URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1ksim/] [depcomp] - Blame information for rev 294

Go to most recent revision | Details | Compare with Previous | View Log


#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
 
scriptversion=2009-04-28.21; # UTC
 
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
# Software Foundation, Inc.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
 
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see .
 
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
 
# Originally written by Alexandre Oliva .
 
case $1 in
  '')
     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
     exit 1;
     ;;
  -h | --h*)
    cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
 
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
 
Environment variables:
  depmode     Dependency tracking mode.
  source      Source file read by `PROGRAMS ARGS'.
  object      Object file output by `PROGRAMS ARGS'.
  DEPDIR      directory where to store dependencies.
  depfile     Dependency file to output.
  tmpdepfile  Temporary file to use when outputing dependencies.
  libtool     Whether libtool is used (yes/no).
 
Report bugs to .
EOF
    exit $?
    ;;
  -v | --v*)
    echo "depcomp $scriptversion"
    exit $?
    ;;
esac
 
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
  echo "depcomp: Variables source, object and depmode must be set" 1>&2
  exit 1
fi
 
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
rm -f "$tmpdepfile"
 
# Some modes work just like other modes, but use different flags.  We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write.  Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
  # HP compiler uses -M and no extra arg.
  gccflag=-M
  depmode=gcc
fi
 
if test "$depmode" = dashXmstdout; then
   # This is just like dashmstdout with a different argument.
   dashmflag=-xM
   depmode=dashmstdout
fi
 
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
   # This is just like msvisualcpp but w/o cygpath translation.
   # Just convert the backslash-escaped backslashes to single forward
   # slashes to satisfy depend.m4
   cygpath_u="sed s,\\\\\\\\,/,g"
   depmode=msvisualcpp
fi
 
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff.  Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am.  Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
  for arg
  do
    case $arg in
    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
    *)  set fnord "$@" "$arg" ;;
    esac
    shift # fnord
    shift # $arg
  done
  "$@"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  mv "$tmpdepfile" "$depfile"
  ;;
 
gcc)
## There are various ways to get dependency output from gcc.  Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
##   up in a subdir.  Having to rename by hand is ugly.
##   (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
##   -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
##   than renaming).
  if test -z "$gccflag"; then
    gccflag=-MD,
  fi
  "$@" -Wp,"$gccflag$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
  sed -e 's/^[^:]*: / /' \
      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header).  We avoid this by adding
## dummy dependencies for each header file.  Too bad gcc doesn't do
## this for us directly.
  tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'.  On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
hp)
  # This case exists only to let depend.m4 do its work.  It works by
  # looking at the text of this script.  This case will never be run,
  # since it is checked for above.
  exit 1
  ;;
 
sgi)
  if test "$libtool" = yes; then
    "$@" "-Wp,-MDupdate,$tmpdepfile"
  else
    "$@" -MDupdate "$tmpdepfile"
  fi
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
 
  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
    echo "$object : \\" > "$depfile"
 
    # Clip off the initial element (the dependent).  Don't try to be
    # clever and replace this with sed code, as IRIX sed won't handle
    # lines with more than a fixed number of characters (4096 in
    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
    # the IRIX cc adds comments like `#:fec' to the end of the
    # dependency line.
    tr ' ' '
' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
    tr '
' ' ' >> "$depfile"
    echo >> "$depfile"
 
    # The second pass generates a dummy entry for each header file.
    tr ' ' '
' < "$tmpdepfile" \
   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
   >> "$depfile"
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
    # "include basename.Plo" scheme.
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile"
  ;;
 
aix)
  # The C for AIX Compiler uses -M and outputs the dependencies
  # in a .u file.  In older versions, this file always lives in the
  # current directory.  Also, the AIX compiler puts `$object:' at the
  # start of each line; $object doesn't have directory information.
  # Version 6 uses the directory in both cases.
  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
  test "x$dir" = "x$object" && dir=
  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
  if test "$libtool" = yes; then
    tmpdepfile1=$dir$base.u
    tmpdepfile2=$base.u
    tmpdepfile3=$dir.libs/$base.u
    "$@" -Wc,-M
  else
    tmpdepfile1=$dir$base.u
    tmpdepfile2=$dir$base.u
    tmpdepfile3=$dir$base.u
    "$@" -M
  fi
  stat=$?
 
