URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1ksim/] [peripheral/] [eth.c] - Blame information for rev 74

Go to most recent revision | Details | Compare with Previous | View Log

/* ethernet.c -- Simulation of Ethernet MAC
 
   Copyright (C) 2001 by Erez Volk, erez@opencores.org
                         Ivan Guzvinec, ivang@opencores.org
   Copyright (C) 2008 Embecosm Limited
 
   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
 
   This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 3 of the License, or (at your option)
   any later version.
 
   This program is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
 
   You should have received a copy of the GNU General Public License along
   with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
/* This program is commented throughout in a fashion suitable for processing
   with Doxygen. */
 
 
/* Autoconf and/or portability configuration */
#include "config.h"
#include "port.h"
 
/* System includes */
#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/poll.h>
#include <sys/time.h>
#include <unistd.h>
#include <errno.h>
#include <netinet/in.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <net/if.h>
 
#if HAVE_ETH_PHY
#include <netpacket/packet.h>
#endif /* HAVE_ETH_PHY */
 
#if HAVE_NET_ETHERNET_H
# include <net/ethernet.h>
#elif defined(HAVE_SYS_ETHERNET_H)
# include <sys/ethernet.h>
#else /* !HAVE_NET_ETHERNET_H && !HAVE_SYS_ETHERNET_H - */
#include <sys/types.h>
#endif
 
/* Package includes */
#include "arch.h"
#include "config.h"
#include "abstract.h"
#include "eth.h"
#include "dma.h"
#include "sim-config.h"
#include "fields.h"
#include "crc32.h"
#include "vapi.h"
#include "pic.h"
#include "sched.h"
#include "toplevel-support.h"
#include "sim-cmd.h"
 
/* Address space required by one Ethernet MAC */
#define ETH_ADDR_SPACE 0x1000
 
/* Relative Register Addresses */
#define ETH_MODER       (4 * 0x00)
#define ETH_INT_SOURCE  (4 * 0x01)
#define ETH_INT_MASK    (4 * 0x02)
#define ETH_IPGT        (4 * 0x03)
#define ETH_IPGR1       (4 * 0x04)
#define ETH_IPGR2       (4 * 0x05)
#define ETH_PACKETLEN   (4 * 0x06)
#define ETH_COLLCONF    (4 * 0x07)
#define ETH_TX_BD_NUM   (4 * 0x08)
#define ETH_CTRLMODER   (4 * 0x09)
#define ETH_MIIMODER    (4 * 0x0A)
#define ETH_MIICOMMAND  (4 * 0x0B)
#define ETH_MIIADDRESS  (4 * 0x0C)
#define ETH_MIITX_DATA  (4 * 0x0D)
#define ETH_MIIRX_DATA  (4 * 0x0E)
#define ETH_MIISTATUS   (4 * 0x0F)
#define ETH_MAC_ADDR0   (4 * 0x10)
#define ETH_MAC_ADDR1   (4 * 0x11)
#define ETH_HASH0       (4 * 0x12)
#define ETH_HASH1       (4 * 0x13)
 
/* Where BD's are stored */
#define ETH_BD_BASE        0x400
#define ETH_BD_COUNT       0x100
#define ETH_BD_SPACE       (4 * ETH_BD_COUNT)
 
/* Where to point DMA to transmit/receive */
#define ETH_DMA_RX_TX      0x800
 
/* Field definitions for MODER */
#define ETH_MODER_DMAEN_OFFSET     17
#define ETH_MODER_RECSMALL_OFFSET  16
#define ETH_MODER_PAD_OFFSET       15
#define ETH_MODER_HUGEN_OFFSET     14
#define ETH_MODER_CRCEN_OFFSET     13
#define ETH_MODER_DLYCRCEN_OFFSET  12
#define ETH_MODER_RST_OFFSET       11
#define ETH_MODER_FULLD_OFFSET     10
#define ETH_MODER_EXDFREN_OFFSET   9
#define ETH_MODER_NOBCKOF_OFFSET   8
#define ETH_MODER_LOOPBCK_OFFSET   7
#define ETH_MODER_IFG_OFFSET       6
#define ETH_MODER_PRO_OFFSET       5
#define ETH_MODER_IAM_OFFSET       4
#define ETH_MODER_BRO_OFFSET       3
#define ETH_MODER_NOPRE_OFFSET     2
#define ETH_MODER_TXEN_OFFSET      1
#define ETH_MODER_RXEN_OFFSET      0
 
/* Field definitions for INT_SOURCE */
#define ETH_INT_SOURCE_RXC_OFFSET  6
#define ETH_INT_SOURCE_TXC_OFFSET  5
#define ETH_INT_SOURCE_BUSY_OFFSET 4
#define ETH_INT_SOURCE_RXE_OFFSET  3
#define ETH_INT_SOURCE_RXB_OFFSET  2
#define ETH_INT_SOURCE_TXE_OFFSET  1
#define ETH_INT_SOURCE_TXB_OFFSET  0
 
/* Field definitions for INT_MASK */
#define ETH_INT_MASK_RXC_M_OFFSET  6
#define ETH_INT_MASK_TXC_M_OFFSET  5
#define ETH_INT_MASK_BUSY_M_OFFSET 4
#define ETH_INT_MASK_RXE_M_OFFSET  3
#define ETH_INT_MASK_RXB_M_OFFSET  2
#define ETH_INT_MASK_TXE_M_OFFSET  1
#define ETH_INT_MASK_TXB_M_OFFSET  0
 
/* Field definitions for PACKETLEN */
#define ETH_PACKETLEN_MINFL_OFFSET 16
#define ETH_PACKETLEN_MINFL_WIDTH  16
#define ETH_PACKETLEN_MAXFL_OFFSET 0
#define ETH_PACKETLEN_MAXFL_WIDTH  16
 
/* Field definitions for COLLCONF */
#define ETH_COLLCONF_MAXRET_OFFSET 16
#define ETH_COLLCONF_MAXRET_WIDTH  4
#define ETH_COLLCONF_COLLVALID_OFFSET 0
#define ETH_COLLCONF_COLLVALID_WIDTH  6
 
/* Field definitions for CTRLMODER */
#define ETH_CMODER_TXFLOW_OFFSET   2
#define ETH_CMODER_RXFLOW_OFFSET   1
#define ETH_CMODER_PASSALL_OFFSET  0
 
/* Field definitions for MIIMODER */
#define ETH_MIIMODER_MRST_OFFSET   9
#define ETH_MIIMODER_NOPRE_OFFSET  8
#define ETH_MIIMODER_CLKDIV_OFFSET 0
#define ETH_MIIMODER_CLKDIV_WIDTH  8
 
