URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_spram_256x21.v] - Blame information for rev 160

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Generic Single-Port Synchronous RAM                         ////
////                                                              ////
////  This file is part of memory library available from          ////
////  http://www.opencores.org/cvsweb.shtml/generic_memories/     ////
////                                                              ////
////  Description                                                 ////
////  This block is a wrapper with common single-port             ////
////  synchronous memory interface for different                  ////
////  types of ASIC and FPGA RAMs. Beside universal memory        ////
////  interface it also provides behavioral model of generic      ////
////  single-port synchronous RAM.                                ////
////  It should be used in all OPENCORES designs that want to be  ////
////  portable accross different target technologies and          ////
////  independent of target memory.                               ////
////                                                              ////
////  Supported ASIC RAMs are:                                    ////
////  - Artisan Single-Port Sync RAM                              ////
////  - Avant! Two-Port Sync RAM (*)                              ////
////  - Virage Single-Port Sync RAM                               ////
////  - Virtual Silicon Single-Port Sync RAM                      ////
////                                                              ////
////  Supported FPGA RAMs are:                                    ////
////  - Xilinx Virtex RAMBS16                                     ////
////  - Xilinx Virtex RAMB4                                       ////
////  - Altera LPM                                                ////
////                                                              ////
////  To Do:                                                      ////
////   - xilinx rams need external tri-state logic                ////
////   - fix avant! two-port ram                                  ////
////   - add additional RAMs                                      ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: or1200_spram_256x21.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Minor update: 
// Coding style changed.
//
// Revision 1.9  2005/10/19 11:37:56  jcastillo
// Added support for RAMB16 Xilinx4/Spartan3 primitives
//
// Revision 1.8  2004/06/08 18:15:32  lampret
// Changed behavior of the simulation generic models
//
// Revision 1.7  2004/04/05 08:29:57  lampret
// Merged branch_qmem into main tree.
//
// Revision 1.3.4.2  2003/12/09 11:46:48  simons
// Mbist nameing changed, Artisan ram instance signal names fixed, some synthesis waning fixed.
//
// Revision 1.3.4.1  2003/07/08 15:36:37  lampret
// Added embedded memory QMEM.
//
// Revision 1.3  2003/04/07 01:19:07  lampret
// Added Altera LPM RAMs. Changed generic RAM output when OE inactive.
//
// Revision 1.2  2002/10/17 20:04:40  lampret
// Added BIST scan. Special VS RAMs need to be used to implement BIST.
//
// Revision 1.1  2002/01/03 08:16:15  lampret
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.
//
// Revision 1.10  2001/11/27 21:24:04  lampret
// Changed instantiation name of VS RAMs.
//
// Revision 1.9  2001/11/27 19:45:04  lampret
// Fixed VS RAM instantiation - again.
//
// Revision 1.8  2001/11/23 21:42:31  simons
// Program counter divided to PPC and NPC.
//
// Revision 1.6  2001/10/21 17:57:16  lampret
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.
//
// Revision 1.5  2001/10/14 13:12:09  lampret
// MP3 version.
//
// Revision 1.1.1.1  2001/10/06 10:18:36  igorm
// no message
//
// Revision 1.1  2001/08/09 13:39:33  lampret
// Major clean-up.
//
// Revision 1.2  2001/07/30 05:38:02  lampret
// Adding empty directories required by HDL coding guidelines
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_spram_256x21(
`ifdef OR1200_BIST
        // RAM BIST
        mbist_si_i, mbist_so_o, mbist_ctrl_i,
`endif
        // Generic synchronous single-port RAM interface
        clk, rst, ce, we, oe, addr, di, doq
);
 
//
// Default address and data buses width
//
parameter aw = 8;
parameter dw = 21;
 
`ifdef OR1200_BIST
//
// RAM BIST
//
input mbist_si_i;
input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;
output mbist_so_o;
`endif
 
//
// Generic synchronous single-port RAM interface
//
input                   clk;    // Clock
input                   rst;    // Reset
input                   ce;     // Chip enable input
input                   we;     // Write enable input
input                   oe;     // Output enable input
input   [aw-1:0] addr;   // address bus inputs
input   [dw-1:0] di;     // input data bus
output  [dw-1:0] doq;    // output data bus
 
