URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_spram_1024x8.v] - Blame information for rev 146

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Generic Single-Port Synchronous RAM                         ////
////                                                              ////
////  This file is part of memory library available from          ////
////  http://www.opencores.org/cvsweb.shtml/generic_memories/     ////
////                                                              ////
////  Description                                                 ////
////  This block is a wrapper with common single-port             ////
////  synchronous memory interface for different                  ////
////  types of ASIC and FPGA RAMs. Beside universal memory        ////
////  interface it also provides behavioral model of generic      ////
////  single-port synchronous RAM.                                ////
////  It should be used in all OPENCORES designs that want to be  ////
////  portable accross different target technologies and          ////
////  independent of target memory.                               ////
////                                                              ////
////  Supported ASIC RAMs are:                                    ////
////  - Artisan Single-Port Sync RAM                              ////
////  - Avant! Two-Port Sync RAM (*)                              ////
////  - Virage Single-Port Sync RAM                               ////
////  - Virtual Silicon Single-Port Sync RAM                      ////
////                                                              ////
////  Supported FPGA RAMs are:                                    ////
////  - Xilinx Virtex RAMB16                                      ////
////  - Xilinx Virtex RAMB4                                       ////
////  - Altera LPM                                                ////
////                                                              ////
////  To Do:                                                      ////
////   - xilinx rams need external tri-state logic                ////
////   - fix avant! two-port ram                                  ////
////   - add additional RAMs                                      ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: or1200_spram_1024x8.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Minor update: 
// Coding style changed.
//
// Revision 1.9  2005/10/19 11:37:56  jcastillo
// Added support for RAMB16 Xilinx4/Spartan3 primitives
//
// Revision 1.8  2004/06/08 18:15:32  lampret
// Changed behavior of the simulation generic models
//
// Revision 1.7  2004/04/05 08:29:57  lampret
// Merged branch_qmem into main tree.
//
// Revision 1.3.4.1  2003/12/09 11:46:48  simons
// Mbist nameing changed, Artisan ram instance signal names fixed, some synthesis waning fixed.
//
// Revision 1.3  2003/04/07 01:19:07  lampret
// Added Altera LPM RAMs. Changed generic RAM output when OE inactive.
//
// Revision 1.2  2002/10/17 20:04:40  lampret
// Added BIST scan. Special VS RAMs need to be used to implement BIST.
//
// Revision 1.1  2002/01/03 08:16:15  lampret
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.
//
// Revision 1.8  2001/11/02 18:57:14  lampret
// Modified virtual silicon instantiations.
//
// Revision 1.7  2001/10/21 17:57:16  lampret
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.
//
// Revision 1.6  2001/10/14 13:12:09  lampret
// MP3 version.
//
// Revision 1.1.1.1  2001/10/06 10:18:36  igorm
// no message
//
// Revision 1.1  2001/08/09 13:39:33  lampret
// Major clean-up.
//
// Revision 1.2  2001/07/30 05:38:02  lampret
// Adding empty directories required by HDL coding guidelines
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_spram_1024x8(
`ifdef OR1200_BIST
        // RAM BIST
        mbist_si_i, mbist_so_o, mbist_ctrl_i,
`endif
        // Generic synchronous single-port RAM interface
        clk, rst, ce, we, oe, addr, di, doq
);
 
//
// Default address and data buses width
//
parameter aw = 10;
parameter dw = 8;
 
`ifdef OR1200_BIST
//
// RAM BIST
//
input mbist_si_i;
input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;
output mbist_so_o;
`endif
 
//
// Generic synchronous single-port RAM interface
//
input                   clk;    // Clock
input                   rst;    // Reset
input                   ce;     // Chip enable input
input                   we;     // Write enable input
input                   oe;     // Output enable input
input   [aw-1:0] addr;   // address bus inputs
input   [dw-1:0] di;     // input data bus
output  [dw-1:0] doq;    // output data bus
 
