1 |
98 |
jeremybenn |
# jtag-go-command-read.exp. Tests of the library JTAG GO_COMMAND for reading
|
2 |
|
|
|
3 |
|
|
# Copyright (C) 2010 Embecosm Limited
|
4 |
|
|
|
5 |
|
|
# Contributor Jeremy Bennett
|
6 |
|
|
|
7 |
|
|
# This file is part of OpenRISC 1000 Architectural Simulator.
|
8 |
|
|
|
9 |
|
|
# This program is free software; you can redistribute it and/or modify it
|
10 |
|
|
# under the terms of the GNU General Public License as published by the Free
|
11 |
|
|
# Software Foundation; either version 3 of the License, or (at your option)
|
12 |
|
|
# any later version.
|
13 |
|
|
|
14 |
|
|
# This program is distributed in the hope that it will be useful, but WITHOUT
|
15 |
|
|
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
16 |
|
|
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
17 |
|
|
# more details.
|
18 |
|
|
|
19 |
|
|
# You should have received a copy of the GNU General Public License along
|
20 |
|
|
# with this program. If not, see . */
|
21 |
|
|
|
22 |
|
|
# -----------------------------------------------------------------------------
|
23 |
|
|
# This code is commented throughout for use with Doxygen.
|
24 |
|
|
# -----------------------------------------------------------------------------
|
25 |
|
|
|
26 |
|
|
|
27 |
|
|
# These tests check all the behavior associated with the JTAG GO_COMMAND when
|
28 |
|
|
# reading.
|
29 |
|
|
|
30 |
|
|
# NOTE. All these tests return timing information, but we ignore it, since in
|
31 |
|
|
# general it will not be repeatable.
|
32 |
|
|
|
33 |
|
|
# Tests of the GO_COMMAND for reading from different modules. This should work
|
34 |
|
|
# fine for Wishbone and CPU0. Other modules will have been weeded out by the
|
35 |
|
|
# prior WRITE_COMMAND. We specify 4 bytes to read each time.
|
36 |
|
|
|
37 |
|
|
# We use the loop-init OpenRISC program here, since we must be sure that
|
38 |
|
|
# defined values are placed in the various read targets. As SPR's we use MACLO
|
39 |
|
|
# (0x2801) and MACHI (0x2802), which are initialized to 0xdeadbeef and
|
40 |
|
|
# 0xcafebabe respectively (but remember Or1ksim is by default BIG_ENDIAN when
|
41 |
|
|
# reading the results). As Wishbone we use address 0x100000, which is
|
42 |
|
|
# initialized to 0x10111213.
|
43 |
|
|
|
44 |
|
|
# When testing GO_COMMAND (read) after invalid module selection, we cannot
|
45 |
|
|
# guarantee a CRC mismatch (or at least I can't do the maths to prove that no
|
46 |
|
|
# register of all zeros can have a valid CRC field for the possible GO_COMMAND
|
47 |
|
|
# register lengths, although it is highly likely), so we just look for the
|
48 |
|
|
# error message.
|
49 |
|
|
|
50 |
|
|
# GO_COMMAND reading with no module selection (address 0x100000).
|
51 |
|
|
run_libsim "JTAG GO_COMMAND (read) no module" \
|
52 |
|
|
[list "Initalization succeeded." \
|
53 |
|
|
"Execution step completed OK." \
|
54 |
|
|
"Resetting JTAG." \
|
55 |
|
|
"Execution step completed OK." \
|
56 |
|
|
"Shifting instruction." \
|
57 |
|
|
" shifting in: 0x01" \
|
58 |
|
|
" shifted out: 0x01" \
|
59 |
|
|
" time taken: " \
|
60 |
|
|
"Execution step completed OK." \
|
61 |
|
|
"Processing WRITE_COMMAND." \
|
62 |
|
|
" shifting in: 0x00000000001039e5cf800000001000c8" \
|
63 |
|
|
"ERROR: JTAG WRITE_COMMAND with no module selected." \
|
64 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
65 |
|
|
" status: 0x0" \
|
66 |
|
|
" time taken:" \
|
67 |
|
|
"Execution step completed OK." \
|
68 |
|
|
"Processing GO_COMMAND_READ." \
|
69 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
70 |
|
|
"ERROR: JTAG GO_COMMAND with no prior WRITE_COMMAND." \
|
71 |
|
|
" shifted out: 0x0000000000000000000000000000" \
|
72 |
|
|
" data: 00000000" \
|
73 |
|
|
" status: 0x0" \
|
74 |
|
|
" time taken:" \
|
75 |
|
|
"Execution step completed OK." \
|
76 |
|
|
"Test completed successfully."] \
|
77 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
78 |
|
|
"8" "WRITE_COMMAND" "6" "100000" "4" "GO_COMMAND_READ" "4"
|
79 |
|
|
|
80 |
|
|
# GO_COMMAND reading with only invalid module selected.
|
81 |
|
|
run_libsim "JTAG GO_COMMAND (read) invalid module" \
|
82 |
|
|
[list "Initalization succeeded." \
|
83 |
|
|
"Execution step completed OK." \
|
84 |
|
|
"Resetting JTAG." \
|
85 |
|
|
"Execution step completed OK." \
|
86 |
|
|
"Shifting instruction." \
|
87 |
|
|
" shifting in: 0x01" \
|
88 |
|
|
" shifted out: 0x01" \
|
89 |
|
|
" time taken:" \
|
90 |
|
|
"Execution step completed OK." \
|
91 |
|
|
"Selecting module." \
|
92 |
|
|
" shifting in: 0x00000000001993c98e69" \
|
93 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
94 |
|
|
" status: 0x0" \
|
95 |
|
|
" time taken:" \
|
96 |
|
|
"Execution step completed OK." \
|
97 |
|
|
"Processing WRITE_COMMAND." \
|
98 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
99 |
|
|
"ERROR: JTAG WRITE_COMMAND for CPU1 not supported." \
|
100 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
101 |
|
|
" status: 0x0" \
|
102 |
|
|
" time taken:" \
|
103 |
|
|
"Execution step completed OK." \
|
104 |
|
|
"Processing GO_COMMAND_READ." \
|
105 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
106 |
|
|
"ERROR: JTAG GO_COMMAND with no prior WRITE_COMMAND." \
|
107 |
|
|
" shifted out: 0x0000000000000000000000000000" \
|
108 |
|
|
" data: 00000000" \
|
109 |
|
|
" status: 0x0" \
|
110 |
|
|
" time taken:" \
|
111 |
|
|
"Execution step completed OK." \
|
112 |
|
|
"Test completed successfully."] \
|
113 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
114 |
|
|
"8" "SELECT_MODULE" "2" "WRITE_COMMAND" "6" "2801" "4" \
|
115 |
|
|
"GO_COMMAND_READ" "4"
|
116 |
|
|
|
117 |
|
|
# GO_COMMAND reading with invalid module selected after valid module
|
118 |
|
|
run_libsim "JTAG GO_COMMAND (read) invalid after valid module" \
|
119 |
|
|
[list "Initalization succeeded." \
|
120 |
|
|
"Execution step completed OK." \
|
121 |
|
|
"Resetting JTAG." \
|
122 |
|
|
"Execution step completed OK." \
|
123 |
|
|
"Shifting instruction." \
|
124 |
|
|
" shifting in: 0x01" \
|
125 |
|
|
" shifted out: 0x01" \
|
126 |
|
|
" time taken:" \
|
127 |
|
|
"Execution step completed OK." \
|
128 |
|
|
"Selecting module." \
|
129 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
130 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
131 |
|
|
" status: 0x0" \
|
132 |
|
|
" time taken:" \
|
133 |
|
|
"Execution step completed OK." \
|
134 |
|
|
"Selecting module." \
|
135 |
|
|
" shifting in: 0x00000000001efe0d976d" \
|
136 |
|
|
" shifted out: 0x01893c98e68000000000" \
|
137 |
|
|
" status: 0x2" \
|
138 |
|
|
" time taken:" \
|
139 |
|
|
"Execution step completed OK." \
|
140 |
|
|
"Processing WRITE_COMMAND." \
|
141 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
142 |
|
|
"ERROR: JTAG WRITE_COMMAND with no module selected." \
|
143 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
144 |
|
|
" status: 0x0" \
|
145 |
|
|
" time taken:" \
|
146 |
|
|
"Execution step completed OK." \
|
147 |
|
|
"Processing GO_COMMAND_READ." \
|
148 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
149 |
|
|
"ERROR: JTAG GO_COMMAND with no prior WRITE_COMMAND." \
|
150 |
|
|
" shifted out: 0x0000000000000000000000000000" \
|
151 |
|
|
" data: 00000000" \
|
152 |
|
|
" status: 0x0" \
|
153 |
|
|
" time taken:" \
|
154 |
|
|
"Execution step completed OK." \
|
155 |
|
|
"Test completed successfully."] \
|
156 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
157 |
|
|
"8" "SELECT_MODULE" "0" "SELECT_MODULE" "6" "WRITE_COMMAND" "6" \
|
158 |
|
|
"2801" "4" "GO_COMMAND_READ" "4"
|
159 |
|
|
|
160 |
|
|
# GO_COMMAND reading with valid module selected after invalid module
|
161 |
|
|
run_libsim "JTAG GO_COMMAND (read) valid after invalid module" \
|
162 |
|
|
[list "Initalization succeeded." \
|
163 |
|
|
"Execution step completed OK." \
|
164 |
|
|
"Resetting JTAG." \
|
165 |
|
|
"Execution step completed OK." \
|
166 |
|
|
"Shifting instruction." \
|
167 |
|
|
" shifting in: 0x01" \
|
168 |
|
|
" shifted out: 0x01" \
|
169 |
|
|
" time taken:" \
|
170 |
|
|
"Execution step completed OK." \
|
171 |
|
|
"Selecting module." \
|
172 |
|
|
" shifting in: 0x00000000001efe0d976d" \
|
173 |
|
|
" shifted out: 0x01893c98e68000000000" \
|
174 |
|
|
" status: 0x2" \
|
175 |
|
|
" time taken:" \
|
176 |
|
|
"Execution step completed OK." \
|
177 |
|
|
"Selecting module." \
|
178 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
179 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
180 |
|
|
" status: 0x0" \
|
181 |
|
|
" time taken:" \
|
182 |
|
|
"Execution step completed OK." \
|
183 |
|
|
"Processing WRITE_COMMAND." \
|
184 |
|
|
" shifting in: 0x00000000001039e5cf800000001000c8" \
|
185 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
186 |
|
|
" status: 0x0" \
|
187 |
|
|
" time taken:" \
|
188 |
|
|
"Execution step completed OK." \
|
189 |
|
|
"Processing GO_COMMAND_READ." \
|
190 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
191 |
|
|
" shifted out: 0x019de5beae190911010000000000" \
|
192 |
|
|
" data: 10111213" \
|
193 |
|
|
" status: 0x0" \
|
194 |
|
|
" time taken:" \
|
195 |
|
|
"Execution step completed OK." \
|
196 |
|
|
"Test completed successfully."] \
|
197 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
198 |
|
|
"8" "SELECT_MODULE" "6" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" \
|
199 |
|
|
"100000" "4" "GO_COMMAND_READ" "4"
|
200 |
|
|
|
201 |
|
|
# Verify that reading works correctly from both valid modules, WishBone and
|
202 |
|
|
# CPU0.
|
203 |
|
|
|
204 |
|
|
# GO_COMMAND reading for Wishbone (address 0x100000).
|
205 |
|
|
run_libsim "JTAG SELECT_MODULE GO_COMMAND (read) WB" \
|
206 |
|
|
[list "Initalization succeeded." \
|
207 |
|
|
"Execution step completed OK." \
|
208 |
|
|
"Resetting JTAG." \
|
209 |
|
|
"Execution step completed OK." \
|
210 |
|
|
"Shifting instruction." \
|
211 |
|
|
" shifting in: 0x01" \
|
212 |
|
|
" shifted out: 0x01" \
|
213 |
|
|
" time taken: " \
|
214 |
|
|
"Execution step completed OK." \
|
215 |
|
|
"Selecting module." \
|
216 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
217 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
218 |
|
|
" status: 0x0" \
|
219 |
|
|
" time taken:" \
|
220 |
|
|
"Execution step completed OK." \
|
221 |
|
|
"Processing WRITE_COMMAND." \
|
222 |
|
|
" shifting in: 0x00000000001039e5cf800000001000c8" \
|
223 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
224 |
|
|
" status: 0x0" \
|
225 |
|
|
" time taken:" \
|
226 |
|
|
"Execution step completed OK." \
|
227 |
|
|
"Processing GO_COMMAND_READ." \
|
228 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
229 |
|
|
" shifted out: 0x019de5beae190911010000000000" \
|
230 |
|
|
" data: 10111213" \
|
231 |
|
|
" status: 0x0" \
|
232 |
|
|
" time taken:" \
|
233 |
|
|
"Execution step completed OK." \
|
234 |
|
|
"Test completed successfully."] \
|
235 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
236 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "4" \
|
237 |
|
|
"GO_COMMAND_READ" "4"
|
238 |
|
|
|
239 |
|
|
# GO_COMMAND reading for CPU0 (address 0x2081, MACLO).
|
240 |
|
|
run_libsim "JTAG SELECT_MODULE GO_COMMAND (read) CPU0" \
|
241 |
|
|
[list "Initalization succeeded." \
|
242 |
|
|
"Execution step completed OK." \
|
243 |
|
|
"Resetting JTAG." \
|
244 |
|
|
"Execution step completed OK." \
|
245 |
|
|
"Shifting instruction." \
|
246 |
|
|
" shifting in: 0x01" \
|
247 |
|
|
" shifted out: 0x01" \
|
248 |
|
|
" time taken:" \
|
249 |
|
|
"Execution step completed OK." \
|
250 |
|
|
"Selecting module." \
|
251 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
252 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
253 |
|
|
" status: 0x0" \
|
254 |
|
|
" time taken:" \
|
255 |
|
|
"Execution step completed OK." \
|
256 |
|
|
"Processing WRITE_COMMAND." \
|
257 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
258 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
259 |
|
|
" status: 0x0" \
|
260 |
|
|
" time taken:" \
|
261 |
|
|
"Execution step completed OK." \
|
262 |
|
|
"Processing GO_COMMAND_READ." \
|
263 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
264 |
|
|
" shifted out: 0x00b8e2228e0f76afbee000000000" \
|
265 |
|
|
" data: efbeadde" \
|
266 |
|
|
" status: 0x0" \
|
267 |
|
|
" time taken:" \
|
268 |
|
|
"Execution step completed OK." \
|
269 |
|
|
"Test completed successfully."] \
|
270 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
271 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4" \
|
272 |
|
|
"GO_COMMAND_READ" "4"
