URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1ksim/] [peripheral/] [atadevice.c] - Blame information for rev 146

Go to most recent revision | Details | Compare with Previous | View Log


/* atadevice.c -- ATA Device simulation. Simulates a harddisk, using a local
   streams.
 
   Copyright (C) 2002 Richard Herveille, rherveille@opencores.org
   Copyright (C) 2008 Embecosm Limited
 
   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
 
   This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 3 of the License, or (at your option)
   any later version.
 
   This program is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
 
   You should have received a copy of the GNU General Public License along
   with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
/* This program is commented throughout in a fashion suitable for processing
   with Doxygen. */
 
 
/* Autoconf and/or portability configuration */
#include "config.h"
#include "port.h"
 
/* System includes */
#ifdef __APPLE__
#include <libkern/OSByteOrder.h>
#define bswap_16(x) OSSwapInt16(x)
#define bswap_32(x) OSSwapInt32(x)
#define bswap_64(x) OSSwapInt64(x)
#else
#include <byteswap.h>
#endif
 
/* Package includes */
#include "atadevice.h"
#include "atadevice-cmdi.h"
#include "atacmd.h"
#include "abstract.h"
 
 
/*
 mandatory commands:
 - execute device diagnostics       (done)
 - flush cache
 - identify device                  (done)
 - initialize device parameters     (done)
 - read dma
 - read multiple
 - read sector(s)                   (done)
 - read verify sector(s)
 - seek
 - set features
 - set multiple mode
 - write dma
 - write multiple
 - write sector(s)
 
 
 optional commands:
 - download microcode
 - nop
 - read buffer
 - write buffer
 
 
 prohibited commands:
 - device reset
*/
 
 
/* Use a file to simulate a hard-disk                                 */
static FILE *
open_file (uint32_t * size, const char *filename)
{
  FILE *fp;
  unsigned long n;
 
  // TODO:
 
  /* check if a file with name 'filename' already exists             */
  if (!(fp = fopen (filename, "rb+")))
    if (!(fp = fopen (filename, "wb+")))
      {
        fprintf (stderr, "Warning: ata_open_file, cannot open hd-file %s\n",
                 filename);
        return NULL;
      }
    else
      {
        /* TODO create a file 'size' large */
        /* create a file 'size' large                                  */
        for (n = 0; n < *size; n++)
          fputc (0, fp);
      }
  else                          /* file already exist                                         */
    fprintf (stderr, "file %s already exists. Using existing file.\n",
             filename);
 
  /* get the size of the file. This is also the size of the harddisk */
  fseek (fp, 0, SEEK_END);
  *size = ftell (fp);
 
  return fp;
}
 
 
/* Use a the local filesystem as a hard-disk                          */
static FILE *
open_local (void)
{
  // TODO:
  fprintf (stderr, "Warning: Device type LOCAL is not yet supported: "
           "Defaulting to device type NO_CONNECT.");
  return NULL;
}
 
static void
ata_device_init (struct ata_device * device, int dev)
{
  /* set DeviceID                                                     */
  device->internals.dev = dev;
 
  /* generate stream for hd_simulation                                */
  switch (device->conf.type)
    {
    case TYPE_NO_CONNECT:
      device->conf.stream = NULL;
      break;
 
    case TYPE_FILE:
      device->conf.stream = open_file (&device->conf.size, device->conf.file);
      break;
 
    case TYPE_LOCAL:
      device->conf.stream = open_local ();
      break;
 
    default:
      fprintf (stderr, "Warning: Illegal device-type %d: "
               "Defaulting to type NO_CONNECT.\n", device->conf.type);
      device->conf.stream = NULL;
      break;
    }
 
  device->conf.size_sect = device->conf.size / BYTES_PER_SECTOR;
}
 
/*
  D E V I C E S _ I N I T
*/
void
ata_devices_init (struct ata_devices * devices)
{
  ata_device_init (&devices->device[0], 0);
 
  if (devices->device[0].conf.type)
    ata_device_init (&devices->device[1], ATA_DHR_DEV);
  else
    ata_device_init (&devices->device[1], 0);
}
 