/* Field definitions for MIICOMMAND */
#define ETH_MIICOMM_WCDATA_OFFSET  2
#define ETH_MIICOMM_RSTAT_OFFSET   1
#define ETH_MIICOMM_SCANS_OFFSET   0
 
/* Field definitions for MIIADDRESS */
#define ETH_MIIADDR_RGAD_OFFSET    8
#define ETH_MIIADDR_RGAD_WIDTH     5
#define ETH_MIIADDR_FIAD_OFFSET    0
#define ETH_MIIADDR_FIAD_WIDTH     5
 
/* Field definitions for MIISTATUS */
#define ETH_MIISTAT_NVALID_OFFSET  1
#define ETH_MIISTAT_BUSY_OFFSET    1
#define ETH_MIISTAT_FAIL_OFFSET    0
 
/* Field definitions for TX buffer descriptors */
#define ETH_TX_BD_LENGTH_OFFSET        16
#define ETH_TX_BD_LENGTH_WIDTH         16
#define ETH_TX_BD_READY_OFFSET         15
#define ETH_TX_BD_IRQ_OFFSET           14
#define ETH_TX_BD_WRAP_OFFSET          13
#define ETH_TX_BD_PAD_OFFSET           12
#define ETH_TX_BD_CRC_OFFSET           11
#define ETH_TX_BD_LAST_OFFSET          10
#define ETH_TX_BD_PAUSE_OFFSET         9
#define ETH_TX_BD_UNDERRUN_OFFSET      8
#define ETH_TX_BD_RETRY_OFFSET         4
#define ETH_TX_BD_RETRY_WIDTH          4
#define ETH_TX_BD_RETRANSMIT_OFFSET    3
#define ETH_TX_BD_COLLISION_OFFSET     2
#define ETH_TX_BD_DEFER_OFFSET         1
#define ETH_TX_BD_NO_CARRIER_OFFSET    0
 
 
/* Field definitions for RX buffer descriptors */
#define ETH_RX_BD_LENGTH_OFFSET        16
#define ETH_RX_BD_LENGTH_WIDTH         16
#define ETH_RX_BD_READY_OFFSET         15
#define ETH_RX_BD_IRQ_OFFSET           14
#define ETH_RX_BD_WRAP_OFFSET          13
#define ETH_RX_BD_MISS_OFFSET          7
#define ETH_RX_BD_UVERRUN_OFFSET       6
#define ETH_RX_BD_INVALID_OFFSET       5
#define ETH_RX_BD_DRIBBLE_OFFSET       4
#define ETH_RX_BD_TOOBIG_OFFSET        3
#define ETH_RX_BD_TOOSHORT_OFFSET      2
#define ETH_RX_BD_CRC_OFFSET           1
#define ETH_RX_BD_COLLISION_OFFSET     0
 
/*
 * Ethernet protocol definitions
 */
#ifdef HAVE_NET_ETHERNET_H
#elif defined(HAVE_SYS_ETHERNET_H)
#ifndef ETHER_ADDR_LEN
#define ETHER_ADDR_LEN ETHERADDRL
#endif
#ifndef ETHER_HDR_LEN
#define ETHER_HDR_LEN sizeof(struct ether_header)
#endif
#else /* !HAVE_NET_ETHERNET_H && !HAVE_SYS_ETHERNET_H - */
#ifdef __CYGWIN__
/* define some missing cygwin defines.
 *
 * NOTE! there is no nonblocking socket option implemented in cygwin.dll
 *       so defining MSG_DONTWAIT is just (temporary) workaround !!!
 */
#define MSG_DONTWAIT  0x40
#define ETH_HLEN      14
#endif /* __CYGWIN__ */
 
#define ETH_ALEN    6
 
struct ether_addr
{
  u_int8_t ether_addr_octet[ETH_ALEN];
};
 
struct ether_header
{
  u_int8_t ether_dhost[ETH_ALEN];       /* destination eth addr */
  u_int8_t ether_shost[ETH_ALEN];       /* source ether addr    */
  u_int16_t ether_type;         /* packet type ID field */
};
 
/* Ethernet protocol ID's */
#define ETHERTYPE_PUP           0x0200  /* Xerox PUP */
#define ETHERTYPE_IP            0x0800  /* IP */
#define ETHERTYPE_ARP           0x0806  /* Address resolution */
#define ETHERTYPE_REVARP        0x8035  /* Reverse ARP */
 
#define ETHER_ADDR_LEN  ETH_ALEN        /* size of ethernet addr */
#define ETHER_TYPE_LEN  2       /* bytes in type field */
#define ETHER_CRC_LEN   4       /* bytes in CRC field */
#define ETHER_HDR_LEN   ETH_HLEN        /* total octets in header */
#define ETHER_MIN_LEN   (ETH_ZLEN + ETHER_CRC_LEN)      /* min packet length */
#define ETHER_MAX_LEN   (ETH_FRAME_LEN + ETHER_CRC_LEN) /* max packet length */
 
/* make sure ethenet length is valid */
#define ETHER_IS_VALID_LEN(foo) \
        ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
 
/*
 * The ETHERTYPE_NTRAILER packet types starting at ETHERTYPE_TRAIL have
 * (type-ETHERTYPE_TRAIL)*512 bytes of data followed
 * by an ETHER type (as given above) and then the (variable-length) header.
 */
#define ETHERTYPE_TRAIL         0x1000  /* Trailer packet */
#define ETHERTYPE_NTRAILER      16
 
#define ETHERMTU        ETH_DATA_LEN
#define ETHERMIN        (ETHER_MIN_LEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
 
#endif /* HAVE_NET_ETHERNET_H */
 
/*
 * Implementatino of Ethernet MAC Registers and State
 */
#define ETH_TXSTATE_IDLE        0
#define ETH_TXSTATE_WAIT4BD     10
#define ETH_TXSTATE_READFIFO    20
#define ETH_TXSTATE_TRANSMIT    30
 
#define ETH_RXSTATE_IDLE        0
#define ETH_RXSTATE_WAIT4BD     10
#define ETH_RXSTATE_RECV        20
#define ETH_RXSTATE_WRITEFIFO   30
 
#define ETH_RTX_FILE    0
#define ETH_RTX_SOCK    1
#define ETH_RTX_VAPI    2
 
#define ETH_MAXPL   0x10000
 
enum
{ ETH_VAPI_DATA = 0,
  ETH_VAPI_CTRL,
  ETH_NUM_VAPI_IDS
};
 
struct eth_device
{
  /* Is peripheral enabled */
  int enabled;
 
  /* Base address in memory */
  oraddr_t baseaddr;
 
  /* Which DMA controller is this MAC connected to */
  unsigned dma;
  unsigned tx_channel;
  unsigned rx_channel;
 
  /* Our address */
  unsigned char mac_address[ETHER_ADDR_LEN];
 
