Subversion Repositories openrisc

/* gpio.h -- GPIO code simulation

   Copyright (C) 2001 Erez Volk, erez@mailandnews.comopencores.org

   Copyright (C) 2008 Embecosm Limited

   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>

   This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.

   This program is free software; you can redistribute it and/or modify it

   under the terms of the GNU General Public License as published by the Free

   Software Foundation; either version 3 of the License, or (at your option)

   any later version.

   This program is distributed in the hope that it will be useful, but WITHOUT

   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

   more details.

   You should have received a copy of the GNU General Public License along

   with this program.  If not, see <http://www.gnu.org/licenses/>.  */

/* This program is commented throughout in a fashion suitable for processing

   with Doxygen. */

/* Autoconf and/or portability configuration */

#include "config.h"

#include "port.h"

/* System includes */

#include <stdlib.h>

/* Package includes */

#include "sim-config.h"

#include "arch.h"

#include "vapi.h"

#include "sched.h"

#include "pic.h"

#include "abstract.h"

#include "toplevel-support.h"

#include "sim-cmd.h"

#include "gpio.h"

/*

 * The various VAPI IDs each GPIO device has

 */

enum

{ GPIO_VAPI_DATA = 0,

  GPIO_VAPI_AUX,

  GPIO_VAPI_CLOCK,

  GPIO_VAPI_RGPIO_OE,

  GPIO_VAPI_RGPIO_INTE,

  GPIO_VAPI_RGPIO_PTRIG,

  GPIO_VAPI_RGPIO_AUX,

  GPIO_VAPI_RGPIO_CTRL,

  GPIO_NUM_VAPI_IDS

};

/*

 * Implementatino of GPIO Code Registers and State

 */

struct gpio_device

{

  /* Is peripheral enabled */

  int enabled;

  /* Base address in memory */

  oraddr_t baseaddr;

  /* Which IRQ to generate */

  int irq;

  /* Which GPIO is this? */

  unsigned gpio_number;

  /* VAPI IDs */

  unsigned long base_vapi_id;

  /* Auxiliary inputs */

  unsigned long auxiliary_inputs;

  /* Visible registers */

  struct

  {

    unsigned long in;

    unsigned long out;

    unsigned long oe;

    unsigned long inte;

    unsigned long ptrig;

    unsigned long aux;

    unsigned long ctrl;

    unsigned long ints;

    int external_clock;

  } curr, next;

};

static void gpio_vapi_read (unsigned long id, unsigned long data, void *dat);

static void gpio_external_clock (unsigned long value,

                                 struct gpio_device *gpio);

static void gpio_device_clock (struct gpio_device *gpio);

static void gpio_clock (void *dat);

/* Initialize all parameters and state */

static void

gpio_reset (void *dat)

{

  struct gpio_device *gpio = dat;

  if (gpio->baseaddr != 0)

    {

      /* Possibly connect to VAPI */

      if (gpio->base_vapi_id)

        {

          vapi_install_multi_handler (gpio->base_vapi_id, GPIO_NUM_VAPI_IDS,

                                      gpio_vapi_read, dat);

        }

    }

  SCHED_ADD (gpio_clock, dat, 1);

}

/* Dump status */

static void

gpio_status (void *dat)

{

  struct gpio_device *gpio = dat;

  if (gpio->baseaddr == 0)

    return;

  PRINTF ("\nGPIO at 0x%" PRIxADDR ":\n", gpio->baseaddr);

  PRINTF ("RGPIO_IN     : 0x%08lX\n", gpio->curr.in);

  PRINTF ("RGPIO_OUT    : 0x%08lX\n", gpio->curr.out);

  PRINTF ("RGPIO_OE     : 0x%08lX\n", gpio->curr.oe);

  PRINTF ("RGPIO_INTE   : 0x%08lX\n", gpio->curr.inte);

  PRINTF ("RGPIO_PTRIG  : 0x%08lX\n", gpio->curr.ptrig);

  PRINTF ("RGPIO_AUX    : 0x%08lX\n", gpio->curr.aux);

  PRINTF ("RGPIO_CTRL   : 0x%08lX\n", gpio->curr.ctrl);

  PRINTF ("RGPIO_INTS   : 0x%08lX\n", gpio->curr.ints);

}

/* Wishbone read */

static uint32_t

gpio_read32 (oraddr_t addr, void *dat)

