URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_spram_1024x32_bw.v] - Blame information for rev 617

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Generic Single-Port Synchronous RAM with byte write signals ////
////                                                              ////
////  This file is part of memory library available from          ////
////  http://www.opencores.org/cvsweb.shtml/generic_memories/     ////
////                                                              ////
////  Description                                                 ////
////  This block is a wrapper with common single-port             ////
////  synchronous memory interface for different                  ////
////  types of ASIC and FPGA RAMs. Beside universal memory        ////
////  interface it also provides behavioral model of generic      ////
////  single-port synchronous RAM.                                ////
////  It should be used in all OPENCORES designs that want to be  ////
////  portable accross different target technologies and          ////
////  independent of target memory.                               ////
////                                                              ////
////  Supported ASIC RAMs are:                                    ////
////  - Artisan Single-Port Sync RAM                              ////
////  - Avant! Two-Port Sync RAM (*)                              ////
////  - Virage Single-Port Sync RAM                               ////
////  - Virtual Silicon Single-Port Sync RAM                      ////
////                                                              ////
////  Supported FPGA RAMs are:                                    ////
////  - Xilinx Virtex RAMB16                                      ////
////  - Xilinx Virtex RAMB4                                       ////
////                                                              ////
////  To Do:                                                      ////
////   - xilinx rams need external tri-state logic                ////
////   - fix avant! two-port ram                                  ////
////   - add additional RAMs                                      ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: or1200_spram_1024x32_bw.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Minor update: 
// Coding style changed.
//
// Revision 1.4  2005/10/19 11:37:56  jcastillo
// Added support for RAMB16 Xilinx4/Spartan3 primitives
//
// Revision 1.3  2004/06/08 18:15:32  lampret
// Changed behavior of the simulation generic models
//
// Revision 1.2  2003/10/17 07:59:44  markom
// mbist signals updated according to newest convention
//
// Revision 1.1  2003/08/27 08:38:36  simons
// Added support for rams with byte write access.
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_spram_1024x32_bw(
`ifdef OR1200_BIST
        // RAM BIST
        mbist_si_i, mbist_so_o, mbist_ctrl_i,
`endif
        // Generic synchronous single-port RAM interface
        clk, rst, ce, we, oe, addr, di, doq
);
 
`ifdef OR1200_BIST
//
// RAM BIST
//
input                   mbist_si_i;
input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;       // bist chain shift control
output                  mbist_so_o;
`endif
 
//
// Generic synchronous single-port RAM interface
//
input                   clk;    // Clock
input                   rst;    // Reset
input                   ce;     // Chip enable input
input   [3:0]           we;     // Write enable input
input                   oe;     // Output enable input
input   [9:0]           addr;   // address bus inputs
input   [31:0]          di;     // input data bus
output  [31:0]          doq;     // output data bus
 
//
// Internal wires and registers
//
 
`ifdef OR1200_ARTISAN_SSP
`else
`ifdef OR1200_VIRTUALSILICON_SSP
`else
`ifdef OR1200_BIST
assign mbist_so_o = mbist_si_i;
`endif
`endif
`endif
 
 
`ifdef OR1200_ARTISAN_SSP
 
//
// Instantiation of ASIC memory:
//
// Artisan Synchronous Single-Port RAM (ra1sh)
//
`ifdef UNUSED
art_hssp_1024x32_bw artisan_ssp(
`else
`ifdef OR1200_BIST
art_hssp_1024x32_bw_bist artisan_ssp(
`else
art_hssp_1024x32_bw artisan_ssp(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i),
        .mbist_so_o(mbist_so_o),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CLK(clk),
        .CEN(~ce),
        .WEN(~we),
        .A(addr),
        .D(di),
        .OEN(~oe),
        .Q(doq)
);
 
`else
 
`ifdef OR1200_AVANT_ATP
 
//
// Instantiation of ASIC memory:
//
// Avant! Asynchronous Two-Port RAM
//
avant_atp avant_atp(
        .web(~we),
        .reb(),
        .oeb(~oe),
        .rcsb(),
        .wcsb(),
        .ra(addr),
        .wa(addr),
        .di(di),
        .doq(doq)
);
 
`else
 
`ifdef OR1200_VIRAGE_SSP
 
//
// Instantiation of ASIC memory:
//
// Virage Synchronous 1-port R/W RAM
//
virage_ssp virage_ssp(
        .clk(clk),
        .adr(addr),
        .d(di),
        .we(we),
        .oe(oe),
        .me(ce),
        .q(doq)
);
 
