1 |
98 |
jeremybenn |
# jtag-command.exp. Tests of the library JTAG WRITE_COMMAND
|
2 |
|
|
|
3 |
|
|
# Copyright (C) 2010 Embecosm Limited
|
4 |
|
|
|
5 |
|
|
# Contributor Jeremy Bennett
|
6 |
|
|
|
7 |
|
|
# This file is part of OpenRISC 1000 Architectural Simulator.
|
8 |
|
|
|
9 |
|
|
# This program is free software; you can redistribute it and/or modify it
|
10 |
|
|
# under the terms of the GNU General Public License as published by the Free
|
11 |
|
|
# Software Foundation; either version 3 of the License, or (at your option)
|
12 |
|
|
# any later version.
|
13 |
|
|
|
14 |
|
|
# This program is distributed in the hope that it will be useful, but WITHOUT
|
15 |
|
|
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
16 |
|
|
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
17 |
|
|
# more details.
|
18 |
|
|
|
19 |
|
|
# You should have received a copy of the GNU General Public License along
|
20 |
|
|
# with this program. If not, see . */
|
21 |
|
|
|
22 |
|
|
# -----------------------------------------------------------------------------
|
23 |
|
|
# This code is commented throughout for use with Doxygen.
|
24 |
|
|
# -----------------------------------------------------------------------------
|
25 |
|
|
|
26 |
|
|
|
27 |
|
|
# These are the tests of the high level JTAG WRITE_COMMAND interface.
|
28 |
|
|
|
29 |
|
|
# NOTE. All these tests return timing information, but we ignore it, since in
|
30 |
|
|
# general it will not be repeatable.
|
31 |
|
|
|
32 |
|
|
# Test of WRITE_COMMAND for each module (including none). This should raise an
|
33 |
|
|
# error for any module other than WB and CPU0. There are different errors for
|
34 |
|
|
# CPU1 (which can be selected, but for which WRITE_COMMAND is invalid) and all
|
35 |
|
|
# other modules.
|
36 |
|
|
|
37 |
|
|
# WRITE_COMMAND with no module selection
|
38 |
|
|
run_libsim "JTAG WRITE_COMMAND no module" \
|
39 |
|
|
[list "Initalization succeeded." \
|
40 |
|
|
"Execution step completed OK." \
|
41 |
|
|
"Resetting JTAG." \
|
42 |
|
|
"Execution step completed OK." \
|
43 |
|
|
"Shifting instruction." \
|
44 |
|
|
" shifting in: 0x01" \
|
45 |
|
|
" shifted out: 0x01" \
|
46 |
|
|
" time taken: " \
|
47 |
|
|
"Execution step completed OK." \
|
48 |
|
|
"Processing WRITE_COMMAND." \
|
49 |
|
|
" shifting in: 0x00000000018f4396f780000000100088" \
|
50 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
51 |
|
|
" status: 0x0" \
|
52 |
|
|
" time taken: " \
|
53 |
|
|
"Execution step completed OK." \
|
54 |
|
|
"Test completed successfully."] \
|
55 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
|
56 |
|
|
"SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4"
|
57 |
|
|
|
58 |
|
|
# WRITE_COMMAND for Wishbone
|
59 |
|
|
run_libsim "JTAG WRITE_COMMAND module WB" \
|
60 |
|
|
[list "Initalization succeeded." \
|
61 |
|
|
"Execution step completed OK." \
|
62 |
|
|
"Resetting JTAG." \
|
63 |
|
|
"Execution step completed OK." \
|
64 |
|
|
"Shifting instruction." \
|
65 |
|
|
" shifting in: 0x01" \
|
66 |
|
|
" shifted out: 0x01" \
|
67 |
|
|
" time taken: " \
|
68 |
|
|
"Execution step completed OK." \
|
69 |
|
|
"Selecting module." \
|
70 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
71 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
72 |
|
|
" status: 0x0" \
|
73 |
|
|
" time taken:" \
|
74 |
|
|
"Execution step completed OK." \
|
75 |
|
|
"Processing WRITE_COMMAND." \
|
76 |
|
|
" shifting in: 0x00000000018f4396f780000000100088" \
|
77 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
78 |
|
|
" status: 0x0" \
|
79 |
|
|
" time taken:" \
|
80 |
|
|
"Execution step completed OK." \
|
81 |
|
|
"Test completed successfully."] \
|
82 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
|
83 |
|
|
"SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4"
|
84 |
|
|
|
85 |
|
|
# WRITE_COMMAND for CPU0
|
86 |
|
|
run_libsim "JTAG WRITE_COMMAND module CPU0" \
|
87 |
|
|
[list "Initalization succeeded." \
|
88 |
|
|
"Execution step completed OK." \
|
89 |
|
|
"Resetting JTAG." \
|
90 |
|
|
"Execution step completed OK." \
|
91 |
|
|
"Shifting instruction." \
|
92 |
|
|
" shifting in: 0x01" \
|
93 |
|
|
" shifted out: 0x01" \
|
94 |
|
|
" time taken: " \
|
95 |
|
|
"Execution step completed OK." \
|
96 |
|
|
"Selecting module." \
|
97 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
98 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
99 |
|
|
" status: 0x0" \
|
100 |
|
|
" time taken:" \
|
101 |
|
|
"Execution step completed OK." \
|
102 |
|
|
"Processing WRITE_COMMAND." \
|
103 |
99 |
jeremybenn |
" shifting in: 0x0000000001933eb7e580010028000088" \
|
104 |
98 |
jeremybenn |
" shifted out: 0x164841bc600000000000000000000000" \
|
105 |
|
|
" status: 0x0" \
|
106 |
