URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1ksim/] [peripheral/] [generic.c] - Blame information for rev 855

Go to most recent revision | Details | Compare with Previous | View Log


/* generic.c -- Generic external peripheral
 
   Copyright (C) 2008 Embecosm Limited
 
   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
 
   This file is part of OpenRISC 1000 Architectural Simulator.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 3 of the License, or (at your option)
   any later version.
 
   This program is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
 
   You should have received a copy of the GNU General Public License along
   with this program.  If not, see <http://www.gnu.org/licenses/>. */
 
/* This program is commented throughout in a fashion suitable for processing
   with Doxygen. */
 
 
/* This is functional simulation of any external peripheral. It's job is to
 * trap accesses in a specific range, so that the simulator can drive an
 * external device.
 *
 * A note on endianess. All external communication is done using HOST
 * endianess. A set of functions are provided to convert between host and
 * model endianess (htoml, htoms, mtohl, mtohs).
 */
 
/* Autoconf and/or portability configuration */
#include "config.h"
 
/* System includes */
#include <stdlib.h>
#include <stdio.h>
 
/* Package includes */
#include "arch.h"
#include "sim-config.h"
#include "abstract.h"
#include "toplevel-support.h"
#include "sim-cmd.h"
 
 
/*! State associated with the generic device. */
struct dev_generic
{
 
  /* Info about a particular transaction */
 
  enum
  {                             /* Direction of the access */
    GENERIC_READ,
    GENERIC_WRITE
  } trans_direction;
 
  enum
  {                             /* Size of the access */
    GENERIC_BYTE,
    GENERIC_HW,
    GENERIC_WORD
  } trans_size;
 
  uint32_t value;               /* The value to read/write */
 
  /* Configuration */
 
  int enabled;                  /* Device enabled */
  int byte_enabled;             /* Byte R/W allowed */
  int hw_enabled;               /* Half word R/W allowed */
  int word_enabled;             /* Full word R/W allowed */
  char *name;                   /* Name of the device */
  oraddr_t baseaddr;            /* Base address of device */
  uint32_t size;                /* Address space size (bytes) */
 
};
 
 
/* --------------------------------------------------------------------------*/
/*!Read a byte from an external device
 
   To model Wishbone accurately, we always do this as a 4-byte access, with a
   mask for the bytes we don't want.
 
   Since this is only a byte, the endianess of the result is irrelevant.
 
   @note We are passed the device address, but we must convert it to a full
         address for external use, to allow the single upcall handler to
         decode multiple generic devices.
 
   @param[in] addr  The device address to read from (host endian).
   @param[in] dat   The device data structure
 
   @return  The byte read.                                                   */
/* --------------------------------------------------------------------------*/
static uint8_t
generic_read_byte (oraddr_t  addr,
                   void     *dat)
{
  struct dev_generic *dev = (struct dev_generic *) dat;
 
  if (!config.ext.read_up)
    {
      fprintf (stderr, "Byte read from disabled generic device\n");
      return 0;
    }
  else if (addr >= dev->size)
    {
      fprintf (stderr, "Byte read  out of range for generic device %s "
               "(addr %" PRIxADDR ")\n", dev->name, addr);
      return 0;
    }
  else
    {
      unsigned long int  fulladdr = (unsigned long int) (addr + dev->baseaddr);
      unsigned long int  wordaddr = fulladdr & 0xfffffffc;
      int                bytenum  = fulladdr & 0x00000003;
 
      unsigned char      mask[4];
      unsigned char      res[4];
 
      /* Set the mask, read and get the result */
      memset (mask, 0, sizeof (mask));
      mask[bytenum] = 0xff;
 
      if (0 != config.ext.read_up (config.ext.class_ptr, wordaddr, mask, res,
                                   4))
        {
          fprintf (stderr, "Warning: external byte read failed.\n");
          return  0;
        }
 
      return  res[bytenum];
    }
}       /* generic_read_byte() */
 
 
/* --------------------------------------------------------------------------*/
/*!Write a byte to an external device
 
   To model Wishbone accurately, we always do this as a 4-byte access, with a
   mask for the bytes we don't want.
 
   Since this is only a byte, the endianess of the value is irrelevant.
 
   @note We are passed the device address, but we must convert it to a full
         address for external use, to allow the single upcall handler to
         decode multiple generic devices.
 
   @param[in] addr  The device address to write to (host endian)
   @param[in] value The byte value to write
   @param[in] dat   The device data structure                                */
/* --------------------------------------------------------------------------*/
static void
generic_write_byte (oraddr_t  addr,
                    uint8_t   value,
                    void     *dat)
{
  struct dev_generic *dev = (struct dev_generic *) dat;
 
  if (!config.ext.write_up)
    {
      fprintf (stderr, "Byte write to disabled generic device\n");
    }
  else if (addr >= dev->size)
    {
      fprintf (stderr, "Byte written out of range for generic device %s "
               "(addr %" PRIxADDR ")\n", dev->name, addr);
    }
  else
    {
      unsigned long int  fulladdr = (unsigned long int) (addr + dev->baseaddr);
      unsigned long int  wordaddr = fulladdr & 0xfffffffc;
      int                bytenum  = fulladdr & 0x00000003;
 
      unsigned char      mask[4];
      unsigned char      val[4];
 
      /* Set the mask and write data do the write. */
      memset (mask, 0, sizeof (mask));
      mask[bytenum] = 0xff;
      val[bytenum]  = value;
 
      if (0 != config.ext.write_up (config.ext.class_ptr, wordaddr, mask, val,
                                    4))
        {
          fprintf (stderr, "Warning: external byte write failed.\n");
        }
    }
}       /* generic_write_byte() */
 
 
/* --------------------------------------------------------------------------*/
/*!Read a half word from an external device
 
   To model Wishbone accurately, we always do this as a 4-byte access, with a
   mask for the bytes we don't want.
 