`else
 
`ifdef OR1200_VIRTUALSILICON_SSP
 
//
// Instantiation of ASIC memory:
//
// Virtual Silicon Single-Port Synchronous SRAM
//
`ifdef OR1200_BIST
wire mbist_si_i_ram_0;
wire mbist_si_i_ram_1;
wire mbist_si_i_ram_2;
wire mbist_si_i_ram_3;
wire mbist_so_o_ram_0;
wire mbist_so_o_ram_1;
wire mbist_so_o_ram_2;
wire mbist_so_o_ram_3;
assign mbist_si_i_ram_0 = mbist_si_i;
assign mbist_si_i_ram_1 = mbist_so_o_ram_0;
assign mbist_si_i_ram_2 = mbist_so_o_ram_1;
assign mbist_si_i_ram_3 = mbist_so_o_ram_2;
assign mbist_so_o = mbist_so_o_ram_3;
`endif
 
`ifdef UNUSED
vs_hdsp_1024x8 vs_ssp_0(
`else
`ifdef OR1200_BIST
vs_hdsp_1024x8_bist vs_ssp_0(
`else
vs_hdsp_1024x8 vs_ssp_0(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i_ram_0),
        .mbist_so_o(mbist_so_o_ram_0),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CK(clk),
        .ADR(addr),
        .DI(di[7:0]),
        .WEN(~we[0]),
        .CEN(~ce),
        .OEN(~oe),
        .DOUT(doq[7:0])
);
 
`ifdef UNUSED
vs_hdsp_1024x8 vs_ssp_1(
`else
`ifdef OR1200_BIST
vs_hdsp_1024x8_bist vs_ssp_1(
`else
vs_hdsp_1024x8 vs_ssp_1(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i_ram_1),
        .mbist_so_o(mbist_so_o_ram_1),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CK(clk),
        .ADR(addr),
        .DI(di[15:8]),
        .WEN(~we[1]),
        .CEN(~ce),
        .OEN(~oe),
        .DOUT(doq[15:8])
);
 
`ifdef UNUSED
vs_hdsp_1024x8 vs_ssp_2(
`else
`ifdef OR1200_BIST
vs_hdsp_1024x8_bist vs_ssp_2(
`else
vs_hdsp_1024x8 vs_ssp_2(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i_ram_2),
        .mbist_so_o(mbist_so_o_ram_2),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CK(clk),
        .ADR(addr),
        .DI(di[23:16]),
        .WEN(~we[2]),
        .CEN(~ce),
        .OEN(~oe),
        .DOUT(doq[23:16])
);
 
`ifdef UNUSED
vs_hdsp_1024x8 vs_ssp_3(
`else
`ifdef OR1200_BIST
vs_hdsp_1024x8_bist vs_ssp_3(
`else
vs_hdsp_1024x8 vs_ssp_3(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i_ram_3),
        .mbist_so_o(mbist_so_o_ram_3),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CK(clk),
        .ADR(addr),
        .DI(di[31:24]),
        .WEN(~we[3]),
        .CEN(~ce),
        .OEN(~oe),
        .DOUT(doq[31:24])
);
 
`else
 
`ifdef OR1200_XILINX_RAMB4
 
//
// Instantiation of FPGA memory:
//
// Virtex/Spartan2
//
 
//
// Block 0
//
RAMB4_S4 ramb4_s4_0(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[3:0]),
        .EN(ce),
        .WE(we[0]),
        .DO(doq[3:0])
);
 
//
// Block 1
//
RAMB4_S4 ramb4_s4_1(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[7:4]),
        .EN(ce),
        .WE(we[0]),
        .DO(doq[7:4])
);
 
//
// Block 2
//
RAMB4_S4 ramb4_s4_2(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[11:8]),
        .EN(ce),
        .WE(we[1]),
        .DO(doq[11:8])
);
 
//
// Block 3
//
RAMB4_S4 ramb4_s4_3(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[15:12]),
        .EN(ce),
        .WE(we[1]),
        .DO(doq[15:12])
);
 
//
// Block 4
//
RAMB4_S4 ramb4_s4_4(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[19:16]),
        .EN(ce),
        .WE(we[2]),
        .DO(doq[19:16])
);
 