{

  struct gpio_device *gpio = dat;

  switch (addr)

    {

    case RGPIO_IN:

      return gpio->curr.in | gpio->curr.out;

    case RGPIO_OUT:

      return gpio->curr.out;

    case RGPIO_OE:

      return gpio->curr.oe;

    case RGPIO_INTE:

      return gpio->curr.inte;

    case RGPIO_PTRIG:

      return gpio->curr.ptrig;

    case RGPIO_AUX:

      return gpio->curr.aux;

    case RGPIO_CTRL:

      return gpio->curr.ctrl;

    case RGPIO_INTS:

      return gpio->curr.ints;

    }

  return 0;

}

/* Wishbone write */

static void

gpio_write32 (oraddr_t addr, uint32_t value, void *dat)

{

  struct gpio_device *gpio = dat;

  switch (addr)

    {

    case RGPIO_IN:

      break;

    case RGPIO_OUT:

      gpio->next.out = value;

      break;

    case RGPIO_OE:

      gpio->next.oe = value;

      break;

    case RGPIO_INTE:

      gpio->next.inte = value;

      break;

    case RGPIO_PTRIG:

      gpio->next.ptrig = value;

      break;

    case RGPIO_AUX:

      gpio->next.aux = value;

      break;

    case RGPIO_CTRL:

      gpio->next.ctrl = value;

      break;

    case RGPIO_INTS:

      if (gpio->next.ints && !value)

        clear_interrupt (gpio->irq);

      gpio->next.ints = value;

      break;

    }

}

/* Input from "outside world" */

static void

gpio_vapi_read (unsigned long id, unsigned long data, void *dat)

{

  unsigned which;

  struct gpio_device *gpio = dat;

  which = id - gpio->base_vapi_id;

  switch (which)

    {

    case GPIO_VAPI_DATA:

      gpio->next.in = data;

      break;

    case GPIO_VAPI_AUX:

      gpio->auxiliary_inputs = data;

      break;

    case GPIO_VAPI_RGPIO_OE:

      gpio->next.oe = data;

      break;

    case GPIO_VAPI_RGPIO_INTE:

      gpio->next.inte = data;

      break;

    case GPIO_VAPI_RGPIO_PTRIG:

      gpio->next.ptrig = data;

      break;

    case GPIO_VAPI_RGPIO_AUX:

      gpio->next.aux = data;

      break;

    case GPIO_VAPI_RGPIO_CTRL:

      gpio->next.ctrl = data;

      break;

    case GPIO_VAPI_CLOCK:

      gpio_external_clock (data, gpio);

      break;

    }

}

/* System Clock. */

static void

gpio_clock (void *dat)

{

  struct gpio_device *gpio = dat;

  /* Clock the device */

  if (!(gpio->curr.ctrl & RGPIO_CTRL_ECLK))

    gpio_device_clock (gpio);

  SCHED_ADD (gpio_clock, dat, 1);

}

/* External Clock. */

static void

gpio_external_clock (unsigned long value, struct gpio_device *gpio)

{

  int use_external_clock =

    ((gpio->curr.ctrl & RGPIO_CTRL_ECLK) == RGPIO_CTRL_ECLK);

  int negative_edge = ((gpio->curr.ctrl & RGPIO_CTRL_NEC) == RGPIO_CTRL_NEC);

  /* "Normalize" clock value */

  value = (value != 0);

  gpio->next.external_clock = value;

  if (use_external_clock

      && (gpio->next.external_clock != gpio->curr.external_clock)

      && (value != negative_edge))

    /* Make sure that in vapi_read, we don't clock the device */

    if (gpio->curr.ctrl & RGPIO_CTRL_ECLK)

      gpio_device_clock (gpio);

}

/* Report an interrupt to the sim */

static void

gpio_do_int (void *dat)

{

  struct gpio_device *gpio = dat;

  report_interrupt (gpio->irq);

}

/* Clock as handld by one device. */

static void

gpio_device_clock (struct gpio_device *gpio)

{

  /* Calculate new inputs and outputs */

  gpio->next.in &= ~gpio->next.oe;      /* Only input bits */

  /* Replace requested output bits with aux input */

  gpio->next.out =

    (gpio->next.out & ~gpio->next.aux) | (gpio->auxiliary_inputs & gpio->next.