  /* interrupt line */
  unsigned long mac_int;
 
  /* VAPI ID */
  unsigned long base_vapi_id;
 
  /* RX and TX file names and handles */
  char *rxfile, *txfile;
  int txfd;
  int rxfd;
  off_t loopback_offset;
 
  /* Socket interface name */
  char *sockif;
 
  int rtx_sock;
  int rtx_type;
  struct ifreq ifr;
  fd_set rfds, wfds;
 
  /* Current TX state */
  struct
  {
    unsigned long state;
    unsigned long bd_index;
    unsigned long bd;
    unsigned long bd_addr;
    unsigned working, waiting_for_dma, error;
    long packet_length;
    unsigned minimum_length, maximum_length;
    unsigned add_crc;
    unsigned crc_dly;
    unsigned long crc_value;
    long bytes_left, bytes_sent;
  } tx;
 
  /* Current RX state */
  struct
  {
    unsigned long state;
    unsigned long bd_index;
    unsigned long bd;
    unsigned long bd_addr;
    int fd;
    off_t *offset;
    unsigned working, error, waiting_for_dma;
    long packet_length, bytes_read, bytes_left;
  } rx;
 
  /* Visible registers */
  struct
  {
    unsigned long moder;
    unsigned long int_source;
    unsigned long int_mask;
    unsigned long ipgt;
    unsigned long ipgr1;
    unsigned long ipgr2;
    unsigned long packetlen;
    unsigned long collconf;
    unsigned long tx_bd_num;
    unsigned long controlmoder;
    unsigned long miimoder;
    unsigned long miicommand;
    unsigned long miiaddress;
    unsigned long miitx_data;
    unsigned long miirx_data;
    unsigned long miistatus;
    unsigned long hash0;
    unsigned long hash1;
 
    /* Buffer descriptors */
    unsigned long bd_ram[ETH_BD_SPACE / 4];
  } regs;
 
  unsigned char rx_buff[ETH_MAXPL];
  unsigned char tx_buff[ETH_MAXPL];
  unsigned char lo_buff[ETH_MAXPL];
};
 
 
/* simulator interface */
static void eth_vapi_read (unsigned long id, unsigned long data, void *dat);
/* register interface */
static void eth_write32 (oraddr_t addr, uint32_t value, void *dat);
static uint32_t eth_read32 (oraddr_t addr, void *dat);
/* clock */
static void eth_controller_tx_clock (void *);
static void eth_controller_rx_clock (void *);
/* utility functions */
static ssize_t eth_read_rx_file (struct eth_device *, void *, size_t);
static void eth_skip_rx_file (struct eth_device *, off_t);
static void eth_rx_next_packet (struct eth_device *);
static void eth_write_tx_bd_num (struct eth_device *, unsigned long value);
/* ========================================================================= */
/*  TX LOGIC                                                                 */
/*---------------------------------------------------------------------------*/
 
/*
 * TX clock
 * Responsible for starting and finishing TX
 */
static void
eth_controller_tx_clock (void *dat)
{
  struct eth_device *eth = dat;
  int bAdvance = 1;
#if HAVE_ETH_PHY
  struct sockaddr_ll sll;
#endif /* HAVE_ETH_PHY */
  long nwritten = 0;
  unsigned long read_word;
 
  switch (eth->tx.state)
    {
    case ETH_TXSTATE_IDLE:
      eth->tx.state = ETH_TXSTATE_WAIT4BD;
      break;
    case ETH_TXSTATE_WAIT4BD:
      /* Read buffer descriptor */
      eth->tx.bd = eth->regs.bd_ram[eth->tx.bd_index];
      eth->tx.bd_addr = eth->regs.bd_ram[eth->tx.bd_index + 1];
 
      if (TEST_FLAG (eth->tx.bd, ETH_TX_BD, READY))
        {
            /*****************/
          /* initialize TX */
          eth->tx.bytes_left = eth->tx.packet_length =
            GET_FIELD (eth->tx.bd, ETH_TX_BD, LENGTH);
          eth->tx.bytes_sent = 0;
 
          /*   Initialize error status bits */
          CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, DEFER);
          CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, COLLISION);
          CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, RETRANSMIT);
          CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, UNDERRUN);
          CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, NO_CARRIER);
          SET_FIELD (eth->tx.bd, ETH_TX_BD, RETRY, 0);
 
          /* Find out minimum length */
          if (TEST_FLAG (eth->tx.bd, ETH_TX_BD, PAD) ||
              TEST_FLAG (eth->regs.moder, ETH_MODER, PAD))
            eth->tx.minimum_length =
              GET_FIELD (eth->regs.packetlen, ETH_PACKETLEN, MINFL);
          else
            eth->tx.minimum_length = eth->tx.packet_length;
 
          /* Find out maximum length */
          if (TEST_FLAG (eth->regs.moder, ETH_MODER, HUGEN))
            eth->tx.maximum_length = eth->tx.packet_length;
          else
            eth->tx.maximum_length =
              GET_FIELD (eth->regs.packetlen, ETH_PACKETLEN, MAXFL);
 
          /* Do we need CRC on this packet? */
          if (TEST_FLAG (eth->regs.moder, ETH_MODER, CRCEN) ||
              (TEST_FLAG (eth->tx.bd, ETH_TX_BD, CRC) &&
               TEST_FLAG (eth->tx.bd, ETH_TX_BD, LAST)))
            eth->tx.add_crc = 1;
          else
            eth->tx.add_crc = 0;
 
          if (TEST_FLAG (eth->regs.moder, ETH_MODER, DLYCRCEN))
            eth->tx.crc_dly = 1;
          else
            eth->tx.crc_dly = 0;
          /* XXX - For now we skip CRC calculation */
 
          if (eth->rtx_type == ETH_RTX_FILE)
            {
              /* write packet length to file */
              nwritten =
                write (eth->txfd, &(eth->tx.packet_length),
                       sizeof (eth->tx.packet_length));
            }
 
            /************************************************/
          /* start transmit with reading packet into FIFO */
          eth->tx.state = ETH_TXSTATE_READFIFO;
        }
 