//
// Block 5
//
RAMB4_S4 ramb4_s4_5(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[23:20]),
        .EN(ce),
        .WE(we[2]),
        .DO(doq[23:20])
);
 
//
// Block 6
//
RAMB4_S4 ramb4_s4_6(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[27:24]),
        .EN(ce),
        .WE(we[3]),
        .DO(doq[27:24])
);
 
//
// Block 7
//
RAMB4_S4 ramb4_s4_7(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[31:28]),
        .EN(ce),
        .WE(we[3]),
        .DO(doq[31:28])
);
 
`else
 
`ifdef OR1200_XILINX_RAMB16
 
//
// Instantiation of FPGA memory:
//
// Virtex4/Spartan3E
//
// Added By Nir Mor
//
 
//
// Block 0
//
RAMB16_S9 ramb16_s9_0(
        .CLK(clk),
        .SSR(1'b0),
        .ADDR({1'b0,addr}),
        .DI(di[7:0]),
        .DIP(1'b0),
        .EN(ce),
        .WE(we[0]),
        .DO(doq[7:0]),
        .DOP()
);
 
//
// Block 1
//
RAMB16_S9 ramb16_s9_1(
        .CLK(clk),
        .SSR(1'b0),
        .ADDR({1'b0,addr}),
        .DI(di[15:8]),
        .DIP(1'b0),
        .EN(ce),
        .WE(we[1]),
        .DO(doq[15:8]),
        .DOP()
);
 
//
// Block 2
//
RAMB16_S9 ramb16_s9_2(
        .CLK(clk),
        .SSR(1'b0),
        .ADDR({1'b0,addr}),
        .DI(di[23:16]),
        .DIP(1'b0),
        .EN(ce),
        .WE(we[2]),
        .DO(doq[23:16]),
        .DOP()
);
 
//
// Block 3
//
RAMB16_S9 ramb16_s9_3(
        .CLK(clk),
        .SSR(1'b0),
        .ADDR({1'b0,addr}),
        .DI(di[31:24]),
        .DIP(1'b0),
        .EN(ce),
        .WE(we[3]),
        .DO(doq[31:24]),
        .DOP()
);
 
`else
 
//
// Generic single-port synchronous RAM model
//
 
//
// Generic RAM's registers and wires
//
reg     [7:0]        mem_0 [1023:0];              // RAM content
reg     [7:0]        mem_1 [1023:0];              // RAM content
reg     [7:0]        mem_2 [1023:0];              // RAM content
reg     [7:0]        mem_3 [1023:0];              // RAM content
reg     [9:0]        addr_reg;                 // RAM address register
 
//
// Data output drivers
//
assign doq = (oe) ? {mem_3[addr_reg], mem_2[addr_reg], mem_1[addr_reg], mem_0[addr_reg]} : {32{1'b0}};
 
//
// RAM address register
//
always @(posedge clk or `OR1200_RST_EVENT rst)
        if (rst == `OR1200_RST_VALUE)
                addr_reg <=  10'h000;
        else if (ce)
                addr_reg <=  addr;
 
//
// RAM write byte 0
//
always @(posedge clk)
        if (ce && we[0])
                mem_0[addr] <=  di[7:0];
 
//
// RAM write byte 1
//
always @(posedge clk)
        if (ce && we[1])
                mem_1[addr] <=  di[15:8];
 
//
// RAM write byte 2
//
always @(posedge clk)
        if (ce && we[2])
                mem_2[addr] <=  di[23:16];
 
//
// RAM write byte 3
//
always @(posedge clk)
        if (ce && we[3])
                mem_3[addr] <=  di[31:24];
 
 
`endif  // !OR1200_XILINX_RAMB16
`endif  // !OR1200_XILINX_RAMB4
`endif  // !OR1200_VIRTUALSILICON_SSP
`endif  // !OR1200_VIRAGE_SSP
`endif  // !OR1200_AVANT_ATP
`endif  // !OR1200_ARTISAN_SSP
 