|
273 |
|
|
|
274 |
|
|
# Tests of GO_COMMAND_READ with different access alignments, boundaries and
|
275 |
|
|
# lengths for WishBone. For this we use the loop-init program, which has
|
276 |
|
|
# values initialized at 0x100000-0x10000f (values 0x10 through 0x1f
|
277 |
|
|
# respectively), 0x110000-0x11000f (values 0x20 through 0x2f respectively) and
|
278 |
|
|
# 0x120000-0x12000f (values 0x30 through 0x3f respectively).
|
279 |
|
|
|
280 |
|
|
# First check that a single aligned unit can be read for each access type at
|
281 |
|
|
# its allowed alignments.
|
282 |
|
|
|
283 |
|
|
# GO_COMMAND reading one byte for Wishbone aligned at byte 0.
|
284 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 byte, aligned byte 0" \
|
285 |
|
|
[list "Initalization succeeded." \
|
286 |
|
|
"Execution step completed OK." \
|
287 |
|
|
"Resetting JTAG." \
|
288 |
|
|
"Execution step completed OK." \
|
289 |
|
|
"Shifting instruction." \
|
290 |
|
|
" shifting in: 0x01" \
|
291 |
|
|
" shifted out: 0x01" \
|
292 |
|
|
" time taken:" \
|
293 |
|
|
"Execution step completed OK." \
|
294 |
|
|
"Selecting module." \
|
295 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
296 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
297 |
|
|
" status: 0x0" \
|
298 |
|
|
" time taken:" \
|
299 |
|
|
"Execution step completed OK." \
|
300 |
|
|
"Processing WRITE_COMMAND." \
|
301 |
|
|
" shifting in: 0x0000000001aee68a5c00000000100048" \
|
302 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
303 |
|
|
" status: 0x0" \
|
304 |
|
|
" time taken:" \
|
305 |
|
|
"Execution step completed OK." \
|
306 |
|
|
"Processing GO_COMMAND_READ." \
|
307 |
|
|
" shifting in: 0x000000000000169330ba20" \
|
308 |
|
|
" shifted out: 0x000464d308010000000000" \
|
309 |
|
|
" data: 10" \
|
310 |
|
|
" status: 0x0" \
|
311 |
|
|
" time taken:" \
|
312 |
|
|
"Execution step completed OK." \
|
313 |
|
|
"Test completed successfully."] \
|
314 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
315 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "1" \
|
316 |
|
|
"GO_COMMAND_READ" "1"
|
317 |
|
|
|
318 |
|
|
# GO_COMMAND reading one byte for Wishbone aligned at byte 1.
|
319 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 byte, aligned byte 1" \
|
320 |
|
|
[list "Initalization succeeded." \
|
321 |
|
|
"Execution step completed OK." \
|
322 |
|
|
"Resetting JTAG." \
|
323 |
|
|
"Execution step completed OK." \
|
324 |
|
|
"Shifting instruction." \
|
325 |
|
|
" shifting in: 0x01" \
|
326 |
|
|
" shifted out: 0x01" \
|
327 |
|
|
" time taken:" \
|
328 |
|
|
"Execution step completed OK." \
|
329 |
|
|
"Selecting module." \
|
330 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
331 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
332 |
|
|
" status: 0x0" \
|
333 |
|
|
" time taken:" \
|
334 |
|
|
"Execution step completed OK." \
|
335 |
|
|
"Processing WRITE_COMMAND." \
|
336 |
|
|
" shifting in: 0x00000000006c8cbd5c00010000100048" \
|
337 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
338 |
|
|
" status: 0x0" \
|
339 |
|
|
" time taken:" \
|
340 |
|
|
"Execution step completed OK." \
|
341 |
|
|
"Processing GO_COMMAND_READ." \
|
342 |
|
|
" shifting in: 0x000000000000169330ba20" \
|
343 |
|
|
" shifted out: 0x0019d3c36c110000000000" \
|
344 |
|
|
" data: 11" \
|
345 |
|
|
" status: 0x0" \
|
346 |
|
|
" time taken:" \
|
347 |
|
|
"Execution step completed OK." \
|
348 |
|
|
"Test completed successfully."] \
|
349 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
350 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100001" "1" \
|
351 |
|
|
"GO_COMMAND_READ" "1"
|
352 |
|
|
|
353 |
|
|
# GO_COMMAND reading one byte for Wishbone aligned at byte 2.
|
354 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 byte, aligned byte 2" \
|
355 |
|
|
[list "Initalization succeeded." \
|
356 |
|
|
"Execution step completed OK." \
|
357 |
|
|
"Resetting JTAG." \
|
358 |
|
|
"Execution step completed OK." \
|
359 |
|
|
"Shifting instruction." \
|
360 |
|
|
" shifting in: 0x01" \
|
361 |
|
|
" shifted out: 0x01" \
|
362 |
|
|
" time taken:" \
|
363 |
|
|
"Execution step completed OK." \
|
364 |
|
|
"Selecting module." \
|
365 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
366 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
367 |
|
|
" status: 0x0" \
|
368 |
|
|
" time taken:" \
|
369 |
|
|
"Execution step completed OK." \
|
370 |
|
|
"Processing WRITE_COMMAND." \
|
371 |
|
|
" shifting in: 0x00000000014fd391dc00008000100048" \
|
372 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
373 |
|
|
" status: 0x0" \
|
374 |
|
|
" time taken:" \
|
375 |
|
|
"Execution step completed OK." \
|
376 |
|
|
"Processing GO_COMMAND_READ." \
|
377 |
|
|
" shifting in: 0x000000000000169330ba20" \
|
378 |
|
|
" shifted out: 0x000abf5b3a090000000000" \
|
379 |
|
|
" data: 12" \
|
380 |
|
|
" status: 0x0" \
|
381 |
|
|
" time taken:" \
|
382 |
|
|
"Execution step completed OK." \
|
383 |
|
|
"Test completed successfully."] \
|
384 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
385 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100002" "1" \
|
386 |
|
|
"GO_COMMAND_READ" "1"
|
387 |
|
|
|
388 |
|
|
# GO_COMMAND reading one byte for Wishbone aligned at byte 3.
|
389 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 byte, aligned byte 3" \
|
390 |
|
|
[list "Initalization succeeded." \
|
391 |
|
|
"Execution step completed OK." \
|
392 |
|
|
"Resetting JTAG." \
|
393 |
|
|
"Execution step completed OK." \
|
394 |
|
|
"Shifting instruction." \
|
395 |
|
|
" shifting in: 0x01" \
|
396 |
|
|
" shifted out: 0x01" \
|
397 |
|
|
" time taken:" \
|
398 |
|
|
"Execution step completed OK." \
|
399 |
|
|
"Selecting module." \
|
400 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
401 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
402 |
|
|
" status: 0x0" \
|
403 |
|
|
" time taken:" \
|
404 |
|
|
"Execution step completed OK." \
|
405 |
|
|
"Processing WRITE_COMMAND." \
|
406 |
|
|
" shifting in: 0x00000000008db9a6dc00018000100048" \
|
407 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
408 |
|
|
" status: 0x0" \
|
409 |
|
|
" time taken:" \
|
410 |
|
|
"Execution step completed OK." \
|
411 |
|
|
"Processing GO_COMMAND_READ." \
|
412 |
|
|
" shifting in: 0x000000000000169330ba20" \
|
413 |
|
|
" shifted out: 0x0017084b5e190000000000" \
|
414 |
|
|
" data: 13" \
|
415 |
|
|
" status: 0x0" \
|
416 |
|
|
" time taken:" \
|
417 |
|
|
"Execution step completed OK." \
|
418 |
|
|
"Test completed successfully."] \
|
419 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
420 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100003" "1" \
|
421 |
|
|
"GO_COMMAND_READ" "1"
|
422 |
|
|
|
423 |
|
|
# GO_COMMAND reading one half word for Wishbone aligned at byte 0.
|
424 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 half word, aligned byte 0" \
|
425 |
|
|
[list "Initalization succeeded." \
|
426 |
|
|
"Execution step completed OK." \
|
427 |
|
|
"Resetting JTAG." \
|
428 |
|
|
"Execution step completed OK." \
|
429 |
|
|
"Shifting instruction." \
|
430 |
|
|
" shifting in: 0x01" \
|
431 |
|
|
" shifted out: 0x01" \
|
432 |
|
|
" time taken:" \
|
433 |
|
|
"Execution step completed OK." \
|
434 |
|
|
"Selecting module." \
|
435 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
436 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
437 |
|
|
" status: 0x0" \
|
438 |
|
|
" time taken:" \
|
439 |
|
|
"Execution step completed OK." \
|
440 |
|
|
"Processing WRITE_COMMAND." \
|
441 |
|
|
" shifting in: 0x000000000165ba59f900000000100148" \
|
442 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
443 |
|
|
" status: 0x0" \
|
444 |
|
|
" time taken:" \
|
445 |
|
|
"Execution step completed OK." \
|
446 |
|
|
"Processing GO_COMMAND_READ." \
|
447 |
|
|
" shifting in: 0x00000000000000169330ba20" \
|
448 |
|
|
" shifted out: 0x01bf1eca5211010000000000" \
|
449 |
|
|
" data: 1011" \
|
450 |
|
|
" status: 0x0" \
|
451 |
|
|
" time taken:" \
|
452 |
|
|
"Execution step completed OK." \
|
453 |
|
|
"Test completed successfully."] \
|
454 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
455 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "2" \
|
456 |
|
|
"GO_COMMAND_READ" "2"
|
457 |
|
|
|
458 |
|
|
# GO_COMMAND reading one half word for Wishbone aligned at byte 2.
|
459 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 half word, aligned byte 2" \
|
460 |
|
|
[list "Initalization succeeded." \
|
461 |
|
|
"Execution step completed OK." \
|
462 |
|
|
"Resetting JTAG." \
|
463 |
|
|
"Execution step completed OK." \
|
464 |
|
|
"Shifting instruction." \
|
465 |
|
|
" shifting in: 0x01" \
|
466 |
|
|
" shifted out: 0x01" \
|
467 |
|
|
" time taken:" \
|
468 |
|
|
"Execution step completed OK." \
|
469 |
|
|
"Selecting module." \
|
470 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
471 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
472 |
|
|
" status: 0x0" \
|
473 |
|
|
" time taken:" \
|
474 |
|
|
"Execution step completed OK." \
|
475 |
|
|
"Processing WRITE_COMMAND." \
|
476 |
|
|
" shifting in: 0x0000000001848f427900008000100148" \
|
477 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
478 |
|
|
" status: 0x0" \
|
479 |
|
|
" time taken:" \
|
480 |
|
|
"Execution step completed OK." \
|
481 |
|
|
"Processing GO_COMMAND_READ." \
|
482 |
|
|
" shifting in: 0x00000000000000169330ba20" \
|
483 |
|
|
" shifted out: 0x01791cc86819090000000000" \
|
484 |
|
|
" data: 1213" \
|
485 |
|
|
" status: 0x0" \
|
486 |
|
|
" time taken:" \
|
487 |
|
|
"Execution step completed OK." \
|
488 |
|
|
"Test completed successfully."] \
|
489 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
490 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100002" "2" \
|
491 |
|
|
"GO_COMMAND_READ" "2"
|
492 |
|
|
|
493 |
|
|
# GO_COMMAND reading one word for Wishbone aligned at byte 0.
|
494 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 word, aligned byte 0" \
|
495 |
|
|
[list "Initalization succeeded." \
|
496 |
|
|
"Execution step completed OK." \
|
497 |
|
|
"Resetting JTAG." \
|
498 |
|
|
"Execution step completed OK." \
|
499 |
|
|
"Shifting instruction." \
|
500 |
|
|
" shifting in: 0x01" \
|
501 |
|
|
" shifted out: 0x01" \
|
502 |
|
|
" time taken:" \
|
503 |
|
|
"Execution step completed OK." \
|
504 |
|
|
"Selecting module." \
|
505 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
506 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
507 |
|
|
" status: 0x0" \
|
508 |
|
|
" time taken:" \
|
509 |
|
|
"Execution step completed OK." \
|
510 |
|
|
"Processing WRITE_COMMAND." \
|
511 |
|
|
" shifting in: 0x00000000001039e5cf800000001000c8" \
|
512 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
513 |
|
|
" status: 0x0" \
|
514 |
|
|
" time taken:" \
|
515 |
|
|
"Execution step completed OK." \
|
516 |
|
|
"Processing GO_COMMAND_READ." \
|
517 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
518 |
|
|
" shifted out: 0x019de5beae190911010000000000" \
|
519 |
|
|
" data: 10111213" \
|
520 |
|
|
" status: 0x0" \
|
521 |
|
|
" time taken:" \
|
522 |
|
|
"Execution step completed OK." \
|
523 |
|
|
"Test completed successfully."] \
|
524 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
525 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "4" \
|
526 |
|
|
"GO_COMMAND_READ" "4"
|
527 |
|
|
|
528 |
|
|
# Verify that longer reads work OK, at different boundaries. For byte access
|
529 |
|
|
# read 9 bytes, for half-word access read 10 bytes and for word access read 12
|
530 |
|
|
# bytes.
|
531 |
|
|
|
532 |
|
|
# GO_COMMAND reading 9 bytes for Wishbone aligned at byte 0.
|
533 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 9 bytes, aligned byte 0" \
|
534 |
|
|
[list "Initalization succeeded." \
|
535 |
|
|
"Execution step completed OK." \
|
536 |
|
|
"Resetting JTAG." \
|
537 |
|
|
"Execution step completed OK." \
|
538 |
|
|
"Shifting instruction." \
|
539 |
|
|
" shifting in: 0x01" \
|
540 |
|
|
" shifted out: 0x01" \
|
541 |
|
|
" time taken:" \
|
542 |
|
|
"Execution step completed OK." \
|
543 |
|
|
"Selecting module." \
|
544 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
545 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
546 |
|
|
" status: 0x0" \
|
547 |
|
|
" time taken:" \
|
548 |
|
|
"Execution step completed OK." \
|
549 |
|
|
"Processing WRITE_COMMAND." \
|
550 |
|
|
" shifting in: 0x00000000019588aa9420000000100048" \
|
551 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
552 |
|
|
" status: 0x0" \
|
553 |
|
|
" time taken:" \
|
554 |
|
|
"Execution step completed OK." \
|
555 |
|
|
"Processing GO_COMMAND_READ." \
|
556 |
|
|
" shifting in: 0x0000000000000000000000000000169330ba20" \
|
557 |
|
|
" shifted out: 0x00efe148fc031d0d1505190911010000000000" \
|
558 |
|
|
" data: 101112131415161718" \
|
559 |
|
|
" status: 0x0" \
|
560 |
|
|
" time taken:" \
|
561 |
|
|
"Execution step completed OK." \
|
562 |
|
|
"Test completed successfully."] \
|
563 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
564 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "9" \
|
565 |
|
|
"GO_COMMAND_READ" "9"
|
566 |
|
|
|
567 |
|
|
# GO_COMMAND reading 9 bytes for Wishbone aligned at byte 1.
|
568 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 9 bytes, aligned byte 1" \
|
569 |
|
|
[list "Initalization succeeded." \
|
570 |
|
|
"Execution step completed OK." \
|
571 |
|
|
"Resetting JTAG." \
|
572 |
|
|
"Execution step completed OK." \
|
573 |
|
|
"Shifting instruction." \
|
574 |
|
|
" shifting in: 0x01" \
|
575 |
|
|
" shifted out: 0x01" \
|
576 |
|
|
" time taken:" \
|
577 |
|
|
"Execution step completed OK." \
|
578 |
|
|
"Selecting module." \
|
579 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
580 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
581 |
|
|
" status: 0x0" \
|
582 |
|
|
" time taken:" \
|
583 |
|
|
"Execution step completed OK." \
|
584 |
|
|
"Processing WRITE_COMMAND." \
|
585 |
|
|
" shifting in: 0x000000000057e29d9420010000100048" \
|
586 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
587 |
|
|
" status: 0x0" \
|
588 |
|
|
" time taken:" \
|
589 |
|
|
"Execution step completed OK." \
|
590 |
|
|
"Processing GO_COMMAND_READ." \
|
591 |
|
|
" shifting in: 0x0000000000000000000000000000169330ba20" \
|
592 |
|
|
" shifted out: 0x00df281a0413031d0d15051909110000000000" \
|
593 |
|
|
" data: 111213141516171819" \
|
594 |
|
|
" status: 0x0" \
|
595 |
|
|
" time taken:" \
|
596 |
|
|
"Execution step completed OK." \
|
597 |
|
|
"Test completed successfully."] \
|
598 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
599 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100001" "9" \
|
600 |
|
|
"GO_COMMAND_READ" "9"