                                          aux);

  gpio->next.out &= gpio->next.oe;      /* Only output-enabled bits */

  /* If any outputs changed, notify the world (i.e. vapi) */

  if (gpio->next.out != gpio->curr.out)

    {

      if (gpio->base_vapi_id)

        vapi_send (gpio->base_vapi_id + GPIO_VAPI_DATA, gpio->next.out);

    }

  /* If any inputs changed and interrupt enabled, generate interrupt */

  if (gpio->next.in != gpio->curr.in)

    {

      if (gpio->next.ctrl & RGPIO_CTRL_INTE)

        {

          unsigned changed_bits = gpio->next.in ^ gpio->curr.in;        /* inputs that have changed */

          unsigned set_bits = changed_bits & gpio->next.in;     /* inputs that have been set */

          unsigned cleared_bits = changed_bits & gpio->curr.in; /* inputs that have been cleared */

          unsigned relevant_bits =

            (gpio->next.ptrig & set_bits) | (~gpio->next.

                                             ptrig & cleared_bits);

          if (relevant_bits & gpio->next.inte)

            {

              gpio->next.ctrl |= RGPIO_CTRL_INTS;

              gpio->next.ints |= relevant_bits & gpio->next.inte;

              /* Since we can't report an interrupt during a readmem/writemem

               * schedule the scheduler to do it.  Read the comment above

               * report_interrupt in pic/pic.c */

              SCHED_ADD (gpio_do_int, gpio, 1);

            }

        }

    }

  /* Switch to values for next clock */

  memcpy (&(gpio->curr), &(gpio->next), sizeof (gpio->curr));

}

/*---------------------------------------------------[ GPIO configuration ]---*/

static void

gpio_baseaddr (union param_val val, void *dat)

{

  struct gpio_device *gpio = dat;

  gpio->baseaddr = val.addr_val;

}

static void

gpio_irq (union param_val val, void *dat)

{

  struct gpio_device *gpio = dat;

  gpio->irq = val.int_val;

}

static void

gpio_base_vapi_id (union param_val val, void *dat)

{

  struct gpio_device *gpio = dat;

  gpio->base_vapi_id = val.int_val;

}

static void

gpio_enabled (union param_val val, void *dat)

{

  struct gpio_device *gpio = dat;

  gpio->enabled = val.int_val;

}

static void *

gpio_sec_start (void)

{

  struct gpio_device *new = malloc (sizeof (struct gpio_device));

  if (!new)

    {

      fprintf (stderr, "Peripheral gpio: Run out of memory\n");

      exit (-1);

    }

  new->auxiliary_inputs = 0;

  memset (&new->curr, 0, sizeof (new->curr));

  memset (&new->next, 0, sizeof (new->next));

  new->enabled = 1;

  new->baseaddr = 0;

  new->irq = 0;

  new->base_vapi_id = 0;

  return new;

}

static void

gpio_sec_end (void *dat)

{

  struct gpio_device *gpio = dat;

  struct mem_ops ops;

  if (!gpio->enabled)

    {

      free (dat);

      return;

    }

  memset (&ops, 0, sizeof (struct mem_ops));

  ops.readfunc32 = gpio_read32;

  ops.writefunc32 = gpio_write32;

  ops.write_dat32 = dat;

  ops.read_dat32 = dat;

  /* FIXME: Correct delays? */

  ops.delayr = 2;

  ops.delayw = 2;

  /* Register memory range */

  reg_mem_area (gpio->baseaddr, GPIO_ADDR_SPACE, 0, &ops);

  reg_sim_reset (gpio_reset, dat);

  reg_sim_stat (gpio_status, dat);

}

void

reg_gpio_sec (void)

{

  struct config_section *sec =

    reg_config_sec ("gpio", gpio_sec_start, gpio_sec_end);

  reg_config_param (sec, "enabled",      PARAMT_INT, gpio_enabled);

  reg_config_param (sec, "baseaddr",     PARAMT_ADDR, gpio_baseaddr);

  reg_config_param (sec, "irq",          PARAMT_INT, gpio_irq);

  reg_config_param (sec, "vapi_id",      PARAMT_INT, gpio_base_vapi_id);

  reg_config_param (sec, "base_vapi_id", PARAMT_INT, gpio_base_vapi_id);

}