endmodule

Line No.	Rev	Author	Line
1	10	unneback	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// Generic Single-Port Synchronous RAM with byte write signals ////`
4			`//// ////`
5			`//// This file is part of memory library available from ////`
6			`//// http://www.opencores.org/cvsweb.shtml/generic_memories/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// This block is a wrapper with common single-port ////`
10			`//// synchronous memory interface for different ////`
11			`//// types of ASIC and FPGA RAMs. Beside universal memory ////`
12			`//// interface it also provides behavioral model of generic ////`
13			`//// single-port synchronous RAM. ////`
14			`//// It should be used in all OPENCORES designs that want to be ////`
15			`//// portable accross different target technologies and ////`
16			`//// independent of target memory. ////`
17			`//// ////`
18			`//// Supported ASIC RAMs are: ////`
19			`//// - Artisan Single-Port Sync RAM ////`
20			`//// - Avant! Two-Port Sync RAM (*) ////`
21			`//// - Virage Single-Port Sync RAM ////`
22			`//// - Virtual Silicon Single-Port Sync RAM ////`
23			`//// ////`
24			`//// Supported FPGA RAMs are: ////`
25			`//// - Xilinx Virtex RAMB16 ////`
26			`//// - Xilinx Virtex RAMB4 ////`
27			`//// ////`
28			`//// To Do: ////`
29			`//// - xilinx rams need external tri-state logic ////`
30			`//// - fix avant! two-port ram ////`
31			`//// - add additional RAMs ////`
32			`//// ////`
33			`//// Author(s): ////`
34			`//// - Damjan Lampret, lampret@opencores.org ////`
35			`//// ////`
36			`//////////////////////////////////////////////////////////////////////`
37			`//// ////`
38			`//// Copyright (C) 2000 Authors and OPENCORES.ORG ////`
39			`//// ////`
40			`//// This source file may be used and distributed without ////`
41			`//// restriction provided that this copyright statement is not ////`
42			`//// removed from the file and that any derivative work contains ////`
43			`//// the original copyright notice and the associated disclaimer. ////`
44			`//// ////`
45			`//// This source file is free software; you can redistribute it ////`
46			`//// and/or modify it under the terms of the GNU Lesser General ////`
47			`//// Public License as published by the Free Software Foundation; ////`
48			`//// either version 2.1 of the License, or (at your option) any ////`
49			`//// later version. ////`
50			`//// ////`
51			`//// This source is distributed in the hope that it will be ////`
52			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
53			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
54			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
55			`//// details. ////`
56			`//// ////`
57			`//// You should have received a copy of the GNU Lesser General ////`
58			`//// Public License along with this source; if not, download it ////`
59			`//// from http://www.opencores.org/lgpl.shtml ////`
60			`//// ////`
61			`//////////////////////////////////////////////////////////////////////`
62			`//`
63			`// CVS Revision History`
64			`//`
65	142	marcus.erl	`// $Log: or1200_spram_1024x32_bw.v,v $`
66			`// Revision 2.0 2010/06/30 11:00:00 ORSoC`
67			`// Minor update:`