//
// Internal wires and registers
//
`ifdef OR1200_XILINX_RAMB4
wire    [10:0]           unconnected;
`else
`ifdef OR1200_XILINX_RAMB16
wire    [10:0]           unconnected;
`endif // !OR1200_XILINX_RAMB16
`endif // !OR1200_XILINX_RAMB4
 
`ifdef OR1200_ARTISAN_SSP
`else
`ifdef OR1200_VIRTUALSILICON_SSP
`else
`ifdef OR1200_BIST
assign mbist_so_o = mbist_si_i;
`endif
`endif
`endif
 
`ifdef OR1200_ARTISAN_SSP
 
//
// Instantiation of ASIC memory:
//
// Artisan Synchronous Single-Port RAM (ra1sh)
//
`ifdef UNUSED
art_hssp_256x21 #(dw, 1<<aw, aw) artisan_ssp(
`else
`ifdef OR1200_BIST
art_hssp_256x21_bist artisan_ssp(
`else
art_hssp_256x21 artisan_ssp(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i),
        .mbist_so_o(mbist_so_o),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CLK(clk),
        .CEN(~ce),
        .WEN(~we),
        .A(addr),
        .D(di),
        .OEN(~oe),
        .Q(doq)
);
 
`else
 
`ifdef OR1200_AVANT_ATP
 
//
// Instantiation of ASIC memory:
//
// Avant! Asynchronous Two-Port RAM
//
avant_atp avant_atp(
        .web(~we),
        .reb(),
        .oeb(~oe),
        .rcsb(),
        .wcsb(),
        .ra(addr),
        .wa(addr),
        .di(di),
        .doq(doq)
);
 
`else
 
`ifdef OR1200_VIRAGE_SSP
 
//
// Instantiation of ASIC memory:
//
// Virage Synchronous 1-port R/W RAM
//
virage_ssp virage_ssp(
        .clk(clk),
        .adr(addr),
        .d(di),
        .we(we),
        .oe(oe),
        .me(ce),
        .q(doq)
);
 
`else
 
`ifdef OR1200_VIRTUALSILICON_SSP
 
//
// Instantiation of ASIC memory:
//
// Virtual Silicon Single-Port Synchronous SRAM
//
`ifdef UNUSED
vs_hdsp_256x21 #(1<<aw, aw-1, dw-1) vs_ssp(
`else
`ifdef OR1200_BIST
vs_hdsp_256x21_bist vs_ssp(
`else
vs_hdsp_256x21 vs_ssp(
`endif
`endif
`ifdef OR1200_BIST
        // RAM BIST
        .mbist_si_i(mbist_si_i),
        .mbist_so_o(mbist_so_o),
        .mbist_ctrl_i(mbist_ctrl_i),
`endif
        .CK(clk),
        .ADR(addr),
        .DI(di),
        .WEN(~we),
        .CEN(~ce),
        .OEN(~oe),
        .DOUT(doq)
);
 
`else
 
`ifdef OR1200_XILINX_RAMB4
 
//
// Instantiation of FPGA memory:
//
// Virtex/Spartan2
//
 
//
// Block 0
//
RAMB4_S16 ramb4_s16_0(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI(di[15:0]),
        .EN(ce),
        .WE(we),
        .DO(doq[15:0])
);
 
//
// Block 1
//
RAMB4_S16 ramb4_s16_1(
        .CLK(clk),
        .RST(1'b0),
        .ADDR(addr),
        .DI({11'b00000000000, di[20:16]}),
        .EN(ce),
        .WE(we),
        .DO({unconnected, doq[20:16]})
);
 
`else
 
`ifdef OR1200_XILINX_RAMB16
 
//
// Instantiation of FPGA memory:
//
// Virtex4/Spartan3E
//
// Added By Nir Mor
//
 
RAMB16_S36 ramb16_s36(
        .CLK(clk),
        .SSR(1'b0),
        .ADDR({1'b0,addr}),
        .DI({11'b00000000000,di[20:0]}),
        .DIP(4'h0),
        .EN(ce),
        .WE(we),
        .DO({unconnected,doq[20:0]}),
        .DOP()
);
 