|
|
" time taken:" \
|
107 |
|
|
"Execution step completed OK." \
|
108 |
|
|
"Test completed successfully."] \
|
109 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
|
110 |
99 |
jeremybenn |
"SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4"
|
111 |
98 |
jeremybenn |
|
112 |
|
|
# WRITE_COMMAND for CPU1
|
113 |
|
|
run_libsim "JTAG WRITE_COMMAND module CPU1" \
|
114 |
|
|
[list "Initalization succeeded." \
|
115 |
|
|
"Execution step completed OK." \
|
116 |
|
|
"Resetting JTAG." \
|
117 |
|
|
"Execution step completed OK." \
|
118 |
|
|
"Shifting instruction." \
|
119 |
|
|
" shifting in: 0x01" \
|
120 |
|
|
" shifted out: 0x01" \
|
121 |
|
|
" time taken: " \
|
122 |
|
|
"Execution step completed OK." \
|
123 |
|
|
"Selecting module." \
|
124 |
|
|
" shifting in: 0x00000000001993c98e69" \
|
125 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
126 |
|
|
" status: 0x0" \
|
127 |
|
|
" time taken:" \
|
128 |
|
|
"Execution step completed OK." \
|
129 |
|
|
"Processing WRITE_COMMAND." \
|
130 |
|
|
" shifting in: 0x00000000018f4396f780000000100088" \
|
131 |
|
|
"ERROR: JTAG WRITE_COMMAND for CPU1 not supported." \
|
132 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
133 |
|
|
" status: 0x0" \
|
134 |
|
|
" time taken:" \
|
135 |
|
|
"Execution step completed OK." \
|
136 |
|
|
"Test completed successfully."] \
|
137 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
|
138 |
|
|
"SELECT_MODULE" "2" "WRITE_COMMAND" "2" "100000" "4"
|
139 |
|
|
|
140 |
|
|
# WRITE_COMMAND for invalid module
|
141 |
|
|
run_libsim "JTAG WRITE_COMMAND invalid module" \
|
142 |
|
|
[list "Initalization succeeded." \
|
143 |
|
|
"Execution step completed OK." \
|
144 |
|
|
"Resetting JTAG." \
|
145 |
|
|
"Execution step completed OK." \
|
146 |
|
|
"Shifting instruction." \
|
147 |
|
|
" shifting in: 0x01" \
|
148 |
|
|
" shifted out: 0x01" \
|
149 |
|
|
" time taken: " \
|
150 |
|
|
"Execution step completed OK." \
|
151 |
|
|
"Selecting module." \
|
152 |
|
|
" shifting in: 0x00000000000424d9ea79" \
|
153 |
|
|
" shifted out: 0x01893c98e68000000000" \
|
154 |
|
|
" status: 0x2" \
|
155 |
|
|
" time taken:" \
|
156 |
|
|
"Execution step completed OK." \
|
157 |
|
|
"Processing WRITE_COMMAND." \
|
158 |
|
|
" shifting in: 0x00000000018f4396f780000000100088" \
|
159 |
|
|
"ERROR: JTAG WRITE_COMMAND with no module selected." \
|
160 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
161 |
|
|
" status: 0x0" \
|
162 |
|
|
" time taken:" \
|
163 |
|
|
"Execution step completed OK." \
|
164 |
|
|
"Test completed successfully."] \
|
165 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
|
166 |
|
|
"SELECT_MODULE" "3" "WRITE_COMMAND" "2" "100000" "4"
|
167 |
|
|
|
168 |
|
|
# WRITE_COMMAND for valid followed by invalid module
|
169 |
|
|
run_libsim "JTAG WRITE_COMMAND valid then invalid module" \
|
170 |
|
|
[list "Initalization succeeded." \
|
171 |
|
|
"Execution step completed OK." \
|
172 |
|
|
"Resetting JTAG." \
|
173 |
|
|
"Execution step completed OK." \
|
174 |
|
|
"Shifting instruction." \
|
175 |
|
|
" shifting in: 0x01" \
|
176 |
|
|
" shifted out: 0x01" \
|
177 |
|
|
" time taken: " \
|
178 |
|
|
"Execution step completed OK." \
|
179 |
|
|
"Selecting module." \
|
180 |
|
|
" shifting in: 0x00000000001993c98e69" \
|
181 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
182 |
|
|
" status: 0x0" \
|
183 |
|
|
" time taken:" \
|
184 |
|
|
"Execution step completed OK." \
|
185 |
|
|
"Selecting module." \
|
186 |
|
|
" shifting in: 0x00000000000424d9ea79" \
|
187 |
|
|
" shifted out: 0x01893c98e68000000000" \
|
188 |
|
|
" status: 0x2" \
|
189 |
|
|
" time taken:" \
|
190 |
|
|
"Execution step completed OK." \
|
191 |
|
|
"Processing WRITE_COMMAND." \
|
192 |
|
|
" shifting in: 0x00000000018f4396f780000000100088" \
|
193 |
|
|
"ERROR: JTAG WRITE_COMMAND with no module selected." \
|
194 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
195 |
|
|
" status: 0x0" \
|
196 |
|
|
" time taken:" \
|
197 |
|
|
"Execution step completed OK." \
|
198 |
|
|
"Test completed successfully."] \
|
199 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
|
200 |
|
|
"SELECT_MODULE" "2" "SELECT_MODULE" "3" "WRITE_COMMAND" "2" \
|
201 |
|
|
"100000" "4"
|
202 |
|
|
|
203 |
|
|
# WRITE_COMMAND for invalid followed by valid module
|
204 |
|
|
run_libsim "JTAG WRITE_COMMAND invalid then valid module" \
|
205 |
|
|
[list "Initalization succeeded." \
|
206 |
|
|
"Execution step completed OK." \
|
207 |
|
|
"Resetting JTAG." \
|
208 |
|
|
"Execution step completed OK." \
|
209 |
|
|
"Shifting instruction." \
|
210 |
|
|
" shifting in: 0x01" \
|
211 |
|
|
" shifted out: 0x01" \
|
212 |
|
|
" time taken: " \
|
213 |
|
|
"Execution step completed OK." \
|
214 |
|
|