      /* stay in this state if (TXEN && !READY) */
      break;
    case ETH_TXSTATE_READFIFO:
#if 1
      if (eth->tx.bytes_sent < eth->tx.packet_length)
        {
          read_word =
            eval_direct32 (eth->tx.bytes_sent + eth->tx.bd_addr, 0, 0);
          eth->tx_buff[eth->tx.bytes_sent] =
            (unsigned char) (read_word >> 24);
          eth->tx_buff[eth->tx.bytes_sent + 1] =
            (unsigned char) (read_word >> 16);
          eth->tx_buff[eth->tx.bytes_sent + 2] =
            (unsigned char) (read_word >> 8);
          eth->tx_buff[eth->tx.bytes_sent + 3] = (unsigned char) (read_word);
          eth->tx.bytes_sent += 4;
        }
#else
      if (eth->tx.bytes_sent < eth->tx.packet_length)
        {
          eth->tx_buff[eth->tx.bytes_sent] =
            eval_direct8 (eth->tx.bytes_sent + eth->tx.bd_addr, 0, 0);
          eth->tx.bytes_sent += 1;
        }
#endif
      else
        {
          eth->tx.state = ETH_TXSTATE_TRANSMIT;
        }
      break;
    case ETH_TXSTATE_TRANSMIT:
      /* send packet */
      switch (eth->rtx_type)
        {
        case ETH_RTX_FILE:
          nwritten = write (eth->txfd, eth->tx_buff, eth->tx.packet_length);
          break;
#if HAVE_ETH_PHY
        case ETH_RTX_SOCK:
          memset (&sll, 0, sizeof (sll));
          sll.sll_ifindex = eth->ifr.ifr_ifindex;
          nwritten =
            sendto (eth->rtx_sock, eth->tx_buff, eth->tx.packet_length, 0,
                    (struct sockaddr *) &sll, sizeof (sll));
#endif /* HAVE_ETH_PHY */
        }
 
      /* set BD status */
      if (nwritten == eth->tx.packet_length)
        {
          CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, READY);
          SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXB);
 
          eth->tx.state = ETH_TXSTATE_WAIT4BD;
        }
      else
        {
          /* XXX - implement retry mechanism here! */
          CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, READY);
          CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, COLLISION);
          SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXE);
 
          eth->tx.state = ETH_TXSTATE_WAIT4BD;
        }
 
      eth->regs.bd_ram[eth->tx.bd_index] = eth->tx.bd;
 
      /* generate OK interrupt */
      if (TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, TXE_M) ||
          TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, TXB_M))
        {
          if (TEST_FLAG (eth->tx.bd, ETH_TX_BD, IRQ))
            report_interrupt (eth->mac_int);
        }
 
      /* advance to next BD */
      if (bAdvance)
        {
          if (TEST_FLAG (eth->tx.bd, ETH_TX_BD, WRAP) ||
              eth->tx.bd_index >= ETH_BD_COUNT)
            eth->tx.bd_index = 0;
          else
            eth->tx.bd_index += 2;
        }
 
      break;
    }
 
  /* Reschedule */
  SCHED_ADD (eth_controller_tx_clock, dat, 1);
}
 
/* ========================================================================= */
 
 
/* ========================================================================= */
/*  RX LOGIC                                                                 */
/*---------------------------------------------------------------------------*/
 
/*
 * RX clock
 * Responsible for starting and finishing RX
 */
static void
eth_controller_rx_clock (void *dat)
{
  struct eth_device *eth = dat;
  long nread;
  unsigned long send_word;
 
 
  switch (eth->rx.state)
    {
    case ETH_RXSTATE_IDLE:
      eth->rx.state = ETH_RXSTATE_WAIT4BD;
      break;
 
    case ETH_RXSTATE_WAIT4BD:
      eth->rx.bd = eth->regs.bd_ram[eth->rx.bd_index];
      eth->rx.bd_addr = eth->regs.bd_ram[eth->rx.bd_index + 1];
 
      if (TEST_FLAG (eth->rx.bd, ETH_RX_BD, READY))
        {
            /*****************/
          /* Initialize RX */
          CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, MISS);
          CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, INVALID);
          CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, DRIBBLE);
          CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, UVERRUN);
          CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, COLLISION);
          CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, TOOBIG);
          CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, TOOSHORT);
 
          /* Setup file to read from */
          if (TEST_FLAG (eth->regs.moder, ETH_MODER, LOOPBCK))
            {
              eth->rx.fd = eth->txfd;
              eth->rx.offset = &(eth->loopback_offset);
            }
          else
            {
              eth->rx.fd = eth->rxfd;
              eth->rx.offset = 0;
            }
          eth->rx.state = ETH_RXSTATE_RECV;
        }
      else if (!TEST_FLAG (eth->regs.moder, ETH_MODER, RXEN))
        {
          eth->rx.state = ETH_RXSTATE_IDLE;
        }
      else
        {
          nread =
            recv (eth->rtx_sock, eth->rx_buff, ETH_MAXPL, /*MSG_PEEK | */
                  MSG_DONTWAIT);
          if (nread > 0)
            {
              SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, BUSY);
              if (TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, BUSY_M))
                report_interrupt (eth->mac_int);
            }
        }
      break;
 
    case ETH_RXSTATE_RECV:
      switch (eth->rtx_type)
        {
        case ETH_RTX_FILE:
          /* Read packet length */
          if (eth_read_rx_file
              (eth, &(eth->rx.packet_length),
               sizeof (eth->rx.packet_length)) <
              sizeof (eth->rx.packet_length))
            {
              /* TODO: just do what real ethernet would do (some kind of error state) */
              sim_done ();
              break;
            }
 
          /* Packet must be big enough to hold a header */
          if (eth->rx.packet_length < ETHER_HDR_LEN)
            {
              eth_rx_next_packet (eth);
 
              eth->rx.state = ETH_RXSTATE_WAIT4BD;
              break;
            }
 
          eth->rx.bytes_read = 0;
          eth->rx.bytes_left = eth->rx.packet_length;
 
          /* for now Read entire packet into memory */
          nread = eth_read_rx_file (eth, eth->rx_buff, eth->rx.bytes_left);
          if (nread < eth->rx.bytes_left)
            {
              eth->rx.error = 1;
              break;
            }
 
          eth->rx.packet_length = nread;
          eth->rx.bytes_left = nread;
          eth->rx.bytes_read = 0;
 
          eth->rx.state = ETH_RXSTATE_WRITEFIFO;
 
          break;
 
        case ETH_RTX_SOCK:
          nread = recv (eth->rtx_sock, eth->rx_buff, ETH_MAXPL, MSG_DONTWAIT);
 
          if (nread == 0)
            {
              break;
            }
          else if (nread < 0)
            {
              if (errno != EAGAIN)
                {
                  break;
                }
              else
                break;
            }
          /* If not promiscouos mode, check the destination address */
          if (!TEST_FLAG (eth->regs.moder, ETH_MODER, PRO))
            {
              if (TEST_FLAG (eth->regs.moder, ETH_MODER, IAM)
                  && (eth->rx_buff[0] & 1))
                {
                  /* Nothing for now */
                }
 
              if (eth->mac_address[5] != eth->rx_buff[0] ||
                  eth->mac_address[4] != eth->rx_buff[1] ||
                  eth->mac_address[3] != eth->rx_buff[2] ||
                  eth->mac_address[2] != eth->rx_buff[3] ||
                  eth->mac_address[1] != eth->rx_buff[4] ||
                  eth->mac_address[0] != eth->rx_buff[5])
                break;
            }
 