68			`// Coding style changed.`
69			`//`
70			`// Revision 1.4 2005/10/19 11:37:56 jcastillo`
71			`// Added support for RAMB16 Xilinx4/Spartan3 primitives`
72			`//`
73	10	unneback	`// Revision 1.3 2004/06/08 18:15:32 lampret`
74			`// Changed behavior of the simulation generic models`
75			`//`
76			`// Revision 1.2 2003/10/17 07:59:44 markom`
77			`// mbist signals updated according to newest convention`
78			`//`
79			`// Revision 1.1 2003/08/27 08:38:36 simons`
80			`// Added support for rams with byte write access.`
81			`//`
82			`//`
83
84			`// synopsys translate_off`
85			`include "timescale.v"
86			`// synopsys translate_on`
87			`include "or1200_defines.v"
88
89			`module or1200_spram_1024x32_bw(`
90			`ifdef OR1200_BIST
91			`// RAM BIST`
92			`mbist_si_i, mbist_so_o, mbist_ctrl_i,`
93			`endif
94			`// Generic synchronous single-port RAM interface`
95			`clk, rst, ce, we, oe, addr, di, doq`
96			`);`
97
98			`ifdef OR1200_BIST
99			`//`
100			`// RAM BIST`
101			`//`
102			`input mbist_si_i;`
103			input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i; // bist chain shift control
104			`output mbist_so_o;`
105			`endif
106
107			`//`
108			`// Generic synchronous single-port RAM interface`
109			`//`
110			`input clk; // Clock`
111			`input rst; // Reset`
112			`input ce; // Chip enable input`
113			`input [3:0] we; // Write enable input`
114			`input oe; // Output enable input`
115			`input [9:0] addr; // address bus inputs`
116			`input [31:0] di; // input data bus`
117			`output [31:0] doq; // output data bus`
118
119			`//`
120			`// Internal wires and registers`
121			`//`
122
123			`ifdef OR1200_ARTISAN_SSP
124			`else
125			`ifdef OR1200_VIRTUALSILICON_SSP
126			`else
127			`ifdef OR1200_BIST
128			`assign mbist_so_o = mbist_si_i;`
129			`endif
130			`endif
131			`endif
132
133
134			`ifdef OR1200_ARTISAN_SSP
135
136			`//`
137			`// Instantiation of ASIC memory:`
138			`//`
139			`// Artisan Synchronous Single-Port RAM (ra1sh)`
140			`//`
141			`ifdef UNUSED
142			`art_hssp_1024x32_bw artisan_ssp(`
143			`else
144			`ifdef OR1200_BIST
145			`art_hssp_1024x32_bw_bist artisan_ssp(`
146			`else
147			`art_hssp_1024x32_bw artisan_ssp(`
148			`endif
149			`endif
150			`ifdef OR1200_BIST
151			`// RAM BIST`
152			`.mbist_si_i(mbist_si_i),`
153			`.mbist_so_o(mbist_so_o),`
154			`.mbist_ctrl_i(mbist_ctrl_i),`
155			`endif
156			`.CLK(clk),`
157			`.CEN(~ce),`
158			`.WEN(~we),`
159			`.A(addr),`
160			`.D(di),`
161			`.OEN(~oe),`
162			`.Q(doq)`
163			`);`
164
165			`else
166
167			`ifdef OR1200_AVANT_ATP
168
169			`//`
170			`// Instantiation of ASIC memory:`
171			`//`
172			`// Avant! Asynchronous Two-Port RAM`
173			`//`
174			`avant_atp avant_atp(`
175			`.web(~we),`
176			`.reb(),`
177			`.oeb(~oe),`
178			`.rcsb(),`
179			`.wcsb(),`
180			`.ra(addr),`
181			`.wa(addr),`
182			`.di(di),`
183			`.doq(doq)`
184			`);`
185
186			`else
187
188			`ifdef OR1200_VIRAGE_SSP
189
190			`//`
191			`// Instantiation of ASIC memory:`
192			`//`
193			`// Virage Synchronous 1-port R/W RAM`
194			`//`
195			`virage_ssp virage_ssp(`
196			`.clk(clk),`
197			`.adr(addr),`
198			`.d(di),`
199			`.we(we),`
