Subversion Repositories openrisc_me

/* pic.c -- Simulation of OpenRISC 1000 programmable interrupt controller

   Copyright (C) 1999 Damjan Lampret, lampret@opencores.org

   Copyright (C) 2008 Embecosm Limited

   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>

   This file is part of OpenRISC 1000 Architectural Simulator.

   This program is free software; you can redistribute it and/or modify it

   under the terms of the GNU General Public License as published by the Free

   Software Foundation; either version 3 of the License, or (at your option)

   any later version.

   This program is distributed in the hope that it will be useful, but WITHOUT

   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

   more details.

   You should have received a copy of the GNU General Public License along

   with this program.  If not, see <http://www.gnu.org/licenses/>. */

/* This program is commented throughout in a fashion suitable for processing

   with Doxygen. */

/* Autoconf and/or portability configuration */

#include "config.h"

#include "port.h"

/* System includes */

#include <stdlib.h>

#include <stdio.h>

/* Package includes */

#include "arch.h"

#include "abstract.h"

#include "pic.h"

#include "opcode/or32.h"

#include "spr-defs.h"

#include "execute.h"

#include "except.h"

#include "sprs.h"

#include "sim-config.h"

#include "sched.h"

/* FIXME: This ugly hack will be removed once the bus architecture gets written

 */

struct pic pic_state_int = { 1, 1 };

struct pic *pic_state = &pic_state_int;

/* Reset. It initializes PIC registers. */

void

pic_reset (void)

{

  PRINTF ("Resetting PIC.\n");

  cpu_state.sprs[SPR_PICMR] = 0;

  cpu_state.sprs[SPR_PICPR] = 0;

  cpu_state.sprs[SPR_PICSR] = 0;

}

/* Handles the reporting of an interrupt if it had to be delayed */

static void

pic_rep_int (void *dat)

{

  if (cpu_state.sprs[SPR_PICSR])

    {

      except_handle (EXCEPT_INT, cpu_state.sprs[SPR_EEAR_BASE]);

    }

}

/* Called whenever interrupts get enabled */

void

pic_ints_en (void)

{

  if ((cpu_state.sprs[SPR_PICMR] & cpu_state.sprs[SPR_PICSR]))

    SCHED_ADD (pic_rep_int, NULL, 0);

}

/* Asserts interrupt to the PIC. */

/* WARNING: If this is called during a simulated instruction (ie. from a read/

 * write mem callback), the interrupt will be delivered after the instruction

 * has finished executeing */

void

report_interrupt (int line)

{

  uint32_t lmask = 1 << line;

  /* Disable doze and sleep mode */

  cpu_state.sprs[SPR_PMR] &= ~(SPR_PMR_DME | SPR_PMR_SME);

  /* If PIC is disabled, don't set any register, just raise EXCEPT_INT */

  if (!config.pic.enabled)

    {

      if (cpu_state.sprs[SPR_SR] & SPR_SR_IEE)

        except_handle (EXCEPT_INT, cpu_state.sprs[SPR_EEAR_BASE]);

      return;

    }

  if (cpu_state.pic_lines & lmask)

    {

      /* No edge occured, warn about performance penalty and exit */

      fprintf (stderr, "Warning: Int line %d did not change state\n", line);

      return;

    }

  cpu_state.pic_lines |= lmask;

  cpu_state.sprs[SPR_PICSR] |= lmask;

  if ((cpu_state.sprs[SPR_PICMR] & lmask) || line < 2)

    if (cpu_state.sprs[SPR_SR] & SPR_SR_IEE)

      SCHED_ADD (pic_rep_int, NULL, 0);

}

/* Clears an int on a pic line */

void

clear_interrupt (int line)

{

  cpu_state.pic_lines &= ~(1 << line);

  if (!config.pic.edge_trigger)

    cpu_state.sprs[SPR_PICSR] &= ~(1 << line);

}

/*----------------------------------------------------[ PIC configuration ]---*/

/*---------------------------------------------------------------------------*/

/*!Enable or disable the programmable interrupt controller

   Set the corresponding field in the UPR

   @param[in] val  The value to use

   @param[in] dat  The config data structure (not used here)                 */

/*---------------------------------------------------------------------------*/

static void

pic_enabled (union param_val  val,

             void            *dat)

{

  if (val.int_val)

    {

      cpu_state.sprs[SPR_UPR] |= SPR_UPR_PICP;

    }

  else

    {

      cpu_state.sprs[SPR_UPR] &= ~SPR_UPR_PICP;

    }

  config.pic.enabled = val.int_val;

}       /* pic_enabled() */

/*---------------------------------------------------------------------------*/

/*!Enable or disable edge triggering of interrupts

   @param[in] val  The value to use

   @param[in] dat  The config data structure (not used here)                 */

/*---------------------------------------------------------------------------*/

static void

pic_edge_trigger (union param_val  val,

                  void            *dat)

{

  config.pic.edge_trigger = val.int_val;

}       /* pic_edge_trigger() */

/*---------------------------------------------------------------------------*/

/*!Initialize a new interrupt controller configuration

   ALL parameters are set explicitly to default values in init_defconfig()   */

/*---------------------------------------------------------------------------*/

void

reg_pic_sec ()

{

  struct config_section *sec = reg_config_sec ("pic", NULL, NULL);

  reg_config_param (sec, "enabled",      paramt_int, pic_enabled);

  reg_config_param (sec, "edge_trigger", paramt_int, pic_edge_trigger);

}       /* reg_pic_sec() */