|
601 |
|
|
|
602 |
|
|
# GO_COMMAND reading 9 bytes for Wishbone aligned at byte 2.
|
603 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 9 bytes, aligned byte 2" \
|
604 |
|
|
[list "Initalization succeeded." \
|
605 |
|
|
"Execution step completed OK." \
|
606 |
|
|
"Resetting JTAG." \
|
607 |
|
|
"Execution step completed OK." \
|
608 |
|
|
"Shifting instruction." \
|
609 |
|
|
" shifting in: 0x01" \
|
610 |
|
|
" shifted out: 0x01" \
|
611 |
|
|
" time taken:" \
|
612 |
|
|
"Execution step completed OK." \
|
613 |
|
|
"Selecting module." \
|
614 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
615 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
616 |
|
|
" status: 0x0" \
|
617 |
|
|
" time taken:" \
|
618 |
|
|
"Execution step completed OK." \
|
619 |
|
|
"Processing WRITE_COMMAND." \
|
620 |
|
|
" shifting in: 0x000000000174bdb11420008000100048" \
|
621 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
622 |
|
|
" status: 0x0" \
|
623 |
|
|
" time taken:" \
|
624 |
|
|
"Execution step completed OK." \
|
625 |
|
|
"Processing GO_COMMAND_READ." \
|
626 |
|
|
" shifting in: 0x0000000000000000000000000000169330ba20" \
|
627 |
|
|
" shifted out: 0x0058bcb0c60b13031d0d150519090000000000" \
|
628 |
|
|
" data: 12131415161718191a" \
|
629 |
|
|
" status: 0x0" \
|
630 |
|
|
" time taken:" \
|
631 |
|
|
"Execution step completed OK." \
|
632 |
|
|
"Test completed successfully."] \
|
633 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
634 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100002" "9" \
|
635 |
|
|
"GO_COMMAND_READ" "9"
|
636 |
|
|
|
637 |
|
|
# GO_COMMAND reading 9 bytes for Wishbone aligned at byte 3.
|
638 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 9 bytes, aligned byte 3" \
|
639 |
|
|
[list "Initalization succeeded." \
|
640 |
|
|
"Execution step completed OK." \
|
641 |
|
|
"Resetting JTAG." \
|
642 |
|
|
"Execution step completed OK." \
|
643 |
|
|
"Shifting instruction." \
|
644 |
|
|
" shifting in: 0x01" \
|
645 |
|
|
" shifted out: 0x01" \
|
646 |
|
|
" time taken:" \
|
647 |
|
|
"Execution step completed OK." \
|
648 |
|
|
"Selecting module." \
|
649 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
650 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
651 |
|
|
" status: 0x0" \
|
652 |
|
|
" time taken:" \
|
653 |
|
|
"Execution step completed OK." \
|
654 |
|
|
"Processing WRITE_COMMAND." \
|
655 |
|
|
" shifting in: 0x0000000000b6d7861420018000100048" \
|
656 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
657 |
|
|
" status: 0x0" \
|
658 |
|
|
" time taken:" \
|
659 |
|
|
"Execution step completed OK." \
|
660 |
|
|
"Processing GO_COMMAND_READ." \
|
661 |
|
|
" shifting in: 0x0000000000000000000000000000169330ba20" \
|
662 |
|
|
" shifted out: 0x00049f56881b0b13031d0d1505190000000000" \
|
663 |
|
|
" data: 131415161718191a1b" \
|
664 |
|
|
" status: 0x0" \
|
665 |
|
|
" time taken:" \
|
666 |
|
|
"Execution step completed OK." \
|
667 |
|
|
"Test completed successfully."] \
|
668 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
669 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100003" "9" \
|
670 |
|
|
"GO_COMMAND_READ" "9"
|
671 |
|
|
|
672 |
|
|
# GO_COMMAND reading 5 half words for Wishbone aligned at byte 0.
|
673 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 5 half words, aligned byte 0" \
|
674 |
|
|
[list "Initalization succeeded." \
|
675 |
|
|
"Execution step completed OK." \
|
676 |
|
|
"Resetting JTAG." \
|
677 |
|
|
"Execution step completed OK." \
|
678 |
|
|
"Shifting instruction." \
|
679 |
|
|
" shifting in: 0x01" \
|
680 |
|
|
" shifted out: 0x01" \
|
681 |
|
|
" time taken:" \
|
682 |
|
|
"Execution step completed OK." \
|
683 |
|
|
"Selecting module." \
|
684 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
685 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
686 |
|
|
" status: 0x0" \
|
687 |
|
|
" time taken:" \
|
688 |
|
|
"Execution step completed OK." \
|
689 |
|
|
"Processing WRITE_COMMAND." \
|
690 |
|
|
" shifting in: 0x00000000015ed4793120000000100148" \
|
691 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
692 |
|
|
" status: 0x0" \
|
693 |
|
|
" time taken:" \
|
694 |
|
|
"Execution step completed OK." \
|
695 |
|
|
"Processing GO_COMMAND_READ." \
|
696 |
|
|
" shifting in: 0x000000000000000000000000000000169330ba20" \
|
697 |
|
|
" shifted out: 0x01eb2b18e013031d0d1505190911010000000000" \
|
698 |
|
|
" data: 10111213141516171819" \
|
699 |
|
|
" status: 0x0" \
|
700 |
|
|
" time taken:" \
|
701 |
|
|
"Execution step completed OK." \
|
702 |
|
|
"Test completed successfully."] \
|
703 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
704 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "a" \
|
705 |
|
|
"GO_COMMAND_READ" "a"
|
706 |
|
|
|
707 |
|
|
# GO_COMMAND reading 5 half words for Wishbone aligned at byte 2.
|
708 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 5 half words, aligned byte 2" \
|
709 |
|
|
[list "Initalization succeeded." \
|
710 |
|
|
"Execution step completed OK." \
|
711 |
|
|
"Resetting JTAG." \
|
712 |
|
|
"Execution step completed OK." \
|
713 |
|
|
"Shifting instruction." \
|
714 |
|
|
" shifting in: 0x01" \
|
715 |
|
|
" shifted out: 0x01" \
|
716 |
|
|
" time taken:" \
|
717 |
|
|
"Execution step completed OK." \
|
718 |
|
|
"Selecting module." \
|
719 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
720 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
721 |
|
|
" status: 0x0" \
|
722 |
|
|
" time taken:" \
|
723 |
|
|
"Execution step completed OK." \
|
724 |
|
|
"Processing WRITE_COMMAND." \
|
725 |
|
|
" shifting in: 0x0000000001bfe162b120008000100148" \
|
726 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
727 |
|
|
" status: 0x0" \
|
728 |
|
|
" time taken:" \
|
729 |
|
|
"Execution step completed OK." \
|
730 |
|
|
"Processing GO_COMMAND_READ." \
|
731 |
|
|
" shifting in: 0x000000000000000000000000000000169330ba20" \
|
732 |
|
|
" shifted out: 0x01234b14981b0b13031d0d150519090000000000" \
|
733 |
|
|
" data: 12131415161718191a1b" \
|
734 |
|
|
" status: 0x0" \
|
735 |
|
|
" time taken:" \
|
736 |
|
|
"Execution step completed OK." \
|
737 |
|
|
"Test completed successfully."] \
|
738 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
739 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100002" "a" \
|
740 |
|
|
"GO_COMMAND_READ" "a"
|
741 |
|
|
|
742 |
|
|
# GO_COMMAND reading 3 words for Wishbone aligned at byte 0.
|
743 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 3 words, aligned byte 0" \
|
744 |
|
|
[list "Initalization succeeded." \
|
745 |
|
|
"Execution step completed OK." \
|
746 |
|
|
"Resetting JTAG." \
|
747 |
|
|
"Execution step completed OK." \
|
748 |
|
|
"Shifting instruction." \
|
749 |
|
|
" shifting in: 0x01" \
|
750 |
|
|
" shifted out: 0x01" \
|
751 |
|
|
" time taken:" \
|
752 |
|
|
"Execution step completed OK." \
|
753 |
|
|
"Selecting module." \
|
754 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
755 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
756 |
|
|
" status: 0x0" \
|
757 |
|
|
" time taken:" \
|
758 |
|
|
"Execution step completed OK." \
|
759 |
|
|
"Processing WRITE_COMMAND." \
|
760 |
|
|
" shifting in: 0x00000000002b57c507a00000001000c8" \
|
761 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
762 |
|
|
" status: 0x0" \
|
763 |
|
|
" time taken:" \
|
764 |
|
|
"Execution step completed OK." \
|
765 |
|
|
"Processing GO_COMMAND_READ." \
|
766 |
|
|
" shifting in: 0x0000000000000000000000000000000000169330ba20" \
|
767 |
|
|
" shifted out: 0x00248290b61b0b13031d0d1505190911010000000000" \
|
768 |
|
|
" data: 101112131415161718191a1b" \
|
769 |
|
|
" status: 0x0" \
|
770 |
|
|
" time taken:" \
|
771 |
|
|
"Execution step completed OK." \
|
772 |
|
|
"Test completed successfully."] \
|
773 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
774 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "c" \
|
775 |
|
|
"GO_COMMAND_READ" "c"
|
776 |
|
|
|
777 |
|
|
# Test of access for CPU0. Much simpler, since access type, alignment and
|
778 |
|
|
# length are more prescribed. Make use of loop-init, which initializes MACLO
|
779 |
|
|
# (0x2801) and MACHI (0x2802) to 0xdeadbeef and 0xcafebabe respectively. These
|
780 |
|
|
# are 32 bit values and presented in target endianess (which is big-endian for
|
781 |
|
|
# the OpenRISC, so the MS byte is as the highest address.
|
782 |
|
|
|
783 |
|
|
# GO_COMMAND reading 1 word for CPU0 aligned at byte 0.
|
784 |
|
|
run_libsim "JTAG GO_COMMAND (read) CPU0 1 word, aligned byte 0" \
|
785 |
|
|
[list "Initalization succeeded." \
|
786 |
|
|
"Execution step completed OK." \
|
787 |
|
|
"Resetting JTAG." \
|
788 |
|
|
"Execution step completed OK." \
|
789 |
|
|
"Shifting instruction." \
|
790 |
|
|
" shifting in: 0x01" \
|
791 |
|
|
" shifted out: 0x01" \
|
792 |
|
|
" time taken:" \
|
793 |
|
|
"Execution step completed OK." \
|
794 |
|
|
"Selecting module." \
|
795 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
796 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
797 |
|
|
" status: 0x0" \
|
798 |
|
|
" time taken:" \
|
799 |
|
|
"Execution step completed OK." \
|
800 |
|
|
"Processing WRITE_COMMAND." \
|
801 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
802 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
803 |
|
|
" status: 0x0" \
|
804 |
|
|
" time taken:" \
|
805 |
|
|
"Execution step completed OK." \
|
806 |
|
|
"Processing GO_COMMAND_READ." \
|
807 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
808 |
|
|
" shifted out: 0x00b8e2228e0f76afbee000000000" \
|
809 |
|
|
" status: 0x0" \
|
810 |
|
|
" time taken:" \
|
811 |
|
|
"Execution step completed OK." \
|
812 |
|
|
"Test completed successfully."] \
|
813 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
814 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4" \
|
815 |
|
|
"GO_COMMAND_READ" "4"
|
816 |
|
|
|
817 |
|
|
# Check address advances after GO_COMMAND read (1 per word for CPU, 4 per word
|
818 |
|
|
# for WB). Test WB with reading all sizes and lengths 1 through 0x10000. Test
|
819 |
|
|
# CPU0 with reading one word. Uses the initialized looping program for
|
820 |
|
|
# reproducible results.
|
821 |
|
|
|
822 |
|
|
# - for WB byte access try lengths 1, 2, 3, 4, 5, 8, 9, 0xffff and 0x10000
|
823 |
|
|
# - for WB half word access try lengths 2, 4, 6, 8, 10, 0xfffe and 0x10000
|
824 |
|
|
# - for WB full word access try lengths 4, 8, 12, 0xfffc and 0x10000
|
825 |
|
|
# - for CPU0 try length 4
|
826 |
|
|
|
827 |
|
|
# READ_COMMAND to advance address after reading 1 byte for WishBone (access
|
828 |
|
|
# type 4)
|
829 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 1 byte address advance" \
|
830 |
|
|
[list "Initalization succeeded." \
|
831 |
|
|
"Execution step completed OK." \
|
832 |
|
|
"Resetting JTAG." \
|
833 |
|
|
"Execution step completed OK." \
|
834 |
|
|
"Shifting instruction." \
|
835 |
|
|
" shifting in: 0x01" \
|
836 |
|
|
" shifted out: 0x01" \
|
837 |
|
|
" time taken:" \
|
838 |
|
|
"Execution step completed OK." \
|
839 |
|
|
"Selecting module." \
|
840 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
841 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
842 |
|
|
" status: 0x0" \
|
843 |
|
|
" time taken:" \
|
844 |
|
|
"Execution step completed OK." \
|
845 |
|
|
"Processing WRITE_COMMAND." \
|
846 |
|
|
" shifting in: 0x0000000001aee68a5c00000000100048" \
|
847 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
848 |
|
|
" status: 0x0" \
|
849 |
|
|
" time taken:" \
|
850 |
|
|
"Execution step completed OK." \
|
851 |
|
|
"Processing GO_COMMAND_READ." \
|
852 |
|
|
" shifting in: 0x000000000000169330ba20" \
|
853 |
|
|
" shifted out: 0x000464d308010000000000" \
|
854 |
|
|
" data: 10" \
|
855 |
|
|
" status: 0x0" \
|
856 |
|
|
" time taken:" \
|
857 |
|
|
"Execution step completed OK." \
|
858 |
|
|
"Processing READ_COMMAND." \
|
859 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
860 |
|
|
" shifted out: 0x1cb5ee99000001000010004000000000" \
|
861 |
|
|
" access_type: 0x4" \
|
862 |
|
|
" address: 0x100001" \
|
863 |
|
|
" length: 0x1" \
|
864 |
|
|
" status: 0x0" \
|
865 |
|
|
" time taken:" \
|
866 |
|
|
"Execution step completed OK." \
|
867 |
|
|
"Test completed successfully."] \
|
868 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
869 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "1" \
|
870 |
|
|
"GO_COMMAND_READ" "1" "READ_COMMAND"
|
871 |
|
|
|
872 |
|
|
# READ_COMMAND to advance address after reading 2 bytes for WishBone (access
|
873 |
|
|
# type 4)
|
874 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 2 bytes address advance" \
|
875 |
|
|
[list "Initalization succeeded." \
|
876 |
|
|
"Execution step completed OK." \
|
877 |
|
|
"Resetting JTAG." \
|
878 |
|
|
"Execution step completed OK." \
|
879 |
|
|
"Shifting instruction." \
|
880 |
|
|
" shifting in: 0x01" \
|
881 |
|
|
" shifted out: 0x01" \
|
882 |
|
|
" time taken:" \
|
883 |
|
|
"Execution step completed OK." \
|
884 |
|
|
"Selecting module." \
|
885 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
886 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
887 |
|
|
" status: 0x0" \
|
888 |
|
|
" time taken:" \
|
889 |
|
|
"Execution step completed OK." \
|
890 |
|