   Since this is a half word, the result must be converted to host endianess.
 
   @note We are passed the device address, but we must convert it to a full
         address for external use, to allow the single upcall handler to
         decode multiple generic devices.
 
   @param[in] addr  The device address to read from (host endian).
   @param[in] dat   The device data structure.
 
   @return  The half word read (host endian).                                */
/* --------------------------------------------------------------------------*/
static uint16_t
generic_read_hw (oraddr_t  addr,
                 void     *dat)
{
  struct dev_generic *dev = (struct dev_generic *) dat;
 
  if (!config.ext.read_up)
    {
      fprintf (stderr, "Half word read from disabled generic device\n");
      return 0;
    }
  else if (addr >= dev->size)
    {
      fprintf (stderr, "Half-word read  out of range for generic device %s "
               "(addr %" PRIxADDR ")\n", dev->name, addr);
      return 0;
    }
  else if (addr & 0x1)
    {
      /* This should be trapped elsewhere - here for safety. */
      fprintf (stderr,
               "Unaligned half word read from 0x%" PRIxADDR " ignored\n",
               addr);
      return 0;
    }
  else
    {
      unsigned long int  fulladdr = (unsigned long int) (addr + dev->baseaddr);
      unsigned long int  wordaddr = fulladdr & 0xfffffffc;
      int                hwnum    = fulladdr & 0x00000002;
 
      unsigned char      mask[4];
      unsigned char      res[4];
 
      /* Set the mask, read and get the result */
      memset (mask, 0, sizeof (mask));
      mask[hwnum    ] = 0xff;
      mask[hwnum + 1] = 0xff;
 
      if (0 != config.ext.read_up (config.ext.class_ptr, wordaddr, mask, res,
                                   4))
        {
          fprintf (stderr, "Warning: external half word read failed.\n");
          return  0;
        }
 
      /* Result converted according to endianess */
#ifdef OR32_BIG_ENDIAN
      return  (unsigned short int) res[hwnum    ] << 8 |
              (unsigned short int) res[hwnum + 1];
#else
      return  (unsigned short int) res[hwnum + 1] << 8 |
              (unsigned short int) res[hwnum    ];
#endif
    }
}       /* generic_read_hw() */
 
 
/* --------------------------------------------------------------------------*/
/*!Write a half word to an external device
 
   To model Wishbone accurately, we always do this as a 4-byte access, with a
   mask for the bytes we don't want.
 
   Since this is a half word, the value must be converted from host endianess.
 
   @note We are passed the device address, but we must convert it to a full
         address for external use, to allow the single upcall handler to
         decode multiple generic devices.
 
   @param[in] addr  The device address to write to (host endian).
   @param[in] value The half word value to write (model endian).
   @param[in] dat   The device data structure.                               */
/* --------------------------------------------------------------------------*/
static void
generic_write_hw (oraddr_t  addr,
                  uint16_t  value,
                  void     *dat)
{
  struct dev_generic *dev = (struct dev_generic *) dat;
 
  if (!config.ext.write_up)
    {
      fprintf (stderr, "Half word write to disabled generic device\n");
    }
  else if (addr >= dev->size)
    {
      fprintf (stderr, "Half-word written  out of range for generic device %s "
               "(addr %" PRIxADDR ")\n", dev->name, addr);
    }
  else if (addr & 0x1)
    {
      fprintf (stderr,
               "Unaligned half word write to 0x%" PRIxADDR " ignored\n", addr);
    }
  else
    {
      unsigned long int  fulladdr = (unsigned long int) (addr + dev->baseaddr);
      unsigned long int  wordaddr = fulladdr & 0xfffffffc;
      int                hwnum    = fulladdr & 0x00000002;
 
      unsigned char      mask[4];
      unsigned char      val[4];
 
      /* Set the mask and write data do the write. */
      memset (mask, 0, sizeof (mask));
      mask[hwnum    ] = 0xff;
      mask[hwnum + 1] = 0xff;
 
      /* Value converted according to endianess */
#ifdef OR32_BIG_ENDIAN
      val[hwnum    ] = (unsigned char) (value >> 8);
      val[hwnum + 1] = (unsigned char) (value     );
#else
      val[hwnum + 1] = (unsigned char) (value >> 8);
      val[hwnum    ] = (unsigned char) (value     );
#endif
 
      if (0 != config.ext.write_up (config.ext.class_ptr, wordaddr, mask, val,
                                    4))
        {
          fprintf (stderr, "Warning: external half word write failed.\n");
        }
    }
}       /* generic_write_hw() */
 
 
/* --------------------------------------------------------------------------*/
/*!Read a full word from an external device
 
   Since this is a full word, the result must be converted to host endianess.
 