"Selecting module." \
|
215 |
|
|
" shifting in: 0x00000000000424d9ea79" \
|
216 |
|
|
" shifted out: 0x01893c98e68000000000" \
|
217 |
|
|
" status: 0x2" \
|
218 |
|
|
" time taken:" \
|
219 |
|
|
"Execution step completed OK." \
|
220 |
|
|
"Selecting module." \
|
221 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
222 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
223 |
|
|
" status: 0x0" \
|
224 |
|
|
" time taken:" \
|
225 |
|
|
"Execution step completed OK." \
|
226 |
|
|
"Processing WRITE_COMMAND." \
|
227 |
|
|
" shifting in: 0x00000000018f4396f780000000100088" \
|
228 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
229 |
|
|
" status: 0x0" \
|
230 |
|
|
" time taken:" \
|
231 |
|
|
"Execution step completed OK." \
|
232 |
|
|
"Test completed successfully."] \
|
233 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
|
234 |
|
|
"SELECT_MODULE" "3" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" \
|
235 |
|
|
"100000" "4"
|
236 |
|
|
|
237 |
|
|
# Tests of WRITE_COMMAND access types for WishBone. Check the different access
|
238 |
|
|
# types are accepted/rejected as expected (0, 1, 2, 4, 5 and 6 are OK).
|
239 |
|
|
|
240 |
|
|
# WRITE_COMMAND to write bytes for WishBone (access type 0)
|
241 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write bytes" \
|
242 |
|
|
[list "Initalization succeeded." \
|
243 |
|
|
"Execution step completed OK." \
|
244 |
|
|
"Resetting JTAG." \
|
245 |
|
|
"Execution step completed OK." \
|
246 |
|
|
"Shifting instruction." \
|
247 |
|
|
" shifting in: 0x01" \
|
248 |
|
|
" shifted out: 0x01" \
|
249 |
|
|
" time taken:" \
|
250 |
|
|
"Execution step completed OK." \
|
251 |
|
|
"Selecting module." \
|
252 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
253 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
254 |
|
|
" status: 0x0" \
|
255 |
|
|
" time taken:" \
|
256 |
|
|
"Execution step completed OK." \
|
257 |
|
|
"Processing WRITE_COMMAND." \
|
258 |
|
|
" shifting in: 0x000000000107557c0580000000100008" \
|
259 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
260 |
|
|
" status: 0x0" \
|
261 |
|
|
" time taken:" \
|
262 |
|
|
"Execution step completed OK." \
|
263 |
|
|
"Test completed successfully."] \
|
264 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
265 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "4"
|
266 |
|
|
|
267 |
|
|
# WRITE_COMMAND to write half words for WishBone (access type 1)
|
268 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write half words" \
|
269 |
|
|
[list "Initalization succeeded." \
|
270 |
|
|
"Execution step completed OK." \
|
271 |
|
|
"Resetting JTAG." \
|
272 |
|
|
"Execution step completed OK." \
|
273 |
|
|
"Shifting instruction." \
|
274 |
|
|
" shifting in: 0x01" \
|
275 |
|
|
" shifted out: 0x01" \
|
276 |
|
|
" time taken:" \
|
277 |
|
|
"Execution step completed OK." \
|
278 |
|
|
"Selecting module." \
|
279 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
280 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
281 |
|
|
" status: 0x0" \
|
282 |
|
|
" time taken:" \
|
283 |
|
|
"Execution step completed OK." \
|
284 |
|
|
"Processing WRITE_COMMAND." \
|
285 |
|
|
" shifting in: 0x00000000001778a9e180000000100108" \
|
286 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
287 |
|
|
" status: 0x0" \
|
288 |
|
|
" time taken:" \
|
289 |
|
|
"Execution step completed OK." \
|
290 |
|
|
"Test completed successfully."] \
|
291 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
292 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "4"
|
293 |
|
|
|
294 |
|
|
# WRITE_COMMAND to write words for WishBone (access type 2)
|
295 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write words" \
|
296 |
|
|
[list "Initalization succeeded." \
|
297 |
|
|
"Execution step completed OK." \
|
298 |
|
|
"Resetting JTAG." \
|
299 |
|
|
"Execution step completed OK." \
|
300 |
|
|
"Shifting instruction." \
|
301 |
|
|
" shifting in: 0x01" \
|
302 |
|
|
" shifted out: 0x01" \
|
303 |
|
|
" time taken:" \
|
304 |
|
|
"Execution step completed OK." \
|
305 |
|
|
"Selecting module." \
|
306 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
307 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
308 |
|
|
" status: 0x0" \
|
309 |
|
|
" time taken:" \
|
310 |
|
|
"Execution step completed OK." \
|
311 |
|
|
"Processing WRITE_COMMAND." \
|
312 |
|
|
" shifting in: 0x00000000018f4396f780000000100088" \
|
313 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
314 |
|
|
" status: 0x0" \
|
315 |
|
|
" time taken:" \
|
316 |
|
|
"Execution step completed OK." \
|
317 |
|
|
"Test completed successfully."] \
|
318 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
319 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4"
