OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [or1k_startup/] [sw/] [OR1K_startup.S] - Blame information for rev 228

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 marcus.erl
/*
2
        Register usage
3
        R0 = 0
4
        R1 = pointer to destination
5
        R2 = nr of words to be copied
6
        R3 = data
7
        R4 = pointer to SPI core
8
        R5 = spi control word
9
        R6 = jump adr
10
        R7 = nr of control words
11
        r8 = adr pointer
12
*/
13
        .equ spi_base,0xb0000000 ;
14
        .equ spi_ctrl,0x0520    ;
15
        .equ read_cmd, 0x03000000 ;
16
 
17
        .global start           ;
18
        .text
19
start:
20
        l.movhi r0,0x0          ;
21
        l.ori r1,r0,0x0 ; # R1 = 0x0
22
        l.movhi r4,hi(spi_base) ; # R4 = spi base
23
        l.ori r5,r0,lo(spi_ctrl); # R5 = spi control
24
 
25
        # set SPI regs, can be removed if reset state is changed in IP core
26
        #l.ori r3,r0,0x420      ;
27
        #l.sw 0x10(r4),r3       ; # tx at negedge, 32 bit transfer
28
        #l.movhi r3,0x0300      ;
29
        #l.ori r3,r3,0x0        ;
30
        #l.sw 0x0(r4),r3        ; # TX = 0x03000000
31
        #l.sw 0x14(r4),r0       ; # prescaler to zero
32
 
33
        # set slave select active
34
        l.ori r3,r0,0x1         ; # R3 = 0x1
35
 
36
        # initiate SPI FLASH READ
37
        l.jal read              ;
38
        l.sw 0x18(r4),r3        ; # ss active
39
 
40
        # read
41
        l.jal read              ;
42
        l.sw 0x0(r4),r0         ; # set TX to zero
43
        l.or r2,r3,r3           ; # R2 = nr of words
44
 
45
loop1:  l.jal read              ; # read adr pointer
46
        l.addi r1,r1,0x8        ;
47
        l.jal read              ; # read data
48
        l.or r8,r3,r3           ; # copy adr pointer to r8
49
        l.sfeq r8,r0            ;
50
        l.bnf loop1             ;
51
        l.sw 0x0(r8),r3         ; # write control data
52
 
53
loop2:  l.jal read              ;
54
        l.addi r1,r1,0x4        ;
55
        l.sw 0x0(r1),r3         ; # write to RAM
56
        l.sfeq r1,r2            ;
57
        l.bnf loop2             ;
58
        l.ori r6,r0,0x100       ;
59
        l.jr r6                 ;
60
        # set slave select inactive
61
        l.sw 0x18(r4),r0        ; # set slave select inactive
62
 
63
read:
64
        l.sw 0x10(r4),r5        ; # write spi control
65
w4busy: l.lwz r3,0x10(r4)       ;
66
        l.sfeqi r3,lo(spi_ctrl) ;
67
        l.bf w4busy             ;
68
        l.nop                   ;
69
        l.jr r9                 ;
70
        l.lwz r3,0x0(r4)        ; # R3 = RX
71
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.