   @note We are passed the device address, but we must convert it to a full
         address for external use, to allow the single upcall handler to
         decode multiple generic devices.
 
   @param[in] addr  The device address to read from (host endian).
   @param[in] dat   The device data structure.
 
   @return  The full word read (host endian).                                */
/* --------------------------------------------------------------------------*/
static uint32_t
generic_read_word (oraddr_t  addr,
                   void     *dat)
{
  struct dev_generic *dev = (struct dev_generic *) dat;
 
  if (!config.ext.read_up)
    {
      fprintf (stderr, "Full word read from disabled generic device\n");
      return 0;
    }
  else if (addr >= dev->size)
    {
      fprintf (stderr, "Full word read  out of range for generic device %s "
               "(addr %" PRIxADDR ")\n", dev->name, addr);
      return 0;
    }
  else if (0 != (addr & 0x3))
    {
      fprintf (stderr,
               "Unaligned full word read from 0x%" PRIxADDR " ignored\n",
               addr);
      return 0;
    }
  else
    {
      unsigned long int  wordaddr = (unsigned long int) (addr + dev->baseaddr);
 
      unsigned char      mask[4];
      unsigned char      res[4];
 
      /* Set the mask, read and get the result */
      memset (mask, 0xff, sizeof (mask));
 
      if (0 != config.ext.read_up (config.ext.class_ptr, wordaddr, mask, res,
                                   4))
        {
          fprintf (stderr, "Warning: external full word read failed.\n");
          return  0;
        }
 
      /* Result converted according to endianess */
#ifdef OR32_BIG_ENDIAN
      return  (unsigned long int) res[0] << 24 |
              (unsigned long int) res[1] << 16 |
              (unsigned long int) res[2] <<  8 |
              (unsigned long int) res[3];
#else
      return  (unsigned long int) res[3] << 24 |
              (unsigned long int) res[2] << 16 |
              (unsigned long int) res[1] <<  8 |
              (unsigned long int) res[0];
#endif
    }
}       /* generic_read_word() */
 
 
/* --------------------------------------------------------------------------*/
/*!Write a full word to an external device
 
   Since this is a half word, the value must be converted from host endianess.
 
   @note We are passed the device address, but we must convert it to a full
         address for external use, to allow the single upcall handler to
         decode multiple generic devices.
 
   @param[in] addr  The device address to write to (host endian).
   @param[in] value The full word value to write (host endian).
   @param[in] dat   The device data structure.                               */
/* --------------------------------------------------------------------------*/
static void
generic_write_word (oraddr_t  addr,
                    uint32_t  value,
                    void     *dat)
{
  struct dev_generic *dev = (struct dev_generic *) dat;
 
  if (!config.ext.write_up)
    {
      fprintf (stderr, "Full word write to disabled generic device\n");
    }
  else if (addr >= dev->size)
    {
      fprintf (stderr, "Full word written  out of range for generic device %s "
               "(addr %" PRIxADDR ")\n", dev->name, addr);
    }
  else if (0 != (addr & 0x3))
    {
      fprintf (stderr,
               "Unaligned full word write to 0x%" PRIxADDR " ignored\n", addr);
    }
  else
    {
      unsigned long int  wordaddr = (unsigned long int) (addr + dev->baseaddr);
 
      unsigned char      mask[4];
      unsigned char      val[4];
 
      /* Set the mask and write data do the write. */
      memset (mask, 0xff, sizeof (mask));
 
      /* Value converted according to endianess */
#ifdef OR32_BIG_ENDIAN
      val[0] = (unsigned char) (value >> 24);
      val[1] = (unsigned char) (value >> 16);
      val[2] = (unsigned char) (value >>  8);
      val[3] = (unsigned char) (value      );
#else
      val[3] = (unsigned char) (value >> 24);
      val[2] = (unsigned char) (value >> 16);
      val[1] = (unsigned char) (value >>  8);
      val[0] = (unsigned char) (value      );
#endif
 
      if (0 != config.ext.write_up (config.ext.class_ptr, wordaddr, mask, val,
                                    4))
        {
          fprintf (stderr, "Warning: external full word write failed.\n");
        }
    }
}       /* generic_write_word() */
 
 
/* Reset is a null operation */
 
static void
generic_reset (void *dat)
{
  return;
 
}                               /* generic_reset() */
 
 
/* Status report can only advise of configuration. */
 
static void
generic_status (void *dat)
{
  struct dev_generic *dev = (struct dev_generic *) dat;
 
  PRINTF ("\nGeneric device \"%s\" at 0x%" PRIxADDR ":\n", dev->name,
          dev->baseaddr);
  PRINTF ("  Size 0x%" PRIx32 "\n", dev->size);
 
  if (dev->byte_enabled)
    {
      PRINTF ("  Byte R/W enabled\n");
    }
 
  if (dev->hw_enabled)
    {
      PRINTF ("  Half word R/W enabled\n");
    }
 
  if (dev->word_enabled)
    {
      PRINTF ("  Full word R/W enabled\n");
    }
 
  PRINTF ("\n");
 