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
    exit $stat
  fi
 
  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
  do
    test -f "$tmpdepfile" && break
  done
  if test -f "$tmpdepfile"; then
    # Each line is of the form `foo.o: dependent.h'.
    # Do two passes, one to just change these to
    # `$object: dependent.h' and one to simply `dependent.h:'.
    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
    # That's a tab and a space in the [].
    sed -e 's,^.*\.[a-z]*:[      ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
    # "include basename.Plo" scheme.
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile"
  ;;
 
icc)
  # Intel's C compiler understands `-MD -MF file'.  However on
  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
  # ICC 7.0 will fill foo.d with something like
  #    foo.o: sub/foo.c
  #    foo.o: sub/foo.h
  # which is wrong.  We want:
  #    sub/foo.o: sub/foo.c
  #    sub/foo.o: sub/foo.h
  #    sub/foo.c:
  #    sub/foo.h:
  # ICC 7.1 will output
  #    foo.o: sub/foo.c sub/foo.h
  # and will wrap long lines using \ :
  #    foo.o: sub/foo.c ... \
  #     sub/foo.h ... \
  #     ...
 
  "$@" -MD -MF "$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  # Each line is of the form `foo.o: dependent.h',
  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
  # Do two passes, one to just change these to
  # `$object: dependent.h' and one to simply `dependent.h:'.
  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
  # Some versions of the HPUX 10.20 sed can't process this invocation
  # correctly.  Breaking it into two sed invocations is a workaround.
  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
    sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
hp2)
  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
  # compilers, which have integrated preprocessors.  The correct option
  # to use with these is +Maked; it writes dependencies to a file named
  # 'foo.d', which lands next to the object file, wherever that
  # happens to be.
  # Much of this is similar to the tru64 case; see comments there.
  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
  test "x$dir" = "x$object" && dir=
  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
  if test "$libtool" = yes; then
    tmpdepfile1=$dir$base.d
    tmpdepfile2=$dir.libs/$base.d
    "$@" -Wc,+Maked
  else
    tmpdepfile1=$dir$base.d
    tmpdepfile2=$dir$base.d
    "$@" +Maked
  fi
  stat=$?
  if test $stat -eq 0; then :
  else
     rm -f "$tmpdepfile1" "$tmpdepfile2"
     exit $stat
  fi
 
  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
  do
    test -f "$tmpdepfile" && break
  done
  if test -f "$tmpdepfile"; then
    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
    # Add `dependent.h:' lines.
    sed -ne '2,${
               s/^ *//
               s/ \\*$//
               s/$/:/
               p
             }' "$tmpdepfile" >> "$depfile"
  else
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile" "$tmpdepfile2"
  ;;
 
tru64)
   # The Tru64 compiler uses -MD to generate dependencies as a side
   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
   # dependencies in `foo.d' instead, so we check for that too.
   # Subdirectories are respected.
   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
   test "x$dir" = "x$object" && dir=
   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
   if test "$libtool" = yes; then
      # With Tru64 cc, shared objects can also be used to make a
      # static library.  This mechanism is used in libtool 1.4 series to
      # handle both shared and static libraries in a single compilation.
      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
      #
      # With libtool 1.5 this exception was removed, and libtool now
      # generates 2 separate objects for the 2 libraries.  These two
      # compilations output dependencies in $dir.libs/$base.o.d and
      # in $dir$base.o.d.  We have to check for both files, because
      # one of the two compilations can be disabled.  We should prefer
      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
      # automatically cleaned when .libs/ is deleted, while ignoring
      # the former would cause a distcleancheck panic.
      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
      tmpdepfile2=$dir$base.o.d          # libtool 1.5
      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
      "$@" -Wc,-MD
   else
      tmpdepfile1=$dir$base.o.d
      tmpdepfile2=$dir$base.d
      tmpdepfile3=$dir$base.d
      tmpdepfile4=$dir$base.d
      "$@" -MD
   fi
 
   stat=$?
   if test $stat -eq 0; then :
   else
      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
      exit $stat
   fi
 
   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
   do
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
      # That's a tab and a space in the [].
      sed -e 's,^.*\.[a-z]*:[    ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
      echo "#dummy" > "$depfile"
   fi
   rm -f "$tmpdepfile"
   ;;
 
#nosideeffect)
  # This comment above is used by automake to tell side-effect
  # dependency tracking mechanisms from slower ones.
 
dashmstdout)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout, regardless of -o.
  "$@" || exit $?
 
