OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [or1k_startup/] [sw/] [OR1K_startup.S] - Blame information for rev 167

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 marcus.erl 
/*
2 
        Register usage
3 
        R0 = 0
4 
        R1 = pointer to destination
5 
        R2 = nr of words to be copied
6 
        R3 = data
7 
        R4 = pointer to SPI core
8 
        R5 = spi control word
9 
        R6 = jump adr
10 
        R7 = nr of control words
11 
        r8 = adr pointer
12 
*/
13 
        .equ spi_base,0xb0000000 ;
14 
        .equ spi_ctrl,0x0520    ;
15 
        .equ read_cmd, 0x03000000 ;
16 
 
17 
        .global start           ;
18 
        .text
19 
start:
20 
        l.movhi r0,0x0          ;
21 
        l.ori r1,r0,0x0 ; # R1 = 0x0
22 
        l.movhi r4,hi(spi_base) ; # R4 = spi base
23 
        l.ori r5,r0,lo(spi_ctrl); # R5 = spi control
24 
 
25 
        # set SPI regs, can be removed if reset state is changed in IP core
26 
        #l.ori r3,r0,0x420      ;
27 
        #l.sw 0x10(r4),r3       ; # tx at negedge, 32 bit transfer
28 
        #l.movhi r3,0x0300      ;
29 
        #l.ori r3,r3,0x0        ;
30 
        #l.sw 0x0(r4),r3        ; # TX = 0x03000000
31 
        #l.sw 0x14(r4),r0       ; # prescaler to zero
32 
 
33 
        # set slave select active
34 
        l.ori r3,r0,0x1         ; # R3 = 0x1
35 
 
36 
        # initiate SPI FLASH READ
37 
        l.jal read              ;
38 
        l.sw 0x18(r4),r3        ; # ss active
39 
 
40 
        # read
41 
        l.jal read              ;
42 
        l.sw 0x0(r4),r0         ; # set TX to zero
43 
        l.or r2,r3,r3           ; # R2 = nr of words
44 
 
45 
loop1:  l.jal read              ; # read adr pointer
46 
        l.addi r1,r1,0x8        ;
47 
        l.jal read              ; # read data
48 
        l.or r8,r3,r3           ; # copy adr pointer to r8
49 
        l.sfeq r8,r0            ;
50 
        l.bnf loop1             ;
51 
        l.sw 0x0(r8),r3         ; # write control data
52 
 
53 
loop2:  l.jal read              ;
54 
        l.addi r1,r1,0x4        ;
55 
        l.sw 0x0(r1),r3         ; # write to RAM
56 
        l.sfeq r1,r2            ;
57 
        l.bnf loop2             ;
58 
        l.ori r6,r0,0x100       ;
59 
        l.jr r6                 ;
60 
        # set slave select inactive
61 
        l.sw 0x18(r4),r0        ; # set slave select inactive
62 
 
63 
read:
64 
        l.sw 0x10(r4),r5        ; # write spi control
65 
w4busy: l.lwz r3,0x10(r4)       ;
66 
        l.sfeqi r3,lo(spi_ctrl) ;
67 
        l.bf w4busy             ;
68 
        l.nop                   ;
69 
        l.jr r9                 ;
70 
        l.lwz r3,0x0(r4)        ; # R3 = RX
71 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.