}                               /* generic_status() */
 
 
/* Functions to set configuration */
 
static void
generic_enabled (union param_val val, void *dat)
{
  ((struct dev_generic *) dat)->enabled = val.int_val;
 
}                               /* generic_enabled() */
 
 
static void
generic_byte_enabled (union param_val val, void *dat)
{
  ((struct dev_generic *) dat)->byte_enabled = val.int_val;
 
}                               /* generic_byte_enabled() */
 
 
static void
generic_hw_enabled (union param_val val, void *dat)
{
  ((struct dev_generic *) dat)->hw_enabled = val.int_val;
 
}                               /* generic_hw_enabled() */
 
 
static void
generic_word_enabled (union param_val val, void *dat)
{
  ((struct dev_generic *) dat)->word_enabled = val.int_val;
 
}                               /* generic_word_enabled() */
 
 
static void
generic_name (union param_val val, void *dat)
{
  ((struct dev_generic *) dat)->name = strdup (val.str_val);
 
  if (!((struct dev_generic *) dat)->name)
    {
      fprintf (stderr, "Peripheral 16450: name \"%s\": Run out of memory\n",
               val.str_val);
      exit (-1);
    }
}                               /* generic_name() */
 
 
static void
generic_baseaddr (union param_val val, void *dat)
{
  ((struct dev_generic *) dat)->baseaddr = val.addr_val;
 
}                               /* generic_baseaddr() */
 
 
static void
generic_size (union param_val val, void *dat)
{
  ((struct dev_generic *) dat)->size = val.int_val;
 
}                               /* generic_size() */
 
 
/* Start of new generic section */
 
static void *
generic_sec_start ()
{
  struct dev_generic *new =
    (struct dev_generic *) malloc (sizeof (struct dev_generic));
 
  if (0 == new)
    {
      fprintf (stderr, "Generic peripheral: Run out of memory\n");
      exit (-1);
    }
 
  /* Default names */
 
  new->enabled = 1;
  new->byte_enabled = 1;
  new->hw_enabled = 1;
  new->word_enabled = 1;
  new->name = "anonymous external peripheral";
  new->baseaddr = 0;
  new->size = 0;
 
  return new;
 
}                               /* generic_sec_start() */
 
 
/* End of new generic section */
 
static void
generic_sec_end (void *dat)
{
  struct dev_generic *generic = (struct dev_generic *) dat;
  struct mem_ops ops;
 
  /* Give up if not enabled, or if size is zero, or if no access size is
     enabled. */
 
  if (!generic->enabled)
    {
      free (dat);
      return;
    }
 
  if (0 == generic->size)
    {
      fprintf (stderr, "Generic peripheral \"%s\" has size 0: ignoring",
               generic->name);
      free (dat);
      return;
    }
 
  if (!generic->byte_enabled &&
      !generic->hw_enabled && !generic->word_enabled)
    {
      fprintf (stderr, "Generic peripheral \"%s\" has no access: ignoring",
               generic->name);
      free (dat);
      return;
    }
 
  /* Zero all the ops, then set the ones we care about. Read/write delays will
   * come from the peripheral if desired.
   */
 
  memset (&ops, 0, sizeof (struct mem_ops));
 
  if (generic->byte_enabled)
    {
      ops.readfunc8 = generic_read_byte;
      ops.writefunc8 = generic_write_byte;
      ops.read_dat8 = dat;
      ops.write_dat8 = dat;
    }
 
  if (generic->hw_enabled)
    {
      ops.readfunc16 = generic_read_hw;
      ops.writefunc16 = generic_write_hw;
      ops.read_dat16 = dat;
      ops.write_dat16 = dat;
    }
 
  if (generic->word_enabled)
    {
      ops.readfunc32 = generic_read_word;
      ops.writefunc32 = generic_write_word;
      ops.read_dat32 = dat;
      ops.write_dat32 = dat;
    }
 
  /* Register everything */
 
  reg_mem_area (generic->baseaddr, generic->size, 0, &ops);
 
  reg_sim_reset (generic_reset, dat);
  reg_sim_stat (generic_status, dat);
 
}                               /* generic_sec_end() */
 
 
/* Register a generic section. */
 
void
reg_generic_sec (void)
{
  struct config_section *sec = reg_config_sec ("generic",
                                               generic_sec_start,
                                               generic_sec_end);
 
  reg_config_param (sec, "enabled",      PARAMT_INT, generic_enabled);
  reg_config_param (sec, "byte_enabled", PARAMT_INT, generic_byte_enabled);
  reg_config_param (sec, "hw_enabled",   PARAMT_INT, generic_hw_enabled);
  reg_config_param (sec, "word_enabled", PARAMT_INT, generic_word_enabled);
  reg_config_param (sec, "name",         PARAMT_STR, generic_name);
  reg_config_param (sec, "baseaddr",     PARAMT_ADDR, generic_baseaddr);
  reg_config_param (sec, "size",         PARAMT_INT, generic_size);
 