`else
 
`ifdef OR1200_ALTERA_LPM
 
//
// Instantiation of FPGA memory:
//
// Altera LPM
//
// Added By Jamil Khatib
//
 
wire    wr;
 
assign  wr = ce & we;
 
initial $display("Using Altera LPM.");
 
lpm_ram_dq lpm_ram_dq_component (
        .address(addr),
        .inclock(clk),
        .outclock(clk),
        .data(di),
        .we(wr),
        .q(doq)
);
 
defparam lpm_ram_dq_component.lpm_width = dw,
        lpm_ram_dq_component.lpm_widthad = aw,
        lpm_ram_dq_component.lpm_indata = "REGISTERED",
        lpm_ram_dq_component.lpm_address_control = "REGISTERED",
        lpm_ram_dq_component.lpm_outdata = "UNREGISTERED",
        lpm_ram_dq_component.lpm_hint = "USE_EAB=ON";
        // examplar attribute lpm_ram_dq_component NOOPT TRUE
 
`else
 
//
// Generic single-port synchronous RAM model
//
 
//
// Generic RAM's registers and wires
//
reg     [dw-1:0] mem [(1<<aw)-1:0];       // RAM content
reg     [aw-1:0] addr_reg;               // RAM address register
 
//
// Data output drivers
//
assign doq = (oe) ? mem[addr_reg] : {dw{1'b0}};
 
//
// RAM adress register
//
always @(posedge clk or posedge rst)
        if (rst)
                addr_reg <= #1 {aw{1'b0}};
        else if (ce)
                addr_reg <= #1 addr;
 
//
// RAM write
//
always @(posedge clk)
        if (ce && we)
                mem[addr] <= #1 di;
 
`endif  // !OR1200_ALTERA_LPM
`endif  // !OR1200_XILINX_RAMB16
`endif  // !OR1200_XILINX_RAMB4
`endif  // !OR1200_VIRTUALSILICON_SSP
`endif  // !OR1200_VIRAGE_SSP
`endif  // !OR1200_AVANT_ATP
`endif  // !OR1200_ARTISAN_SSP
 
endmodule

Browse

Tools

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_spram_256x21.v] - Blame information for rev 160