//
// Internal wires and registers
//
 
`ifdef OR1200_ARTISAN_SSP
`else
`ifdef OR1200_VIRTUALSILICON_SSP
`else
`ifdef OR1200_BIST
assign mbist_so_o = mbist_si_i;
`endif
`endif
`endif
 
`ifdef OR1200_ARTISAN_SSP
 
//
// Instantiation of ASIC memory:
//
// Artisan Synchronous Single-Port RAM (ra1sh)
//
`ifdef UNUSED
art_hssp_1024x8 #(dw, 1<<aw, aw) artisan_ssp(
`else
`ifdef OR1200_BIST
art_hssp_1024x8_bist artisan_ssp(
`else
art_hssp_1024x8 artisan_ssp(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i),
        .mbist_so_o(mbist_so_o),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CLK(clk),
        .CEN(~ce),
        .WEN(~we),
        .A(addr),
        .D(di),
        .OEN(~oe),
        .Q(doq)
);
 
`else
 
`ifdef OR1200_AVANT_ATP
 
//
// Instantiation of ASIC memory:
//
// Avant! Asynchronous Two-Port RAM
//
avant_atp avant_atp(
        .web(~we),
        .reb(),
        .oeb(~oe),
        .rcsb(),
        .wcsb(),
        .ra(addr),
        .wa(addr),
        .di(di),
        .doq(doq)
);
 
`else
 
`ifdef OR1200_VIRAGE_SSP
 
//
// Instantiation of ASIC memory:
//
// Virage Synchronous 1-port R/W RAM
//
virage_ssp virage_ssp(
        .clk(clk),
        .adr(addr),
        .d(di),
        .we(we),
        .oe(oe),
        .me(ce),
        .q(doq)
);
 
`else
 
`ifdef OR1200_VIRTUALSILICON_SSP
 
//
// Instantiation of ASIC memory:
//
// Virtual Silicon Single-Port Synchronous SRAM
//
`ifdef UNUSED
vs_hdsp_1024x8 #(1<<aw, aw-1, dw-1) vs_ssp(
`else
`ifdef OR1200_BIST
vs_hdsp_1024x8_bist vs_ssp(
`else
vs_hdsp_1024x8 vs_ssp(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i),
        .mbist_so_o(mbist_so_o),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CK(clk),
        .ADR(addr),
        .DI(di),
        .WEN(~we),
        .CEN(~ce),
        .OEN(~oe),
        .DOUT(doq)
);
 
`else
 
`ifdef OR1200_XILINX_RAMB4
 
//
// Instantiation of FPGA memory:
//
// Virtex/Spartan2
//
 
//
// Block 0
//
RAMB4_S4 ramb4_s4_0(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[3:0]),
        .EN(ce),
        .WE(we),
        .DO(doq[3:0])
);
 
//
// Block 1
//
RAMB4_S4 ramb4_s4_1(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[7:4]),
        .EN(ce),
        .WE(we),
        .DO(doq[7:4])
);
 
`else
 
`ifdef OR1200_XILINX_RAMB16
 
//
// Instantiation of FPGA memory:
//
// Virtex4/Spartan3E
//
// Added By Nir Mor
//
 
RAMB16_S9 ramb16_s9(
        .CLK(clk),
        .SSR(1'b0),
        .ADDR({1'b0,addr}),
        .DI(di),
        .DIP(1'b0),
        .EN(ce),
        .WE(we),
        .DO(doq),
        .DOP()
);
 
`else
 
`ifdef OR1200_ALTERA_LPM
 
//
// Instantiation of FPGA memory:
//
// Altera LPM
//
// Added By Jamil Khatib
//
 
wire    wr;
 
assign  wr = ce & we;
 
initial $display("Using Altera LPM.");
 
lpm_ram_dq lpm_ram_dq_component (
        .address(addr),
        .inclock(clk),
        .outclock(clk),
        .data(di),
        .we(wr),
        .q(doq)
);
 
defparam lpm_ram_dq_component.lpm_width = dw,
        lpm_ram_dq_component.lpm_widthad = aw,
        lpm_ram_dq_component.lpm_indata = "REGISTERED",
        lpm_ram_dq_component.lpm_address_control = "REGISTERED",
        lpm_ram_dq_component.lpm_outdata = "UNREGISTERED",
        lpm_ram_dq_component.lpm_hint = "USE_EAB=ON";
        // examplar attribute lpm_ram_dq_component NOOPT TRUE
 