  # Remove the call to Libtool.
  if test "$libtool" = yes; then
    while test "X$1" != 'X--mode=compile'; do
      shift
    done
    shift
  fi
 
  # Remove `-o $object'.
  IFS=" "
  for arg
  do
    case $arg in
    -o)
      shift
      ;;
    $object)
      shift
      ;;
    *)
      set fnord "$@" "$arg"
      shift # fnord
      shift # $arg
      ;;
    esac
  done
 
  test -z "$dashmflag" && dashmflag=-M
  # Require at least two characters before searching for `:'
  # in the target name.  This is to cope with DOS-style filenames:
  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
  "$@" $dashmflag |
    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
  rm -f "$depfile"
  cat < "$tmpdepfile" > "$depfile"
  tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
dashXmstdout)
  # This case only exists to satisfy depend.m4.  It is never actually
  # run, as this mode is specially recognized in the preamble.
  exit 1
  ;;
 
makedepend)
  "$@" || exit $?
  # Remove any Libtool call
  if test "$libtool" = yes; then
    while test "X$1" != 'X--mode=compile'; do
      shift
    done
    shift
  fi
  # X makedepend
  shift
  cleared=no eat=no
  for arg
  do
    case $cleared in
    no)
      set ""; shift
      cleared=yes ;;
    esac
    if test $eat = yes; then
      eat=no
      continue
    fi
    case "$arg" in
    -D*|-I*)
      set fnord "$@" "$arg"; shift ;;
    # Strip any option that makedepend may not understand.  Remove
    # the object too, otherwise makedepend will parse it as a source file.
    -arch)
      eat=yes ;;
    -*|$object)
      ;;
    *)
      set fnord "$@" "$arg"; shift ;;
    esac
  done
  obj_suffix=`echo "$object" | sed 's/^.*\././'`
  touch "$tmpdepfile"
  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
  rm -f "$depfile"
  cat < "$tmpdepfile" > "$depfile"
  sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile" "$tmpdepfile".bak
  ;;
 
cpp)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout.
  "$@" || exit $?
 
  # Remove the call to Libtool.
  if test "$libtool" = yes; then
    while test "X$1" != 'X--mode=compile'; do
      shift
    done
    shift
  fi
 
  # Remove `-o $object'.
  IFS=" "
  for arg
  do
    case $arg in
    -o)
      shift
      ;;
    $object)
      shift
      ;;
    *)
      set fnord "$@" "$arg"
      shift # fnord
      shift # $arg
      ;;
    esac
  done
 
  "$@" -E |
    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
    sed '$ s: \\$::' > "$tmpdepfile"
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  cat < "$tmpdepfile" >> "$depfile"
  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
msvisualcpp)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout.
  "$@" || exit $?
 
  # Remove the call to Libtool.
  if test "$libtool" = yes; then
    while test "X$1" != 'X--mode=compile'; do
      shift
    done
    shift
  fi
 
  IFS=" "
  for arg
  do
    case "$arg" in
    -o)
      shift
      ;;
    $object)
      shift
      ;;
    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
        set fnord "$@"
        shift
        shift
        ;;
    *)
        set fnord "$@" "$arg"
        shift
        shift
        ;;
    esac
  done
  "$@" -E 2>/dev/null |
  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
  echo "        " >> "$depfile"
  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
msvcmsys)
  # This case exists only to let depend.m4 do its work.  It works by
  # looking at the text of this script.  This case will never be run,
  # since it is checked for above.
  exit 1
  ;;
 
none)
  exec "$@"
  ;;
 