Line No.	Rev	Author	Line
1	10	unneback	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// Generic Single-Port Synchronous RAM ////`
4			`//// ////`
5			`//// This file is part of memory library available from ////`
6			`//// http://www.opencores.org/cvsweb.shtml/generic_memories/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// This block is a wrapper with common single-port ////`
10			`//// synchronous memory interface for different ////`
11			`//// types of ASIC and FPGA RAMs. Beside universal memory ////`
12			`//// interface it also provides behavioral model of generic ////`
13			`//// single-port synchronous RAM. ////`
14			`//// It should be used in all OPENCORES designs that want to be ////`
15			`//// portable accross different target technologies and ////`
16			`//// independent of target memory. ////`
17			`//// ////`
18			`//// Supported ASIC RAMs are: ////`
19			`//// - Artisan Single-Port Sync RAM ////`
20			`//// - Avant! Two-Port Sync RAM (*) ////`
21			`//// - Virage Single-Port Sync RAM ////`
22			`//// - Virtual Silicon Single-Port Sync RAM ////`
23			`//// ////`
24			`//// Supported FPGA RAMs are: ////`
25			`//// - Xilinx Virtex RAMBS16 ////`
26			`//// - Xilinx Virtex RAMB4 ////`
27			`//// - Altera LPM ////`
28			`//// ////`
29			`//// To Do: ////`
30			`//// - xilinx rams need external tri-state logic ////`
31			`//// - fix avant! two-port ram ////`
32			`//// - add additional RAMs ////`
33			`//// ////`
34			`//// Author(s): ////`
35			`//// - Damjan Lampret, lampret@opencores.org ////`
36			`//// ////`
37			`//////////////////////////////////////////////////////////////////////`
38			`//// ////`
39			`//// Copyright (C) 2000 Authors and OPENCORES.ORG ////`
40			`//// ////`
41			`//// This source file may be used and distributed without ////`
42			`//// restriction provided that this copyright statement is not ////`
43			`//// removed from the file and that any derivative work contains ////`
44			`//// the original copyright notice and the associated disclaimer. ////`
45			`//// ////`
46			`//// This source file is free software; you can redistribute it ////`
47			`//// and/or modify it under the terms of the GNU Lesser General ////`
48			`//// Public License as published by the Free Software Foundation; ////`
49			`//// either version 2.1 of the License, or (at your option) any ////`
50			`//// later version. ////`
51			`//// ////`
52			`//// This source is distributed in the hope that it will be ////`
53			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
54			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
55			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
56			`//// details. ////`
57			`//// ////`
58			`//// You should have received a copy of the GNU Lesser General ////`
59			`//// Public License along with this source; if not, download it ////`
60			`//// from http://www.opencores.org/lgpl.shtml ////`
61			`//// ////`
62			`//////////////////////////////////////////////////////////////////////`
63			`//`
64			`// CVS Revision History`
65			`//`
66	142	marcus.erl	`// $Log: or1200_spram_256x21.v,v $`
67			`// Revision 2.0 2010/06/30 11:00:00 ORSoC`
68			`// Minor update:`
69			`// Coding style changed.`
70			`//`
71			`// Revision 1.9 2005/10/19 11:37:56 jcastillo`
72			`// Added support for RAMB16 Xilinx4/Spartan3 primitives`
73			`//`
74	10	unneback	`// Revision 1.8 2004/06/08 18:15:32 lampret`
75			`// Changed behavior of the simulation generic models`
76			`//`
77			`// Revision 1.7 2004/04/05 08:29:57 lampret`
78			`// Merged branch_qmem into main tree.`
79			`//`
80			`// Revision 1.3.4.2 2003/12/09 11:46:48 simons`
81			`// Mbist nameing changed, Artisan ram instance signal names fixed, some synthesis waning fixed.`
82			`//`
83			`// Revision 1.3.4.1 2003/07/08 15:36:37 lampret`
84			`// Added embedded memory QMEM.`
85			`//`
86			`// Revision 1.3 2003/04/07 01:19:07 lampret`
87			`// Added Altera LPM RAMs. Changed generic RAM output when OE inactive.`