/*
  D E V I C E S _ H W _ R E S E T
*/
static void
ata_device_hw_reset (struct ata_device * device, int reset_signal,
                     int daspo, int pdiagi, int daspi)
{
  /* check ata-device state                                         */
  if (device->internals.state == ATA_STATE_HW_RST)
    {
      if (!reset_signal)
        {
          /* hardware reset finished                                    */
 
          /* set sectors_per_track & heads_per_cylinders                */
          device->internals.sectors_per_track = device->conf.sectors;
          device->internals.heads_per_cylinder = device->conf.heads;
 
          /* set device1 input signals                                  */
          device->sigs.pdiagi = pdiagi;
          device->sigs.daspi = daspi;
 
          ata_execute_device_diagnostics_cmd (device);
 
          /* clear busy bit                                             */
          device->regs.status &= ~ATA_SR_BSY;
 
          /* set DRDY bit, when not a PACKET device                     */
          if (!device->conf.packet)
            device->regs.status |= ATA_SR_DRDY;
 
          /* set new state                                              */
          device->internals.state = ATA_STATE_IDLE;
        }
    }
  else if (reset_signal)
    {
      /* hardware reset signal asserted, stop what we are doing     */
 
      /* negate bus signals                                         */
      device->sigs.iordy = 0;
      device->sigs.intrq = 0;
      device->sigs.dmarq = 0;
      device->sigs.pdiago = 0;
      device->sigs.daspo = daspo;
 
      /* set busy bit                                               */
      device->regs.status |= ATA_SR_BSY;
 
      /* set new state                                              */
      device->internals.state = ATA_STATE_HW_RST;
    }
}
 
/* power-on and hardware reset                                        */
void
ata_devices_hw_reset (struct ata_devices * devices, int reset_signal)
{
  /* find device 0                                                    */
  if ((devices->device[0].conf.stream) && (devices->device[1].conf.stream))
    {
      /* this one is simple, device0 is device0                         */
 
      /* 1) handle device1 first                                        */
      ata_device_hw_reset (&devices->device[1], reset_signal, 1,        /* assert dasp, this is device1          */
                           0,    /* negate pdiag input, no more devices   */
                           0);   /* negate dasp input, no more devices    */
 
      /* 2) Then handle device0                                         */
      ata_device_hw_reset (&devices->device[0], reset_signal,
                           0,
                           devices->device[1].sigs.pdiago,
                           devices->device[1].sigs.daspo);
    }
  else if (devices->device[0].conf.stream)
    {
      /* device0 is device0, there's no device1                         */
      ata_device_hw_reset (&devices->device[0], reset_signal, 0,  /* negate dasp, this is device0          */
                           0,    /* negate pdiag input, there's no device1 */
                           0);   /* negate dasp input, there's no device1 */
    }
  else if (devices->device[1].conf.stream)
    {
      /* device1 is (logical) device0, there's no (physical) device0    */
      ata_device_hw_reset (&devices->device[1], reset_signal, 0, /* negate dasp, this is device0          */
                           0,    /* negate pdiag input, there's no device1 */
                           0);   /* negate dasp input, there's no device1 */
    }
}
 
 
/*
  D E V I C E S _ D O _ C O N T R O L _ R E G I S T E R
 
  Handles - software reset
          - Interrupt enable bit
*/
static void
ata_device_do_control_register (struct ata_device * device)
{
  /* TODO respond to new values of nIEN */
  /* if device not selected, respond to new values of nIEN & SRST */
 
  /* check if SRST bit is set                                         */
  if (device->regs.device_control & ATA_DCR_RST)
    {
      if (device->internals.state == ATA_STATE_IDLE)
        {                       /* start software reset                                       */
          /* negate bus signals                                         */
          device->sigs.pdiago = 0;
          device->sigs.intrq = 0;
          device->sigs.iordy = 0;
          device->sigs.dmarq = 0;
 
          /* set busy bit                                               */
          device->regs.status |= ATA_SR_BSY;
 