*)
  echo "Unknown depmode $depmode" 1>&2
  exit 1
  ;;
esac
 
exit 0
 
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

Line No.	Rev	Author	Line
1	19	jeremybenn	`#! /bin/sh`
2			`# depcomp - compile a program generating dependencies as side-effects`
3
4	82	jeremybenn	`scriptversion=2009-04-28.21; # UTC`
5	19	jeremybenn
6	82	jeremybenn	`# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free`
7			`# Software Foundation, Inc.`
8	19	jeremybenn
9			`# This program is free software; you can redistribute it and/or modify`
10			`# it under the terms of the GNU General Public License as published by`
11			`# the Free Software Foundation; either version 2, or (at your option)`
12			`# any later version.`
13
14			`# This program is distributed in the hope that it will be useful,`
15			`# but WITHOUT ANY WARRANTY; without even the implied warranty of`
16			`# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
17			`# GNU General Public License for more details.`
18
19			`# You should have received a copy of the GNU General Public License`
20	82	jeremybenn	`# along with this program. If not, see .`
21	19	jeremybenn
22			`# As a special exception to the GNU General Public License, if you`
23			`# distribute this file as part of a program that contains a`
24			`# configuration script generated by Autoconf, you may include it under`
25			`# the same distribution terms that you use for the rest of that program.`
26
27			`# Originally written by Alexandre Oliva .`
28
29			`case $1 in`
30			`'')`
31			echo "$0: No command. Try \`$0 --help' for more information." 1>&2
32			`exit 1;`
33			`;;`
34			`-h \| --h*)`
35			`cat <<\EOF`
36			`Usage: depcomp [--help] [--version] PROGRAM [ARGS]`
37
38			`Run PROGRAMS ARGS to compile a file, generating dependencies`
39			`as side-effects.`
40
41			`Environment variables:`
42			`depmode Dependency tracking mode.`
43			source Source file read by `PROGRAMS ARGS'.
44			object Object file output by `PROGRAMS ARGS'.
45			`DEPDIR directory where to store dependencies.`
46			`depfile Dependency file to output.`
47			`tmpdepfile Temporary file to use when outputing dependencies.`
48			`libtool Whether libtool is used (yes/no).`
49
50			`Report bugs to .`
51			`EOF`
52			`exit $?`
53			`;;`
54			`-v \| --v*)`
55			`echo "depcomp $scriptversion"`
56			`exit $?`
57			`;;`
58			`esac`
59
60			`if test -z "$depmode" \|\| test -z "$source" \|\| test -z "$object"; then`
61			`echo "depcomp: Variables source, object and depmode must be set" 1>&2`
62			`exit 1`
63			`fi`
64
65			`# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.`
66			depfile=${depfile-`echo "$object" \|
67			sed 's\|[^\\/]$\|'${DEPDIR-.deps}'/&\|;s\|\.\([^.]\)$\|.P\1\|;s\|Pobj$\|Po\|'`}
68			tmpdepfile=${tmpdepfile-`echo "$depfile" \| sed 's/\.\([^.]*\)$/.T\1/'`}
69
70			`rm -f "$tmpdepfile"`
71
72			`# Some modes work just like other modes, but use different flags. We`
73			`# parameterize here, but still list the modes in the big case below,`
74			`# to make depend.m4 easier to write. Note that we cannot use a case`
75			`# here, because this file can only contain one case statement.`
76			`if test "$depmode" = hp; then`
77			`# HP compiler uses -M and no extra arg.`
78			`gccflag=-M`
79			`depmode=gcc`
80			`fi`
81
82			`if test "$depmode" = dashXmstdout; then`
83			`# This is just like dashmstdout with a different argument.`
84			`dashmflag=-xM`
85			`depmode=dashmstdout`
86			`fi`
87
88	82	jeremybenn	`cygpath_u="cygpath -u -f -"`
89			`if test "$depmode" = msvcmsys; then`
90			`# This is just like msvisualcpp but w/o cygpath translation.`
91			`# Just convert the backslash-escaped backslashes to single forward`