          eth->rx.packet_length = nread;
          eth->rx.bytes_left = nread;
          eth->rx.bytes_read = 0;
 
          eth->rx.state = ETH_RXSTATE_WRITEFIFO;
 
          break;
        case ETH_RTX_VAPI:
          break;
        }
      break;
 
    case ETH_RXSTATE_WRITEFIFO:
#if 1
      send_word = ((unsigned long) eth->rx_buff[eth->rx.bytes_read] << 24) |
        ((unsigned long) eth->rx_buff[eth->rx.bytes_read + 1] << 16) |
        ((unsigned long) eth->rx_buff[eth->rx.bytes_read + 2] << 8) |
        ((unsigned long) eth->rx_buff[eth->rx.bytes_read + 3]);
      set_direct32 (eth->rx.bd_addr + eth->rx.bytes_read, send_word, 0, 0);
      /* update counters */
      eth->rx.bytes_left -= 4;
      eth->rx.bytes_read += 4;
#else
      set_direct8 (eth->rx.bd_addr + eth->rx.bytes_read,
                   eth->rx_buff[eth->rx.bytes_read], 0, 0);
      eth->rx.bytes_left -= 1;
      eth->rx.bytes_read += 1;
#endif
 
      if (eth->rx.bytes_left <= 0)
        {
          /* Write result to bd */
          SET_FIELD (eth->rx.bd, ETH_RX_BD, LENGTH, eth->rx.packet_length);
          CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, READY);
          SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, RXB);
 
          if (eth->rx.packet_length <
              (GET_FIELD (eth->regs.packetlen, ETH_PACKETLEN, MINFL) - 4))
            SET_FLAG (eth->rx.bd, ETH_RX_BD, TOOSHORT);
          if (eth->rx.packet_length >
              GET_FIELD (eth->regs.packetlen, ETH_PACKETLEN, MAXFL))
            SET_FLAG (eth->rx.bd, ETH_RX_BD, TOOBIG);
 
          eth->regs.bd_ram[eth->rx.bd_index] = eth->rx.bd;
 
          /* advance to next BD */
          if (TEST_FLAG (eth->rx.bd, ETH_RX_BD, WRAP)
              || eth->rx.bd_index >= ETH_BD_COUNT)
            eth->rx.bd_index = eth->regs.tx_bd_num << 1;
          else
            eth->rx.bd_index += 2;
 
          if ((TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, RXB_M)) &&
              (TEST_FLAG (eth->rx.bd, ETH_RX_BD, IRQ)))
            {
              report_interrupt (eth->mac_int);
            }
 
          /* ready to receive next packet */
          eth->rx.state = ETH_RXSTATE_IDLE;
        }
      break;
    }
 
  /* Reschedule */
  SCHED_ADD (eth_controller_rx_clock, dat, 1);
}
 
/* ========================================================================= */
/* Move to next RX BD */
static void
eth_rx_next_packet (struct eth_device *eth)
{
  /* Skip any possible leftovers */
  if (eth->rx.bytes_left)
    eth_skip_rx_file (eth, eth->rx.bytes_left);
}
 
/* "Skip" bytes in RX file */
static void
eth_skip_rx_file (struct eth_device *eth, off_t count)
{
  eth->rx.offset += count;
}
 
/*
 * Utility function to read from the ethernet RX file
 * This function moves the file pointer to the current place in the packet before reading
 */
static ssize_t
eth_read_rx_file (struct eth_device *eth, void *buf, size_t count)
{
  ssize_t result;
 
  if (eth->rx.fd <= 0)
    {
      return 0;
    }
 
  if (eth->rx.offset)
    if (lseek (eth->rx.fd, *(eth->rx.offset), SEEK_SET) == (off_t) - 1)
      {
        return 0;
      }
 
  result = read (eth->rx.fd, buf, count);
  if (eth->rx.offset && result >= 0)
    *(eth->rx.offset) += result;
 
  return result;
}
 
/* ========================================================================= */
 
/*
  Reset. Initializes all registers to default and places devices in
         memory address space.
*/
static void
eth_reset (void *dat)
{
  struct eth_device *eth = dat;
#if HAVE_ETH_PHY
  int j;
  struct sockaddr_ll sll;
#endif /* HAVE_ETH_PHY */
 
  if (eth->baseaddr != 0)
    {
      switch (eth->rtx_type)
        {
        case ETH_RTX_FILE:
          /* (Re-)open TX/RX files */
          if (eth->rxfd > 0)
            close (eth->rxfd);
          if (eth->txfd > 0)
            close (eth->txfd);
          eth->rxfd = eth->txfd = -1;
 
          if ((eth->rxfd = open (eth->rxfile, O_RDONLY)) < 0)
            fprintf (stderr, "Cannot open Ethernet RX file \"%s\"\n",
                     eth->rxfile);
          if ((eth->txfd = open (eth->txfile, O_RDWR | O_CREAT | O_APPEND
#if defined(O_SYNC)             /* BSD / Mac OS X manual doesn't know about O_SYNC */
                                 | O_SYNC
#endif
                                 ,
                                 S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) < 0)
            fprintf (stderr, "Cannot open Ethernet TX file \"%s\"\n",
                     eth->txfile);
          eth->loopback_offset = lseek (eth->txfd, 0, SEEK_END);
 
          break;
#if HAVE_ETH_PHY
        case ETH_RTX_SOCK:
          /* (Re-)open TX/RX sockets */
          if (eth->rtx_sock != 0)
            break;
 
          eth->rtx_sock = socket (PF_PACKET, SOCK_RAW, htons (ETH_P_ALL));
          if (eth->rtx_sock == -1)
            {
              fprintf (stderr, "Cannot open rtx_sock.\n");
              return;
            }
 
          /* get interface index number */
          memset (&(eth->ifr), 0, sizeof (eth->ifr));
          strncpy (eth->ifr.ifr_name, eth->sockif, IFNAMSIZ);
          if (ioctl (eth->rtx_sock, SIOCGIFINDEX, &(eth->ifr)) == -1)
            {
              fprintf (stderr, "SIOCGIFINDEX failed!\n");
              return;
            }
 
          /* Bind to interface... */
          memset (&sll, 0xff, sizeof (sll));
          sll.sll_family = AF_PACKET;   /* allways AF_PACKET */
          sll.sll_protocol = htons (ETH_P_ALL);
          sll.sll_ifindex = eth->ifr.ifr_ifindex;
          if (bind (eth->rtx_sock, (struct sockaddr *) &sll, sizeof (sll)) ==
              -1)
            {
              fprintf (stderr, "Error bind().\n");
              return;
            }
 