|
"Processing WRITE_COMMAND." \
|
891 |
|
|
" shifting in: 0x000000000075978c1d00000000100048" \
|
892 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
893 |
|
|
" status: 0x0" \
|
894 |
|
|
" time taken:" \
|
895 |
|
|
"Execution step completed OK." \
|
896 |
|
|
"Processing GO_COMMAND_READ." \
|
897 |
|
|
" shifting in: 0x00000000000000169330ba20" \
|
898 |
|
|
" shifted out: 0x01bf1eca5211010000000000" \
|
899 |
|
|
" data: 1011" \
|
900 |
|
|
" status: 0x0" \
|
901 |
|
|
" time taken:" \
|
902 |
|
|
"Execution step completed OK." \
|
903 |
|
|
"Processing READ_COMMAND." \
|
904 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
905 |
|
|
" shifted out: 0x1c4dc0b3c10000800010004000000000" \
|
906 |
|
|
" access_type: 0x4" \
|
907 |
|
|
" address: 0x100002" \
|
908 |
|
|
" length: 0x2" \
|
909 |
|
|
" status: 0x0" \
|
910 |
|
|
" time taken:" \
|
911 |
|
|
"Execution step completed OK." \
|
912 |
|
|
"Test completed successfully."] \
|
913 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
914 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "2" \
|
915 |
|
|
"GO_COMMAND_READ" "2" "READ_COMMAND"
|
916 |
|
|
|
917 |
|
|
# READ_COMMAND to advance address after reading 3 bytes for WishBone (access
|
918 |
|
|
# type 4)
|
919 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 3 bytes address advance" \
|
920 |
|
|
[list "Initalization succeeded." \
|
921 |
|
|
"Execution step completed OK." \
|
922 |
|
|
"Resetting JTAG." \
|
923 |
|
|
"Execution step completed OK." \
|
924 |
|
|
"Shifting instruction." \
|
925 |
|
|
" shifting in: 0x01" \
|
926 |
|
|
" shifted out: 0x01" \
|
927 |
|
|
" time taken:" \
|
928 |
|
|
"Execution step completed OK." \
|
929 |
|
|
"Selecting module." \
|
930 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
931 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
932 |
|
|
" status: 0x0" \
|
933 |
|
|
" time taken:" \
|
934 |
|
|
"Execution step completed OK." \
|
935 |
|
|
"Processing WRITE_COMMAND." \
|
936 |
|
|
" shifting in: 0x0000000001435e097c80000000100048" \
|
937 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
938 |
|
|
" status: 0x0" \
|
939 |
|
|
" time taken:" \
|
940 |
|
|
"Execution step completed OK." \
|
941 |
|
|
"Processing GO_COMMAND_READ." \
|
942 |
|
|
" shifting in: 0x0000000000000000169330ba20" \
|
943 |
|
|
" shifted out: 0x00fd0696b60911010000000000" \
|
944 |
|
|
" data: 101112" \
|
945 |
|
|
" status: 0x0" \
|
946 |
|
|
" time taken:" \
|
947 |
|
|
"Execution step completed OK." \
|
948 |
|
|
"Processing READ_COMMAND." \
|
949 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
950 |
|
|
" shifted out: 0x1cb96301a08001800010004000000000" \
|
951 |
|
|
" access_type: 0x4" \
|
952 |
|
|
" address: 0x100003" \
|
953 |
|
|
" length: 0x3" \
|
954 |
|
|
" status: 0x0" \
|
955 |
|
|
" time taken:" \
|
956 |
|
|
"Execution step completed OK." \
|
957 |
|
|
"Test completed successfully."] \
|
958 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
959 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "3" \
|
960 |
|
|
"GO_COMMAND_READ" "3" "READ_COMMAND"
|
961 |
|
|
|
962 |
|
|
# READ_COMMAND to advance address after reading 4 bytes for WishBone (access
|
963 |
|
|
# type 4)
|
964 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 4 bytes address advance" \
|
965 |
|
|
[list "Initalization succeeded." \
|
966 |
|
|
"Execution step completed OK." \
|
967 |
|
|
"Resetting JTAG." \
|
968 |
|
|
"Execution step completed OK." \
|
969 |
|
|
"Shifting instruction." \
|
970 |
|
|
" shifting in: 0x01" \
|
971 |
|
|
" shifted out: 0x01" \
|
972 |
|
|
" time taken:" \
|
973 |
|
|
"Execution step completed OK." \
|
974 |
|
|
"Selecting module." \
|
975 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
976 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
977 |
|
|
" status: 0x0" \
|
978 |
|
|
" time taken:" \
|
979 |
|
|
"Execution step completed OK." \
|
980 |
|
|
"Processing WRITE_COMMAND." \
|
981 |
|
|
" shifting in: 0x0000000000982f0f3d80000000100048" \
|
982 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
983 |
|
|
" status: 0x0" \
|
984 |
|
|
" time taken:" \
|
985 |
|
|
"Execution step completed OK." \
|
986 |
|
|
"Processing GO_COMMAND_READ." \
|
987 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
988 |
|
|
" shifted out: 0x019de5beae190911010000000000" \
|
989 |
|
|
" data: 10111213" \
|
990 |
|
|
" status: 0x0" \
|
991 |
|
|
" time taken:" \
|
992 |
|
|
"Execution step completed OK." \
|
993 |
|
|
"Processing READ_COMMAND." \
|
994 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
995 |
|
|
" shifted out: 0x1c31d7a6a18000400010004000000000" \
|
996 |
|
|
" access_type: 0x4" \
|
997 |
|
|
" address: 0x100004" \
|
998 |
|
|
" length: 0x4" \
|
999 |
|
|
" status: 0x0" \
|
1000 |
|
|
" time taken:" \
|
1001 |
|
|
"Execution step completed OK." \
|
1002 |
|
|
"Test completed successfully."] \
|
1003 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1004 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "4" \
|
1005 |
|
|
"GO_COMMAND_READ" "4" "READ_COMMAND"
|
1006 |
|
|
|
1007 |
|
|
# READ_COMMAND to advance address after reading 5 bytes for WishBone (access
|
1008 |
|
|
# type 4)
|
1009 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 5 bytes address advance" \
|
1010 |
|
|
[list "Initalization succeeded." \
|
1011 |
|
|
"Execution step completed OK." \
|
1012 |
|
|
"Resetting JTAG." \
|
1013 |
|
|
"Execution step completed OK." \
|
1014 |
|
|
"Shifting instruction." \
|
1015 |
|
|
" shifting in: 0x01" \
|
1016 |
|
|
" shifted out: 0x01" \
|
1017 |
|
|
" time taken:" \
|
1018 |
|
|
"Execution step completed OK." \
|
1019 |
|
|
"Selecting module." \
|
1020 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1021 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1022 |
|
|
" status: 0x0" \
|
1023 |
|
|
" time taken:" \
|
1024 |
|
|
"Execution step completed OK." \
|
1025 |
|
|
"Processing WRITE_COMMAND." \
|
1026 |
|
|
" shifting in: 0x0000000001d83acbcc40000000100048" \
|
1027 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1028 |
|
|
" status: 0x0" \
|
1029 |
|
|
" time taken:" \
|
1030 |
|
|
"Execution step completed OK." \
|
1031 |
|
|
"Processing GO_COMMAND_READ." \
|
1032 |
|
|
" shifting in: 0x00000000000000000000169330ba20" \
|
1033 |
|
|
" shifted out: 0x0040999fde05190911010000000000" \
|
1034 |
|
|
" data: 1011121314" \
|
1035 |
|
|
" status: 0x0" \
|
1036 |
|
|
" time taken:" \
|
1037 |
|
|
"Execution step completed OK." \
|
1038 |
|
|
"Processing READ_COMMAND." \
|
1039 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1040 |
|
|
" shifted out: 0x0104b831404001400010004000000000" \
|
1041 |
|
|
" access_type: 0x4" \
|
1042 |
|
|
" address: 0x100005" \
|
1043 |
|
|
" length: 0x5" \
|
1044 |
|
|
" status: 0x0" \
|
1045 |
|
|
" time taken:" \
|
1046 |
|
|
"Execution step completed OK." \
|
1047 |
|
|
"Test completed successfully."] \
|
1048 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1049 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "5" \
|
1050 |
|
|
"GO_COMMAND_READ" "5" "READ_COMMAND"
|
1051 |
|
|
|
1052 |
|
|
# READ_COMMAND to advance address after reading 8 bytes for WishBone (access
|
1053 |
|
|
# type 4)
|
1054 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 8 bytes address advance" \
|
1055 |
|
|
[list "Initalization succeeded." \
|
1056 |
|
|
"Execution step completed OK." \
|
1057 |
|
|
"Resetting JTAG." \
|
1058 |
|
|
"Execution step completed OK." \
|
1059 |
|
|
"Shifting instruction." \
|
1060 |
|
|
" shifting in: 0x01" \
|
1061 |
|
|
" shifted out: 0x01" \
|
1062 |
|
|
" time taken:" \
|
1063 |
|
|
"Execution step completed OK." \
|
1064 |
|
|
"Selecting module." \
|
1065 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1066 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1067 |
|
|
" status: 0x0" \
|
1068 |
|
|
" time taken:" \
|
1069 |
|
|
"Execution step completed OK." \
|
1070 |
|
|
"Processing WRITE_COMMAND." \
|
1071 |
|
|
" shifting in: 0x0000000000eef34eadc0000000100048" \
|
1072 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1073 |
|
|
" status: 0x0" \
|
1074 |
|
|
" time taken:" \
|
1075 |
|
|
"Execution step completed OK." \
|
1076 |
|
|
"Processing GO_COMMAND_READ." \
|
1077 |
|
|
" shifting in: 0x00000000000000000000000000169330ba20" \
|
1078 |
|
|
" shifted out: 0x003458d6401d0d1505190911010000000000" \
|
1079 |
|
|
" data: 1011121314151617" \
|
1080 |
|
|
" status: 0x0" \
|
1081 |
|
|
" time taken:" \
|
1082 |
|
|
"Execution step completed OK." \
|
1083 |
|
|
"Processing READ_COMMAND." \
|
1084 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1085 |
|
|
" shifted out: 0x01b8cc4801c000200010004000000000" \
|
1086 |
|
|
" access_type: 0x4" \
|
1087 |
|
|
" address: 0x100008" \
|
1088 |
|
|
" length: 0x8" \
|
1089 |
|
|
" status: 0x0" \
|
1090 |
|
|
" time taken:" \
|
1091 |
|
|
"Execution step completed OK." \
|
1092 |
|
|
"Test completed successfully."] \
|
1093 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1094 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "8" \
|
1095 |
|
|
"GO_COMMAND_READ" "8" "READ_COMMAND"
|
1096 |
|
|
|
1097 |
|
|
# READ_COMMAND to advance address after reading 9 bytes for WishBone (access
|
1098 |
|
|
# type 4)
|
1099 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 9 bytes address advance" \
|
1100 |
|
|
[list "Initalization succeeded." \
|
1101 |
|
|
"Execution step completed OK." \
|
1102 |
|
|
"Resetting JTAG." \
|
1103 |
|
|
"Execution step completed OK." \
|
1104 |
|
|
"Shifting instruction." \
|
1105 |
|
|
" shifting in: 0x01" \
|
1106 |
|
|
" shifted out: 0x01" \
|
1107 |
|
|
" time taken:" \
|
1108 |
|
|
"Execution step completed OK." \
|
1109 |
|
|
"Selecting module." \
|
1110 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1111 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1112 |
|
|
" status: 0x0" \
|
1113 |
|
|
" time taken:" \
|
1114 |
|
|
"Execution step completed OK." \
|
1115 |
|
|
"Processing WRITE_COMMAND." \
|
1116 |
|
|
" shifting in: 0x00000000019588aa9420000000100048" \
|
1117 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1118 |
|
|
" status: 0x0" \
|
1119 |
|
|
" time taken:" \
|
1120 |
|
|
"Execution step completed OK." \
|
1121 |
|
|
"Processing GO_COMMAND_READ." \
|
1122 |
|
|
" shifting in: 0x0000000000000000000000000000169330ba20" \
|
1123 |
|
|
" shifted out: 0x00efe148fc031d0d1505190911010000000000" \
|
1124 |
|
|
" data: 101112131415161718" \
|
1125 |
|
|
" status: 0x0" \
|
1126 |
|
|
" time taken:" \
|
1127 |
|
|
"Execution step completed OK." \
|
1128 |
|
|
"Processing READ_COMMAND." \
|
1129 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1130 |
|
|
" shifted out: 0x126d45cd202001200010004000000000" \
|
1131 |
|
|
" access_type: 0x4" \
|
1132 |
|
|
" address: 0x100009" \
|
1133 |
|
|
" length: 0x9" \
|
1134 |
|
|
" status: 0x0" \
|
1135 |
|
|
" time taken:" \
|
1136 |
|
|
"Execution step completed OK." \
|
1137 |
|
|
"Test completed successfully."] \
|
1138 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1139 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "9" \
|
1140 |
|
|
"GO_COMMAND_READ" "9" "READ_COMMAND"
|
1141 |
|
|
|
1142 |
|
|
# READ_COMMAND to advance address after reading 0xffff bytes for WishBone
|
1143 |
|
|
# (access type 4). Only partially match the data read back.
|
1144 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 0xffff bytes address advance" \
|
1145 |
|
|
[list "Initalization succeeded." \
|
1146 |
|
|
"Execution step completed OK." \
|
1147 |
|
|
"Resetting JTAG." \
|
1148 |
|
|
"Execution step completed OK." \
|
1149 |
|
|
"Shifting instruction." \
|
1150 |
|
|
" shifting in: 0x01" \
|
1151 |
|
|
" shifted out: 0x01" \
|
1152 |
|
|
" time taken:" \
|
1153 |
|
|
"Execution step completed OK." \
|
1154 |
|
|
"Selecting module." \
|
1155 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1156 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1157 |
|
|
" status: 0x0" \
|
1158 |
|
|
" time taken:" \
|
1159 |
|
|
"Execution step completed OK." \
|
1160 |
|
|
"Processing WRITE_COMMAND." \
|
1161 |
|
|
" shifting in: 0x000000000109dba9e2fffe0000100048" \
|
1162 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1163 |
|
|
" status: 0x0" \
|
1164 |
|
|
" time taken:" \
|
1165 |
|
|
"Execution step completed OK." \
|
1166 |
|
|
"Processing GO_COMMAND_READ." \
|
1167 |
|
|
" shifting in: 0x00000000000000000000000000000000000000000000000" \
|
1168 |
|
|
" shifted out: 0x00a0a530360000000000000000000000000000000000000" \
|
1169 |
|
|
" data: 101112131415161718191a1b1c1d1e1f00000000000000000" \
|
1170 |
|
|
" status: 0x0" \
|
1171 |
|
|
" time taken:" \
|
1172 |
|
|
"Execution step completed OK." \
|
1173 |
|
|
"Processing READ_COMMAND." \
|
1174 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1175 |
|
|
" shifted out: 0x19caa5fc00fffffffe10004000000000" \
|
1176 |
|
|
" access_type: 0x4" \
|
1177 |
|
|
" address: 0x10ffff" \
|
1178 |
|
|
" length: 0xffff" \
|
1179 |
|
|
" status: 0x0" \
|
1180 |
|
|
" time taken:" \
|
1181 |
|
|
"Execution step completed OK." \
|
1182 |
|
|
"Test completed successfully."] \
|
1183 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1184 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "ffff" \
|
1185 |
|
|
"GO_COMMAND_READ" "ffff" "READ_COMMAND"