}                               /* reg_generic_sec */

Line No.	Rev	Author	Line
1	19	jeremybenn	`/* generic.c -- Generic external peripheral`
2
3			`Copyright (C) 2008 Embecosm Limited`
4
5			`Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>`
6
7			`This file is part of OpenRISC 1000 Architectural Simulator.`
8
9			`This program is free software; you can redistribute it and/or modify it`
10			`under the terms of the GNU General Public License as published by the Free`
11			`Software Foundation; either version 3 of the License, or (at your option)`
12			`any later version.`
13
14			`This program is distributed in the hope that it will be useful, but WITHOUT`
15			`ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or`
16			`FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for`
17			`more details.`
18
19			`You should have received a copy of the GNU General Public License along`
20			`with this program. If not, see <http://www.gnu.org/licenses/>. */`
21
22			`/* This program is commented throughout in a fashion suitable for processing`
23			`with Doxygen. */`
24
25
26			`/* This is functional simulation of any external peripheral. It's job is to`
27			`* trap accesses in a specific range, so that the simulator can drive an`
28			`* external device.`
29			`*`
30			`* A note on endianess. All external communication is done using HOST`
31			`* endianess. A set of functions are provided to convert between host and`
32			`* model endianess (htoml, htoms, mtohl, mtohs).`
33			`*/`
34
35			`/* Autoconf and/or portability configuration */`
36			`#include "config.h"`
37
38			`/* System includes */`
39			`#include <stdlib.h>`
40			`#include <stdio.h>`
41
42			`/* Package includes */`
43			`#include "arch.h"`
44			`#include "sim-config.h"`
45			`#include "abstract.h"`
46			`#include "toplevel-support.h"`
47			`#include "sim-cmd.h"`
48
49
50			`/! State associated with the generic device. /`
51			`struct dev_generic`
52			`{`
53
54			`/* Info about a particular transaction */`
55
56			`enum`
57			`{ /* Direction of the access */`
58			`GENERIC_READ,`
59			`GENERIC_WRITE`
60			`} trans_direction;`
61
62			`enum`
63			`{ /* Size of the access */`
64			`GENERIC_BYTE,`
65			`GENERIC_HW,`
66			`GENERIC_WORD`
67			`} trans_size;`
68
69			`uint32_t value; /* The value to read/write */`
70
71			`/* Configuration */`
72
73			`int enabled; /* Device enabled */`
74			`int byte_enabled; /* Byte R/W allowed */`
75			`int hw_enabled; /* Half word R/W allowed */`
76			`int word_enabled; /* Full word R/W allowed */`
77			`char name; / Name of the device */`
78			`oraddr_t baseaddr; /* Base address of device */`
79			`uint32_t size; /* Address space size (bytes) */`
80
81			`};`
82
83
84	93	jeremybenn	`/* --------------------------------------------------------------------------*/`
85			`/*!Read a byte from an external device`
86	19	jeremybenn
87	93	jeremybenn	`To model Wishbone accurately, we always do this as a 4-byte access, with a`
88			`mask for the bytes we don't want.`
89	19	jeremybenn
90	93	jeremybenn	`Since this is only a byte, the endianess of the result is irrelevant.`
91	19	jeremybenn
92	93	jeremybenn	`@note We are passed the device address, but we must convert it to a full`
93			`address for external use, to allow the single upcall handler to`
94			`decode multiple generic devices.`
95	19	jeremybenn
96	93	jeremybenn	`@param[in] addr The device address to read from (host endian).`
97			`@param[in] dat The device data structure`
98	19	jeremybenn
99	93	jeremybenn	`@return The byte read. */`
100			`/* --------------------------------------------------------------------------*/`
101	19	jeremybenn	`static uint8_t`
102	93	jeremybenn	`generic_read_byte (oraddr_t addr,`
103			`void *dat)`
104	19	jeremybenn	`{`
105			`struct dev_generic dev = (struct dev_generic ) dat;`
106
107	93	jeremybenn	`if (!config.ext.read_up)`
108	19	jeremybenn	`{`
109			`fprintf (stderr, "Byte read from disabled generic device\n");`
110			`return 0;`
111			`}`
112			`else if (addr >= dev->size)`
113			`{`
114			`fprintf (stderr, "Byte read out of range for generic device %s "`
115			`"(addr %" PRIxADDR ")\n", dev->name, addr);`
116			`return 0;`
117			`}`
118			`else`
119			`{`
120	93	jeremybenn	`unsigned long int fulladdr = (unsigned long int) (addr + dev->baseaddr);`
121			`unsigned long int wordaddr = fulladdr & 0xfffffffc;`
122			`int bytenum = fulladdr & 0x00000003;`
123	19	jeremybenn
124	93	jeremybenn	`unsigned char mask[4];`
125			`unsigned char res[4];`
126	19	jeremybenn
127	93	jeremybenn	`/* Set the mask, read and get the result */`
128			`memset (mask, 0, sizeof (mask));`