          /* set new state                                              */
          device->internals.state = ATA_STATE_SW_RST;
        }
    }
  else if (device->internals.state == ATA_STATE_SW_RST)
    {                           /* are we doing a software reset ??                             */
      /* SRST bit cleared, end of software reset                      */
 
      /*execute device diagnostics                                    */
      ata_execute_device_diagnostics_cmd (device);
 
      /* clear busy bit                                               */
      device->regs.status &= ~ATA_SR_BSY;
 
      /* set DRDY bit, when not a PACKET device                       */
      if (!device->conf.packet)
        device->regs.status |= ATA_SR_DRDY;
 
      /* set new state                                                */
      device->internals.state = ATA_STATE_IDLE;
    }
  /*
     <else> We are doing a hardware reset (or similar)
     ignore command
   */
}
 
 
/*
  D E V I C E S _ D O _ C O M M A N D _ R E G I S T E R
*/
static void
ata_device_do_command_register (struct ata_device * device)
{
  /* check BSY & DRQ                                                  */
  if ((device->regs.status & ATA_SR_BSY)
      || (device->regs.status & ATA_SR_DRQ))
    {
      if (device->regs.command != DEVICE_RESET)
        {
          fprintf (stderr, "Warning: ata_device_write, writing a command "
                   "while BSY or DRQ asserted.\n");
        }
    }
 
  /* check if device selected                                         */
  if ((device->regs.device_head & ATA_DHR_DEV) == device->internals.dev)
    ata_device_execute_cmd (device);
  else
    {
      /* if not selected, only respond to EXECUTE DEVICE DIAGNOSTICS  */
      if (device->regs.command == EXECUTE_DEVICE_DIAGNOSTICS)
        ata_device_execute_cmd (device);
    }
}
 
 
/*
  D E V I C E S _ R E A D
*/
/* Read from devices                                                  */
short
ata_devices_read (struct ata_devices * devices, char adr)
{
  struct ata_device *device;
 
  /* check for no connected devices                                 */
  if ((!devices->device[0].conf.stream) && (!devices->device[1].conf.stream))
    {
      fprintf (stderr, "Warning: ata_devices_read, no ata devices "
               "connected.\n");
    }
  else
    {
      /* check if both device0 and device1 are connected              */
      if ((devices->device[0].conf.stream)
          && (devices->device[1].conf.stream))
        {
          /* get the current active device                            */
          if (devices->device[1].regs.device_head & ATA_DHR_DEV)
            device = &devices->device[1];
          else
            device = &devices->device[0];
        }
      else
        {
          /* only one device connected                                */
          if (devices->device[1].conf.stream)
            device = &devices->device[1];
          else
            device = &devices->device[0];
        }
 
      /* return data provided by selected device                      */
      switch (adr)
        {
        case ATA_ASR:
          if ((device->regs.device_head & ATA_DHR_DEV) ==
              device->internals.dev)
            return device->regs.status;
          else
            {
              return 0;          // return 0 when device0 responds for device1
            }
 
        case ATA_CHR:
          return device->regs.cylinder_high;
 
        case ATA_CLR:
          return device->regs.cylinder_low;
 
        case ATA_DR:
          if (!(device->regs.status & ATA_SR_DRQ))
            {
              return 0;
            }
          else
            {
              uint16_t val = LE16 (*device->internals.dbuf_ptr++);
              if (!--device->internals.dbuf_cnt)
                {
                  device->regs.status &= ~ATA_SR_DRQ;
                  if (device->internals.end_t_func)
                    device->internals.end_t_func (device);
                }
              return val;
            }
 
        case ATA_DHR:
          return device->regs.device_head;
 
        case ATA_ERR:
          return device->regs.error;
 
        case ATA_SCR:
          return device->regs.sector_count;
 
        case ATA_SNR:
          return device->regs.sector_number;
 
        case ATA_SR:
          if ((device->regs.device_head & ATA_DHR_DEV) ==
              device->internals.dev)
            {
              device->sigs.intrq = 0;
              return device->regs.status;
            }
 
          return 0;              // return 0 when device0 responds for device1
 
//        case ATA_DA   :
//          return device -> regs.status;
        }
    }
  return 0;
}
 