92			`# slashes to satisfy depend.m4`
93			`cygpath_u="sed s,\\\\\\\\,/,g"`
94			`depmode=msvisualcpp`
95			`fi`
96
97	19	jeremybenn	`case "$depmode" in`
98			`gcc3)`
99			`## gcc 3 implements dependency tracking that does exactly what`
100			`## we want. Yay! Note: for some reason libtool 1.4 doesn't like`
101			`## it if -MD -MP comes after the -MF stuff. Hmm.`
102			`## Unfortunately, FreeBSD c89 acceptance of flags depends upon`
103			`## the command line argument order; so add the flags where they`
104			`## appear in depend2.am. Note that the slowdown incurred here`
105			`## affects only configure: in makefiles, %FASTDEP% shortcuts this.`
106			`for arg`
107			`do`
108			`case $arg in`
109			`-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;`
110			`*) set fnord "$@" "$arg" ;;`
111			`esac`
112			`shift # fnord`
113			`shift # $arg`
114			`done`
115			`"$@"`
116			`stat=$?`
117			`if test $stat -eq 0; then :`
118			`else`
119			`rm -f "$tmpdepfile"`
120			`exit $stat`
121			`fi`
122			`mv "$tmpdepfile" "$depfile"`
123			`;;`
124
125			`gcc)`
126			`## There are various ways to get dependency output from gcc. Here's`
127			`## why we pick this rather obscure method:`
128			`## - Don't want to use -MD because we'd like the dependencies to end`
129			`## up in a subdir. Having to rename by hand is ugly.`
130			`## (We might end up doing this anyway to support other compilers.)`
131			`## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like`
132			`## -MM, not -M (despite what the docs say).`
133			`## - Using -M directly means running the compiler twice (even worse`
134			`## than renaming).`
135			`if test -z "$gccflag"; then`
136			`gccflag=-MD,`
137			`fi`
138			`"$@" -Wp,"$gccflag$tmpdepfile"`
139			`stat=$?`
140			`if test $stat -eq 0; then :`
141			`else`
142			`rm -f "$tmpdepfile"`
143			`exit $stat`
144			`fi`
145			`rm -f "$depfile"`
146			`echo "$object : \\" > "$depfile"`
147			`alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz`
148			`## The second -e expression handles DOS-style file names with drive letters.`
149			`sed -e 's/^[^:]*: / /' \`
150			`-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"`
151			## This next piece of magic avoids the `deleted header file' problem.
152			`## The problem is that when a header file which appears in a .P file`
153			`## is deleted, the dependency causes make to die (because there is`
154			`## typically no way to rebuild the header). We avoid this by adding`
155			`## dummy dependencies for each header file. Too bad gcc doesn't do`
156			`## this for us directly.`
157			`tr ' ' '`
158			`' < "$tmpdepfile" \|`
159			## Some versions of gcc put a space before the `:'. On the theory
160			`## that the space means something, we add a space to the output as`
161			`## well.`
162			`## Some versions of the HPUX 10.20 sed can't process this invocation`
163			`## correctly. Breaking it into two sed invocations is a workaround.`
164			`sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"`
165			`rm -f "$tmpdepfile"`
166			`;;`
167
168			`hp)`
169			`# This case exists only to let depend.m4 do its work. It works by`
170			`# looking at the text of this script. This case will never be run,`
171			`# since it is checked for above.`
172			`exit 1`
173			`;;`
174
175			`sgi)`
176			`if test "$libtool" = yes; then`
177			`"$@" "-Wp,-MDupdate,$tmpdepfile"`
178			`else`
179			`"$@" -MDupdate "$tmpdepfile"`
180			`fi`
181			`stat=$?`
182			`if test $stat -eq 0; then :`
183			`else`
184			`rm -f "$tmpdepfile"`
185			`exit $stat`
186			`fi`
187			`rm -f "$depfile"`
188
189			`if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files`
190			`echo "$object : \\" > "$depfile"`