129			`mask[bytenum] = 0xff;`
130	19	jeremybenn
131	101	jeremybenn	`if (0 != config.ext.read_up (config.ext.class_ptr, wordaddr, mask, res,`
132			`4))`
133	93	jeremybenn	`{`
134			`fprintf (stderr, "Warning: external byte read failed.\n");`
135			`return 0;`
136			`}`
137	19	jeremybenn
138	93	jeremybenn	`return res[bytenum];`
139	19	jeremybenn	`}`
140	93	jeremybenn	`} /* generic_read_byte() */`
141	19	jeremybenn
142
143	93	jeremybenn	`/* --------------------------------------------------------------------------*/`
144			`/*!Write a byte to an external device`
145
146			`To model Wishbone accurately, we always do this as a 4-byte access, with a`
147			`mask for the bytes we don't want.`
148
149			`Since this is only a byte, the endianess of the value is irrelevant.`
150
151			`@note We are passed the device address, but we must convert it to a full`
152			`address for external use, to allow the single upcall handler to`
153			`decode multiple generic devices.`
154
155			`@param[in] addr The device address to write to (host endian)`
156			`@param[in] value The byte value to write`
157			`@param[in] dat The device data structure */`
158			`/* --------------------------------------------------------------------------*/`
159	19	jeremybenn	`static void`
160	93	jeremybenn	`generic_write_byte (oraddr_t addr,`
161			`uint8_t value,`
162			`void *dat)`
163	19	jeremybenn	`{`
164			`struct dev_generic dev = (struct dev_generic ) dat;`
165
166	93	jeremybenn	`if (!config.ext.write_up)`
167	19	jeremybenn	`{`
168			`fprintf (stderr, "Byte write to disabled generic device\n");`
169			`}`
170			`else if (addr >= dev->size)`
171			`{`
172			`fprintf (stderr, "Byte written out of range for generic device %s "`
173			`"(addr %" PRIxADDR ")\n", dev->name, addr);`
174			`}`
175			`else`
176			`{`
177	93	jeremybenn	`unsigned long int fulladdr = (unsigned long int) (addr + dev->baseaddr);`
178			`unsigned long int wordaddr = fulladdr & 0xfffffffc;`
179			`int bytenum = fulladdr & 0x00000003;`
180	19	jeremybenn
181	93	jeremybenn	`unsigned char mask[4];`
182			`unsigned char val[4];`
183	19	jeremybenn
184	93	jeremybenn	`/* Set the mask and write data do the write. */`
185			`memset (mask, 0, sizeof (mask));`
186			`mask[bytenum] = 0xff;`
187			`val[bytenum] = value;`
188	19	jeremybenn
189	101	jeremybenn	`if (0 != config.ext.write_up (config.ext.class_ptr, wordaddr, mask, val,`
190			`4))`
191	93	jeremybenn	`{`
192			`fprintf (stderr, "Warning: external byte write failed.\n");`
193			`}`
194	19	jeremybenn	`}`
195	93	jeremybenn	`} /* generic_write_byte() */`
196	19	jeremybenn
197
198	93	jeremybenn	`/* --------------------------------------------------------------------------*/`
199			`/*!Read a half word from an external device`
200
201			`To model Wishbone accurately, we always do this as a 4-byte access, with a`
202			`mask for the bytes we don't want.`
203
204			`Since this is a half word, the result must be converted to host endianess.`
205
206			`@note We are passed the device address, but we must convert it to a full`
207			`address for external use, to allow the single upcall handler to`
208			`decode multiple generic devices.`
209
210			`@param[in] addr The device address to read from (host endian).`
211			`@param[in] dat The device data structure.`
212
213			`@return The half word read (host endian). */`
214			`/* --------------------------------------------------------------------------*/`
215	19	jeremybenn	`static uint16_t`
216	93	jeremybenn	`generic_read_hw (oraddr_t addr,`
217			`void *dat)`
218	19	jeremybenn	`{`
219			`struct dev_generic dev = (struct dev_generic ) dat;`
220
221	93	jeremybenn	`if (!config.ext.read_up)`
222	19	jeremybenn	`{`
223			`fprintf (stderr, "Half word read from disabled generic device\n");`
224			`return 0;`
225			`}`
226			`else if (addr >= dev->size)`
227			`{`
228			`fprintf (stderr, "Half-word read out of range for generic device %s "`
229			`"(addr %" PRIxADDR ")\n", dev->name, addr);`
230			`return 0;`
231			`}`
232			`else if (addr & 0x1)`
233			`{`
234	93	jeremybenn	`/* This should be trapped elsewhere - here for safety. */`
235	19	jeremybenn	`fprintf (stderr,`
236			`"Unaligned half word read from 0x%" PRIxADDR " ignored\n",`
237			`addr);`
238			`return 0;`
239			`}`
240			`else`
241			`{`
242	93	jeremybenn	`unsigned long int fulladdr = (unsigned long int) (addr + dev->baseaddr);`
243			`unsigned long int wordaddr = fulladdr & 0xfffffffc;`
244			`int hwnum = fulladdr & 0x00000002;`
245	19	jeremybenn
246	93	jeremybenn	`unsigned char mask[4];`
247			`unsigned char res[4];`
248	19	jeremybenn
249	93	jeremybenn	`/* Set the mask, read and get the result */`