`else
 
//
// Generic single-port synchronous RAM model
//
 
//
// Generic RAM's registers and wires
//
reg     [dw-1:0] mem [(1<<aw)-1:0];       // RAM content
reg     [aw-1:0] addr_reg;               // RAM address register
 
//
// Data output drivers
//
assign doq = (oe) ? mem[addr_reg] : {dw{1'b0}};
 
//
// RAM address register
//
always @(posedge clk or posedge rst)
        if (rst)
                addr_reg <= #1 {aw{1'b0}};
        else if (ce)
                addr_reg <= #1 addr;
 
//
// RAM write
//
always @(posedge clk)
        if (ce && we)
                mem[addr] <= #1 di;
 
`endif  // !OR1200_ALTERA_LPM
`endif  // !OR1200_XILINX_RAMB16
`endif  // !OR1200_XILINX_RAMB4
`endif  // !OR1200_VIRTUALSILICON_SSP
`endif  // !OR1200_VIRAGE_SSP
`endif  // !OR1200_AVANT_ATP
`endif  // !OR1200_ARTISAN_SSP
 
endmodule

Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_spram_1024x8.v] - Blame information for rev 146

Line No.	Rev	Author	Line
1	10	unneback	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// Generic Single-Port Synchronous RAM ////`
4			`//// ////`
5			`//// This file is part of memory library available from ////`
6			`//// http://www.opencores.org/cvsweb.shtml/generic_memories/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// This block is a wrapper with common single-port ////`
10			`//// synchronous memory interface for different ////`
11			`//// types of ASIC and FPGA RAMs. Beside universal memory ////`
12			`//// interface it also provides behavioral model of generic ////`
13			`//// single-port synchronous RAM. ////`
14			`//// It should be used in all OPENCORES designs that want to be ////`
15			`//// portable accross different target technologies and ////`
16			`//// independent of target memory. ////`
17			`//// ////`
18			`//// Supported ASIC RAMs are: ////`
19			`//// - Artisan Single-Port Sync RAM ////`
20			`//// - Avant! Two-Port Sync RAM (*) ////`
21			`//// - Virage Single-Port Sync RAM ////`
22			`//// - Virtual Silicon Single-Port Sync RAM ////`
23			`//// ////`
24			`//// Supported FPGA RAMs are: ////`
25			`//// - Xilinx Virtex RAMB16 ////`
26			`//// - Xilinx Virtex RAMB4 ////`
27			`//// - Altera LPM ////`
28			`//// ////`
29			`//// To Do: ////`
30			`//// - xilinx rams need external tri-state logic ////`
31			`//// - fix avant! two-port ram ////`
32			`//// - add additional RAMs ////`
33			`//// ////`
34			`//// Author(s): ////`
35			`//// - Damjan Lampret, lampret@opencores.org ////`
36			`//// ////`
37			`//////////////////////////////////////////////////////////////////////`
38			`//// ////`
39			`//// Copyright (C) 2000 Authors and OPENCORES.ORG ////`
40			`//// ////`
41			`//// This source file may be used and distributed without ////`
42			`//// restriction provided that this copyright statement is not ////`
43			`//// removed from the file and that any derivative work contains ////`
44			`//// the original copyright notice and the associated disclaimer. ////`
45			`//// ////`
46			`//// This source file is free software; you can redistribute it ////`