88			`//`
89			`// Revision 1.2 2002/10/17 20:04:40 lampret`
90			`// Added BIST scan. Special VS RAMs need to be used to implement BIST.`
91			`//`
92			`// Revision 1.1 2002/01/03 08:16:15 lampret`
93			`// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.`
94			`//`
95			`// Revision 1.10 2001/11/27 21:24:04 lampret`
96			`// Changed instantiation name of VS RAMs.`
97			`//`
98			`// Revision 1.9 2001/11/27 19:45:04 lampret`
99			`// Fixed VS RAM instantiation - again.`
100			`//`
101			`// Revision 1.8 2001/11/23 21:42:31 simons`
102			`// Program counter divided to PPC and NPC.`
103			`//`
104			`// Revision 1.6 2001/10/21 17:57:16 lampret`
105			`// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.`
106			`//`
107			`// Revision 1.5 2001/10/14 13:12:09 lampret`
108			`// MP3 version.`
109			`//`
110			`// Revision 1.1.1.1 2001/10/06 10:18:36 igorm`
111			`// no message`
112			`//`
113			`// Revision 1.1 2001/08/09 13:39:33 lampret`
114			`// Major clean-up.`
115			`//`
116			`// Revision 1.2 2001/07/30 05:38:02 lampret`
117			`// Adding empty directories required by HDL coding guidelines`
118			`//`
119			`//`
120
121			`// synopsys translate_off`
122			`include "timescale.v"
123			`// synopsys translate_on`
124			`include "or1200_defines.v"
125
126			`module or1200_spram_256x21(`
127			`ifdef OR1200_BIST
128			`// RAM BIST`
129			`mbist_si_i, mbist_so_o, mbist_ctrl_i,`
130			`endif
131			`// Generic synchronous single-port RAM interface`
132			`clk, rst, ce, we, oe, addr, di, doq`
133			`);`
134
135			`//`
136			`// Default address and data buses width`
137			`//`
138			`parameter aw = 8;`
139			`parameter dw = 21;`
140
141			`ifdef OR1200_BIST
142			`//`
143			`// RAM BIST`
144			`//`
145			`input mbist_si_i;`
146			input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;
147			`output mbist_so_o;`
148			`endif
149
150			`//`
151			`// Generic synchronous single-port RAM interface`
152			`//`
153			`input clk; // Clock`
154			`input rst; // Reset`
155			`input ce; // Chip enable input`
156			`input we; // Write enable input`
157			`input oe; // Output enable input`
158			`input [aw-1:0] addr; // address bus inputs`
159			`input [dw-1:0] di; // input data bus`
160			`output [dw-1:0] doq; // output data bus`
161
162			`//`
163			`// Internal wires and registers`
164			`//`
165			`ifdef OR1200_XILINX_RAMB4
166			`wire [10:0] unconnected;`
167			`else
168			`ifdef OR1200_XILINX_RAMB16
169			`wire [10:0] unconnected;`
170			`endif // !OR1200_XILINX_RAMB16
171			`endif // !OR1200_XILINX_RAMB4
172
173			`ifdef OR1200_ARTISAN_SSP
174			`else
175			`ifdef OR1200_VIRTUALSILICON_SSP
176			`else
177			`ifdef OR1200_BIST
178			`assign mbist_so_o = mbist_si_i;`
179			`endif
180			`endif
181			`endif
182
183			`ifdef OR1200_ARTISAN_SSP
184
185			`//`
186			`// Instantiation of ASIC memory:`
187			`//`
188			`// Artisan Synchronous Single-Port RAM (ra1sh)`
189			`//`
190			`ifdef UNUSED
191			`art_hssp_256x21 #(dw, 1<<aw, aw) artisan_ssp(`
192			`else
193			`ifdef OR1200_BIST
194			`art_hssp_256x21_bist artisan_ssp(`
195			`else
196			`art_hssp_256x21 artisan_ssp(`
197			`endif
198			`endif
199			`ifdef OR1200_BIST
200			`// RAM BIST`
201			`.mbist_si_i(mbist_si_i),`
202			`.mbist_so_o(mbist_so_o),`
203			`.mbist_ctrl_i(mbist_ctrl_i),`
204			`endif
205			`.CLK(clk),`
206			`.CEN(~ce),`
207			`.WEN(~we),`
208			`.A(addr),`
209			`.D(di),`
210			`.OEN(~oe),`
211			`.Q(doq)`
212			`);`
213
214			`else
215
216			`ifdef OR1200_AVANT_ATP
217
218			`//`
219			`// Instantiation of ASIC memory:`
220			`//`
221			`// Avant! Asynchronous Two-Port RAM`
222			`//`
223			`avant_atp avant_atp(`
224			`.web(~we),`
225			`.reb(),`
226			`.oeb(~oe),`
227			`.rcsb(),`
228			`.wcsb(),`
229			`.ra(addr),`
230			`.wa(addr),`
231			`.di(di),`
232			`.doq(doq)`
233			`);`
234
235			`else
236
237			`ifdef OR1200_VIRAGE_SSP
238
239			`//`
240			`// Instantiation of ASIC memory:`
241			`//`