250			`memset (mask, 0, sizeof (mask));`
251			`mask[hwnum ] = 0xff;`
252			`mask[hwnum + 1] = 0xff;`
253	19	jeremybenn
254	101	jeremybenn	`if (0 != config.ext.read_up (config.ext.class_ptr, wordaddr, mask, res,`
255			`4))`
256	93	jeremybenn	`{`
257			`fprintf (stderr, "Warning: external half word read failed.\n");`
258			`return 0;`
259			`}`
260	19	jeremybenn
261	93	jeremybenn	`/* Result converted according to endianess */`
262			`#ifdef OR32_BIG_ENDIAN`
263			`return (unsigned short int) res[hwnum ] << 8 \|`
264			`(unsigned short int) res[hwnum + 1];`
265			`#else`
266			`return (unsigned short int) res[hwnum + 1] << 8 \|`
267			`(unsigned short int) res[hwnum ];`
268			`#endif`
269	19	jeremybenn	`}`
270	93	jeremybenn	`} /* generic_read_hw() */`
271	19	jeremybenn
272
273	93	jeremybenn	`/* --------------------------------------------------------------------------*/`
274			`/*!Write a half word to an external device`
275
276			`To model Wishbone accurately, we always do this as a 4-byte access, with a`
277			`mask for the bytes we don't want.`
278
279			`Since this is a half word, the value must be converted from host endianess.`
280
281			`@note We are passed the device address, but we must convert it to a full`
282			`address for external use, to allow the single upcall handler to`
283			`decode multiple generic devices.`
284
285			`@param[in] addr The device address to write to (host endian).`
286			`@param[in] value The half word value to write (model endian).`
287			`@param[in] dat The device data structure. */`
288			`/* --------------------------------------------------------------------------*/`
289	19	jeremybenn	`static void`
290	93	jeremybenn	`generic_write_hw (oraddr_t addr,`
291			`uint16_t value,`
292			`void *dat)`
293	19	jeremybenn	`{`
294			`struct dev_generic dev = (struct dev_generic ) dat;`
295
296	93	jeremybenn	`if (!config.ext.write_up)`
297	19	jeremybenn	`{`
298			`fprintf (stderr, "Half word write to disabled generic device\n");`
299			`}`
300			`else if (addr >= dev->size)`
301			`{`
302			`fprintf (stderr, "Half-word written out of range for generic device %s "`
303			`"(addr %" PRIxADDR ")\n", dev->name, addr);`
304			`}`
305			`else if (addr & 0x1)`
306			`{`
307			`fprintf (stderr,`
308			`"Unaligned half word write to 0x%" PRIxADDR " ignored\n", addr);`
309			`}`
310			`else`
311			`{`
312	93	jeremybenn	`unsigned long int fulladdr = (unsigned long int) (addr + dev->baseaddr);`
313			`unsigned long int wordaddr = fulladdr & 0xfffffffc;`
314			`int hwnum = fulladdr & 0x00000002;`
315	19	jeremybenn
316	93	jeremybenn	`unsigned char mask[4];`
317			`unsigned char val[4];`
318	19	jeremybenn
319	93	jeremybenn	`/* Set the mask and write data do the write. */`
320			`memset (mask, 0, sizeof (mask));`
321			`mask[hwnum ] = 0xff;`
322			`mask[hwnum + 1] = 0xff;`
323	19	jeremybenn
324	93	jeremybenn	`/* Value converted according to endianess */`
325			`#ifdef OR32_BIG_ENDIAN`
326			`val[hwnum ] = (unsigned char) (value >> 8);`
327			`val[hwnum + 1] = (unsigned char) (value );`
328			`#else`
329			`val[hwnum + 1] = (unsigned char) (value >> 8);`
330			`val[hwnum ] = (unsigned char) (value );`
331			`#endif`
332	19	jeremybenn
333	101	jeremybenn	`if (0 != config.ext.write_up (config.ext.class_ptr, wordaddr, mask, val,`
334			`4))`
335	93	jeremybenn	`{`
336			`fprintf (stderr, "Warning: external half word write failed.\n");`
337			`}`
338	19	jeremybenn	`}`
339	93	jeremybenn	`} /* generic_write_hw() */`
340	19	jeremybenn
341
342	93	jeremybenn	`/* --------------------------------------------------------------------------*/`
343			`/*!Read a full word from an external device`
344
345			`Since this is a full word, the result must be converted to host endianess.`
346
347			`@note We are passed the device address, but we must convert it to a full`
348			`address for external use, to allow the single upcall handler to`
349			`decode multiple generic devices.`
350
351			`@param[in] addr The device address to read from (host endian).`
352			`@param[in] dat The device data structure.`
353
354			`@return The full word read (host endian). */`
355			`/* --------------------------------------------------------------------------*/`
356	19	jeremybenn	`static uint32_t`
357	93	jeremybenn	`generic_read_word (oraddr_t addr,`
358			`void *dat)`
359	19	jeremybenn	`{`
360			`struct dev_generic dev = (struct dev_generic ) dat;`
361
362	93	jeremybenn	`if (!config.ext.read_up)`
363	19	jeremybenn	`{`
364			`fprintf (stderr, "Full word read from disabled generic device\n");`
365			`return 0;`
366			`}`
367			`else if (addr >= dev->size)`
368			`{`