47			`//// and/or modify it under the terms of the GNU Lesser General ////`
48			`//// Public License as published by the Free Software Foundation; ////`
49			`//// either version 2.1 of the License, or (at your option) any ////`
50			`//// later version. ////`
51			`//// ////`
52			`//// This source is distributed in the hope that it will be ////`
53			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
54			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
55			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
56			`//// details. ////`
57			`//// ////`
58			`//// You should have received a copy of the GNU Lesser General ////`
59			`//// Public License along with this source; if not, download it ////`
60			`//// from http://www.opencores.org/lgpl.shtml ////`
61			`//// ////`
62			`//////////////////////////////////////////////////////////////////////`
63			`//`
64			`// CVS Revision History`
65			`//`
66	142	marcus.erl	`// $Log: or1200_spram_1024x8.v,v $`
67			`// Revision 2.0 2010/06/30 11:00:00 ORSoC`
68			`// Minor update:`
69			`// Coding style changed.`
70			`//`
71			`// Revision 1.9 2005/10/19 11:37:56 jcastillo`
72			`// Added support for RAMB16 Xilinx4/Spartan3 primitives`
73			`//`
74	10	unneback	`// Revision 1.8 2004/06/08 18:15:32 lampret`
75			`// Changed behavior of the simulation generic models`
76			`//`
77			`// Revision 1.7 2004/04/05 08:29:57 lampret`
78			`// Merged branch_qmem into main tree.`
79			`//`
80			`// Revision 1.3.4.1 2003/12/09 11:46:48 simons`
81			`// Mbist nameing changed, Artisan ram instance signal names fixed, some synthesis waning fixed.`
82			`//`
83			`// Revision 1.3 2003/04/07 01:19:07 lampret`
84			`// Added Altera LPM RAMs. Changed generic RAM output when OE inactive.`
85			`//`
86			`// Revision 1.2 2002/10/17 20:04:40 lampret`
87			`// Added BIST scan. Special VS RAMs need to be used to implement BIST.`
88			`//`
89			`// Revision 1.1 2002/01/03 08:16:15 lampret`
90			`// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.`
91			`//`
92			`// Revision 1.8 2001/11/02 18:57:14 lampret`
93			`// Modified virtual silicon instantiations.`
94			`//`
95			`// Revision 1.7 2001/10/21 17:57:16 lampret`
96			`// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.`
97			`//`
98			`// Revision 1.6 2001/10/14 13:12:09 lampret`
99			`// MP3 version.`
100			`//`
101			`// Revision 1.1.1.1 2001/10/06 10:18:36 igorm`
102			`// no message`
103			`//`
104			`// Revision 1.1 2001/08/09 13:39:33 lampret`
105			`// Major clean-up.`
106			`//`
107			`// Revision 1.2 2001/07/30 05:38:02 lampret`
108			`// Adding empty directories required by HDL coding guidelines`
109			`//`
110			`//`
111
112			`// synopsys translate_off`
113			`include "timescale.v"
114			`// synopsys translate_on`
115			`include "or1200_defines.v"
116
117			`module or1200_spram_1024x8(`
118			`ifdef OR1200_BIST
119			`// RAM BIST`
120			`mbist_si_i, mbist_so_o, mbist_ctrl_i,`
121			`endif
122			`// Generic synchronous single-port RAM interface`
123			`clk, rst, ce, we, oe, addr, di, doq`