191
192			`# Clip off the initial element (the dependent). Don't try to be`
193			`# clever and replace this with sed code, as IRIX sed won't handle`
194			`# lines with more than a fixed number of characters (4096 in`
195			`# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;`
196			# the IRIX cc adds comments like `#:fec' to the end of the
197			`# dependency line.`
198			`tr ' ' '`
199			`' < "$tmpdepfile" \`
200			`\| sed -e 's/^.\.o://' -e 's/#.$//' -e '/^$/ d' \| \`
201			`tr '`
202	82	jeremybenn	`' ' ' >> "$depfile"`
203			`echo >> "$depfile"`
204	19	jeremybenn
205			`# The second pass generates a dummy entry for each header file.`
206			`tr ' ' '`
207			`' < "$tmpdepfile" \`
208			`\| sed -e 's/^.\.o://' -e 's/#.$//' -e '/^$/ d' -e 's/$/:/' \`
209	82	jeremybenn	`>> "$depfile"`
210	19	jeremybenn	`else`
211			`# The sourcefile does not contain any dependencies, so just`
212			`# store a dummy comment line, to avoid errors with the Makefile`
213			`# "include basename.Plo" scheme.`
214			`echo "#dummy" > "$depfile"`
215			`fi`
216			`rm -f "$tmpdepfile"`
217			`;;`
218
219			`aix)`
220			`# The C for AIX Compiler uses -M and outputs the dependencies`
221			`# in a .u file. In older versions, this file always lives in the`
222			# current directory. Also, the AIX compiler puts `$object:' at the
223			`# start of each line; $object doesn't have directory information.`
224			`# Version 6 uses the directory in both cases.`
225			dir=`echo "$object" \| sed -e 's\|/[^/]*$\|/\|'`
226			`test "x$dir" = "x$object" && dir=`
227			base=`echo "$object" \| sed -e 's\|^.*/\|\|' -e 's/\.o$//' -e 's/\.lo$//'`
228			`if test "$libtool" = yes; then`
229			`tmpdepfile1=$dir$base.u`
230			`tmpdepfile2=$base.u`
231			`tmpdepfile3=$dir.libs/$base.u`
232			`"$@" -Wc,-M`
233			`else`
234			`tmpdepfile1=$dir$base.u`
235			`tmpdepfile2=$dir$base.u`
236			`tmpdepfile3=$dir$base.u`
237			`"$@" -M`
238			`fi`
239			`stat=$?`
240
241			`if test $stat -eq 0; then :`
242			`else`
243			`rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"`
244			`exit $stat`
245			`fi`
246
247			`for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"`
248			`do`
249			`test -f "$tmpdepfile" && break`
250			`done`
251			`if test -f "$tmpdepfile"; then`
252			# Each line is of the form `foo.o: dependent.h'.
253			`# Do two passes, one to just change these to`
254			# `$object: dependent.h' and one to simply `dependent.h:'.
255			`sed -e "s,^.\.[a-z]:,$object:," < "$tmpdepfile" > "$depfile"`
256			`# That's a tab and a space in the [].`
257			`sed -e 's,^.\.[a-z]:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"`
258			`else`
259			`# The sourcefile does not contain any dependencies, so just`
260			`# store a dummy comment line, to avoid errors with the Makefile`
261			`# "include basename.Plo" scheme.`
262			`echo "#dummy" > "$depfile"`
263			`fi`
264			`rm -f "$tmpdepfile"`
265			`;;`
266
267			`icc)`
268			# Intel's C compiler understands `-MD -MF file'. However on
269			`# icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c`
270			`# ICC 7.0 will fill foo.d with something like`
271			`# foo.o: sub/foo.c`
272			`# foo.o: sub/foo.h`
273			`# which is wrong. We want:`
274			`# sub/foo.o: sub/foo.c`
275			`# sub/foo.o: sub/foo.h`
276			`# sub/foo.c:`
277			`# sub/foo.h:`
278			`# ICC 7.1 will output`
279			`# foo.o: sub/foo.c sub/foo.h`
280			`# and will wrap long lines using \ :`
281			`# foo.o: sub/foo.c ... \`
282			`# sub/foo.h ... \`
283			`# ...`
284
285			`"$@" -MD -MF "$tmpdepfile"`
286			`stat=$?`
287			`if test $stat -eq 0; then :`
288			`else`
289			`rm -f "$tmpdepfile"`
290			`exit $stat`
291			`fi`
292			`rm -f "$depfile"`