|
1186 |
|
|
|
1187 |
|
|
# READ_COMMAND to advance address after reading 0x10000 bytes for WishBone
|
1188 |
|
|
# (access type 4). Only partially match the data read back.
|
1189 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 0x10000 bytes address advance" \
|
1190 |
|
|
[list "Initalization succeeded." \
|
1191 |
|
|
"Execution step completed OK." \
|
1192 |
|
|
"Resetting JTAG." \
|
1193 |
|
|
"Execution step completed OK." \
|
1194 |
|
|
"Shifting instruction." \
|
1195 |
|
|
" shifting in: 0x01" \
|
1196 |
|
|
" shifted out: 0x01" \
|
1197 |
|
|
" time taken:" \
|
1198 |
|
|
"Execution step completed OK." \
|
1199 |
|
|
"Selecting module." \
|
1200 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1201 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1202 |
|
|
" status: 0x0" \
|
1203 |
|
|
" time taken:" \
|
1204 |
|
|
"Execution step completed OK." \
|
1205 |
|
|
"Processing WRITE_COMMAND." \
|
1206 |
|
|
" shifting in: 0x0000000000d2aaafa3fffe0000100048" \
|
1207 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1208 |
|
|
" status: 0x0" \
|
1209 |
|
|
" time taken:" \
|
1210 |
|
|
"Execution step completed OK." \
|
1211 |
|
|
"Processing GO_COMMAND_READ." \
|
1212 |
|
|
" shifting in: 0x00000000000000000000000000000000000000000000000" \
|
1213 |
|
|
" shifted out: 0x01146b36e80000000000000000000000000000000000000" \
|
1214 |
|
|
" data: 101112131415161718191a1b1c1d1e1f00000000000000000" \
|
1215 |
|
|
" status: 0x0" \
|
1216 |
|
|
" time taken:" \
|
1217 |
|
|
"Execution step completed OK." \
|
1218 |
|
|
"Processing READ_COMMAND." \
|
1219 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1220 |
|
|
" shifted out: 0x0db27fb041fffe000110004000000000" \
|
1221 |
|
|
" access_type: 0x4" \
|
1222 |
|
|
" address: 0x110000" \
|
1223 |
|
|
" length: 0x10000" \
|
1224 |
|
|
" status: 0x0" \
|
1225 |
|
|
" time taken:" \
|
1226 |
|
|
"Execution step completed OK." \
|
1227 |
|
|
"Test completed successfully."] \
|
1228 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1229 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "10000" \
|
1230 |
|
|
"GO_COMMAND_READ" "10000" "READ_COMMAND"
|
1231 |
|
|
|
1232 |
|
|
# READ_COMMAND to advance address after reading 1 half word (2 bytes) for
|
1233 |
|
|
# WishBone (access type 5)
|
1234 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 1 half word address advance" \
|
1235 |
|
|
[list "Initalization succeeded." \
|
1236 |
|
|
"Execution step completed OK." \
|
1237 |
|
|
"Resetting JTAG." \
|
1238 |
|
|
"Execution step completed OK." \
|
1239 |
|
|
"Shifting instruction." \
|
1240 |
|
|
" shifting in: 0x01" \
|
1241 |
|
|
" shifted out: 0x01" \
|
1242 |
|
|
" time taken:" \
|
1243 |
|
|
"Execution step completed OK." \
|
1244 |
|
|
"Selecting module." \
|
1245 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1246 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1247 |
|
|
" status: 0x0" \
|
1248 |
|
|
" time taken:" \
|
1249 |
|
|
"Execution step completed OK." \
|
1250 |
|
|
"Processing WRITE_COMMAND." \
|
1251 |
|
|
" shifting in: 0x000000000165ba59f900000000100148" \
|
1252 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1253 |
|
|
" status: 0x0" \
|
1254 |
|
|
" time taken:" \
|
1255 |
|
|
"Execution step completed OK." \
|
1256 |
|
|
"Processing GO_COMMAND_READ." \
|
1257 |
|
|
" shifting in: 0x00000000000000169330ba20" \
|
1258 |
|
|
" shifted out: 0x01bf1eca5211010000000000" \
|
1259 |
|
|
" data: 1011" \
|
1260 |
|
|
" status: 0x0" \
|
1261 |
|
|
" time taken:" \
|
1262 |
|
|
"Execution step completed OK." \
|
1263 |
|
|
"Processing READ_COMMAND." \
|
1264 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1265 |
|
|
" shifted out: 0x1a30297f210000800010014000000000" \
|
1266 |
|
|
" access_type: 0x5" \
|
1267 |
|
|
" address: 0x100002" \
|
1268 |
|
|
" length: 0x2" \
|
1269 |
|
|
" status: 0x0" \
|
1270 |
|
|
" time taken:" \
|
1271 |
|
|
"Execution step completed OK." \
|
1272 |
|
|
"Test completed successfully."] \
|
1273 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1274 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "2" \
|
1275 |
|
|
"GO_COMMAND_READ" "2" "READ_COMMAND"
|
1276 |
|
|
|
1277 |
|
|
# READ_COMMAND to advance address after reading 2 half words (4 bytes) for
|
1278 |
|
|
# WishBone (access type 5)
|
1279 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 2 half words address advance" \
|
1280 |
|
|
[list "Initalization succeeded." \
|
1281 |
|
|
"Execution step completed OK." \
|
1282 |
|
|
"Resetting JTAG." \
|
1283 |
|
|
"Execution step completed OK." \
|
1284 |
|
|
"Shifting instruction." \
|
1285 |
|
|
" shifting in: 0x01" \
|
1286 |
|
|
" shifted out: 0x01" \
|
1287 |
|
|
" time taken:" \
|
1288 |
|
|
"Execution step completed OK." \
|
1289 |
|
|
"Selecting module." \
|
1290 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1291 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1292 |
|
|
" status: 0x0" \
|
1293 |
|
|
" time taken:" \
|
1294 |
|
|
"Execution step completed OK." \
|
1295 |
|
|
"Processing WRITE_COMMAND." \
|
1296 |
|
|
" shifting in: 0x00000000018802dad980000000100148" \
|
1297 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1298 |
|
|
" status: 0x0" \
|
1299 |
|
|
" time taken:" \
|
1300 |
|
|
"Execution step completed OK." \
|
1301 |
|
|
"Processing GO_COMMAND_READ." \
|
1302 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
1303 |
|
|
" shifted out: 0x019de5beae190911010000000000" \
|
1304 |
|
|
" data: 10111213" \
|
1305 |
|
|
" status: 0x0" \
|
1306 |
|
|
" time taken:" \
|
1307 |
|
|
"Execution step completed OK." \
|
1308 |
|
|
"Processing READ_COMMAND." \
|
1309 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1310 |
|
|
" shifted out: 0x1a4c3e6a418000400010014000000000" \
|
1311 |
|
|
" access_type: 0x5" \
|
1312 |
|
|
" address: 0x100004" \
|
1313 |
|
|
" length: 0x4" \
|
1314 |
|
|
" status: 0x0" \
|
1315 |
|
|
" time taken:" \
|
1316 |
|
|
"Execution step completed OK." \
|
1317 |
|
|
"Test completed successfully."] \
|
1318 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1319 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "4" \
|
1320 |
|
|
"GO_COMMAND_READ" "4" "READ_COMMAND"
|
1321 |
|
|
|
1322 |
|
|
# READ_COMMAND to advance address after reading 3 half words (6 bytes) for
|
1323 |
|
|
# WishBone (access type 5)
|
1324 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 3 half words address advance" \
|
1325 |
|
|
[list "Initalization succeeded." \
|
1326 |
|
|
"Execution step completed OK." \
|
1327 |
|
|
"Resetting JTAG." \
|
1328 |
|
|
"Execution step completed OK." \
|
1329 |
|
|
"Shifting instruction." \
|
1330 |
|
|
" shifting in: 0x01" \
|
1331 |
|
|
" shifted out: 0x01" \
|
1332 |
|
|
" time taken:" \
|
1333 |
|
|
"Execution step completed OK." \
|
1334 |
|
|
"Selecting module." \
|
1335 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1336 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1337 |
|
|
" status: 0x0" \
|
1338 |
|
|
" time taken:" \
|
1339 |
|
|
"Execution step completed OK." \
|
1340 |
|
|
"Processing WRITE_COMMAND." \
|
1341 |
|
|
" shifting in: 0x00000000011366186940000000100148" \
|
1342 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1343 |
|
|
" status: 0x0" \
|
1344 |
|
|
" time taken:" \
|
1345 |
|
|
"Execution step completed OK." \
|
1346 |
|
|
"Processing GO_COMMAND_READ." \
|
1347 |
|
|
" shifting in: 0x0000000000000000000000169330ba20" \
|
1348 |
|
|
" shifted out: 0x01d78784e61505190911010000000000" \
|
1349 |
|
|
" data: 101112131415" \
|
1350 |
|
|
" status: 0x0" \
|
1351 |
|
|
" time taken:" \
|
1352 |
|
|
"Execution step completed OK." \
|
1353 |
|
|
"Processing READ_COMMAND." \
|
1354 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1355 |
|
|
" shifted out: 0x07817fd7614000c00010014000000000" \
|
1356 |
|
|
" access_type: 0x5" \
|
1357 |
|
|
" address: 0x100006" \
|
1358 |
|
|
" length: 0x6" \
|
1359 |
|
|
" status: 0x0" \
|
1360 |
|
|
" time taken:" \
|
1361 |
|
|
"Execution step completed OK." \
|
1362 |
|
|
"Test completed successfully."] \
|
1363 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1364 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "6" \
|
1365 |
|
|
"GO_COMMAND_READ" "6" "READ_COMMAND"
|
1366 |
|
|
|
1367 |
|
|
# READ_COMMAND to advance address after reading 4 half words (8 bytes) for
|
1368 |
|
|
# WishBone (access type 5)
|
1369 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 4 half words address advance" \
|
1370 |
|
|
[list "Initalization succeeded." \
|
1371 |
|
|
"Execution step completed OK." \
|
1372 |
|
|
"Resetting JTAG." \
|
1373 |
|
|
"Execution step completed OK." \
|
1374 |
|
|
"Shifting instruction." \
|
1375 |
|
|
" shifting in: 0x01" \
|
1376 |
|
|
" shifted out: 0x01" \
|
1377 |
|
|
" time taken:" \
|
1378 |
|
|
"Execution step completed OK." \
|
1379 |
|
|
"Selecting module." \
|
1380 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1381 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1382 |
|
|
" status: 0x0" \
|
1383 |
|
|
" time taken:" \
|
1384 |
|
|
"Execution step completed OK." \
|
1385 |
|
|
"Processing WRITE_COMMAND." \
|
1386 |
|
|
" shifting in: 0x0000000001fede9b49c0000000100148" \
|
1387 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1388 |
|
|
" status: 0x0" \
|
1389 |
|
|
" time taken:" \
|
1390 |
|
|
"Execution step completed OK." \
|
1391 |
|
|
"Processing GO_COMMAND_READ." \
|
1392 |
|
|
" shifting in: 0x00000000000000000000000000169330ba20" \
|
1393 |
|
|
" shifted out: 0x003458d6401d0d1505190911010000000000" \
|
1394 |
|
|
" data: 1011121314151617" \
|
1395 |
|
|
" status: 0x0" \
|
1396 |
|
|
" time taken:" \
|
1397 |
|
|
"Execution step completed OK." \
|
1398 |
|
|
"Processing READ_COMMAND." \
|
1399 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1400 |
|
|
" shifted out: 0x07c52584e1c000200010014000000000" \
|
1401 |
|
|
" access_type: 0x5" \
|
1402 |
|
|
" address: 0x100008" \
|
1403 |
|
|
" length: 0x8" \
|
1404 |
|
|
" status: 0x0" \
|
1405 |
|
|
" time taken:" \
|
1406 |
|
|
"Execution step completed OK." \
|
1407 |
|
|
"Test completed successfully."] \
|
1408 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1409 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "8" \
|
1410 |
|
|
"GO_COMMAND_READ" "8" "READ_COMMAND"
|
1411 |
|
|
|
1412 |
|
|
# READ_COMMAND to advance address after reading 5 half words (10 bytes) for
|
1413 |
|
|
# WishBone (access type 5)
|
1414 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 5 half words address advance" \
|
1415 |
|
|
[list "Initalization succeeded." \
|
1416 |
|
|
"Execution step completed OK." \
|
1417 |
|
|
"Resetting JTAG." \
|
1418 |
|
|
"Execution step completed OK." \
|
1419 |
|
|
"Shifting instruction." \
|
1420 |
|
|
" shifting in: 0x01" \
|
1421 |
|
|
" shifted out: 0x01" \
|
1422 |
|
|
" time taken:" \
|
1423 |
|
|
"Execution step completed OK." \
|
1424 |
|
|
"Selecting module." \
|
1425 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1426 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1427 |
|
|
" status: 0x0" \
|
1428 |
|
|
" time taken:" \
|
1429 |
|
|
"Execution step completed OK." \
|
1430 |
|
|
"Processing WRITE_COMMAND." \
|
1431 |
|
|
" shifting in: 0x00000000015ed4793120000000100148" \
|
1432 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1433 |
|
|
" status: 0x0" \
|
1434 |
|
|
" time taken:" \
|
1435 |
|
|
"Execution step completed OK." \
|
1436 |
|
|
"Processing GO_COMMAND_READ." \
|
1437 |
|
|
" shifting in: 0x000000000000000000000000000000169330ba20" \
|
1438 |
|
|
" shifted out: 0x01eb2b18e013031d0d1505190911010000000000" \
|
1439 |
|
|
" data: 10111213141516171819" \
|
1440 |
|
|
" status: 0x0" \
|
1441 |
|
|
" time taken:" \
|
1442 |
|
|
"Execution step completed OK." \
|
1443 |
|
|
"Processing READ_COMMAND." \
|
1444 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1445 |
|
|
" shifted out: 0x14e8822b012000a00010014000000000" \
|
1446 |
|
|
" access_type: 0x5" \
|
1447 |
|
|
" address: 0x10000a" \
|
1448 |
|
|
" length: 0xa" \
|
1449 |
|
|
" status: 0x0" \
|
1450 |
|
|
" time taken:" \
|
1451 |
|
|
"Execution step completed OK." \
|
1452 |
|
|
"Test completed successfully."] \
|
1453 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1454 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "a" \
|
1455 |
|
|
"GO_COMMAND_READ" "a" "READ_COMMAND"
|
1456 |
|
|
|
1457 |
|
|
# READ_COMMAND to advance address after reading 0x7fff half words (0xfffe
|
1458 |
|
|
# bytes) for WishBone (access type 5)
|
1459 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 0x7fff half words address advance" \
|
1460 |
|
|
[list "Initalization succeeded." \
|
1461 |
|
|
"Execution step completed OK." \
|
1462 |
|
|
"Resetting JTAG." \
|
1463 |
|
|
"Execution step completed OK." \
|
1464 |
|
|
"Shifting instruction." \
|
1465 |
|
|
" shifting in: 0x01" \
|
1466 |
|
|
" shifted out: 0x01" \
|
1467 |
|
|
" time taken:" \
|
1468 |
|
|
"Execution step completed OK." \
|
1469 |
|
|
"Selecting module." \
|
1470 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1471 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1472 |
|
|
" status: 0x0" \
|
1473 |
|
|
" time taken:" \
|
1474 |
|
|
"Execution step completed OK." \
|
1475 |
|
|
"Processing WRITE_COMMAND." \
|
1476 |
|
|
" shifting in: 0x00000000012f3ff9677ffe0000100148" \
|
1477 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1478 |
|
|
" status: 0x0" \
|
1479 |
|
|
" time taken:" \
|
1480 |
|
|
"Execution step completed OK." \
|
1481 |
|
|
"Processing GO_COMMAND_READ." \
|
1482 |
|
|
" shifting in: 0x00000000000000000000000000000000000000000000000" \
|
1483 |
|
|
" shifted out: 0x00afd24ee00000000000000000000000000000000000000" \
|
1484 |
|
|
" data: 101112131415161718191a1b1c1d1e1f00000000000000000" \
|
1485 |
|
|
" status: 0x0" \
|
1486 |
|
|
" time taken:" \
|
1487 |
|
|
"Execution step completed OK." \
|
1488 |
|
|
"Processing READ_COMMAND." \
|
1489 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1490 |
|
|
" shifted out: 0x1f43ef82817ffefffe10014000000000" \
|
1491 |
|
|
" access_type: 0x5" \
|
1492 |
|
|
" address: 0x10fffe" \
|
1493 |
|
|
" length: 0xfffe" \
|
1494 |
|
|
" status: 0x0" \
|
1495 |
|
|
" time taken:" \
|
1496 |
|
|
"Execution step completed OK." \
|
1497 |
|
|
"Test completed successfully."] \
|
1498 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1499 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "fffe" \
|
1500 |
|
|
"GO_COMMAND_READ" "fffe" "READ_COMMAND"
|
1501 |
|
|
|
1502 |
|
|