 
/*
  D E V I C E S _ W R I T E
*/
/* write to a single device                                           */
static void
ata_device_write (struct ata_device * device, char adr, short value)
{
  switch (adr)
    {
    case ATA_CR:
      device->regs.command = value;
 
      /* check command register settings and execute command    */
      ata_device_do_command_register (device);
      break;
 
 
    case ATA_CHR:
      device->regs.cylinder_high = value;
      break;
 
    case ATA_CLR:
      device->regs.cylinder_low = value;
      break;
 
    case ATA_DR:
      if (!(device->regs.status & ATA_SR_DRQ))
        {
          break;
        }
      else
        {
          *device->internals.dbuf_ptr++ = LE16 (value);
          if (!--device->internals.dbuf_cnt)
            {
              device->regs.status &= ~ATA_SR_DRQ;
              if (device->internals.end_t_func)
                device->internals.end_t_func (device);
            }
        }
      device->regs.dataport_i = value;
      break;
 
    case ATA_DCR:
      device->regs.device_control = value;
      ata_device_do_control_register (device);
      break;
 
    case ATA_DHR:
      device->regs.device_head = value;
      break;
 
    case ATA_FR:
      device->regs.features = value;
      break;
 
    case ATA_SCR:
      device->regs.sector_count = value;
      break;
 
    case ATA_SNR:
      device->regs.sector_number = value;
      break;
 
    }                           //endcase
}
 
/* Write to devices                                                   */
void
ata_devices_write (struct ata_devices * devices, char adr, short value)
{
  /* check for no connected devices                                 */
  if (!devices->device[0].conf.stream && !devices->device[1].conf.stream)
    {
      fprintf (stderr, "Warning: ata_devices_write, no ata devices "
               "connected.\n");
    }
  else
    {
      /* first device                                                 */
      if (devices->device[0].conf.stream)
        ata_device_write (&devices->device[0], adr, value);
 
      /* second device                                                */
      if (devices->device[1].conf.stream)
        ata_device_write (&devices->device[1], adr, value);
    }
}

Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [or1ksim/] [peripheral/] [atadevice.c] - Blame information for rev 146

