230			`end`
231			`OR1200_ALUOP_SHROT : begin
232			`result = shifted_rotated;`
233			`end`
234			`OR1200_ALUOP_ADD : begin
235			`result = result_sum;`
236			`end`
237			`ifdef OR1200_IMPL_ADDC
238			`OR1200_ALUOP_ADDC : begin
239			`result = result_csum;`
240			`end`
241			`endif
242	141	marcus.erl	`ifdef OR1200_IMPL_SUB
243	10	unneback	`OR1200_ALUOP_SUB : begin
244			`result = a - b;`
245			`end`
246	141	marcus.erl	`endif
247	10	unneback	`OR1200_ALUOP_XOR : begin
248			`result = a ^ b;`
249			`end`
250			`OR1200_ALUOP_OR : begin
251			`result = a \| b;`
252			`end`
253			`OR1200_ALUOP_IMM : begin
254			`result = b;`
255			`end`
256			`OR1200_ALUOP_MOVHI : begin
257			`if (macrc_op) begin`
258			`result = mult_mac_result;`
259			`end`
260			`else begin`
261			`result = b << 16;`
262			`end`
263			`end`
264			`ifdef OR1200_MULT_IMPLEMENTED
265			`ifdef OR1200_IMPL_DIV
266			`OR1200_ALUOP_DIV,
267			`OR1200_ALUOP_DIVU,
268			`endif
269			`OR1200_ALUOP_MUL : begin
270			`result = mult_mac_result;`
271			`end`
272			`endif
273	141	marcus.erl	`OR1200_ALUOP_CMOV: begin
274			`result = flag ? a : b;`
275			`end`
276	10	unneback
277			`ifdef OR1200_CASE_DEFAULT
278	141	marcus.erl	`default: begin`
279	10	unneback	`else
280	141	marcus.erl	`OR1200_ALUOP_COMP, `OR1200_ALUOP_AND: begin
281	10	unneback	`endif
282	141	marcus.erl	`result=result_and;`
283			`end`
284	10	unneback	`endcase`
285			`end`
286
287			`//`
288			`// l.cust5 custom instructions`
289			`//`
290			`// Examples for move byte, set bit and clear bit`
291			`//`
292			`always @(cust5_op or cust5_limm or a or b) begin`
293			`casex (cust5_op) // synopsys parallel_case`
294			`5'h1 : begin`
295			`casex (cust5_limm[1:0])`
296			`2'h0: result_cust5 = {a[31:8], b[7:0]};`
297			`2'h1: result_cust5 = {a[31:16], b[7:0], a[7:0]};`
298			`2'h2: result_cust5 = {a[31:24], b[7:0], a[15:0]};`
299			`2'h3: result_cust5 = {b[7:0], a[23:0]};`
300			`endcase`
301			`end`
302			`5'h2 :`
303			`result_cust5 = a \| (1 << cust5_limm);`
304			`5'h3 :`
305			`result_cust5 = a & (32'hffffffff ^ (1 << cust5_limm));`
306			`//`
307			`// * Put here new l.cust5 custom instructions *`
308			`//`
309			`default: begin`
310			`result_cust5 = a;`
311			`end`
312			`endcase`
313			`end`
314
315			`//`
316			`// Generate flag and flag write enable`
317			`//`
318	141	marcus.erl	`always @(alu_op or result_sum or result_and or flagcomp`
319			`ifdef OR1200_IMPL_ADDC
320			`or result_csum`
321			`endif
322			`) begin`
323	10	unneback	`casex (alu_op) // synopsys parallel_case`
324			`ifdef OR1200_ADDITIONAL_FLAG_MODIFIERS
325			`OR1200_ALUOP_ADD : begin
326			`flagforw = (result_sum == 32'h0000_0000);`
327			`flag_we = 1'b1;`
328			`end`
329			`ifdef OR1200_IMPL_ADDC
330			`OR1200_ALUOP_ADDC : begin
331			`flagforw = (result_csum == 32'h0000_0000);`
332			`flag_we = 1'b1;`
333			`end`
334			`endif
335			`OR1200_ALUOP_AND: begin
336			`flagforw = (result_and == 32'h0000_0000);`
337			`flag_we = 1'b1;`
338			`end`
339			`endif
340			`OR1200_ALUOP_COMP: begin
341			`flagforw = flagcomp;`
342			`flag_we = 1'b1;`