# READ_COMMAND to advance address after reading 0x8000 half words (0x10000
|
1503 |
|
|
# bytes) for WishBone (access type 5)
|
1504 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 0x8000 half words address advance" \
|
1505 |
|
|
[list "Initalization succeeded." \
|
1506 |
|
|
"Execution step completed OK." \
|
1507 |
|
|
"Resetting JTAG." \
|
1508 |
|
|
"Execution step completed OK." \
|
1509 |
|
|
"Shifting instruction." \
|
1510 |
|
|
" shifting in: 0x01" \
|
1511 |
|
|
" shifted out: 0x01" \
|
1512 |
|
|
" time taken:" \
|
1513 |
|
|
"Execution step completed OK." \
|
1514 |
|
|
"Selecting module." \
|
1515 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1516 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1517 |
|
|
" status: 0x0" \
|
1518 |
|
|
" time taken:" \
|
1519 |
|
|
"Execution step completed OK." \
|
1520 |
|
|
"Processing WRITE_COMMAND." \
|
1521 |
|
|
" shifting in: 0x0000000001c2877a47fffe0000100148" \
|
1522 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1523 |
|
|
" status: 0x0" \
|
1524 |
|
|
" time taken:" \
|
1525 |
|
|
"Execution step completed OK." \
|
1526 |
|
|
"Processing GO_COMMAND_READ." \
|
1527 |
|
|
" shifting in: 0x00000000000000000000000000000000000000000000000" \
|
1528 |
|
|
" shifted out: 0x01146b36e80000000000000000000000000000000000000" \
|
1529 |
|
|
" data: 101112131415161718191a1b1c1d1e1f00000000000000000" \
|
1530 |
|
|
" status: 0x0" \
|
1531 |
|
|
" time taken:" \
|
1532 |
|
|
"Execution step completed OK." \
|
1533 |
|
|
"Processing READ_COMMAND." \
|
1534 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1535 |
|
|
" shifted out: 0x0bcf967ca1fffe000110014000000000" \
|
1536 |
|
|
" access_type: 0x5" \
|
1537 |
|
|
" address: 0x110000" \
|
1538 |
|
|
" length: 0x10000" \
|
1539 |
|
|
" status: 0x0" \
|
1540 |
|
|
" time taken:" \
|
1541 |
|
|
"Execution step completed OK." \
|
1542 |
|
|
"Test completed successfully."] \
|
1543 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1544 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "10000" \
|
1545 |
|
|
"GO_COMMAND_READ" "10000" "READ_COMMAND"
|
1546 |
|
|
|
1547 |
|
|
# READ_COMMAND to advance address after reading 1 word (4 bytes) for WishBone
|
1548 |
|
|
# (access type 6)
|
1549 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 1 word address advance" \
|
1550 |
|
|
[list "Initalization succeeded." \
|
1551 |
|
|
"Execution step completed OK." \
|
1552 |
|
|
"Resetting JTAG." \
|
1553 |
|
|
"Execution step completed OK." \
|
1554 |
|
|
"Shifting instruction." \
|
1555 |
|
|
" shifting in: 0x01" \
|
1556 |
|
|
" shifted out: 0x01" \
|
1557 |
|
|
" time taken:" \
|
1558 |
|
|
"Execution step completed OK." \
|
1559 |
|
|
"Selecting module." \
|
1560 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1561 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1562 |
|
|
" status: 0x0" \
|
1563 |
|
|
" time taken:" \
|
1564 |
|
|
"Execution step completed OK." \
|
1565 |
|
|
"Processing WRITE_COMMAND." \
|
1566 |
|
|
" shifting in: 0x00000000001039e5cf800000001000c8" \
|
1567 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1568 |
|
|
" status: 0x0" \
|
1569 |
|
|
" time taken:" \
|
1570 |
|
|
"Execution step completed OK." \
|
1571 |
|
|
"Processing GO_COMMAND_READ." \
|
1572 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
1573 |
|
|
" shifted out: 0x019de5beae190911010000000000" \
|
1574 |
|
|
" data: 10111213" \
|
1575 |
|
|
" status: 0x0" \
|
1576 |
|
|
" time taken:" \
|
1577 |
|
|
"Execution step completed OK." \
|
1578 |
|
|
"Processing READ_COMMAND." \
|
1579 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1580 |
|
|
" shifted out: 0x02b83324c1800040001000c000000000" \
|
1581 |
|
|
" access_type: 0x6" \
|
1582 |
|
|
" address: 0x100004" \
|
1583 |
|
|
" length: 0x4" \
|
1584 |
|
|
" status: 0x0" \
|
1585 |
|
|
" time taken:" \
|
1586 |
|
|
"Execution step completed OK." \
|
1587 |
|
|
"Test completed successfully."] \
|
1588 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1589 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "4" \
|
1590 |
|
|
"GO_COMMAND_READ" "4" "READ_COMMAND"
|
1591 |
|
|
|
1592 |
|
|
# READ_COMMAND to advance address after reading 2 words (8 bytes) for WishBone
|
1593 |
|
|
# (access type 6)
|
1594 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 2 words address advance" \
|
1595 |
|
|
[list "Initalization succeeded." \
|
1596 |
|
|
"Execution step completed OK." \
|
1597 |
|
|
"Resetting JTAG." \
|
1598 |
|
|
"Execution step completed OK." \
|
1599 |
|
|
"Shifting instruction." \
|
1600 |
|
|
" shifting in: 0x01" \
|
1601 |
|
|
" shifted out: 0x01" \
|
1602 |
|
|
" time taken:" \
|
1603 |
|
|
"Execution step completed OK." \
|
1604 |
|
|
"Selecting module." \
|
1605 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1606 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1607 |
|
|
" status: 0x0" \
|
1608 |
|
|
" time taken:" \
|
1609 |
|
|
"Execution step completed OK." \
|
1610 |
|
|
"Processing WRITE_COMMAND." \
|
1611 |
|
|
" shifting in: 0x000000000066e5a45fc00000001000c8" \
|
1612 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1613 |
|
|
" status: 0x0" \
|
1614 |
|
|
" time taken:" \
|
1615 |
|
|
"Execution step completed OK." \
|
1616 |
|
|
"Processing GO_COMMAND_READ." \
|
1617 |
|
|
" shifting in: 0x00000000000000000000000000169330ba20" \
|
1618 |
|
|
" shifted out: 0x003458d6401d0d1505190911010000000000" \
|
1619 |
|
|
" data: 1011121314151617" \
|
1620 |
|
|
" status: 0x0" \
|
1621 |
|
|
" time taken:" \
|
1622 |
|
|
"Execution step completed OK." \
|
1623 |
|
|
"Processing READ_COMMAND." \
|
1624 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1625 |
|
|
" shifted out: 0x1f3128ca61c00020001000c000000000" \
|
1626 |
|
|
" access_type: 0x6" \
|
1627 |
|
|
" address: 0x100008" \
|
1628 |
|
|
" length: 0x8" \
|
1629 |
|
|
" status: 0x0" \
|
1630 |
|
|
" time taken:" \
|
1631 |
|
|
"Execution step completed OK." \
|
1632 |
|
|
"Test completed successfully."] \
|
1633 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1634 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "8" \
|
1635 |
|
|
"GO_COMMAND_READ" "8" "READ_COMMAND"
|
1636 |
|
|
|
1637 |
|
|
# READ_COMMAND to advance address after reading 3 words (12 bytes) for WishBone
|
1638 |
|
|
# (access type 6)
|
1639 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 3 words address advance" \
|
1640 |
|
|
[list "Initalization succeeded." \
|
1641 |
|
|
"Execution step completed OK." \
|
1642 |
|
|
"Resetting JTAG." \
|
1643 |
|
|
"Execution step completed OK." \
|
1644 |
|
|
"Shifting instruction." \
|
1645 |
|
|
" shifting in: 0x01" \
|
1646 |
|
|
" shifted out: 0x01" \
|
1647 |
|
|
" time taken:" \
|
1648 |
|
|
"Execution step completed OK." \
|
1649 |
|
|
"Selecting module." \
|
1650 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1651 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1652 |
|
|
" status: 0x0" \
|
1653 |
|
|
" time taken:" \
|
1654 |
|
|
"Execution step completed OK." \
|
1655 |
|
|
"Processing WRITE_COMMAND." \
|
1656 |
|
|
" shifting in: 0x00000000002b57c507a00000001000c8" \
|
1657 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1658 |
|
|
" status: 0x0" \
|
1659 |
|
|
" time taken:" \
|
1660 |
|
|
"Execution step completed OK." \
|
1661 |
|
|
"Processing GO_COMMAND_READ." \
|
1662 |
|
|
" shifting in: 0x0000000000000000000000000000000000169330ba20" \
|
1663 |
|
|
" shifted out: 0x00248290b61b0b13031d0d1505190911010000000000" \
|
1664 |
|
|
" data: 101112131415161718191a1b" \
|
1665 |
|
|
" status: 0x0" \
|
1666 |
|
|
" time taken:" \
|
1667 |
|
|
"Execution step completed OK." \
|
1668 |
|
|
"Processing READ_COMMAND." \
|
1669 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1670 |
|
|
" shifted out: 0x0c609870e1a00060001000c000000000" \
|
1671 |
|
|
" access_type: 0x6" \
|
1672 |
|
|
" address: 0x10000c" \
|
1673 |
|
|
" length: 0xc" \
|
1674 |
|
|
" status: 0x0" \
|
1675 |
|
|
" time taken:" \
|
1676 |
|
|
"Execution step completed OK." \
|
1677 |
|
|
"Test completed successfully."] \
|
1678 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1679 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "c" \
|
1680 |
|
|
"GO_COMMAND_READ" "c" "READ_COMMAND"
|
1681 |
|
|
|
1682 |
|
|
# READ_COMMAND to advance address after reading 0x3fff words (0xfffc bytes)
|
1683 |
|
|
# for WishBone (access type 6)
|
1684 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 0x3fff words address advance" \
|
1685 |
|
|
[list "Initalization succeeded." \
|
1686 |
|
|
"Execution step completed OK." \
|
1687 |
|
|
"Resetting JTAG." \
|
1688 |
|
|
"Execution step completed OK." \
|
1689 |
|
|
"Shifting instruction." \
|
1690 |
|
|
" shifting in: 0x01" \
|
1691 |
|
|
" shifted out: 0x01" \
|
1692 |
|
|
" time taken:" \
|
1693 |
|
|
"Execution step completed OK." \
|
1694 |
|
|
"Selecting module." \
|
1695 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1696 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1697 |
|
|
" status: 0x0" \
|
1698 |
|
|
" time taken:" \
|
1699 |
|
|
"Execution step completed OK." \
|
1700 |
|
|
"Processing WRITE_COMMAND." \
|
1701 |
|
|
" shifting in: 0x00000000002c6004c1bffe00001000c8" \
|
1702 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1703 |
|
|
" status: 0x0" \
|
1704 |
|
|
" time taken:" \
|
1705 |
|
|
"Execution step completed OK." \
|
1706 |
|
|
"Processing GO_COMMAND_READ." \
|
1707 |
|
|
" shifting in: 0x00000000000000000000000000000000000000000000000" \
|
1708 |
|
|
" shifted out: 0x00588773a80000000000000000000000000000000000000" \
|
1709 |
|
|
" data: 101112131415161718191a1b1c1d1e1f00000000000000000" \
|
1710 |
|
|
" status: 0x0" \
|
1711 |
|
|
" time taken:" \
|
1712 |
|
|
"Execution step completed OK." \
|
1713 |
|
|
"Processing READ_COMMAND." \
|
1714 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1715 |
|
|
" shifted out: 0x1a7aa37121bffe7ffe1000c000000000" \
|
1716 |
|
|
" access_type: 0x6" \
|
1717 |
|
|
" address: 0x10fffc" \
|
1718 |
|
|
" length: 0xfffc" \
|
1719 |
|
|
" status: 0x0" \
|
1720 |
|
|
" time taken:" \
|
1721 |
|
|
"Execution step completed OK." \
|
1722 |
|
|
"Test completed successfully."] \
|
1723 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1724 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "fffc" \
|
1725 |
|
|
"GO_COMMAND_READ" "fffc" "READ_COMMAND"
|
1726 |
|
|
|
1727 |
|
|
# READ_COMMAND to advance address after reading 0x4000 words (0x10000 bytes)
|
1728 |
|
|
# for WishBone (access type 6)
|
1729 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB read 0x400 words address advance" \
|
1730 |
|
|
[list "Initalization succeeded." \
|
1731 |
|
|
"Execution step completed OK." \
|
1732 |
|
|
"Resetting JTAG." \
|
1733 |
|
|
"Execution step completed OK." \
|
1734 |
|
|
"Shifting instruction." \
|
1735 |
|
|
" shifting in: 0x01" \
|
1736 |
|
|
" shifted out: 0x01" \
|
1737 |
|
|
" time taken:" \
|
1738 |
|
|
"Execution step completed OK." \
|
1739 |
|
|
"Selecting module." \
|
1740 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1741 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1742 |
|
|
" status: 0x0" \
|
1743 |
|
|
" time taken:" \
|
1744 |
|
|
"Execution step completed OK." \
|
1745 |
|
|
"Processing WRITE_COMMAND." \
|
1746 |
|
|
" shifting in: 0x00000000005abc4551fffe00001000c8" \
|
1747 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1748 |
|
|
" status: 0x0" \
|
1749 |
|
|
" time taken:" \
|
1750 |
|
|
"Execution step completed OK." \
|
1751 |
|
|
"Processing GO_COMMAND_READ." \
|
1752 |
|
|
" shifting in: 0x00000000000000000000000000000000000000000000000" \
|
1753 |
|
|
" shifted out: 0x01146b36e80000000000000000000000000000000000000" \
|
1754 |
|
|
" data: 101112131415161718191a1b1c1d1e1f00000000000000000" \
|
1755 |
|
|
" status: 0x0" \
|
1756 |
|
|
" time taken:" \
|
1757 |
|
|
"Execution step completed OK." \
|
1758 |
|
|
"Processing READ_COMMAND." \
|
1759 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1760 |
|
|
" shifted out: 0x133b9b3221fffe00011000c000000000" \
|
1761 |
|
|
" access_type: 0x6" \
|
1762 |
|
|
" address: 0x110000" \
|
1763 |
|
|
" length: 0x10000" \
|
1764 |
|
|
" status: 0x0" \
|
1765 |
|
|
" time taken:" \
|
1766 |
|
|
"Execution step completed OK." \
|
1767 |
|
|
"Test completed successfully."] \
|
1768 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1769 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "10000" \
|
1770 |
|
|
"GO_COMMAND_READ" "10000" "READ_COMMAND"
|
1771 |
|
|
|
1772 |
|
|
# READ_COMMAND to advance address after reading 1 word for CPU0
|
1773 |
|
|
# (access type 2). The address should advance by 1 (word, since SPRs are word
|
1774 |
|
|
# addressed).
|
1775 |
|
|
run_libsim "JTAG GO_COMMAND (read) CPU0 read 1 word address advance" \
|
1776 |
|
|
[list "Initalization succeeded." \
|
1777 |
|
|
"Execution step completed OK." \
|
1778 |
|
|
"Resetting JTAG." \
|
1779 |
|
|
"Execution step completed OK." \
|
1780 |
|
|
"Shifting instruction." \
|
1781 |
|
|
" shifting in: 0x01" \
|
1782 |
|
|
" shifted out: 0x01" \
|
1783 |
|
|
" time taken:" \
|
1784 |
|
|
"Execution step completed OK." \
|
1785 |
|
|
"Selecting module." \
|
1786 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1787 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1788 |
|
|
" status: 0x0" \
|
1789 |
|
|
" time taken:" \
|
1790 |
|
|
"Execution step completed OK." \
|
1791 |
|
|
"Processing WRITE_COMMAND." \
|
1792 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
1793 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1794 |
|
|
" status: 0x0" \
|
1795 |
|
|
" time taken:" \
|
1796 |
|
|
"Execution step completed OK." \
|
1797 |
|
|
"Processing GO_COMMAND_READ." \
|
1798 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
1799 |
|
|
" shifted out: 0x00b8e2228e0f76afbee000000000" \
|
1800 |
|
|
" data: efbeadde" \
|
1801 |
|
|
" status: 0x0" \
|
1802 |
|
|
" time taken:" \
|
1803 |
|
|
"Execution step completed OK." \
|
1804 |
|
|
"Processing READ_COMMAND." \
|
1805 |
|
|
" shifting in: 0x00000000000000000000000b2420de30" \
|
1806 |
|
|
" shifted out: 0x1df679cc01800080280000c000000000" \
|
1807 |
|
|
" access_type: 0x6" \
|
1808 |
|
|
" address: 0x2802" \
|
1809 |
|
|
" length: 0x4" \
|
1810 |
|
|
" status: 0x0" \
|
1811 |
|
|
" time taken:" \
|
1812 |
|
|
"Execution step completed OK." \
|
1813 |
|
|
"Test completed successfully."] \
|
1814 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1815 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4" \
|
1816 |
|
|
"GO_COMMAND_READ" "4" "READ_COMMAND"