Line No.	Rev	Author	Line
1	19	jeremybenn	`/* atadevice.c -- ATA Device simulation. Simulates a harddisk, using a local`
2			`streams.`
3
4			`Copyright (C) 2002 Richard Herveille, rherveille@opencores.org`
5			`Copyright (C) 2008 Embecosm Limited`
6
7			`Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>`
8
9			`This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.`
10
11			`This program is free software; you can redistribute it and/or modify it`
12			`under the terms of the GNU General Public License as published by the Free`
13			`Software Foundation; either version 3 of the License, or (at your option)`
14			`any later version.`
15
16			`This program is distributed in the hope that it will be useful, but WITHOUT`
17			`ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or`
18			`FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for`
19			`more details.`
20
21			`You should have received a copy of the GNU General Public License along`
22			`with this program. If not, see <http://www.gnu.org/licenses/>. */`
23
24			`/* This program is commented throughout in a fashion suitable for processing`
25			`with Doxygen. */`
26
27
28			`/* Autoconf and/or portability configuration */`
29			`#include "config.h"`
30			`#include "port.h"`
31
32			`/* System includes */`
33	60	jeremybenn	`#ifdef __APPLE__`
34			`#include <libkern/OSByteOrder.h>`
35			`#define bswap_16(x) OSSwapInt16(x)`
36			`#define bswap_32(x) OSSwapInt32(x)`
37			`#define bswap_64(x) OSSwapInt64(x)`
38			`#else`
39	19	jeremybenn	`#include <byteswap.h>`
40	60	jeremybenn	`#endif`
41	19	jeremybenn
42			`/* Package includes */`
43			`#include "atadevice.h"`
44			`#include "atadevice-cmdi.h"`
45			`#include "atacmd.h"`
46			`#include "abstract.h"`
47
48
49			`/*`
50			`mandatory commands:`
51			`- execute device diagnostics (done)`
52			`- flush cache`
53			`- identify device (done)`
54			`- initialize device parameters (done)`
55			`- read dma`
56			`- read multiple`
57			`- read sector(s) (done)`
58			`- read verify sector(s)`
59			`- seek`
60			`- set features`
61			`- set multiple mode`
62			`- write dma`
63			`- write multiple`
64			`- write sector(s)`
65
66
67			`optional commands:`
68			`- download microcode`
69			`- nop`
70			`- read buffer`
71			`- write buffer`
72
73
74			`prohibited commands:`
75			`- device reset`
76			`*/`
77
78
79			`/* Use a file to simulate a hard-disk */`
80			`static FILE *`
81			`open_file (uint32_t * size, const char *filename)`
82			`{`
83			`FILE *fp;`
84			`unsigned long n;`
85
86			`// TODO:`
87
88			`/* check if a file with name 'filename' already exists */`
89			`if (!(fp = fopen (filename, "rb+")))`
90			`if (!(fp = fopen (filename, "wb+")))`
91			`{`
92			`fprintf (stderr, "Warning: ata_open_file, cannot open hd-file %s\n",`
93			`filename);`
94			`return NULL;`
95			`}`
96			`else`
97			`{`
98			`/* TODO create a file 'size' large */`
99			`/* create a file 'size' large */`
100			`for (n = 0; n < *size; n++)`
101			`fputc (0, fp);`
102			`}`
103			`else /* file already exist */`
104			`fprintf (stderr, "file %s already exists. Using existing file.\n",`
105			`filename);`
106
107			`/* get the size of the file. This is also the size of the harddisk */`
108			`fseek (fp, 0, SEEK_END);`
109			`*size = ftell (fp);`
110
111			`return fp;`
112			`}`
113
114
115			`/* Use a the local filesystem as a hard-disk */`
116			`static FILE *`
117			`open_local (void)`
118			`{`
119			`// TODO:`
120			`fprintf (stderr, "Warning: Device type LOCAL is not yet supported: "`
121			`"Defaulting to device type NO_CONNECT.");`
122			`return NULL;`
123			`}`
124
125			`static void`
126			`ata_device_init (struct ata_device * device, int dev)`
127			`{`
128			`/* set DeviceID */`
129			`device->internals.dev = dev;`
130
131			`/* generate stream for hd_simulation */`