          /* first, flush all received packets. */
          do
            {
              fd_set fds;
              struct timeval t;
 
              FD_ZERO (&fds);
              FD_SET (eth->rtx_sock, &fds);
              memset (&t, 0, sizeof (t));
              j = select (FD_SETSIZE, &fds, NULL, NULL, &t);
              if (j > 0)
                recv (eth->rtx_sock, eth->rx_buff, j, 0);
            }
          while (j);
 
          break;
#else /* HAVE_ETH_PHY */
        case ETH_RTX_SOCK:
          fprintf (stderr,
                   "Ethernet phy not enabled in this configuration.  Configure with --enable-ethphy.\n");
          exit (1);
          break;
#endif /* HAVE_ETH_PHY */
        }
 
      /* Set registers to default values */
      memset (&(eth->regs), 0, sizeof (eth->regs));
      eth->regs.moder = 0x0000A000;
      eth->regs.ipgt = 0x00000012;
      eth->regs.ipgr1 = 0x0000000C;
      eth->regs.ipgr2 = 0x00000012;
      eth->regs.packetlen = 0x003C0600;
      eth->regs.collconf = 0x000F003F;
      eth->regs.miimoder = 0x00000064;
      eth->regs.tx_bd_num = 0x00000040;
 
      /* Initialize TX/RX status */
      memset (&(eth->tx), 0, sizeof (eth->tx));
      memset (&(eth->rx), 0, sizeof (eth->rx));
      eth->rx.bd_index = eth->regs.tx_bd_num << 1;
 
      /* Initialize VAPI */
      if (eth->base_vapi_id)
        {
          vapi_install_multi_handler (eth->base_vapi_id, ETH_NUM_VAPI_IDS,
                                      eth_vapi_read, dat);
        }
    }
}
 
/* ========================================================================= */
 
 
/*
  Print register values on stdout
*/
static void
eth_status (void *dat)
{
  struct eth_device *eth = dat;
 
  PRINTF ("\nEthernet MAC at 0x%" PRIxADDR ":\n", eth->baseaddr);
  PRINTF ("MODER        : 0x%08lX\n", eth->regs.moder);
  PRINTF ("INT_SOURCE   : 0x%08lX\n", eth->regs.int_source);
  PRINTF ("INT_MASK     : 0x%08lX\n", eth->regs.int_mask);
  PRINTF ("IPGT         : 0x%08lX\n", eth->regs.ipgt);
  PRINTF ("IPGR1        : 0x%08lX\n", eth->regs.ipgr1);
  PRINTF ("IPGR2        : 0x%08lX\n", eth->regs.ipgr2);
  PRINTF ("PACKETLEN    : 0x%08lX\n", eth->regs.packetlen);
  PRINTF ("COLLCONF     : 0x%08lX\n", eth->regs.collconf);
  PRINTF ("TX_BD_NUM    : 0x%08lX\n", eth->regs.tx_bd_num);
  PRINTF ("CTRLMODER    : 0x%08lX\n", eth->regs.controlmoder);
  PRINTF ("MIIMODER     : 0x%08lX\n", eth->regs.miimoder);
  PRINTF ("MIICOMMAND   : 0x%08lX\n", eth->regs.miicommand);
  PRINTF ("MIIADDRESS   : 0x%08lX\n", eth->regs.miiaddress);
  PRINTF ("MIITX_DATA   : 0x%08lX\n", eth->regs.miitx_data);
  PRINTF ("MIIRX_DATA   : 0x%08lX\n", eth->regs.miirx_data);
  PRINTF ("MIISTATUS    : 0x%08lX\n", eth->regs.miistatus);
  PRINTF ("MAC Address  : %02X:%02X:%02X:%02X:%02X:%02X\n",
          eth->mac_address[0], eth->mac_address[1], eth->mac_address[2],
          eth->mac_address[3], eth->mac_address[4], eth->mac_address[5]);
  PRINTF ("HASH0        : 0x%08lX\n", eth->regs.hash0);
  PRINTF ("HASH1        : 0x%08lX\n", eth->regs.hash1);
}
 
/* ========================================================================= */
 
 
/*
  Read a register
*/
static uint32_t
eth_read32 (oraddr_t addr, void *dat)
{
  struct eth_device *eth = dat;
 
  switch (addr)
    {
    case ETH_MODER:
      return eth->regs.moder;
    case ETH_INT_SOURCE:
      return eth->regs.int_source;
    case ETH_INT_MASK:
      return eth->regs.int_mask;
    case ETH_IPGT:
      return eth->regs.ipgt;
    case ETH_IPGR1:
      return eth->regs.ipgr1;
    case ETH_IPGR2:
      return eth->regs.ipgr2;
    case ETH_PACKETLEN:
      return eth->regs.packetlen;
    case ETH_COLLCONF:
      return eth->regs.collconf;
    case ETH_TX_BD_NUM:
      return eth->regs.tx_bd_num;
    case ETH_CTRLMODER:
      return eth->regs.controlmoder;
    case ETH_MIIMODER:
      return eth->regs.miimoder;
    case ETH_MIICOMMAND:
      return eth->regs.miicommand;
    case ETH_MIIADDRESS:
      return eth->regs.miiaddress;
    case ETH_MIITX_DATA:
      return eth->regs.miitx_data;
    case ETH_MIIRX_DATA:
      return eth->regs.miirx_data;
    case ETH_MIISTATUS:
      return eth->regs.miistatus;
    case ETH_MAC_ADDR0:
      return (((unsigned long) eth->mac_address[3]) << 24) |
        (((unsigned long) eth->mac_address[2]) << 16) |
        (((unsigned long) eth->mac_address[1]) << 8) |
        (unsigned long) eth->mac_address[0];
    case ETH_MAC_ADDR1:
      return (((unsigned long) eth->mac_address[5]) << 8) |
        (unsigned long) eth->mac_address[4];
    case ETH_HASH0:
      return eth->regs.hash0;
    case ETH_HASH1:
      return eth->regs.hash1;
      /*case ETH_DMA_RX_TX: return eth_rx( eth ); */
    }
 
  if ((addr >= ETH_BD_BASE) && (addr < ETH_BD_BASE + ETH_BD_SPACE))
    return eth->regs.bd_ram[(addr - ETH_BD_BASE) / 4];
 
  PRINTF ("eth_read32( 0x%" PRIxADDR " ): Illegal address\n",
          addr + eth->baseaddr);
  return 0;
}
 