|
1817 |
|
|
|
1818 |
|
|
# Tests of overrun and underrun. For Wishbone check both on different access
|
1819 |
|
|
# sizes.
|
1820 |
|
|
|
1821 |
|
|
# GO_COMMAND_READ for WishBone underrun for byte access
|
1822 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB byte access underrun" \
|
1823 |
|
|
[list "Initalization succeeded." \
|
1824 |
|
|
"Execution step completed OK." \
|
1825 |
|
|
"Resetting JTAG." \
|
1826 |
|
|
"Execution step completed OK." \
|
1827 |
|
|
"Shifting instruction." \
|
1828 |
|
|
" shifting in: 0x01" \
|
1829 |
|
|
" shifted out: 0x01" \
|
1830 |
|
|
" time taken:" \
|
1831 |
|
|
"Execution step completed OK." \
|
1832 |
|
|
"Selecting module." \
|
1833 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1834 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1835 |
|
|
" status: 0x0" \
|
1836 |
|
|
" time taken:" \
|
1837 |
|
|
"Execution step completed OK." \
|
1838 |
|
|
"Processing WRITE_COMMAND." \
|
1839 |
|
|
" shifting in: 0x0000000000eef34eadc0000000100048" \
|
1840 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1841 |
|
|
" status: 0x0" \
|
1842 |
|
|
" time taken:" \
|
1843 |
|
|
"Execution step completed OK." \
|
1844 |
|
|
"Processing GO_COMMAND_READ." \
|
1845 |
|
|
" shifting in: 0x000000000000000000000000169330ba20" \
|
1846 |
|
|
" shifted out: 0x000d619cbc2d1505190911010000000000" \
|
1847 |
|
|
" data: 10111213141516" \
|
1848 |
|
|
" status: 0x8" \
|
1849 |
|
|
" time taken:" \
|
1850 |
|
|
"Execution step completed OK." \
|
1851 |
|
|
"Test completed successfully."] \
|
1852 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1853 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "8" \
|
1854 |
|
|
"GO_COMMAND_READ" "7"
|
1855 |
|
|
|
1856 |
|
|
# GO_COMMAND_READ for WishBone overrun for byte access
|
1857 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB byte access overrun" \
|
1858 |
|
|
[list "Initalization succeeded." \
|
1859 |
|
|
"Execution step completed OK." \
|
1860 |
|
|
"Resetting JTAG." \
|
1861 |
|
|
"Execution step completed OK." \
|
1862 |
|
|
"Shifting instruction." \
|
1863 |
|
|
" shifting in: 0x01" \
|
1864 |
|
|
" shifted out: 0x01" \
|
1865 |
|
|
" time taken:" \
|
1866 |
|
|
"Execution step completed OK." \
|
1867 |
|
|
"Selecting module." \
|
1868 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1869 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1870 |
|
|
" status: 0x0" \
|
1871 |
|
|
" time taken:" \
|
1872 |
|
|
"Execution step completed OK." \
|
1873 |
|
|
"Processing WRITE_COMMAND." \
|
1874 |
|
|
" shifting in: 0x0000000000eef34eadc0000000100048" \
|
1875 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1876 |
|
|
" status: 0x0" \
|
1877 |
|
|
" time taken:" \
|
1878 |
|
|
"Execution step completed OK." \
|
1879 |
|
|
"Processing GO_COMMAND_READ." \
|
1880 |
|
|
" shifting in: 0x0000000000000000000000000000169330ba20" \
|
1881 |
|
|
" shifted out: 0x004d86398e201d0d1505190911010000000000" \
|
1882 |
|
|
" data: 101112131415161700" \
|
1883 |
|
|
" status: 0x8" \
|
1884 |
|
|
" time taken:" \
|
1885 |
|
|
"Execution step completed OK." \
|
1886 |
|
|
"Test completed successfully."] \
|
1887 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1888 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "8" \
|
1889 |
|
|
"GO_COMMAND_READ" "9"
|
1890 |
|
|
|
1891 |
|
|
# GO_COMMAND_READ for WishBone underrun for half word access
|
1892 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB half word access underrun" \
|
1893 |
|
|
[list "Initalization succeeded." \
|
1894 |
|
|
"Execution step completed OK." \
|
1895 |
|
|
"Resetting JTAG." \
|
1896 |
|
|
"Execution step completed OK." \
|
1897 |
|
|
"Shifting instruction." \
|
1898 |
|
|
" shifting in: 0x01" \
|
1899 |
|
|
" shifted out: 0x01" \
|
1900 |
|
|
" time taken:" \
|
1901 |
|
|
"Execution step completed OK." \
|
1902 |
|
|
"Selecting module." \
|
1903 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1904 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1905 |
|
|
" status: 0x0" \
|
1906 |
|
|
" time taken:" \
|
1907 |
|
|
"Execution step completed OK." \
|
1908 |
|
|
"Processing WRITE_COMMAND." \
|
1909 |
|
|
" shifting in: 0x0000000001fede9b49c0000000100148" \
|
1910 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1911 |
|
|
" status: 0x0" \
|
1912 |
|
|
" time taken:" \
|
1913 |
|
|
"Execution step completed OK." \
|
1914 |
|
|
"Processing GO_COMMAND_READ." \
|
1915 |
|
|
" shifting in: 0x000000000000000000000000169330ba20" \
|
1916 |
|
|
" shifted out: 0x000d619cbc2d1505190911010000000000" \
|
1917 |
|
|
" data: 10111213141516" \
|
1918 |
|
|
" status: 0x8" \
|
1919 |
|
|
" time taken:" \
|
1920 |
|
|
"Execution step completed OK." \
|
1921 |
|
|
"Test completed successfully."] \
|
1922 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1923 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "8" \
|
1924 |
|
|
"GO_COMMAND_READ" "7"
|
1925 |
|
|
|
1926 |
|
|
# GO_COMMAND_READ for WishBone overrun for half word access
|
1927 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB half word access overrun" \
|
1928 |
|
|
[list "Initalization succeeded." \
|
1929 |
|
|
"Execution step completed OK." \
|
1930 |
|
|
"Resetting JTAG." \
|
1931 |
|
|
"Execution step completed OK." \
|
1932 |
|
|
"Shifting instruction." \
|
1933 |
|
|
" shifting in: 0x01" \
|
1934 |
|
|
" shifted out: 0x01" \
|
1935 |
|
|
" time taken:" \
|
1936 |
|
|
"Execution step completed OK." \
|
1937 |
|
|
"Selecting module." \
|
1938 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1939 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1940 |
|
|
" status: 0x0" \
|
1941 |
|
|
" time taken:" \
|
1942 |
|
|
"Execution step completed OK." \
|
1943 |
|
|
"Processing WRITE_COMMAND." \
|
1944 |
|
|
" shifting in: 0x0000000001fede9b49c0000000100148" \
|
1945 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1946 |
|
|
" status: 0x0" \
|
1947 |
|
|
" time taken:" \
|
1948 |
|
|
"Execution step completed OK." \
|
1949 |
|
|
"Processing GO_COMMAND_READ." \
|
1950 |
|
|
" shifting in: 0x0000000000000000000000000000169330ba20" \
|
1951 |
|
|
" shifted out: 0x004d86398e201d0d1505190911010000000000" \
|
1952 |
|
|
" data: 101112131415161700" \
|
1953 |
|
|
" status: 0x8" \
|
1954 |
|
|
" time taken:" \
|
1955 |
|
|
"Execution step completed OK." \
|
1956 |
|
|
"Test completed successfully."] \
|
1957 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1958 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "8" \
|
1959 |
|
|
"GO_COMMAND_READ" "9"
|
1960 |
|
|
|
1961 |
|
|
# GO_COMMAND_READ for WishBone underrun for word access
|
1962 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB word access underrun" \
|
1963 |
|
|
[list "Initalization succeeded." \
|
1964 |
|
|
"Execution step completed OK." \
|
1965 |
|
|
"Resetting JTAG." \
|
1966 |
|
|
"Execution step completed OK." \
|
1967 |
|
|
"Shifting instruction." \
|
1968 |
|
|
" shifting in: 0x01" \
|
1969 |
|
|
" shifted out: 0x01" \
|
1970 |
|
|
" time taken:" \
|
1971 |
|
|
"Execution step completed OK." \
|
1972 |
|
|
"Selecting module." \
|
1973 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1974 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1975 |
|
|
" status: 0x0" \
|
1976 |
|
|
" time taken:" \
|
1977 |
|
|
"Execution step completed OK." \
|
1978 |
|
|
"Processing WRITE_COMMAND." \
|
1979 |
|
|
" shifting in: 0x000000000066e5a45fc00000001000c8" \
|
1980 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1981 |
|
|
" status: 0x0" \
|
1982 |
|
|
" time taken:" \
|
1983 |
|
|
"Execution step completed OK." \
|
1984 |
|
|
"Processing GO_COMMAND_READ." \
|
1985 |
|
|
" shifting in: 0x000000000000000000000000169330ba20" \
|
1986 |
|
|
" shifted out: 0x000d619cbc2d1505190911010000000000" \
|
1987 |
|
|
" data: 10111213141516" \
|
1988 |
|
|
" status: 0x8" \
|
1989 |
|
|
" time taken:" \
|
1990 |
|
|
"Execution step completed OK." \
|
1991 |
|
|
"Test completed successfully."] \
|
1992 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1993 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "8" \
|
1994 |
|
|
"GO_COMMAND_READ" "7"
|
1995 |
|
|
|
1996 |
|
|
# GO_COMMAND_READ for WishBone overrun for word access
|
1997 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB word access overrun" \
|
1998 |
|
|
[list "Initalization succeeded." \
|
1999 |
|
|
"Execution step completed OK." \
|
2000 |
|
|
"Resetting JTAG." \
|
2001 |
|
|
"Execution step completed OK." \
|
2002 |
|
|
"Shifting instruction." \
|
2003 |
|
|
" shifting in: 0x01" \
|
2004 |
|
|
" shifted out: 0x01" \
|
2005 |
|
|
" time taken:" \
|
2006 |
|
|
"Execution step completed OK." \
|
2007 |
|
|
"Selecting module." \
|
2008 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2009 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2010 |
|
|
" status: 0x0" \
|
2011 |
|
|
" time taken:" \
|
2012 |
|
|
"Execution step completed OK." \
|
2013 |
|
|
"Processing WRITE_COMMAND." \
|
2014 |
|
|
" shifting in: 0x000000000066e5a45fc00000001000c8" \
|
2015 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2016 |
|
|
" status: 0x0" \
|
2017 |
|
|
" time taken:" \
|
2018 |
|
|
"Execution step completed OK." \
|
2019 |
|
|
"Processing GO_COMMAND_READ." \
|
2020 |
|
|
" shifting in: 0x0000000000000000000000000000169330ba20" \
|
2021 |
|
|
" shifted out: 0x004d86398e201d0d1505190911010000000000" \
|
2022 |
|
|
" data: 101112131415161700" \
|
2023 |
|
|
" status: 0x8" \
|
2024 |
|
|
" time taken:" \
|
2025 |
|
|
"Execution step completed OK." \
|
2026 |
|
|
"Test completed successfully."] \
|
2027 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2028 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "8" \
|
2029 |
|
|
"GO_COMMAND_READ" "9"
|
2030 |
|
|
|
2031 |
|
|
# CPU0 underrun and overrun tests should remember that this is a 32-bit access
|
2032 |
|
|
# with a big-endian organization.
|
2033 |
|
|
|
2034 |
|
|
# GO_COMMAND_READ for CPU0 underrun for word access
|
2035 |
|
|
run_libsim "JTAG GO_COMMAND (read) CPU0 word access underrun" \
|
2036 |
|
|
[list "Initalization succeeded." \
|
2037 |
|
|
"Execution step completed OK." \
|
2038 |
|
|
"Resetting JTAG." \
|
2039 |
|
|
"Execution step completed OK." \
|
2040 |
|
|
"Shifting instruction." \
|
2041 |
|
|
" shifting in: 0x01" \
|
2042 |
|
|
" shifted out: 0x01" \
|
2043 |
|
|
" time taken:" \
|
2044 |
|
|
"Execution step completed OK." \
|
2045 |
|
|
"Selecting module." \
|
2046 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
2047 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2048 |
|
|
" status: 0x0" \
|
2049 |
|
|
" time taken:" \
|
2050 |
|
|
"Execution step completed OK." \
|
2051 |
|
|
"Processing WRITE_COMMAND." \
|
2052 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
2053 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2054 |
|
|
" status: 0x0" \
|
2055 |
|
|
" time taken:" \
|
2056 |
|
|
"Execution step completed OK." \
|
2057 |
|
|
"Processing GO_COMMAND_READ." \
|
2058 |
|
|
" shifting in: 0x0000000000000000169330ba20" \
|
2059 |
|
|
" shifted out: 0x00295bc0a836afbee000000000" \
|
2060 |
|
|
" data: efbead" \
|
2061 |
|
|
" status: 0x8" \
|
2062 |
|
|
" time taken:" \
|
2063 |
|
|
"Execution step completed OK." \
|
2064 |
|
|
"Test completed successfully."] \
|
2065 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2066 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4" \
|
2067 |
|
|
"GO_COMMAND_READ" "3"
|
2068 |
|
|
|
2069 |
|
|
# GO_COMMAND_READ for CPU0 overrun for word access
|
2070 |
|
|
run_libsim "JTAG GO_COMMAND (read) CPU0 word access overrun" \
|
2071 |
|
|
[list "Initalization succeeded." \
|
2072 |
|
|
"Execution step completed OK." \
|
2073 |
|
|
"Resetting JTAG." \
|
2074 |
|
|
"Execution step completed OK." \
|
2075 |
|
|
"Shifting instruction." \
|
2076 |
|
|
" shifting in: 0x01" \
|
2077 |
|
|
" shifted out: 0x01" \
|
2078 |
|
|
" time taken:" \
|
2079 |
|
|
"Execution step completed OK." \
|
2080 |
|
|
"Selecting module." \
|
2081 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
2082 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2083 |
|
|
" status: 0x0" \
|
2084 |
|
|
" time taken:" \
|
2085 |
|
|
"Execution step completed OK." \
|
2086 |
|
|
"Processing WRITE_COMMAND." \
|
2087 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
2088 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2089 |
|
|
" status: 0x0" \
|
2090 |
|
|
" time taken:" \
|
2091 |
|
|
"Execution step completed OK." \
|
2092 |
|
|
"Processing GO_COMMAND_READ." \
|
2093 |
|
|
" shifting in: 0x00000000000000000000169330ba20" \
|
2094 |
|
|
" shifted out: 0x01eaa76a8c200f76afbee000000000" \
|
2095 |
|
|
" data: efbeadde00" \
|
2096 |
|
|
" status: 0x8" \
|
2097 |
|
|
" time taken:" \
|
2098 |
|
|
"Execution step completed OK." \
|
2099 |
|
|
"Test completed successfully."] \
|
2100 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2101 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4" \
|
2102 |
|
|
"GO_COMMAND_READ" "5"