|
320 |
|
|
|
321 |
|
|
# WRITE_COMMAND to write access type 3 for WishBone. This should fail with an
|
322 |
|
|
# error.
|
323 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write access type 3" \
|
324 |
|
|
[list "Initalization succeeded." \
|
325 |
|
|
"Execution step completed OK." \
|
326 |
|
|
"Resetting JTAG." \
|
327 |
|
|
"Execution step completed OK." \
|
328 |
|
|
"Shifting instruction." \
|
329 |
|
|
" shifting in: 0x01" \
|
330 |
|
|
" shifted out: 0x01" \
|
331 |
|
|
" time taken:" \
|
332 |
|
|
"Execution step completed OK." \
|
333 |
|
|
"Selecting module." \
|
334 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
335 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
336 |
|
|
" status: 0x0" \
|
337 |
|
|
" time taken:" \
|
338 |
|
|
"Execution step completed OK." \
|
339 |
|
|
"Processing WRITE_COMMAND." \
|
340 |
|
|
" shifting in: 0x00000000009f6e431380000000100188" \
|
341 |
|
|
"ERROR: JTAG WRITE_COMMAND unknown access type 3." \
|
342 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
343 |
|
|
" status: 0x0" \
|
344 |
|
|
" time taken:" \
|
345 |
|
|
"Execution step completed OK." \
|
346 |
|
|
"Test completed successfully."] \
|
347 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
348 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "3" "100000" "4"
|
349 |
|
|
|
350 |
|
|
# WRITE_COMMAND to read bytes for WishBone (access type 4). All the read
|
351 |
|
|
# accesses use the init version of the loop, so consistent values are set.
|
352 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read bytes" \
|
353 |
|
|
[list "Initalization succeeded." \
|
354 |
|
|
"Execution step completed OK." \
|
355 |
|
|
"Resetting JTAG." \
|
356 |
|
|
"Execution step completed OK." \
|
357 |
|
|
"Shifting instruction." \
|
358 |
|
|
" shifting in: 0x01" \
|
359 |
|
|
" shifted out: 0x01" \
|
360 |
|
|
" time taken:" \
|
361 |
|
|
"Execution step completed OK." \
|
362 |
|
|
"Selecting module." \
|
363 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
364 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
365 |
|
|
" status: 0x0" \
|
366 |
|
|
" time taken:" \
|
367 |
|
|
"Execution step completed OK." \
|
368 |
|
|
"Processing WRITE_COMMAND." \
|
369 |
|
|
" shifting in: 0x0000000000982f0f3d80000000100048" \
|
370 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
371 |
|
|
" status: 0x0" \
|
372 |
|
|
" time taken:" \
|
373 |
|
|
"Execution step completed OK." \
|
374 |
|
|
"Test completed successfully."] \
|
375 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
376 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "4"
|
377 |
|
|
|
378 |
|
|
# WRITE_COMMAND to read half words for WishBone (access type 5)
|
379 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read half words" \
|
380 |
|
|
[list "Initalization succeeded." \
|
381 |
|
|
"Execution step completed OK." \
|
382 |
|
|
"Resetting JTAG." \
|
383 |
|
|
"Execution step completed OK." \
|
384 |
|
|
"Shifting instruction." \
|
385 |
|
|
" shifting in: 0x01" \
|
386 |
|
|
" shifted out: 0x01" \
|
387 |
|
|
" time taken:" \
|
388 |
|
|
"Execution step completed OK." \
|
389 |
|
|
"Selecting module." \
|
390 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
391 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
392 |
|
|
" status: 0x0" \
|
393 |
|
|
" time taken:" \
|
394 |
|
|
"Execution step completed OK." \
|
395 |
|
|
"Processing WRITE_COMMAND." \
|
396 |
|
|
" shifting in: 0x00000000018802dad980000000100148" \
|
397 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
398 |
|
|
" status: 0x0" \
|
399 |
|
|
" time taken:" \
|
400 |
|
|
"Execution step completed OK." \
|
401 |
|
|
"Test completed successfully."] \
|
402 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
403 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "4"
|
404 |
|
|
|
405 |
|
|
# WRITE_COMMAND to read words for WishBone (access type 6)
|
406 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read words" \
|
407 |
|
|
[list "Initalization succeeded." \
|
408 |
|
|
"Execution step completed OK." \
|
409 |
|
|
"Resetting JTAG." \
|
410 |
|
|
"Execution step completed OK." \
|
411 |
|
|
"Shifting instruction." \
|
412 |
|
|
" shifting in: 0x01" \
|
413 |
|
|
" shifted out: 0x01" \
|
414 |
|
|
" time taken:" \
|
415 |
|
|
"Execution step completed OK." \
|
416 |
|
|
"Selecting module." \
|
417 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
418 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
419 |
|
|
" status: 0x0" \
|
420 |
|
|
" time taken:" \
|
421 |
|
|
"Execution step completed OK." \
|
422 |
|
|
"Processing WRITE_COMMAND." \
|
423 |
|
|
" shifting in: 0x00000000001039e5cf800000001000c8" \
|
424 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
425 |
|
|
" status: 0x0" \
|
426 |
|
|
" time taken:" \
|
427 |
|
|
"Execution step completed OK." \
|
428 |
|
|
"Test completed successfully."] \
|
429 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
430 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "4"