200			`.oe(oe),`
201			`.me(ce),`
202			`.q(doq)`
203			`);`
204
205			`else
206
207			`ifdef OR1200_VIRTUALSILICON_SSP
208
209			`//`
210			`// Instantiation of ASIC memory:`
211			`//`
212			`// Virtual Silicon Single-Port Synchronous SRAM`
213			`//`
214			`ifdef OR1200_BIST
215			`wire mbist_si_i_ram_0;`
216			`wire mbist_si_i_ram_1;`
217			`wire mbist_si_i_ram_2;`
218			`wire mbist_si_i_ram_3;`
219			`wire mbist_so_o_ram_0;`
220			`wire mbist_so_o_ram_1;`
221			`wire mbist_so_o_ram_2;`
222			`wire mbist_so_o_ram_3;`
223			`assign mbist_si_i_ram_0 = mbist_si_i;`
224			`assign mbist_si_i_ram_1 = mbist_so_o_ram_0;`
225			`assign mbist_si_i_ram_2 = mbist_so_o_ram_1;`
226			`assign mbist_si_i_ram_3 = mbist_so_o_ram_2;`
227			`assign mbist_so_o = mbist_so_o_ram_3;`
228			`endif
229
230			`ifdef UNUSED
231			`vs_hdsp_1024x8 vs_ssp_0(`
232			`else
233			`ifdef OR1200_BIST
234			`vs_hdsp_1024x8_bist vs_ssp_0(`
235			`else
236			`vs_hdsp_1024x8 vs_ssp_0(`
237			`endif
238			`endif
239			`ifdef OR1200_BIST
240			`// RAM BIST`
241			`.mbist_si_i(mbist_si_i_ram_0),`
242			`.mbist_so_o(mbist_so_o_ram_0),`
243			`.mbist_ctrl_i(mbist_ctrl_i),`
244			`endif
245			`.CK(clk),`
246			`.ADR(addr),`
247			`.DI(di[7:0]),`
248			`.WEN(~we[0]),`
249			`.CEN(~ce),`
250			`.OEN(~oe),`
251			`.DOUT(doq[7:0])`
252			`);`
253
254			`ifdef UNUSED
255			`vs_hdsp_1024x8 vs_ssp_1(`
256			`else
257			`ifdef OR1200_BIST
258			`vs_hdsp_1024x8_bist vs_ssp_1(`
259			`else
260			`vs_hdsp_1024x8 vs_ssp_1(`
261			`endif
262			`endif
263			`ifdef OR1200_BIST
264			`// RAM BIST`
265			`.mbist_si_i(mbist_si_i_ram_1),`
266			`.mbist_so_o(mbist_so_o_ram_1),`
267			`.mbist_ctrl_i(mbist_ctrl_i),`
268			`endif
269			`.CK(clk),`
270			`.ADR(addr),`
271			`.DI(di[15:8]),`
272			`.WEN(~we[1]),`
273			`.CEN(~ce),`
274			`.OEN(~oe),`
275			`.DOUT(doq[15:8])`
276			`);`
277
278			`ifdef UNUSED
279			`vs_hdsp_1024x8 vs_ssp_2(`
280			`else
281			`ifdef OR1200_BIST
282			`vs_hdsp_1024x8_bist vs_ssp_2(`
283			`else
284			`vs_hdsp_1024x8 vs_ssp_2(`
285			`endif
286			`endif
287			`ifdef OR1200_BIST
288			`// RAM BIST`
289			`.mbist_si_i(mbist_si_i_ram_2),`
290			`.mbist_so_o(mbist_so_o_ram_2),`
291			`.mbist_ctrl_i(mbist_ctrl_i),`
292			`endif
293			`.CK(clk),`
294			`.ADR(addr),`
295			`.DI(di[23:16]),`
296			`.WEN(~we[2]),`
297			`.CEN(~ce),`
298			`.OEN(~oe),`
299			`.DOUT(doq[23:16])`
300			`);`
301
302			`ifdef UNUSED
303			`vs_hdsp_1024x8 vs_ssp_3(`
304			`else
305			`ifdef OR1200_BIST
306			`vs_hdsp_1024x8_bist vs_ssp_3(`
307			`else
308			`vs_hdsp_1024x8 vs_ssp_3(`
309			`endif
310			`endif
311			`ifdef OR1200_BIST
312			`// RAM BIST`
313			`.mbist_si_i(mbist_si_i_ram_3),`
314			`.mbist_so_o(mbist_so_o_ram_3),`
315			`.mbist_ctrl_i(mbist_ctrl_i),`
316			`endif
317			`.CK(clk),`
318			`.ADR(addr),`
319			`.DI(di[31:24]),`
320			`.WEN(~we[3]),`
321			`.CEN(~ce),`
322			`.OEN(~oe),`
323			`.DOUT(doq[31:24])`
324			`);`
325
326			`else
327
328			`ifdef OR1200_XILINX_RAMB4
329
330			`//`
331			`// Instantiation of FPGA memory:`
332			`//`
333			`// Virtex/Spartan2`
334			`//`
335
336			`//`
337			`// Block 0`
338			`//`
339			`RAMB4_S4 ramb4_s4_0(`
340			`.CLK(clk),`
341	142	marcus.erl	`.RST(1'b0),`