293			# Each line is of the form `foo.o: dependent.h',
294			# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
295			`# Do two passes, one to just change these to`
296			# `$object: dependent.h' and one to simply `dependent.h:'.
297			`sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"`
298			`# Some versions of the HPUX 10.20 sed can't process this invocation`
299			`# correctly. Breaking it into two sed invocations is a workaround.`
300			`sed 's,^[^:]: \(.\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \|`
301			`sed -e 's/$/ :/' >> "$depfile"`
302			`rm -f "$tmpdepfile"`
303			`;;`
304
305			`hp2)`
306			`# The "hp" stanza above does not work with aCC (C++) and HP's ia64`
307			`# compilers, which have integrated preprocessors. The correct option`
308			`# to use with these is +Maked; it writes dependencies to a file named`
309			`# 'foo.d', which lands next to the object file, wherever that`
310			`# happens to be.`
311			`# Much of this is similar to the tru64 case; see comments there.`
312			dir=`echo "$object" \| sed -e 's\|/[^/]*$\|/\|'`
313			`test "x$dir" = "x$object" && dir=`
314			base=`echo "$object" \| sed -e 's\|^.*/\|\|' -e 's/\.o$//' -e 's/\.lo$//'`
315			`if test "$libtool" = yes; then`
316			`tmpdepfile1=$dir$base.d`
317			`tmpdepfile2=$dir.libs/$base.d`
318			`"$@" -Wc,+Maked`
319			`else`
320			`tmpdepfile1=$dir$base.d`
321			`tmpdepfile2=$dir$base.d`
322			`"$@" +Maked`
323			`fi`
324			`stat=$?`
325			`if test $stat -eq 0; then :`
326			`else`
327			`rm -f "$tmpdepfile1" "$tmpdepfile2"`
328			`exit $stat`
329			`fi`
330
331			`for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"`
332			`do`
333			`test -f "$tmpdepfile" && break`
334			`done`
335			`if test -f "$tmpdepfile"; then`
336			`sed -e "s,^.\.[a-z]:,$object:," "$tmpdepfile" > "$depfile"`
337			# Add `dependent.h:' lines.
338	82	jeremybenn	`sed -ne '2,${`
339			`s/^ *//`
340			`s/ \\*$//`
341			`s/$/:/`
342			`p`
343			`}' "$tmpdepfile" >> "$depfile"`
344	19	jeremybenn	`else`
345			`echo "#dummy" > "$depfile"`
346			`fi`
347			`rm -f "$tmpdepfile" "$tmpdepfile2"`
348			`;;`
349
350			`tru64)`
351			`# The Tru64 compiler uses -MD to generate dependencies as a side`
352			# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
353			`# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put`
354			# dependencies in `foo.d' instead, so we check for that too.
355			`# Subdirectories are respected.`
356			dir=`echo "$object" \| sed -e 's\|/[^/]*$\|/\|'`
357			`test "x$dir" = "x$object" && dir=`
358			base=`echo "$object" \| sed -e 's\|^.*/\|\|' -e 's/\.o$//' -e 's/\.lo$//'`
359
360			`if test "$libtool" = yes; then`
361			`# With Tru64 cc, shared objects can also be used to make a`
362			`# static library. This mechanism is used in libtool 1.4 series to`
363			`# handle both shared and static libraries in a single compilation.`
364			`# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.`
365			`#`
366			`# With libtool 1.5 this exception was removed, and libtool now`
367			`# generates 2 separate objects for the 2 libraries. These two`
368			`# compilations output dependencies in $dir.libs/$base.o.d and`
369			`# in $dir$base.o.d. We have to check for both files, because`
370			`# one of the two compilations can be disabled. We should prefer`
371			`# $dir$base.o.d over $dir.libs/$base.o.d because the latter is`
372			`# automatically cleaned when .libs/ is deleted, while ignoring`
373			`# the former would cause a distcleancheck panic.`
374			`tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4`
375			`tmpdepfile2=$dir$base.o.d # libtool 1.5`
376			`tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5`