|
431 |
|
|
|
432 |
|
|
# WRITE_COMMAND to read access type 7 for WishBone. This should fail with an
|
433 |
|
|
# error.
|
434 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read access type 7" \
|
435 |
|
|
[list "Initalization succeeded." \
|
436 |
|
|
"Execution step completed OK." \
|
437 |
|
|
"Resetting JTAG." \
|
438 |
|
|
"Execution step completed OK." \
|
439 |
|
|
"Shifting instruction." \
|
440 |
|
|
" shifting in: 0x01" \
|
441 |
|
|
" shifted out: 0x01" \
|
442 |
|
|
" time taken:" \
|
443 |
|
|
"Execution step completed OK." \
|
444 |
|
|
"Selecting module." \
|
445 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
446 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
447 |
|
|
" status: 0x0" \
|
448 |
|
|
" time taken:" \
|
449 |
|
|
"Execution step completed OK." \
|
450 |
|
|
"Processing WRITE_COMMAND." \
|
451 |
|
|
" shifting in: 0x00000000010014302b800000001001c8" \
|
452 |
|
|
"ERROR: JTAG WRITE_COMMAND unknown access type 7." \
|
453 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
454 |
|
|
" status: 0x0" \
|
455 |
|
|
" time taken:" \
|
456 |
|
|
"Execution step completed OK." \
|
457 |
|
|
"Test completed successfully."] \
|
458 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
459 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "7" "100000" "4"
|
460 |
|
|
|
461 |
|
|
# Tests of WRITE_COMMAND addresses for WishBone. Check different addresses are
|
462 |
|
|
# all accepted. For all of these we use the simple loop and a byte write. Test
|
463 |
|
|
# the boundaries (address 0 and address 0xffffffff).
|
464 |
|
|
|
465 |
|
|
# WRITE_COMMAND for WishBone to address 0
|
466 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write address 0" \
|
467 |
|
|
[list "Initalization succeeded." \
|
468 |
|
|
"Execution step completed OK." \
|
469 |
|
|
"Resetting JTAG." \
|
470 |
|
|
"Execution step completed OK." \
|
471 |
|
|
"Shifting instruction." \
|
472 |
|
|
" shifting in: 0x01" \
|
473 |
|
|
" shifted out: 0x01" \
|
474 |
|
|
" time taken:" \
|
475 |
|
|
"Execution step completed OK." \
|
476 |
|
|
"Selecting module." \
|
477 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
478 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
479 |
|
|
" status: 0x0" \
|
480 |
|
|
" time taken:" \
|
481 |
|
|
"Execution step completed OK." \
|
482 |
|
|
"Processing WRITE_COMMAND." \
|
483 |
|
|
" shifting in: 0x0000000000517c6ee600000000000008" \
|
484 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
485 |
|
|
" status: 0x0" \
|
486 |
|
|
" time taken:" \
|
487 |
|
|
"Execution step completed OK." \
|
488 |
|
|
"Test completed successfully."] \
|
489 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
490 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "0" "1"
|
491 |
|
|
|
492 |
|
|
# WRITE_COMMAND for WishBone to address ffffffff
|
493 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write address 0xffffffff" \
|
494 |
|
|
[list "Initalization succeeded." \
|
495 |
|
|
"Execution step completed OK." \
|
496 |
|
|
"Resetting JTAG." \
|
497 |
|
|
"Execution step completed OK." \
|
498 |
|
|
"Shifting instruction." \
|
499 |
|
|
" shifting in: 0x01" \
|
500 |
|
|
" shifted out: 0x01" \
|
501 |
|
|
" time taken:" \
|
502 |
|
|
"Execution step completed OK." \
|
503 |
|
|
"Selecting module." \
|
504 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
505 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
506 |
|
|
" status: 0x0" \
|
507 |
|
|
" time taken:" \
|
508 |
|
|
"Execution step completed OK." \
|
509 |
|
|
"Processing WRITE_COMMAND." \
|
510 |
|
|
" shifting in: 0x0000000000cd06d25e0001fffffffe08" \
|
511 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
512 |
|
|
" status: 0x0" \
|
513 |
|
|
" time taken:" \
|
514 |
|
|
"Execution step completed OK." \
|
515 |
|
|
"Test completed successfully."] \
|
516 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
517 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "ffffffff" "1"
|
518 |
|
|
|
519 |
|
|
# Tests of WRITE_COMMAND lengths for WishBone. Check the different lengths are
|
520 |
|
|
# accepted. For all of these we use the simple loop and write. There is no
|
521 |
|
|
# point testing sizes outside the range, since these fail in the test rather
|
522 |
|
|
# than the progrma under test. We use byte reads from the initialized loop
|
523 |
|
|
|
524 |
|
|
# Test of WRITE_COMMAND for WishBone 1 byte.
|
525 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read length 1" \
|
526 |
|
|
[list "Initalization succeeded." \
|
527 |
|
|
"Execution step completed OK." \
|
528 |
|
|
"Resetting JTAG." \
|
529 |
|
|
"Execution step completed OK." \
|
530 |
|
|
"Shifting instruction." \
|
531 |
|
|
" shifting in: 0x01" \
|
532 |
|
|
" shifted out: 0x01" \
|
533 |
|
|
" time taken:" \
|
534 |
|
|
"Execution step completed OK." \
|
535 |
|
|
"Selecting module." \
|
536 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
537 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
538 |
|
|
" status: 0x0" \
|
539 |
|
|
" time taken:" \
|
540 |
|
|
"Execution step completed OK." \
|
541 |
|
|
"Processing WRITE_COMMAND." \
|
542 |
|
|
" shifting in: 0x0000000001aee68a5c00000000100048" \
|
543 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
544 |
|
|
" status: 0x0" \
|
545 |
|
|
" time taken:" \
|
546 |
|
|
"Execution step completed OK." \
|
547 |
|
|
"Test completed successfully."] \
|
548 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
549 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "1"