342	10	unneback	`.ADDR(addr),`
343			`.DI(di[3:0]),`
344			`.EN(ce),`
345			`.WE(we[0]),`
346			`.DO(doq[3:0])`
347			`);`
348
349			`//`
350			`// Block 1`
351			`//`
352			`RAMB4_S4 ramb4_s4_1(`
353			`.CLK(clk),`
354	142	marcus.erl	`.RST(1'b0),`
355	10	unneback	`.ADDR(addr),`
356			`.DI(di[7:4]),`
357			`.EN(ce),`
358			`.WE(we[0]),`
359			`.DO(doq[7:4])`
360			`);`
361
362			`//`
363			`// Block 2`
364			`//`
365			`RAMB4_S4 ramb4_s4_2(`
366			`.CLK(clk),`
367	142	marcus.erl	`.RST(1'b0),`
368	10	unneback	`.ADDR(addr),`
369			`.DI(di[11:8]),`
370			`.EN(ce),`
371			`.WE(we[1]),`
372			`.DO(doq[11:8])`
373			`);`
374
375			`//`
376			`// Block 3`
377			`//`
378			`RAMB4_S4 ramb4_s4_3(`
379			`.CLK(clk),`
380	142	marcus.erl	`.RST(1'b0),`
381	10	unneback	`.ADDR(addr),`
382			`.DI(di[15:12]),`
383			`.EN(ce),`
384			`.WE(we[1]),`
385			`.DO(doq[15:12])`
386			`);`
387
388			`//`
389			`// Block 4`
390			`//`
391			`RAMB4_S4 ramb4_s4_4(`
392			`.CLK(clk),`
393	142	marcus.erl	`.RST(1'b0),`
394	10	unneback	`.ADDR(addr),`
395			`.DI(di[19:16]),`
396			`.EN(ce),`
397			`.WE(we[2]),`
398			`.DO(doq[19:16])`
399			`);`
400
401			`//`
402			`// Block 5`
403			`//`
404			`RAMB4_S4 ramb4_s4_5(`
405			`.CLK(clk),`
406	142	marcus.erl	`.RST(1'b0),`
407	10	unneback	`.ADDR(addr),`
408			`.DI(di[23:20]),`
409			`.EN(ce),`
410			`.WE(we[2]),`
411			`.DO(doq[23:20])`
412			`);`
413
414			`//`
415			`// Block 6`
416			`//`
417			`RAMB4_S4 ramb4_s4_6(`
418			`.CLK(clk),`
419	142	marcus.erl	`.RST(1'b0),`
420	10	unneback	`.ADDR(addr),`
421			`.DI(di[27:24]),`
422			`.EN(ce),`
423			`.WE(we[3]),`
424			`.DO(doq[27:24])`
425			`);`
426
427			`//`
428			`// Block 7`
429			`//`
430			`RAMB4_S4 ramb4_s4_7(`
431			`.CLK(clk),`
432	142	marcus.erl	`.RST(1'b0),`
433	10	unneback	`.ADDR(addr),`
434			`.DI(di[31:28]),`
435			`.EN(ce),`
436			`.WE(we[3]),`
437			`.DO(doq[31:28])`
438			`);`
439
440			`else
441
442			`ifdef OR1200_XILINX_RAMB16
443
444			`//`
445			`// Instantiation of FPGA memory:`
446			`//`
447			`// Virtex4/Spartan3E`
448			`//`
449			`// Added By Nir Mor`
450			`//`
451
452			`//`
453			`// Block 0`
454			`//`
455			`RAMB16_S9 ramb16_s9_0(`
456			`.CLK(clk),`
457	142	marcus.erl	`.SSR(1'b0),`
458	10	unneback	`.ADDR({1'b0,addr}),`
459			`.DI(di[7:0]),`
460			`.DIP(1'b0),`
461			`.EN(ce),`
462			`.WE(we[0]),`
463			`.DO(doq[7:0]),`
464			`.DOP()`
465			`);`
466
467			`//`
468			`// Block 1`
469			`//`
470			`RAMB16_S9 ramb16_s9_1(`
471			`.CLK(clk),`
472	142	marcus.erl	`.SSR(1'b0),`
473	10	unneback	`.ADDR({1'b0,addr}),`
474			`.DI(di[15:8]),`
475			`.DIP(1'b0),`
476			`.EN(ce),`
477			`.WE(we[1]),`
478			`.DO(doq[15:8]),`
479			`.DOP()`
480			`);`
481
482			`//`
483			`// Block 2`
484			`//`
485			`RAMB16_S9 ramb16_s9_2(`
486			`.CLK(clk),`
487	142	marcus.erl	`.SSR(1'b0),`
488	10	unneback	`.ADDR({1'b0,addr}),`
489			`.DI(di[23:16]),`
490			`.DIP(1'b0),`
491			`.EN(ce),`
492			`.WE(we[2]),`
493			`.DO(doq[23:16]),`
494			`.DOP()`
495			`);`
496
497			`//`
498			`// Block 3`
499			`//`
500			`RAMB16_S9 ramb16_s9_3(`

Browse

Tools

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_spram_1024x32_bw.v] - Blame information for rev 617