|
2103 |
|
|
|
2104 |
|
|
# Test access to invalid areas. We can only do this for Wishbone, since all
|
2105 |
|
|
# SPRs are validly accessible (non-readable ones just return undefined
|
2106 |
|
|
# results). For the default CFG we have the following memory areas.
|
2107 |
|
|
# 0x00000000 - 0x001fffff RAM (read/write)
|
2108 |
|
|
# 0xf0000000 - 0xf01fffff Flash (read only)
|
2109 |
|
|
# 0xffe00000 - 0xffffffff RAM (read/write)
|
2110 |
|
|
|
2111 |
|
|
# For convenience the top 8 bytes of the each block of RAM (0x001ffff8 -
|
2112 |
|
|
# 0x001fffff) and (0xfffffff8 - 0xffffffff) and the bottom 8 bytes of the
|
2113 |
|
|
# second block of RAM (0xffe00000 - 0xffe00007) are initialized to
|
2114 |
|
|
# 0xdeadbeefcafebabe.
|
2115 |
|
|
|
2116 |
|
|
# Test each access type with one unit and test blocks spanning start and end
|
2117 |
|
|
# of readable blocks.
|
2118 |
|
|
|
2119 |
|
|
# GO_COMMAND_READ for 1 byte read from invalid memory.
|
2120 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 byte invalid read" \
|
2121 |
|
|
[list "Initalization succeeded." \
|
2122 |
|
|
"Execution step completed OK." \
|
2123 |
|
|
"Resetting JTAG." \
|
2124 |
|
|
"Execution step completed OK." \
|
2125 |
|
|
"Shifting instruction." \
|
2126 |
|
|
" shifting in: 0x01" \
|
2127 |
|
|
" shifted out: 0x01" \
|
2128 |
|
|
" time taken:" \
|
2129 |
|
|
"Execution step completed OK." \
|
2130 |
|
|
"Selecting module." \
|
2131 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2132 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2133 |
|
|
" status: 0x0" \
|
2134 |
|
|
" time taken:" \
|
2135 |
|
|
"Execution step completed OK." \
|
2136 |
|
|
"Processing WRITE_COMMAND." \
|
2137 |
|
|
" shifting in: 0x00000000002507505e00000000080048" \
|
2138 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2139 |
|
|
" status: 0x0" \
|
2140 |
|
|
" time taken:" \
|
2141 |
|
|
"Execution step completed OK." \
|
2142 |
|
|
"Processing GO_COMMAND_READ." \
|
2143 |
|
|
" shifting in: 0x000000000000169330ba20" \
|
2144 |
|
|
" shifted out: 0x0005bfa20e400000000000" \
|
2145 |
|
|
" data: 00" \
|
2146 |
|
|
" status: 0x4" \
|
2147 |
|
|
" time taken:" \
|
2148 |
|
|
"Execution step completed OK." \
|
2149 |
|
|
"Test completed successfully."] \
|
2150 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2151 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "200000" "1" \
|
2152 |
|
|
"GO_COMMAND_READ" "1"
|
2153 |
|
|
|
2154 |
|
|
# GO_COMMAND_READ for 2 byte read ending in invalid memory.
|
2155 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 2 byte ending invalid read" \
|
2156 |
|
|
[list "Initalization succeeded." \
|
2157 |
|
|
"Execution step completed OK." \
|
2158 |
|
|
"Resetting JTAG." \
|
2159 |
|
|
"Execution step completed OK." \
|
2160 |
|
|
"Shifting instruction." \
|
2161 |
|
|
" shifting in: 0x01" \
|
2162 |
|
|
" shifted out: 0x01" \
|
2163 |
|
|
" time taken:" \
|
2164 |
|
|
"Execution step completed OK." \
|
2165 |
|
|
"Selecting module." \
|
2166 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2167 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2168 |
|
|
" status: 0x0" \
|
2169 |
|
|
" time taken:" \
|
2170 |
|
|
"Execution step completed OK." \
|
2171 |
|
|
"Processing WRITE_COMMAND." \
|
2172 |
|
|
" shifting in: 0x000000000024c5489f0001fffff00048" \
|
2173 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2174 |
|
|
" status: 0x0" \
|
2175 |
|
|
" time taken:" \
|
2176 |
|
|
"Execution step completed OK." \
|
2177 |
|
|
"Processing GO_COMMAND_READ." \
|
2178 |
|
|
" shifting in: 0x00000000000000169330ba20" \
|
2179 |
|
|
" shifted out: 0x01e489dbde400fa000000000" \
|
2180 |
|
|
" data: be00" \
|
2181 |
|
|
" status: 0x4" \
|
2182 |
|
|
" time taken:" \
|
2183 |
|
|
"Execution step completed OK." \
|
2184 |
|
|
"Test completed successfully."] \
|
2185 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2186 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "1fffff" "2" \
|
2187 |
|
|
"GO_COMMAND_READ" "2"
|
2188 |
|
|
|
2189 |
|
|
# GO_COMMAND_READ for 2 byte read starting in invalid memory.
|
2190 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 2 byte starting invalid read" \
|
2191 |
|
|
[list "Initalization succeeded." \
|
2192 |
|
|
"Execution step completed OK." \
|
2193 |
|
|
"Resetting JTAG." \
|
2194 |
|
|
"Execution step completed OK." \
|
2195 |
|
|
"Shifting instruction." \
|
2196 |
|
|
" shifting in: 0x01" \
|
2197 |
|
|
" shifted out: 0x01" \
|
2198 |
|
|
" time taken:" \
|
2199 |
|
|
"Execution step completed OK." \
|
2200 |
|
|
"Selecting module." \
|
2201 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2202 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2203 |
|
|
" status: 0x0" \
|
2204 |
|
|
" time taken:" \
|
2205 |
|
|
"Execution step completed OK." \
|
2206 |
|
|
"Processing WRITE_COMMAND." \
|
2207 |
|
|
" shifting in: 0x0000000001620ceaa70001fffff7fe48" \
|
2208 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2209 |
|
|
" status: 0x0" \
|
2210 |
|
|
" time taken:" \
|
2211 |
|
|
"Execution step completed OK." \
|
2212 |
|
|
"Processing GO_COMMAND_READ." \
|
2213 |
|
|
" shifting in: 0x00000000000000169330ba20" \
|
2214 |
|
|
" shifted out: 0x00945aea064f600000000000" \
|
2215 |
|
|
" data: 00de" \
|
2216 |
|
|
" status: 0x4" \
|
2217 |
|
|
" time taken:" \
|
2218 |
|
|
"Execution step completed OK." \
|
2219 |
|
|
"Test completed successfully."] \
|
2220 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2221 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "ffdfffff" "2" \
|
2222 |
|
|
"GO_COMMAND_READ" "2"
|
2223 |
|
|
|
2224 |
|
|
# GO_COMMAND_READ for 1 half word read from invalid memory.
|
2225 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 half word invalid read" \
|
2226 |
|
|
[list "Initalization succeeded." \
|
2227 |
|
|
"Execution step completed OK." \
|
2228 |
|
|
"Resetting JTAG." \
|
2229 |
|
|
"Execution step completed OK." \
|
2230 |
|
|
"Shifting instruction." \
|
2231 |
|
|
" shifting in: 0x01" \
|
2232 |
|
|
" shifted out: 0x01" \
|
2233 |
|
|
" time taken:" \
|
2234 |
|
|
"Execution step completed OK." \
|
2235 |
|
|
"Selecting module." \
|
2236 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2237 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2238 |
|
|
" status: 0x0" \
|
2239 |
|
|
" time taken:" \
|
2240 |
|
|
"Execution step completed OK." \
|
2241 |
|
|
"Processing WRITE_COMMAND." \
|
2242 |
|
|
" shifting in: 0x0000000000ee5b83fb00000000080148" \
|
2243 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2244 |
|
|
" status: 0x0" \
|
2245 |
|
|
" time taken:" \
|
2246 |
|
|
"Execution step completed OK." \
|
2247 |
|
|
"Processing GO_COMMAND_READ." \
|
2248 |
|
|
" shifting in: 0x00000000000000169330ba20" \
|
2249 |
|
|
" shifted out: 0x0061189c3040000000000000" \
|
2250 |
|
|
" data: 0000" \
|
2251 |
|
|
" status: 0x4" \
|
2252 |
|
|
" time taken:" \
|
2253 |
|
|
"Execution step completed OK." \
|
2254 |
|
|
"Test completed successfully."] \
|
2255 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2256 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "200000" "2" \
|
2257 |
|
|
"GO_COMMAND_READ" "2"
|
2258 |
|
|
|
2259 |
|
|
# GO_COMMAND_READ for 2 half word read ending in invalid memory.
|
2260 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 2 half word ending invalid read" \
|
2261 |
|
|
[list "Initalization succeeded." \
|
2262 |
|
|
"Execution step completed OK." \
|
2263 |
|
|
"Resetting JTAG." \
|
2264 |
|
|
"Execution step completed OK." \
|
2265 |
|
|
"Shifting instruction." \
|
2266 |
|
|
" shifting in: 0x01" \
|
2267 |
|
|
" shifted out: 0x01" \
|
2268 |
|
|
" time taken:" \
|
2269 |
|
|
"Execution step completed OK." \
|
2270 |
|
|
"Selecting module." \
|
2271 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2272 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2273 |
|
|
" status: 0x0" \
|
2274 |
|
|
" time taken:" \
|
2275 |
|
|
"Execution step completed OK." \
|
2276 |
|
|
"Processing WRITE_COMMAND." \
|
2277 |
|
|
" shifting in: 0x00000000001b3a295b8000fffff00148" \
|
2278 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2279 |
|
|
" status: 0x0" \
|
2280 |
|
|
" time taken:" \
|
2281 |
|
|
"Execution step completed OK." \
|
2282 |
|
|
"Processing GO_COMMAND_READ." \
|
2283 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
2284 |
|
|
" shifted out: 0x011ad9043a40000faba000000000" \
|
2285 |
|
|
" data: babe0000" \
|
2286 |
|
|
" status: 0x4" \
|
2287 |
|
|
" time taken:" \
|
2288 |
|
|
"Execution step completed OK." \
|
2289 |
|
|
"Test completed successfully."] \
|
2290 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2291 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "1ffffe" "4" \
|
2292 |
|
|
"GO_COMMAND_READ" "4"
|
2293 |
|
|
|
2294 |
|
|
# GO_COMMAND_READ for 2 half word read starting in invalid memory.
|
2295 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 2 half word starting invalid read" \
|
2296 |
|
|
[list "Initalization succeeded." \
|
2297 |
|
|
"Execution step completed OK." \
|
2298 |
|
|
"Resetting JTAG." \
|
2299 |
|
|
"Execution step completed OK." \
|
2300 |
|
|
"Shifting instruction." \
|
2301 |
|
|
" shifting in: 0x01" \
|
2302 |
|
|
" shifted out: 0x01" \
|
2303 |
|
|
" time taken:" \
|
2304 |
|
|
"Execution step completed OK." \
|
2305 |
|
|
"Selecting module." \
|
2306 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2307 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2308 |
|
|
" status: 0x0" \
|
2309 |
|
|
" time taken:" \
|
2310 |
|
|
"Execution step completed OK." \
|
2311 |
|
|
"Processing WRITE_COMMAND." \
|
2312 |
|
|
" shifting in: 0x00000000015df38b638000fffff7ff48" \
|
2313 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2314 |
|
|
" status: 0x0" \
|
2315 |
|
|
" time taken:" \
|
2316 |
|
|
"Execution step completed OK." \
|
2317 |
|
|
"Processing GO_COMMAND_READ." \
|
2318 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
2319 |
|
|
" shifted out: 0x016e549cc256af60000000000000" \
|
2320 |
|
|
" data: 0000dead" \
|
2321 |
|
|
" status: 0x4" \
|
2322 |
|
|
" time taken:" \
|
2323 |
|
|
"Execution step completed OK." \
|
2324 |
|
|
"Test completed successfully."] \
|
2325 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2326 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "ffdffffe" "4" \
|
2327 |
|
|
"GO_COMMAND_READ" "4"
|
2328 |
|
|
|
2329 |
|
|
# GO_COMMAND_READ for 1 word read from invalid memory.
|
2330 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 1 word invalid read" \
|
2331 |
|
|
[list "Initalization succeeded." \
|
2332 |
|
|
"Execution step completed OK." \
|
2333 |
|
|
"Resetting JTAG." \
|
2334 |
|
|
"Execution step completed OK." \
|
2335 |
|
|
"Shifting instruction." \
|
2336 |
|
|
" shifting in: 0x01" \
|
2337 |
|
|
" shifted out: 0x01" \
|
2338 |
|
|
" time taken:" \
|
2339 |
|
|
"Execution step completed OK." \
|
2340 |
|
|
"Selecting module." \
|
2341 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2342 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2343 |
|
|
" status: 0x0" \
|
2344 |
|
|
" time taken:" \
|
2345 |
|
|
"Execution step completed OK." \
|
2346 |
|
|
"Processing WRITE_COMMAND." \
|
2347 |
|
|
" shifting in: 0x00000000019bd83fcd800000000800c8" \
|
2348 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2349 |
|
|
" status: 0x0" \
|
2350 |
|
|
" time taken:" \
|
2351 |
|
|
"Execution step completed OK." \
|
2352 |
|
|
"Processing GO_COMMAND_READ." \
|
2353 |
|
|
" shifting in: 0x000000000000000000169330ba20" \
|
2354 |
|
|
" shifted out: 0x0020b944d4400000000000000000" \
|
2355 |
|
|
" data: 00000000" \
|
2356 |
|
|
" status: 0x4" \
|
2357 |
|
|
" time taken:" \
|
2358 |
|
|
"Execution step completed OK." \
|
2359 |
|
|
"Test completed successfully."] \
|
2360 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2361 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "200000" "4" \
|
2362 |
|
|
"GO_COMMAND_READ" "4"
|
2363 |
|
|
|
2364 |
|
|
# GO_COMMAND_READ for 2 word read ending in invalid memory.
|
2365 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 2 word ending invalid read" \
|
2366 |
|
|
[list "Initalization succeeded." \
|
2367 |
|
|
"Execution step completed OK." \
|
2368 |
|
|
"Resetting JTAG." \
|
2369 |
|
|
"Execution step completed OK." \
|
2370 |
|
|
"Shifting instruction." \
|
2371 |
|
|
" shifting in: 0x01" \
|
2372 |
|
|
" shifted out: 0x01" \
|
2373 |
|
|
" time taken:" \
|
2374 |
|
|
"Execution step completed OK." \
|
2375 |
|
|
"Selecting module." \
|
2376 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2377 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2378 |
|
|
" status: 0x0" \
|
2379 |
|
|
" time taken:" \
|
2380 |
|
|
"Execution step completed OK." \
|
2381 |
|
|
"Processing WRITE_COMMAND." \
|
2382 |
|
|
" shifting in: 0x000000000114e84c5dc0007ffff000c8" \
|
2383 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2384 |
|
|
" status: 0x0" \
|
2385 |
|
|
" time taken:" \
|
2386 |
|
|
"Execution step completed OK." \
|
2387 |
|
|
"Processing GO_COMMAND_READ." \
|
2388 |
|
|
" shifting in: 0x00000000000000000000000000169330ba20" \
|
2389 |
|
|
" shifted out: 0x00f0f84a44400000000fabafea6000000000" \
|
2390 |
|
|
" data: cafebabe00000000" \
|
2391 |
|
|
" status: 0x4" \
|
2392 |
|
|
" time taken:" \
|
2393 |
|
|
"Execution step completed OK." \
|
2394 |
|
|
"Test completed successfully."] \
|
2395 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2396 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "1ffffc" "8" \
|
2397 |
|
|
"GO_COMMAND_READ" "8"
|
2398 |
|
|
|
2399 |
|
|
# GO_COMMAND_READ for 2 word read starting in invalid memory.
|
2400 |
|
|
run_libsim "JTAG GO_COMMAND (read) WB 2 word starting invalid read" \
|
2401 |
|
|
[list "Initalization succeeded." \
|
2402 |
|
|
"Execution step completed OK." \
|
2403 |
|
|
"Resetting JTAG." \
|
2404 |
|
|
"Execution step completed OK." \
|
2405 |
|
|
"Shifting instruction." \
|
2406 |
|
|
" shifting in: 0x01" \
|
2407 |
|
|
" shifted out: 0x01" \
|
2408 |
|
|
" time taken:" \
|
2409 |
|
|
"Execution step completed OK." \
|
2410 |
|
|
"Selecting module." \
|
2411 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
2412 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
2413 |
|
|
" status: 0x0" \
|
2414 |
|
|
" time taken:" \
|
2415 |
|
|
"Execution step completed OK." \
|
2416 |
|
|
"Processing WRITE_COMMAND." \
|
2417 |
|
|
" shifting in: 0x00000000005221ee65c0007ffff7fec8" \
|
2418 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
2419 |
|
|
" status: 0x0" \
|
2420 |
|
|
" time taken:" \
|
2421 |
|
|
"Execution step completed OK." \
|
2422 |
|
|
"Processing GO_COMMAND_READ." \
|
2423 |
|
|
" shifting in: 0x00000000000000000000000000169330ba20" \
|
2424 |
|
|
" shifted out: 0x0090e309ce5eefb6af600000000000000000" \
|
2425 |
|
|
" data: 00000000deadbeef" \
|
2426 |
|
|
" status: 0x4" \
|
2427 |
|
|
" time taken:" \
|
2428 |
|
|
"Execution step completed OK." \
|
2429 |
|
|
"Test completed successfully."] \
|
2430 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
2431 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "ffdffffc" "8" \
|
2432 |
|
|
"GO_COMMAND_READ" "8"
|
2433 |
|
|
|