|
550 |
|
|
|
551 |
|
|
# Test of WRITE_COMMAND for WishBone 0x10000 bytes. We only match the first
|
552 |
|
|
# few bytes of the shifted strings and data.
|
553 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read length 0x10000" \
|
554 |
|
|
[list "Initalization succeeded." \
|
555 |
|
|
"Execution step completed OK." \
|
556 |
|
|
"Resetting JTAG." \
|
557 |
|
|
"Execution step completed OK." \
|
558 |
|
|
"Shifting instruction." \
|
559 |
|
|
" shifting in: 0x01" \
|
560 |
|
|
" shifted out: 0x01" \
|
561 |
|
|
" time taken:" \
|
562 |
|
|
"Execution step completed OK." \
|
563 |
|
|
"Selecting module." \
|
564 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
565 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
566 |
|
|
" status: 0x0" \
|
567 |
|
|
" time taken:" \
|
568 |
|
|
"Execution step completed OK." \
|
569 |
|
|
"Processing WRITE_COMMAND." \
|
570 |
|
|
" shifting in: 0x0000000000d2aaafa3fffe0000100048" \
|
571 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
572 |
|
|
" status: 0x0" \
|
573 |
|
|
" time taken:" \
|
574 |
|
|
"Execution step completed OK." \
|
575 |
|
|
"Test completed successfully."] \
|
576 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
577 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "10000"
|
578 |
|
|
|
579 |
|
|
# Tests of WRITE_COMMAND with different alignments. Byte access should be
|
580 |
|
|
# aligned on any boundary. Half-word on half-word boundaries and word on word
|
581 |
|
|
# boundaries. In each case we use 4 byte transfers.
|
582 |
|
|
|
583 |
|
|
# Write bytes, aligned on byte 0
|
584 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write bytes, byte 0 aligned" \
|
585 |
|
|
[list "Initalization succeeded." \
|
586 |
|
|
"Execution step completed OK." \
|
587 |
|
|
"Resetting JTAG." \
|
588 |
|
|
"Execution step completed OK." \
|
589 |
|
|
"Shifting instruction." \
|
590 |
|
|
" shifting in: 0x01" \
|
591 |
|
|
" shifted out: 0x01" \
|
592 |
|
|
" time taken:" \
|
593 |
|
|
"Execution step completed OK." \
|
594 |
|
|
"Selecting module." \
|
595 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
596 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
597 |
|
|
" status: 0x0" \
|
598 |
|
|
" time taken:" \
|
599 |
|
|
"Execution step completed OK." \
|
600 |
|
|
"Processing WRITE_COMMAND." \
|
601 |
|
|
" shifting in: 0x000000000107557c0580000000100008" \
|
602 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
603 |
|
|
" status: 0x0" \
|
604 |
|
|
" time taken:" \
|
605 |
|
|
"Execution step completed OK." \
|
606 |
|
|
"Test completed successfully."] \
|
607 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
608 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "4"
|
609 |
|
|
|
610 |
|
|
# Write bytes, aligned on byte 1
|
611 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write bytes, byte 1 aligned" \
|
612 |
|
|
[list "Initalization succeeded." \
|
613 |
|
|
"Execution step completed OK." \
|
614 |
|
|
"Resetting JTAG." \
|
615 |
|
|
"Execution step completed OK." \
|
616 |
|
|
"Shifting instruction." \
|
617 |
|
|
" shifting in: 0x01" \
|
618 |
|
|
" shifted out: 0x01" \
|
619 |
|
|
" time taken:" \
|
620 |
|
|
"Execution step completed OK." \
|
621 |
|
|
"Selecting module." \
|
622 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
623 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
624 |
|
|
" status: 0x0" \
|
625 |
|
|
" time taken:" \
|
626 |
|
|
"Execution step completed OK." \
|
627 |
|
|
"Processing WRITE_COMMAND." \
|
628 |
|
|
" shifting in: 0x0000000000c53f4b0580010000100008" \
|
629 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
630 |
|
|
" status: 0x0" \
|
631 |
|
|
" time taken:" \
|
632 |
|
|
"Execution step completed OK." \
|
633 |
|
|
"Test completed successfully."] \
|
634 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
635 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100001" "4"
|
636 |
|
|
|
637 |
|
|
# Write bytes, aligned on byte 2
|
638 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write bytes, byte 2 aligned" \
|
639 |
|
|
[list "Initalization succeeded." \
|
640 |
|
|
"Execution step completed OK." \
|
641 |
|
|
"Resetting JTAG." \
|
642 |
|
|
"Execution step completed OK." \
|
643 |
|
|
"Shifting instruction." \
|
644 |
|
|
" shifting in: 0x01" \
|
645 |
|
|
" shifted out: 0x01" \
|
646 |
|
|
" time taken:" \
|
647 |
|
|
"Execution step completed OK." \
|
648 |
|
|
"Selecting module." \
|
649 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
650 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
651 |
|
|
" status: 0x0" \
|
652 |
|
|
" time taken:" \
|
653 |
|
|
"Execution step completed OK." \
|
654 |
|
|
"Processing WRITE_COMMAND." \
|
655 |
|
|
" shifting in: 0x0000000001e660678580008000100008" \
|
656 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
657 |
|
|
" status: 0x0" \
|
658 |
|
|
" time taken:" \
|
659 |
|
|
"Execution step completed OK." \
|
660 |
|
|
"Test completed successfully."] \
|
661 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
662 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100002" "4"
|
663 |
|
|
|
664 |
|
|
# Write bytes, aligned on byte 3
|
665 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write bytes, byte 3 aligned" \
|
666 |
|
|
[list "Initalization succeeded." \
|
667 |
|
|
"Execution step completed OK." \
|
668 |
|
|
"Resetting JTAG." \
|
669 |
|
|