132			`switch (device->conf.type)`
133			`{`
134			`case TYPE_NO_CONNECT:`
135			`device->conf.stream = NULL;`
136			`break;`
137
138			`case TYPE_FILE:`
139			`device->conf.stream = open_file (&device->conf.size, device->conf.file);`
140			`break;`
141
142			`case TYPE_LOCAL:`
143			`device->conf.stream = open_local ();`
144			`break;`
145
146			`default:`
147			`fprintf (stderr, "Warning: Illegal device-type %d: "`
148			`"Defaulting to type NO_CONNECT.\n", device->conf.type);`
149			`device->conf.stream = NULL;`
150			`break;`
151			`}`
152
153			`device->conf.size_sect = device->conf.size / BYTES_PER_SECTOR;`
154			`}`
155
156			`/*`
157			`D E V I C E S _ I N I T`
158			`*/`
159			`void`
160			`ata_devices_init (struct ata_devices * devices)`
161			`{`
162			`ata_device_init (&devices->device[0], 0);`
163
164			`if (devices->device[0].conf.type)`
165			`ata_device_init (&devices->device[1], ATA_DHR_DEV);`
166			`else`
167			`ata_device_init (&devices->device[1], 0);`
168			`}`
169
170			`/*`
171			`D E V I C E S _ H W _ R E S E T`
172			`*/`
173			`static void`
174			`ata_device_hw_reset (struct ata_device * device, int reset_signal,`
175			`int daspo, int pdiagi, int daspi)`
176			`{`
177			`/* check ata-device state */`
178			`if (device->internals.state == ATA_STATE_HW_RST)`
179			`{`
180			`if (!reset_signal)`
181			`{`
182			`/* hardware reset finished */`
183
184			`/* set sectors_per_track & heads_per_cylinders */`
185			`device->internals.sectors_per_track = device->conf.sectors;`
186			`device->internals.heads_per_cylinder = device->conf.heads;`
187
188			`/* set device1 input signals */`
189			`device->sigs.pdiagi = pdiagi;`
190			`device->sigs.daspi = daspi;`
191
192			`ata_execute_device_diagnostics_cmd (device);`
193
194			`/* clear busy bit */`
195			`device->regs.status &= ~ATA_SR_BSY;`
196
197			`/* set DRDY bit, when not a PACKET device */`
198			`if (!device->conf.packet)`
199			`device->regs.status \|= ATA_SR_DRDY;`
200
201			`/* set new state */`
202			`device->internals.state = ATA_STATE_IDLE;`
203			`}`
204			`}`
205			`else if (reset_signal)`
206			`{`
207			`/* hardware reset signal asserted, stop what we are doing */`
208
209			`/* negate bus signals */`
210			`device->sigs.iordy = 0;`
211			`device->sigs.intrq = 0;`
212			`device->sigs.dmarq = 0;`
213			`device->sigs.pdiago = 0;`
214			`device->sigs.daspo = daspo;`
215
216			`/* set busy bit */`
217			`device->regs.status \|= ATA_SR_BSY;`
218
219			`/* set new state */`
220			`device->internals.state = ATA_STATE_HW_RST;`
221			`}`
222			`}`
223
224			`/* power-on and hardware reset */`
225			`void`
226			`ata_devices_hw_reset (struct ata_devices * devices, int reset_signal)`
227			`{`
228			`/* find device 0 */`
229			`if ((devices->device[0].conf.stream) && (devices->device[1].conf.stream))`
230			`{`
231			`/* this one is simple, device0 is device0 */`
232
233			`/* 1) handle device1 first */`
234			`ata_device_hw_reset (&devices->device[1], reset_signal, 1, /* assert dasp, this is device1 */`
235			`0, /* negate pdiag input, no more devices */`
236			`0); /* negate dasp input, no more devices */`
237
238			`/* 2) Then handle device0 */`
239			`ata_device_hw_reset (&devices->device[0], reset_signal,`
240			`0,`
241			`devices->device[1].sigs.pdiago,`
242			`devices->device[1].sigs.daspo);`
243			`}`
244			`else if (devices->device[0].conf.stream)`
245			`{`
246			`/* device0 is device0, there's no device1 */`
247			`ata_device_hw_reset (&devices->device[0], reset_signal, 0, /* negate dasp, this is device0 */`
248			`0, /* negate pdiag input, there's no device1 */`
249			`0); /* negate dasp input, there's no device1 */`
250			`}`
251			`else if (devices->device[1].conf.stream)`
252			`{`
253			`/* device1 is (logical) device0, there's no (physical) device0 */`