369			`fprintf (stderr, "Full word read out of range for generic device %s "`
370			`"(addr %" PRIxADDR ")\n", dev->name, addr);`
371			`return 0;`
372			`}`
373			`else if (0 != (addr & 0x3))`
374			`{`
375			`fprintf (stderr,`
376			`"Unaligned full word read from 0x%" PRIxADDR " ignored\n",`
377			`addr);`
378			`return 0;`
379			`}`
380			`else`
381			`{`
382	93	jeremybenn	`unsigned long int wordaddr = (unsigned long int) (addr + dev->baseaddr);`
383	19	jeremybenn
384	93	jeremybenn	`unsigned char mask[4];`
385			`unsigned char res[4];`
386
387			`/* Set the mask, read and get the result */`
388			`memset (mask, 0xff, sizeof (mask));`
389
390	101	jeremybenn	`if (0 != config.ext.read_up (config.ext.class_ptr, wordaddr, mask, res,`
391			`4))`
392	93	jeremybenn	`{`
393			`fprintf (stderr, "Warning: external full word read failed.\n");`
394			`return 0;`
395			`}`
396
397			`/* Result converted according to endianess */`
398			`#ifdef OR32_BIG_ENDIAN`
399			`return (unsigned long int) res[0] << 24 \|`
400			`(unsigned long int) res[1] << 16 \|`
401			`(unsigned long int) res[2] << 8 \|`
402			`(unsigned long int) res[3];`
403			`#else`
404			`return (unsigned long int) res[3] << 24 \|`
405			`(unsigned long int) res[2] << 16 \|`
406			`(unsigned long int) res[1] << 8 \|`
407			`(unsigned long int) res[0];`
408			`#endif`
409	19	jeremybenn	`}`
410	93	jeremybenn	`} /* generic_read_word() */`
411	19	jeremybenn
412
413	93	jeremybenn	`/* --------------------------------------------------------------------------*/`
414			`/*!Write a full word to an external device`
415
416			`Since this is a half word, the value must be converted from host endianess.`
417
418			`@note We are passed the device address, but we must convert it to a full`
419			`address for external use, to allow the single upcall handler to`
420			`decode multiple generic devices.`
421
422			`@param[in] addr The device address to write to (host endian).`
423			`@param[in] value The full word value to write (host endian).`
424			`@param[in] dat The device data structure. */`
425			`/* --------------------------------------------------------------------------*/`
426	19	jeremybenn	`static void`
427	93	jeremybenn	`generic_write_word (oraddr_t addr,`
428			`uint32_t value,`
429			`void *dat)`
430	19	jeremybenn	`{`
431			`struct dev_generic dev = (struct dev_generic ) dat;`
432
433	93	jeremybenn	`if (!config.ext.write_up)`
434	19	jeremybenn	`{`
435			`fprintf (stderr, "Full word write to disabled generic device\n");`
436			`}`
437			`else if (addr >= dev->size)`
438			`{`
439			`fprintf (stderr, "Full word written out of range for generic device %s "`
440			`"(addr %" PRIxADDR ")\n", dev->name, addr);`
441			`}`
442			`else if (0 != (addr & 0x3))`
443			`{`
444			`fprintf (stderr,`
445			`"Unaligned full word write to 0x%" PRIxADDR " ignored\n", addr);`
446			`}`
447			`else`
448			`{`
449	93	jeremybenn	`unsigned long int wordaddr = (unsigned long int) (addr + dev->baseaddr);`
450	19	jeremybenn
451	93	jeremybenn	`unsigned char mask[4];`
452			`unsigned char val[4];`
453
454			`/* Set the mask and write data do the write. */`
455			`memset (mask, 0xff, sizeof (mask));`
456
457			`/* Value converted according to endianess */`
458			`#ifdef OR32_BIG_ENDIAN`
459			`val[0] = (unsigned char) (value >> 24);`
460			`val[1] = (unsigned char) (value >> 16);`
461			`val[2] = (unsigned char) (value >> 8);`
462			`val[3] = (unsigned char) (value );`
463			`#else`
464			`val[3] = (unsigned char) (value >> 24);`
465			`val[2] = (unsigned char) (value >> 16);`
466			`val[1] = (unsigned char) (value >> 8);`
467			`val[0] = (unsigned char) (value );`
468			`#endif`
469
470	101	jeremybenn	`if (0 != config.ext.write_up (config.ext.class_ptr, wordaddr, mask, val,`
471			`4))`
472	93	jeremybenn	`{`
473			`fprintf (stderr, "Warning: external full word write failed.\n");`
474			`}`
475	19	jeremybenn	`}`
476	93	jeremybenn	`} /* generic_write_word() */`
477	19	jeremybenn
478
479			`/* Reset is a null operation */`
480
481			`static void`
482			`generic_reset (void *dat)`
483			`{`
484			`return;`
485
486			`} /* generic_reset() */`
487
488
489			`/* Status report can only advise of configuration. */`
490
491			`static void`
492			`generic_status (void *dat)`
493			`{`
494			`struct dev_generic dev = (struct dev_generic ) dat;`
495
496			`PRINTF ("\nGeneric device \"%s\" at 0x%" PRIxADDR ":\n", dev->name,`
497			`dev->baseaddr);`
498			`PRINTF (" Size 0x%" PRIx32 "\n", dev->size);`
499
500			`if (dev->byte_enabled)`

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1ksim/] [peripheral/] [generic.c] - Blame information for rev 855