124			`);`
125
126			`//`
127			`// Default address and data buses width`
128			`//`
129			`parameter aw = 10;`
130			`parameter dw = 8;`
131
132			`ifdef OR1200_BIST
133			`//`
134			`// RAM BIST`
135			`//`
136			`input mbist_si_i;`
137			input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;
138			`output mbist_so_o;`
139			`endif
140
141			`//`
142			`// Generic synchronous single-port RAM interface`
143			`//`
144			`input clk; // Clock`
145			`input rst; // Reset`
146			`input ce; // Chip enable input`
147			`input we; // Write enable input`
148			`input oe; // Output enable input`
149			`input [aw-1:0] addr; // address bus inputs`
150			`input [dw-1:0] di; // input data bus`
151			`output [dw-1:0] doq; // output data bus`
152
153			`//`
154			`// Internal wires and registers`
155			`//`
156
157			`ifdef OR1200_ARTISAN_SSP
158			`else
159			`ifdef OR1200_VIRTUALSILICON_SSP
160			`else
161			`ifdef OR1200_BIST
162			`assign mbist_so_o = mbist_si_i;`
163			`endif
164			`endif
165			`endif
166
167			`ifdef OR1200_ARTISAN_SSP
168
169			`//`
170			`// Instantiation of ASIC memory:`
171			`//`
172			`// Artisan Synchronous Single-Port RAM (ra1sh)`
173			`//`
174			`ifdef UNUSED
175			`art_hssp_1024x8 #(dw, 1<<aw, aw) artisan_ssp(`
176			`else
177			`ifdef OR1200_BIST
178			`art_hssp_1024x8_bist artisan_ssp(`
179			`else
180			`art_hssp_1024x8 artisan_ssp(`
181			`endif
182			`endif
183			`ifdef OR1200_BIST
184			`// RAM BIST`
185			`.mbist_si_i(mbist_si_i),`
186			`.mbist_so_o(mbist_so_o),`
187			`.mbist_ctrl_i(mbist_ctrl_i),`
188			`endif
189			`.CLK(clk),`
190			`.CEN(~ce),`
191			`.WEN(~we),`
192			`.A(addr),`
193			`.D(di),`
194			`.OEN(~oe),`
195			`.Q(doq)`
196			`);`
197
198			`else
199
200			`ifdef OR1200_AVANT_ATP
201
202			`//`
203			`// Instantiation of ASIC memory:`
204			`//`
205			`// Avant! Asynchronous Two-Port RAM`
206			`//`
207			`avant_atp avant_atp(`
208			`.web(~we),`
209			`.reb(),`
210			`.oeb(~oe),`
211			`.rcsb(),`
212			`.wcsb(),`
213			`.ra(addr),`
214			`.wa(addr),`
215			`.di(di),`
216			`.doq(doq)`
217			`);`
218
219			`else
220
221			`ifdef OR1200_VIRAGE_SSP
222
223			`//`
224			`// Instantiation of ASIC memory:`
225			`//`
226			`// Virage Synchronous 1-port R/W RAM`
227			`//`
228			`virage_ssp virage_ssp(`
229			`.clk(clk),`
230			`.adr(addr),`
231			`.d(di),`
232			`.we(we),`
233			`.oe(oe),`
234			`.me(ce),`
235			`.q(doq)`
236			`);`
237
238			`else
239
240			`ifdef OR1200_VIRTUALSILICON_SSP
241
242			`//`
243			`// Instantiation of ASIC memory:`
244			`//`
245			`// Virtual Silicon Single-Port Synchronous SRAM`
246			`//`
247			`ifdef UNUSED
248			`vs_hdsp_1024x8 #(1<<aw, aw-1, dw-1) vs_ssp(`
249			`else
250			`ifdef OR1200_BIST
251			`vs_hdsp_1024x8_bist vs_ssp(`
252			`else
253			`vs_hdsp_1024x8 vs_ssp(`
254			`endif
255			`endif
256			`ifdef OR1200_BIST
257			`// RAM BIST`
258			`.mbist_si_i(mbist_si_i),`
259			`.mbist_so_o(mbist_so_o),`
260			`.mbist_ctrl_i(mbist_ctrl_i),`
261			`endif
262			`.CK(clk),`
263			`.ADR(addr),`
264			`.DI(di),`