377			`tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504`
378			`"$@" -Wc,-MD`
379			`else`
380			`tmpdepfile1=$dir$base.o.d`
381			`tmpdepfile2=$dir$base.d`
382			`tmpdepfile3=$dir$base.d`
383			`tmpdepfile4=$dir$base.d`
384			`"$@" -MD`
385			`fi`
386
387			`stat=$?`
388			`if test $stat -eq 0; then :`
389			`else`
390			`rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"`
391			`exit $stat`
392			`fi`
393
394			`for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"`
395			`do`
396			`test -f "$tmpdepfile" && break`
397			`done`
398			`if test -f "$tmpdepfile"; then`
399			`sed -e "s,^.\.[a-z]:,$object:," < "$tmpdepfile" > "$depfile"`
400			`# That's a tab and a space in the [].`
401			`sed -e 's,^.\.[a-z]:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"`
402			`else`
403			`echo "#dummy" > "$depfile"`
404			`fi`
405			`rm -f "$tmpdepfile"`
406			`;;`
407
408			`#nosideeffect)`
409			`# This comment above is used by automake to tell side-effect`
410			`# dependency tracking mechanisms from slower ones.`
411
412			`dashmstdout)`
413			`# Important note: in order to support this mode, a compiler must`
414			`# always write the preprocessed file to stdout, regardless of -o.`
415			`"$@" \|\| exit $?`
416
417			`# Remove the call to Libtool.`
418			`if test "$libtool" = yes; then`
419	82	jeremybenn	`while test "X$1" != 'X--mode=compile'; do`
420	19	jeremybenn	`shift`
421			`done`
422			`shift`
423			`fi`
424
425			# Remove `-o $object'.
426			`IFS=" "`
427			`for arg`
428			`do`
429			`case $arg in`
430			`-o)`
431			`shift`
432			`;;`
433			`$object)`
434			`shift`
435			`;;`
436			`*)`
437			`set fnord "$@" "$arg"`
438			`shift # fnord`
439			`shift # $arg`
440			`;;`
441			`esac`
442			`done`
443
444			`test -z "$dashmflag" && dashmflag=-M`
445			# Require at least two characters before searching for `:'
446			`# in the target name. This is to cope with DOS-style filenames:`
447			# a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
448			`"$@" $dashmflag \|`
449			`sed 's:^[ ][^: ][^:][^:]\:[ ]*:'"$object"'\: :' > "$tmpdepfile"`
450			`rm -f "$depfile"`
451			`cat < "$tmpdepfile" > "$depfile"`
452			`tr ' ' '`
453			`' < "$tmpdepfile" \| \`
454			`## Some versions of the HPUX 10.20 sed can't process this invocation`
455			`## correctly. Breaking it into two sed invocations is a workaround.`
456			`sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"`
457			`rm -f "$tmpdepfile"`
458			`;;`
459
460			`dashXmstdout)`
461			`# This case only exists to satisfy depend.m4. It is never actually`
462			`# run, as this mode is specially recognized in the preamble.`
463			`exit 1`
464			`;;`
465
466			`makedepend)`
467			`"$@" \|\| exit $?`
468			`# Remove any Libtool call`
469			`if test "$libtool" = yes; then`
470	82	jeremybenn	`while test "X$1" != 'X--mode=compile'; do`
471	19	jeremybenn	`shift`
472			`done`
473			`shift`
474			`fi`
475			`# X makedepend`
476			`shift`
477	82	jeremybenn	`cleared=no eat=no`
478			`for arg`
479			`do`
480	19	jeremybenn	`case $cleared in`
481			`no)`
482			`set ""; shift`
483			`cleared=yes ;;`
484			`esac`
485	82	jeremybenn	`if test $eat = yes; then`
486			`eat=no`
487			`continue`
488			`fi`
489	19	jeremybenn	`case "$arg" in`
490			`-D\|-I)`
491			`set fnord "$@" "$arg"; shift ;;`
492			`# Strip any option that makedepend may not understand. Remove`
493			`# the object too, otherwise makedepend will parse it as a source file.`
494	82	jeremybenn	`-arch)`
495			`eat=yes ;;`
496	19	jeremybenn	`-*\|$object)`
497			`;;`
498			`*)`
499			`set fnord "$@" "$arg"; shift ;;`
500			`esac`

Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1ksim/] [depcomp] - Blame information for rev 294