"Execution step completed OK." \
|
670 |
|
|
"Shifting instruction." \
|
671 |
|
|
" shifting in: 0x01" \
|
672 |
|
|
" shifted out: 0x01" \
|
673 |
|
|
" time taken:" \
|
674 |
|
|
"Execution step completed OK." \
|
675 |
|
|
"Selecting module." \
|
676 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
677 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
678 |
|
|
" status: 0x0" \
|
679 |
|
|
" time taken:" \
|
680 |
|
|
"Execution step completed OK." \
|
681 |
|
|
"Processing WRITE_COMMAND." \
|
682 |
|
|
" shifting in: 0x0000000000240a508580018000100008" \
|
683 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
684 |
|
|
" status: 0x0" \
|
685 |
|
|
" time taken:" \
|
686 |
|
|
"Execution step completed OK." \
|
687 |
|
|
"Test completed successfully."] \
|
688 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
689 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100003" "4"
|
690 |
|
|
|
691 |
|
|
# Write half words, aligned on byte 0
|
692 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write half words, byte 0 aligned" \
|
693 |
|
|
[list "Initalization succeeded." \
|
694 |
|
|
"Execution step completed OK." \
|
695 |
|
|
"Resetting JTAG." \
|
696 |
|
|
"Execution step completed OK." \
|
697 |
|
|
"Shifting instruction." \
|
698 |
|
|
" shifting in: 0x01" \
|
699 |
|
|
" shifted out: 0x01" \
|
700 |
|
|
" time taken:" \
|
701 |
|
|
"Execution step completed OK." \
|
702 |
|
|
"Selecting module." \
|
703 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
704 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
705 |
|
|
" status: 0x0" \
|
706 |
|
|
" time taken:" \
|
707 |
|
|
"Execution step completed OK." \
|
708 |
|
|
"Processing WRITE_COMMAND." \
|
709 |
|
|
" shifting in: 0x00000000001778a9e180000000100108" \
|
710 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
711 |
|
|
" status: 0x0" \
|
712 |
|
|
" time taken:" \
|
713 |
|
|
"Execution step completed OK." \
|
714 |
|
|
"Test completed successfully."] \
|
715 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
716 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "4"
|
717 |
|
|
|
718 |
|
|
# Write half words, aligned on byte 1
|
719 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write half words, byte 1 aligned" \
|
720 |
|
|
[list "Initalization succeeded." \
|
721 |
|
|
"Execution step completed OK." \
|
722 |
|
|
"Resetting JTAG." \
|
723 |
|
|
"Execution step completed OK." \
|
724 |
|
|
"Shifting instruction." \
|
725 |
|
|
" shifting in: 0x01" \
|
726 |
|
|
" shifted out: 0x01" \
|
727 |
|
|
" time taken:" \
|
728 |
|
|
"Execution step completed OK." \
|
729 |
|
|
"Selecting module." \
|
730 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
731 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
732 |
|
|
" status: 0x0" \
|
733 |
|
|
" time taken:" \
|
734 |
|
|
"Execution step completed OK." \
|
735 |
|
|
"Processing WRITE_COMMAND." \
|
736 |
|
|
" shifting in: 0x0000000001d5129ee180010000100108" \
|
737 |
|
|
"ERROR: JTAG WishBone 16-bit access must be 2-byte aligned." \
|
738 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
739 |
|
|
" status: 0x0" \
|
740 |
|
|
" time taken:" \
|
741 |
|
|
"Execution step completed OK." \
|
742 |
|
|
"Test completed successfully."] \
|
743 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
744 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100001" "4"
|
745 |
|
|
|
746 |
|
|
# Write half words, aligned on byte 2
|
747 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write half words, byte 2 aligned" \
|
748 |
|
|
[list "Initalization succeeded." \
|
749 |
|
|
"Execution step completed OK." \
|
750 |
|
|
"Resetting JTAG." \
|
751 |
|
|
"Execution step completed OK." \
|
752 |
|
|
"Shifting instruction." \
|
753 |
|
|
" shifting in: 0x01" \
|
754 |
|
|
" shifted out: 0x01" \
|
755 |
|
|
" time taken:" \
|
756 |
|
|
"Execution step completed OK." \
|
757 |
|
|
"Selecting module." \
|
758 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
759 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
760 |
|
|
" status: 0x0" \
|
761 |
|
|
" time taken:" \
|
762 |
|
|
"Execution step completed OK." \
|
763 |
|
|
"Processing WRITE_COMMAND." \
|
764 |
|
|
" shifting in: 0x0000000000f64db26180008000100108" \
|
765 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
766 |
|
|
" status: 0x0" \
|
767 |
|
|
" time taken:" \
|
768 |
|
|
"Execution step completed OK." \
|
769 |
|
|
"Test completed successfully."] \
|
770 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
771 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100002" "4"
|
772 |
|
|
|
773 |
|
|
# Write half words, aligned on byte 3
|
774 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write half words, byte 3 aligned" \
|
775 |
|
|
[list "Initalization succeeded." \
|
776 |
|
|
"Execution step completed OK." \
|
777 |
|
|
"Resetting JTAG." \
|
778 |
|
|
"Execution step completed OK." \
|
779 |
|
|
"Shifting instruction." \
|
780 |
|
|
" shifting in: 0x01" \
|
781 |
|
|
" shifted out: 0x01" \
|
782 |
|
|
" time taken:" \
|
783 |
|
|
"Execution step completed OK." \
|
784 |
|
|
"Selecting module." \
|
785 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
786 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
787 |
|
|
" status: 0x0" \
|
788 |
|
|
" time taken:" \
|
789 |
|
|
"Execution step completed OK." \
|
790 |
|
|
"Processing WRITE_COMMAND." \
|
791 |
|
|