265			`.WEN(~we),`
266			`.CEN(~ce),`
267			`.OEN(~oe),`
268			`.DOUT(doq)`
269			`);`
270
271			`else
272
273			`ifdef OR1200_XILINX_RAMB4
274
275			`//`
276			`// Instantiation of FPGA memory:`
277			`//`
278			`// Virtex/Spartan2`
279			`//`
280
281			`//`
282			`// Block 0`
283			`//`
284			`RAMB4_S4 ramb4_s4_0(`
285			`.CLK(clk),`
286	142	marcus.erl	`.RST(1'b0),`
287	10	unneback	`.ADDR(addr),`
288			`.DI(di[3:0]),`
289			`.EN(ce),`
290			`.WE(we),`
291			`.DO(doq[3:0])`
292			`);`
293
294			`//`
295			`// Block 1`
296			`//`
297			`RAMB4_S4 ramb4_s4_1(`
298			`.CLK(clk),`
299	142	marcus.erl	`.RST(1'b0),`
300	10	unneback	`.ADDR(addr),`
301			`.DI(di[7:4]),`
302			`.EN(ce),`
303			`.WE(we),`
304			`.DO(doq[7:4])`
305			`);`
306
307			`else
308
309			`ifdef OR1200_XILINX_RAMB16
310
311			`//`
312			`// Instantiation of FPGA memory:`
313			`//`
314			`// Virtex4/Spartan3E`
315			`//`
316			`// Added By Nir Mor`
317			`//`
318
319			`RAMB16_S9 ramb16_s9(`
320			`.CLK(clk),`
321	142	marcus.erl	`.SSR(1'b0),`
322	10	unneback	`.ADDR({1'b0,addr}),`
323			`.DI(di),`
324			`.DIP(1'b0),`
325			`.EN(ce),`
326			`.WE(we),`
327			`.DO(doq),`
328			`.DOP()`
329			`);`
330
331			`else
332
333			`ifdef OR1200_ALTERA_LPM
334
335			`//`
336			`// Instantiation of FPGA memory:`
337			`//`
338			`// Altera LPM`
339			`//`
340			`// Added By Jamil Khatib`
341			`//`
342
343			`wire wr;`
344
345			`assign wr = ce & we;`
346
347			`initial $display("Using Altera LPM.");`
348
349			`lpm_ram_dq lpm_ram_dq_component (`
350			`.address(addr),`
351			`.inclock(clk),`
352			`.outclock(clk),`
353			`.data(di),`
354			`.we(wr),`
355			`.q(doq)`
356			`);`
357
358			`defparam lpm_ram_dq_component.lpm_width = dw,`
359			`lpm_ram_dq_component.lpm_widthad = aw,`
360			`lpm_ram_dq_component.lpm_indata = "REGISTERED",`
361			`lpm_ram_dq_component.lpm_address_control = "REGISTERED",`
362			`lpm_ram_dq_component.lpm_outdata = "UNREGISTERED",`
363			`lpm_ram_dq_component.lpm_hint = "USE_EAB=ON";`
364			`// examplar attribute lpm_ram_dq_component NOOPT TRUE`
365
366			`else
367
368			`//`
369			`// Generic single-port synchronous RAM model`
370			`//`
371
372			`//`
373			`// Generic RAM's registers and wires`
374			`//`
375			`reg [dw-1:0] mem [(1<<aw)-1:0]; // RAM content`
376			`reg [aw-1:0] addr_reg; // RAM address register`
377
378			`//`
379			`// Data output drivers`
380			`//`
381			`assign doq = (oe) ? mem[addr_reg] : {dw{1'b0}};`
382
383			`//`
384			`// RAM address register`
385			`//`
386			`always @(posedge clk or posedge rst)`
387			`if (rst)`
388			`addr_reg <= #1 {aw{1'b0}};`
389			`else if (ce)`
390			`addr_reg <= #1 addr;`
391
392			`//`
393			`// RAM write`
394			`//`
395			`always @(posedge clk)`
396			`if (ce && we)`
397			`mem[addr] <= #1 di;`
398
399			`endif // !OR1200_ALTERA_LPM
400			`endif // !OR1200_XILINX_RAMB16
401			`endif // !OR1200_XILINX_RAMB4
402			`endif // !OR1200_VIRTUALSILICON_SSP
403			`endif // !OR1200_VIRAGE_SSP
404			`endif // !OR1200_AVANT_ATP
405			`endif // !OR1200_ARTISAN_SSP
406
407			`endmodule`