254			`ata_device_hw_reset (&devices->device[1], reset_signal, 0, /* negate dasp, this is device0 */`
255			`0, /* negate pdiag input, there's no device1 */`
256			`0); /* negate dasp input, there's no device1 */`
257			`}`
258			`}`
259
260
261			`/*`
262			`D E V I C E S _ D O _ C O N T R O L _ R E G I S T E R`
263
264			`Handles - software reset`
265			`- Interrupt enable bit`
266			`*/`
267			`static void`
268			`ata_device_do_control_register (struct ata_device * device)`
269			`{`
270			`/* TODO respond to new values of nIEN */`
271			`/* if device not selected, respond to new values of nIEN & SRST */`
272
273			`/* check if SRST bit is set */`
274			`if (device->regs.device_control & ATA_DCR_RST)`
275			`{`
276			`if (device->internals.state == ATA_STATE_IDLE)`
277			`{ /* start software reset */`
278			`/* negate bus signals */`
279			`device->sigs.pdiago = 0;`
280			`device->sigs.intrq = 0;`
281			`device->sigs.iordy = 0;`
282			`device->sigs.dmarq = 0;`
283
284			`/* set busy bit */`
285			`device->regs.status \|= ATA_SR_BSY;`
286
287			`/* set new state */`
288			`device->internals.state = ATA_STATE_SW_RST;`
289			`}`
290			`}`
291			`else if (device->internals.state == ATA_STATE_SW_RST)`
292			`{ /* are we doing a software reset ?? */`
293			`/* SRST bit cleared, end of software reset */`
294
295			`/execute device diagnostics /`
296			`ata_execute_device_diagnostics_cmd (device);`
297
298			`/* clear busy bit */`
299			`device->regs.status &= ~ATA_SR_BSY;`
300
301			`/* set DRDY bit, when not a PACKET device */`
302			`if (!device->conf.packet)`
303			`device->regs.status \|= ATA_SR_DRDY;`
304
305			`/* set new state */`
306			`device->internals.state = ATA_STATE_IDLE;`
307			`}`
308			`/*`
309			`<else> We are doing a hardware reset (or similar)`
310			`ignore command`
311			`*/`
312			`}`
313
314
315			`/*`
316			`D E V I C E S _ D O _ C O M M A N D _ R E G I S T E R`
317			`*/`
318			`static void`
319			`ata_device_do_command_register (struct ata_device * device)`
320			`{`
321			`/* check BSY & DRQ */`
322			`if ((device->regs.status & ATA_SR_BSY)`
323			`\|\| (device->regs.status & ATA_SR_DRQ))`
324			`{`
325			`if (device->regs.command != DEVICE_RESET)`
326			`{`
327			`fprintf (stderr, "Warning: ata_device_write, writing a command "`
328			`"while BSY or DRQ asserted.\n");`
329			`}`
330			`}`
331
332			`/* check if device selected */`
333			`if ((device->regs.device_head & ATA_DHR_DEV) == device->internals.dev)`
334			`ata_device_execute_cmd (device);`
335			`else`
336			`{`
337			`/* if not selected, only respond to EXECUTE DEVICE DIAGNOSTICS */`
338			`if (device->regs.command == EXECUTE_DEVICE_DIAGNOSTICS)`
339			`ata_device_execute_cmd (device);`
340			`}`
341			`}`
342
343
344			`/*`
345			`D E V I C E S _ R E A D`
346			`*/`
347			`/* Read from devices */`
348			`short`
349			`ata_devices_read (struct ata_devices * devices, char adr)`
350			`{`
351			`struct ata_device *device;`
352
353			`/* check for no connected devices */`
354			`if ((!devices->device[0].conf.stream) && (!devices->device[1].conf.stream))`
355			`{`
356			`fprintf (stderr, "Warning: ata_devices_read, no ata devices "`
357			`"connected.\n");`
358			`}`
359			`else`
360			`{`
361			`/* check if both device0 and device1 are connected */`
362			`if ((devices->device[0].conf.stream)`
363			`&& (devices->device[1].conf.stream))`
364			`{`
365			`/* get the current active device */`
366			`if (devices->device[1].regs.device_head & ATA_DHR_DEV)`
367			`device = &devices->device[1];`
368			`else`
369			`device = &devices->device[0];`
370			`}`
371			`else`
372			`{`
373			`/* only one device connected */`
374			`if (devices->device[1].conf.stream)`
375			`device = &devices->device[1];`
376			`else`
377			`device = &devices->device[0];`
378			`}`
379