343			`end`
344			`default: begin`
345	141	marcus.erl	`flagforw = flagcomp;`
346	10	unneback	`flag_we = 1'b0;`
347			`end`
348			`endcase`
349			`end`
350
351			`//`
352			`// Generate SR[CY] write enable`
353			`//`
354			`always @(alu_op or cy_sum`
355	141	marcus.erl	`ifdef OR1200_IMPL_CY
356	10	unneback	`ifdef OR1200_IMPL_ADDC
357			`or cy_csum`
358			`endif
359	141	marcus.erl	`ifdef OR1200_IMPL_SUB
360			`or cy_sub`
361			`endif
362			`endif
363			`) begin`
364	10	unneback	`casex (alu_op) // synopsys parallel_case`
365			`ifdef OR1200_IMPL_CY
366			`OR1200_ALUOP_ADD : begin
367			`cyforw = cy_sum;`
368			`cy_we = 1'b1;`
369			`end`
370			`ifdef OR1200_IMPL_ADDC
371			`OR1200_ALUOP_ADDC: begin
372			`cyforw = cy_csum;`
373			`cy_we = 1'b1;`
374			`end`
375			`endif
376	141	marcus.erl	`ifdef OR1200_IMPL_SUB
377			`OR1200_ALUOP_SUB: begin
378			`cyforw = cy_sub;`
379			`cy_we = 1'b1;`
380			`end`
381	10	unneback	`endif
382	141	marcus.erl	`endif
383	10	unneback	`default: begin`
384			`cyforw = 1'b0;`
385			`cy_we = 1'b0;`
386			`end`
387			`endcase`
388			`end`
389
390			`//`
391			`// Shifts and rotation`
392			`//`
393			`always @(shrot_op or a or b) begin`
394			`case (shrot_op) // synopsys parallel_case`
395			`OR1200_SHROTOP_SLL :
396			`shifted_rotated = (a << b[4:0]);`
397			`OR1200_SHROTOP_SRL :
398			`shifted_rotated = (a >> b[4:0]);`
399
400			`ifdef OR1200_IMPL_ALU_ROTATE
401			`OR1200_SHROTOP_ROR :
402			`shifted_rotated = (a << (6'd32-{1'b0, b[4:0]})) \| (a >> b[4:0]);`
403			`endif
404			`default:`
405			`shifted_rotated = ({32{a[31]}} << (6'd32-{1'b0, b[4:0]})) \| a >> b[4:0];`
406			`endcase`
407			`end`
408
409			`//`
410			`// First type of compare implementation`
411			`//`
412			`ifdef OR1200_IMPL_ALU_COMP1
413			`always @(comp_op or a_eq_b or a_lt_b) begin`
414			`case(comp_op[2:0]) // synopsys parallel_case`
415			`OR1200_COP_SFEQ:
416			`flagcomp = a_eq_b;`
417			`OR1200_COP_SFNE:
418			`flagcomp = ~a_eq_b;`
419			`OR1200_COP_SFGT:
420			`flagcomp = ~(a_eq_b \| a_lt_b);`
421			`OR1200_COP_SFGE:
422			`flagcomp = ~a_lt_b;`
423			`OR1200_COP_SFLT:
424			`flagcomp = a_lt_b;`
425			`OR1200_COP_SFLE:
426			`flagcomp = a_eq_b \| a_lt_b;`
427			`default:`
428			`flagcomp = 1'b0;`
429			`endcase`
430			`end`
431			`endif
432
433			`//`
434			`// Second type of compare implementation`
435			`//`
436			`ifdef OR1200_IMPL_ALU_COMP2
437			`always @(comp_op or comp_a or comp_b) begin`
438			`case(comp_op[2:0]) // synopsys parallel_case`
439			`OR1200_COP_SFEQ:
440			`flagcomp = (comp_a == comp_b);`
441			`OR1200_COP_SFNE:
442			`flagcomp = (comp_a != comp_b);`
443			`OR1200_COP_SFGT:
444			`flagcomp = (comp_a > comp_b);`
445			`OR1200_COP_SFGE:
446			`flagcomp = (comp_a >= comp_b);`
447			`OR1200_COP_SFLT:
448			`flagcomp = (comp_a < comp_b);`
449			`OR1200_COP_SFLE:
450			`flagcomp = (comp_a <= comp_b);`
451			`default:`
452			`flagcomp = 1'b0;`
453			`endcase`
454			`end`
455			`endif
456
457			`endmodule`

Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_alu.v] - Blame information for rev 146