242			`// Virage Synchronous 1-port R/W RAM`
243			`//`
244			`virage_ssp virage_ssp(`
245			`.clk(clk),`
246			`.adr(addr),`
247			`.d(di),`
248			`.we(we),`
249			`.oe(oe),`
250			`.me(ce),`
251			`.q(doq)`
252			`);`
253
254			`else
255
256			`ifdef OR1200_VIRTUALSILICON_SSP
257
258			`//`
259			`// Instantiation of ASIC memory:`
260			`//`
261			`// Virtual Silicon Single-Port Synchronous SRAM`
262			`//`
263			`ifdef UNUSED
264			`vs_hdsp_256x21 #(1<<aw, aw-1, dw-1) vs_ssp(`
265			`else
266			`ifdef OR1200_BIST
267			`vs_hdsp_256x21_bist vs_ssp(`
268			`else
269			`vs_hdsp_256x21 vs_ssp(`
270			`endif
271			`endif
272			`ifdef OR1200_BIST
273			`// RAM BIST`
274			`.mbist_si_i(mbist_si_i),`
275			`.mbist_so_o(mbist_so_o),`
276			`.mbist_ctrl_i(mbist_ctrl_i),`
277			`endif
278			`.CK(clk),`
279			`.ADR(addr),`
280			`.DI(di),`
281			`.WEN(~we),`
282			`.CEN(~ce),`
283			`.OEN(~oe),`
284			`.DOUT(doq)`
285			`);`
286
287			`else
288
289			`ifdef OR1200_XILINX_RAMB4
290
291			`//`
292			`// Instantiation of FPGA memory:`
293			`//`
294			`// Virtex/Spartan2`
295			`//`
296
297			`//`
298			`// Block 0`
299			`//`
300			`RAMB4_S16 ramb4_s16_0(`
301			`.CLK(clk),`
302	142	marcus.erl	`.RST(1'b0),`
303	10	unneback	`.ADDR(addr),`
304			`.DI(di[15:0]),`
305			`.EN(ce),`
306			`.WE(we),`
307			`.DO(doq[15:0])`
308			`);`
309
310			`//`
311			`// Block 1`
312			`//`
313			`RAMB4_S16 ramb4_s16_1(`
314			`.CLK(clk),`
315	142	marcus.erl	`.RST(1'b0),`
316	10	unneback	`.ADDR(addr),`
317			`.DI({11'b00000000000, di[20:16]}),`
318			`.EN(ce),`
319			`.WE(we),`
320			`.DO({unconnected, doq[20:16]})`
321			`);`
322
323			`else
324
325			`ifdef OR1200_XILINX_RAMB16
326
327			`//`
328			`// Instantiation of FPGA memory:`
329			`//`
330			`// Virtex4/Spartan3E`
331			`//`
332			`// Added By Nir Mor`
333			`//`
334
335			`RAMB16_S36 ramb16_s36(`
336			`.CLK(clk),`
337	142	marcus.erl	`.SSR(1'b0),`
338	10	unneback	`.ADDR({1'b0,addr}),`
339			`.DI({11'b00000000000,di[20:0]}),`
340			`.DIP(4'h0),`
341			`.EN(ce),`
342			`.WE(we),`
343			`.DO({unconnected,doq[20:0]}),`
344			`.DOP()`
345			`);`
346
347			`else
348
349			`ifdef OR1200_ALTERA_LPM
350
351			`//`
352			`// Instantiation of FPGA memory:`
353			`//`
354			`// Altera LPM`
355			`//`
356			`// Added By Jamil Khatib`
357			`//`
358
359			`wire wr;`
360
361			`assign wr = ce & we;`
362
363			`initial $display("Using Altera LPM.");`
364
365			`lpm_ram_dq lpm_ram_dq_component (`
366			`.address(addr),`
367			`.inclock(clk),`
368			`.outclock(clk),`
369			`.data(di),`
370			`.we(wr),`
371			`.q(doq)`
372			`);`
373
374			`defparam lpm_ram_dq_component.lpm_width = dw,`
375			`lpm_ram_dq_component.lpm_widthad = aw,`
376			`lpm_ram_dq_component.lpm_indata = "REGISTERED",`
377			`lpm_ram_dq_component.lpm_address_control = "REGISTERED",`
378			`lpm_ram_dq_component.lpm_outdata = "UNREGISTERED",`
379			`lpm_ram_dq_component.lpm_hint = "USE_EAB=ON";`
380			`// examplar attribute lpm_ram_dq_component NOOPT TRUE`
381
382			`else
383
384			`//`
385			`// Generic single-port synchronous RAM model`
386			`//`
387
388			`//`
389			`// Generic RAM's registers and wires`
390			`//`
391			`reg [dw-1:0] mem [(1<<aw)-1:0]; // RAM content`
392			`reg [aw-1:0] addr_reg; // RAM address register`
393
394			`//`
395			`// Data output drivers`
396			`//`
397			`assign doq = (oe) ? mem[addr_reg] : {dw{1'b0}};`
398
399			`//`
400			`// RAM adress register`
401			`//`
402			`always @(posedge clk or posedge rst)`
403			`if (rst)`
404			`addr_reg <= #1 {aw{1'b0}};`
405			`else if (ce)`
406			`addr_reg <= #1 addr;`
407
408			`//`
409			`// RAM write`
410			`//`
411			`always @(posedge clk)`
412			`if (ce && we)`
413			`mem[addr] <= #1 di;`
414
415			`endif // !OR1200_ALTERA_LPM
416			`endif // !OR1200_XILINX_RAMB16
417			`endif // !OR1200_XILINX_RAMB4
418			`endif // !OR1200_VIRTUALSILICON_SSP
419			`endif // !OR1200_VIRAGE_SSP
420			`endif // !OR1200_AVANT_ATP
421			`endif // !OR1200_ARTISAN_SSP
422
423			`endmodule`