380			`/* return data provided by selected device */`
381			`switch (adr)`
382			`{`
383			`case ATA_ASR:`
384			`if ((device->regs.device_head & ATA_DHR_DEV) ==`
385			`device->internals.dev)`
386			`return device->regs.status;`
387			`else`
388			`{`
389			`return 0; // return 0 when device0 responds for device1`
390			`}`
391
392			`case ATA_CHR:`
393			`return device->regs.cylinder_high;`
394
395			`case ATA_CLR:`
396			`return device->regs.cylinder_low;`
397
398			`case ATA_DR:`
399	82	jeremybenn	`if (!(device->regs.status & ATA_SR_DRQ))`
400	19	jeremybenn	`{`
401			`return 0;`
402			`}`
403			`else`
404			`{`
405			`uint16_t val = LE16 (*device->internals.dbuf_ptr++);`
406			`if (!--device->internals.dbuf_cnt)`
407			`{`
408			`device->regs.status &= ~ATA_SR_DRQ;`
409			`if (device->internals.end_t_func)`
410			`device->internals.end_t_func (device);`
411			`}`
412			`return val;`
413			`}`
414
415			`case ATA_DHR:`
416			`return device->regs.device_head;`
417
418			`case ATA_ERR:`
419			`return device->regs.error;`
420
421			`case ATA_SCR:`
422			`return device->regs.sector_count;`
423
424			`case ATA_SNR:`
425			`return device->regs.sector_number;`
426
427			`case ATA_SR:`
428			`if ((device->regs.device_head & ATA_DHR_DEV) ==`
429			`device->internals.dev)`
430			`{`
431			`device->sigs.intrq = 0;`
432			`return device->regs.status;`
433			`}`
434
435			`return 0; // return 0 when device0 responds for device1`
436
437			`// case ATA_DA :`
438			`// return device -> regs.status;`
439			`}`
440			`}`
441			`return 0;`
442			`}`
443
444
445			`/*`
446			`D E V I C E S _ W R I T E`
447			`*/`
448			`/* write to a single device */`
449			`static void`
450			`ata_device_write (struct ata_device * device, char adr, short value)`
451			`{`
452			`switch (adr)`
453			`{`
454			`case ATA_CR:`
455			`device->regs.command = value;`
456
457			`/* check command register settings and execute command */`
458			`ata_device_do_command_register (device);`
459			`break;`
460
461
462			`case ATA_CHR:`
463			`device->regs.cylinder_high = value;`
464			`break;`
465
466			`case ATA_CLR:`
467			`device->regs.cylinder_low = value;`
468			`break;`
469
470			`case ATA_DR:`
471	82	jeremybenn	`if (!(device->regs.status & ATA_SR_DRQ))`
472	19	jeremybenn	`{`
473			`break;`
474			`}`
475			`else`
476			`{`
477			`*device->internals.dbuf_ptr++ = LE16 (value);`
478			`if (!--device->internals.dbuf_cnt)`
479			`{`
480			`device->regs.status &= ~ATA_SR_DRQ;`
481			`if (device->internals.end_t_func)`
482			`device->internals.end_t_func (device);`
483			`}`
484			`}`
485			`device->regs.dataport_i = value;`
486			`break;`
487
488			`case ATA_DCR:`
489			`device->regs.device_control = value;`
490			`ata_device_do_control_register (device);`
491			`break;`
492
493			`case ATA_DHR:`
494			`device->regs.device_head = value;`
495			`break;`
496
497			`case ATA_FR:`
498			`device->regs.features = value;`
499			`break;`
500
501			`case ATA_SCR:`
502			`device->regs.sector_count = value;`
503			`break;`
504
505			`case ATA_SNR:`
506			`device->regs.sector_number = value;`
507			`break;`
508
509			`} //endcase`
510			`}`
511
512			`/* Write to devices */`
513			`void`
514			`ata_devices_write (struct ata_devices * devices, char adr, short value)`
515			`{`
516			`/* check for no connected devices */`
517			`if (!devices->device[0].conf.stream && !devices->device[1].conf.stream)`
518			`{`
519			`fprintf (stderr, "Warning: ata_devices_write, no ata devices "`
520			`"connected.\n");`
521			`}`
522			`else`
523			`{`
524			`/* first device */`
525			`if (devices->device[0].conf.stream)`
526			`ata_device_write (&devices->device[0], adr, value);`
527
528			`/* second device */`
529			`if (devices->device[1].conf.stream)`
530			`ata_device_write (&devices->device[1], adr, value);`
531			`}`
532			`}`