/* ========================================================================= */
 
 
/*
  Write a register
*/
static void
eth_write32 (oraddr_t addr, uint32_t value, void *dat)
{
  struct eth_device *eth = dat;
 
  switch (addr)
    {
    case ETH_MODER:
 
      if (!TEST_FLAG (eth->regs.moder, ETH_MODER, RXEN) &&
          TEST_FLAG (value, ETH_MODER, RXEN))
        SCHED_ADD (eth_controller_rx_clock, dat, 1);
      else if (!TEST_FLAG (value, ETH_MODER, RXEN))
        SCHED_FIND_REMOVE (eth_controller_rx_clock, dat);
 
      if (!TEST_FLAG (eth->regs.moder, ETH_MODER, TXEN) &&
          TEST_FLAG (value, ETH_MODER, TXEN))
        SCHED_ADD (eth_controller_tx_clock, dat, 1);
      else if (!TEST_FLAG (value, ETH_MODER, TXEN))
        SCHED_FIND_REMOVE (eth_controller_tx_clock, dat);
 
      eth->regs.moder = value;
 
      if (TEST_FLAG (value, ETH_MODER, RST))
        eth_reset (dat);
      return;
    case ETH_INT_SOURCE:
      if (!(eth->regs.int_source & ~value) && eth->regs.int_source)
        clear_interrupt (eth->mac_int);
      eth->regs.int_source &= ~value;
      return;
    case ETH_INT_MASK:
      eth->regs.int_mask = value;
      return;
    case ETH_IPGT:
      eth->regs.ipgt = value;
      return;
    case ETH_IPGR1:
      eth->regs.ipgr1 = value;
      return;
    case ETH_IPGR2:
      eth->regs.ipgr2 = value;
      return;
    case ETH_PACKETLEN:
      eth->regs.packetlen = value;
      return;
    case ETH_COLLCONF:
      eth->regs.collconf = value;
      return;
    case ETH_TX_BD_NUM:
      eth_write_tx_bd_num (eth, value);
      return;
    case ETH_CTRLMODER:
      eth->regs.controlmoder = value;
      return;
    case ETH_MIIMODER:
      eth->regs.miimoder = value;
      return;
    case ETH_MIICOMMAND:
      eth->regs.miicommand = value;
      return;
    case ETH_MIIADDRESS:
      eth->regs.miiaddress = value;
      return;
    case ETH_MIITX_DATA:
      eth->regs.miitx_data = value;
      return;
    case ETH_MIIRX_DATA:
      eth->regs.miirx_data = value;
      return;
    case ETH_MIISTATUS:
      eth->regs.miistatus = value;
      return;
    case ETH_MAC_ADDR0:
      eth->mac_address[0] = value & 0xFF;
      eth->mac_address[1] = (value >> 8) & 0xFF;
      eth->mac_address[2] = (value >> 16) & 0xFF;
      eth->mac_address[3] = (value >> 24) & 0xFF;
      return;
    case ETH_MAC_ADDR1:
      eth->mac_address[4] = value & 0xFF;
      eth->mac_address[5] = (value >> 8) & 0xFF;
      return;
    case ETH_HASH0:
      eth->regs.hash0 = value;
      return;
    case ETH_HASH1:
      eth->regs.hash1 = value;
      return;
 
      /*case ETH_DMA_RX_TX: eth_tx( eth, value ); return; */
    }
 
  if ((addr >= ETH_BD_BASE) && (addr < ETH_BD_BASE + ETH_BD_SPACE))
    {
      eth->regs.bd_ram[(addr - ETH_BD_BASE) / 4] = value;
      return;
    }
 
  PRINTF ("eth_write32( 0x%" PRIxADDR " ): Illegal address\n",
          addr + eth->baseaddr);
  return;
}
 
/* ========================================================================= */
 
 
/*
 *   VAPI connection to outside
 */
static void
eth_vapi_read (unsigned long id, unsigned long data, void *dat)
{
  unsigned long which;
  struct eth_device *eth = dat;
 
  which = id - eth->base_vapi_id;
 
  if (!eth)
    {
      return;
    }
 
  switch (which)
    {
    case ETH_VAPI_DATA:
      break;
    case ETH_VAPI_CTRL:
      break;
    }
}
 
/* ========================================================================= */
 
 
/* When TX_BD_NUM is written, also reset current RX BD index */
static void
eth_write_tx_bd_num (struct eth_device *eth, unsigned long value)
{
  eth->regs.tx_bd_num = value & 0xFF;
  eth->rx.bd_index = eth->regs.tx_bd_num << 1;
}
 
/* ========================================================================= */
 
/*-----------------------------------------------[ Ethernet configuration ]---*/
 
 
/*---------------------------------------------------------------------------*/
/*!Enable or disable the Ethernet interface
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_enabled (union param_val  val,
             void            *dat)
{
  struct eth_device *eth = dat;
 
  eth->enabled = val.int_val;
 
}       /* eth_enabled() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet interface base address
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_baseaddr (union param_val  val,
              void            *dat)
{
  struct eth_device *eth = dat;
 
  eth->baseaddr = val.addr_val;
 
}       /* eth_baseaddr() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet DMA port
 
   This is not currently supported, so a warning message is printed.
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_dma (union param_val  val,
         void            *dat)
{
  struct eth_device *eth = dat;
 
  fprintf (stderr, "Warning: External Ethernet DMA not currently supported\n");
  eth->dma = val.addr_val;
 
}       /* eth_dma() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet IRQ
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_irq (union param_val  val,
         void            *dat)
{
  struct eth_device *eth = dat;
 
  eth->mac_int = val.int_val;
 
}       /* eth_irq() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet interface type
 
   Currently two types are supported, file and socket. Use of the socket
   requires a compile time option.
 
   @param[in] val  The value to use. 0 for file, 1 for socket.
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_rtx_type (union param_val  val,
              void            *dat)
{
  struct eth_device *eth = dat;
 
  if (val.int_val)
    {
#ifndef HAVE_ETH_PHY
      fprintf (stderr, "Warning: Ethernet PHY socket not enabled in this "
               "configuration (configure with --enable-ethphy): ignored\n");
      return;
#endif
    }
 
  eth->rtx_type = val.int_val;
 
}       /* eth_rtx_type() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet DMA Rx channel
 
   External DMA is not currently supported, so a warning message is printed.
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_rx_channel (union param_val  val,
                void            *dat)
{
  struct eth_device *eth = dat;
 
  fprintf (stderr, "Warning: External Ethernet DMA not currently supported: "
           "Rx channel ignored\n");
  eth->rx_channel = val.int_val;
 
}       /* eth_rx_channel() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet DMA Tx channel
 
   External DMA is not currently supported, so a warning message is printed.
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_tx_channel (union param_val  val,
                void            *dat)
{
  struct eth_device *eth = dat;
 
  fprintf (stderr, "Warning: External Ethernet DMA not currently supported: "
           "Tx channel ignored\n");
  eth->tx_channel = val.int_val;
 
}       /* eth_tx_channel() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet DMA Rx file
 
   Free any previously allocated value.
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_rxfile (union param_val  val,
            void            *dat)
{
  struct eth_device *eth = dat;
 
  if (NULL != eth->rxfile)
    {
      free (eth->rxfile);
      eth->rxfile = NULL;
    }
 
  if (!(eth->rxfile = strdup (val.str_val)))
    {
      fprintf (stderr, "Peripheral Ethernet: Run out of memory\n");
      exit (-1);
    }
}       /* eth_rxfile() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet DMA Tx file
 
   Free any previously allocated value.
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_txfile (union param_val  val,
            void            *dat)
{
  struct eth_device *eth = dat;
 
  if (NULL != eth->txfile)
    {
      free (eth->txfile);
      eth->txfile = NULL;
    }
 
  if (!(eth->txfile = strdup (val.str_val)))
    {
      fprintf (stderr, "Peripheral Ethernet: Run out of memory\n");
      exit (-1);
    }
}       /* eth_txfile() */
 
 
/*---------------------------------------------------------------------------*/
/*!Set the Ethernet socket interface
 
   Free any previously allocated value. This is only meaningful if the socket
   interface is configured.
 
   @param[in] val  The value to use
   @param[in] dat  The config data structure                                 */
/*---------------------------------------------------------------------------*/
static void
eth_sockif (union param_val  val,
            void            *dat)
{
  struct eth_device *eth = dat;
 
#ifndef HAVE_ETH_PHY
  fprintf (stderr, "Warning: Ethernet PHY socket not enabled in this "
           "configuration (configure with --enable-ethphy): "
           "sockif ignored\n");
  return;
#endif
 
  if (NULL != eth->sockif)
    {
      free (eth->sockif);
      eth->sockif = NULL;
    }
 
  if (!(eth->sockif = strdup (val.str_val)))
    {
      fprintf (stderr, "Peripheral Ethernet: Run out of memory\n");
      exit (-1);
    }
}       /* eth_sockif() */
 
 
static void
eth_vapi_id (union param_val  val,
             void            *dat)
{
  struct eth_device *eth = dat;
  eth->base_vapi_id = val.int_val;
}
 
/*---------------------------------------------------------------------------*/
/*!Initialize a new Ethernet configuration
 
   ALL parameters are set explicitly to default values.                      */
/*---------------------------------------------------------------------------*/
static void *
eth_sec_start (void)
{
  struct eth_device *new = malloc (sizeof (struct eth_device));
 
  if (!new)
    {
      fprintf (stderr, "Peripheral Eth: Run out of memory\n");
      exit (-1);
    }
 
  memset (new, 0, sizeof (struct eth_device));
 
  new->enabled      = 1;
  new->baseaddr     = 0;
  new->dma          = 0;
  new->mac_int      = 0;
  new->rtx_type     = 0;
  new->rx_channel   = 0;
  new->tx_channel   = 0;
  new->rxfile       = strdup ("eth_rx");
  new->txfile       = strdup ("eth_tx");
  new->sockif       = strdup ("or1ksim_eth");
  new->base_vapi_id = 0;
 
  return new;
}
 
static void
eth_sec_end (void *dat)
{
  struct eth_device *eth = dat;
  struct mem_ops ops;
 
  if (!eth->enabled)
    {
      free (eth->rxfile);
      free (eth->txfile);
      free (eth->sockif);
      free (eth);
      return;
    }
 
  memset (&ops, 0, sizeof (struct mem_ops));
 
  ops.readfunc32 = eth_read32;
  ops.writefunc32 = eth_write32;
  ops.read_dat32 = dat;
  ops.write_dat32 = dat;
 
  /* FIXME: Correct delay? */
  ops.delayr = 2;
  ops.delayw = 2;
  reg_mem_area (eth->baseaddr, ETH_ADDR_SPACE, 0, &ops);
  reg_sim_stat (eth_status, dat);
  reg_sim_reset (eth_reset, dat);
}
 
 
/*---------------------------------------------------------------------------*/
/*!Register a new Ethernet configuration                                     */
/*---------------------------------------------------------------------------*/
void
reg_ethernet_sec ()
{
  struct config_section *sec =
    reg_config_sec ("ethernet", eth_sec_start, eth_sec_end);
 
  reg_config_param (sec, "enabled",    paramt_int,  eth_enabled);
  reg_config_param (sec, "baseaddr",   paramt_addr, eth_baseaddr);
  reg_config_param (sec, "dma",        paramt_int,  eth_dma);
  reg_config_param (sec, "irq",        paramt_int,  eth_irq);
  reg_config_param (sec, "rtx_type",   paramt_int,  eth_rtx_type);
  reg_config_param (sec, "rx_channel", paramt_int,  eth_rx_channel);
  reg_config_param (sec, "tx_channel", paramt_int,  eth_tx_channel);
  reg_config_param (sec, "rxfile",     paramt_str,  eth_rxfile);
  reg_config_param (sec, "txfile",     paramt_str,  eth_txfile);
  reg_config_param (sec, "sockif",     paramt_str,  eth_sockif);
  reg_config_param (sec, "vapi_id",    paramt_int,  eth_vapi_id);
 
}       /* reg_ethernet_sec() */
 
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1ksim/] [peripheral/] [eth.c] - Blame information for rev 74

Line No.	Rev	Author	Line
1	19	jeremybenn	`/* ethernet.c -- Simulation of Ethernet MAC`
2
3			`Copyright (C) 2001 by Erez Volk, erez@opencores.org`
4			`Ivan Guzvinec, ivang@opencores.org`
5			`Copyright (C) 2008 Embecosm Limited`
6
7			`Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>`
8
9			`This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.`
10
11			`This program is free software; you can redistribute it and/or modify it`
12			`under the terms of the GNU General Public License as published by the Free`
13			`Software Foundation; either version 3 of the License, or (at your option)`
14			`any later version.`
15
16			`This program is distributed in the hope that it will be useful, but WITHOUT`
17			`ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or`
18			`FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for`
19			`more details.`
20
21			`You should have received a copy of the GNU General Public License along`
22			`with this program. If not, see <http://www.gnu.org/licenses/>. */`
23
24			`/* This program is commented throughout in a fashion suitable for processing`
25			`with Doxygen. */`
26
27
28			`/* Autoconf and/or portability configuration */`
29			`#include "config.h"`
30			`#include "port.h"`
31
32			`/* System includes */`
33			`#include <stdlib.h>`
34			`#include <stdio.h>`
35			`#include <sys/types.h>`
36			`#include <sys/stat.h>`
37			`#include <fcntl.h>`
38			`#include <sys/poll.h>`
39			`#include <sys/time.h>`
40			`#include <unistd.h>`