" shifting in: 0x00000000013427856180018000100108" \
|
792 |
|
|
"ERROR: JTAG WishBone 16-bit access must be 2-byte aligned." \
|
793 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
794 |
|
|
" status: 0x0" \
|
795 |
|
|
" time taken:" \
|
796 |
|
|
"Execution step completed OK." \
|
797 |
|
|
"Test completed successfully."] \
|
798 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
799 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100003" "4"
|
800 |
|
|
|
801 |
|
|
# Write words, aligned on byte 0
|
802 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write words, byte 0 aligned" \
|
803 |
|
|
[list "Initalization succeeded." \
|
804 |
|
|
"Execution step completed OK." \
|
805 |
|
|
"Resetting JTAG." \
|
806 |
|
|
"Execution step completed OK." \
|
807 |
|
|
"Shifting instruction." \
|
808 |
|
|
" shifting in: 0x01" \
|
809 |
|
|
" shifted out: 0x01" \
|
810 |
|
|
" time taken:" \
|
811 |
|
|
"Execution step completed OK." \
|
812 |
|
|
"Selecting module." \
|
813 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
814 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
815 |
|
|
" status: 0x0" \
|
816 |
|
|
" time taken:" \
|
817 |
|
|
"Execution step completed OK." \
|
818 |
|
|
"Processing WRITE_COMMAND." \
|
819 |
|
|
" shifting in: 0x00000000018f4396f780000000100088" \
|
820 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
821 |
|
|
" status: 0x0" \
|
822 |
|
|
" time taken:" \
|
823 |
|
|
"Execution step completed OK." \
|
824 |
|
|
"Test completed successfully."] \
|
825 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
826 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4"
|
827 |
|
|
|
828 |
|
|
# Write words, aligned on byte 1
|
829 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write words, byte 1 aligned" \
|
830 |
|
|
[list "Initalization succeeded." \
|
831 |
|
|
"Execution step completed OK." \
|
832 |
|
|
"Resetting JTAG." \
|
833 |
|
|
"Execution step completed OK." \
|
834 |
|
|
"Shifting instruction." \
|
835 |
|
|
" shifting in: 0x01" \
|
836 |
|
|
" shifted out: 0x01" \
|
837 |
|
|
" time taken:" \
|
838 |
|
|
"Execution step completed OK." \
|
839 |
|
|
"Selecting module." \
|
840 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
841 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
842 |
|
|
" status: 0x0" \
|
843 |
|
|
" time taken:" \
|
844 |
|
|
"Execution step completed OK." \
|
845 |
|
|
"Processing WRITE_COMMAND." \
|
846 |
|
|
" shifting in: 0x00000000004d29a1f780010000100088" \
|
847 |
|
|
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
|
848 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
849 |
|
|
" status: 0x0" \
|
850 |
|
|
" time taken:" \
|
851 |
|
|
"Execution step completed OK." \
|
852 |
|
|
"Test completed successfully."] \
|
853 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
854 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100001" "4"
|
855 |
|
|
|
856 |
|
|
# Write words, aligned on byte 2
|
857 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write words, byte 2 aligned" \
|
858 |
|
|
[list "Initalization succeeded." \
|
859 |
|
|
"Execution step completed OK." \
|
860 |
|
|
"Resetting JTAG." \
|
861 |
|
|
"Execution step completed OK." \
|
862 |
|
|
"Shifting instruction." \
|
863 |
|
|
" shifting in: 0x01" \
|
864 |
|
|
" shifted out: 0x01" \
|
865 |
|
|
" time taken:" \
|
866 |
|
|
"Execution step completed OK." \
|
867 |
|
|
"Selecting module." \
|
868 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
869 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
870 |
|
|
" status: 0x0" \
|
871 |
|
|
" time taken:" \
|
872 |
|
|
"Execution step completed OK." \
|
873 |
|
|
"Processing WRITE_COMMAND." \
|
874 |
|
|
" shifting in: 0x00000000016e768d7780008000100088" \
|
875 |
|
|
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
|
876 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
877 |
|
|
" status: 0x0" \
|
878 |
|
|
" time taken:" \
|
879 |
|
|
"Execution step completed OK." \
|
880 |
|
|
"Test completed successfully."] \
|
881 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
882 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100002" "4"
|
883 |
|
|
|
884 |
|
|
# Write words, aligned on byte 3
|
885 |
|
|
run_libsim "JTAG WRITE_COMMAND WB write words, byte 3 aligned" \
|
886 |
|
|
[list "Initalization succeeded." \
|
887 |
|
|
"Execution step completed OK." \
|
888 |
|
|
"Resetting JTAG." \
|
889 |
|
|
"Execution step completed OK." \
|
890 |
|
|
"Shifting instruction." \
|
891 |
|
|
" shifting in: 0x01" \
|
892 |
|
|
" shifted out: 0x01" \
|
893 |
|
|
" time taken:" \
|
894 |
|
|
"Execution step completed OK." \
|
895 |
|
|
"Selecting module." \
|
896 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
897 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
898 |
|
|
" status: 0x0" \
|
899 |
|
|
" time taken:" \
|
900 |
|
|
"Execution step completed OK." \
|
901 |
|
|
"Processing WRITE_COMMAND." \
|
902 |
|
|
" shifting in: 0x0000000000ac1cba7780018000100088" \
|
903 |
|
|
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
|
904 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
905 |
|
|
" status: 0x0" \
|
906 |
|
|
" time taken:" \
|
907 |
|
|
"Execution step completed OK." \
|
908 |
|
|
"Test completed successfully."] \
|
909 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
910 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100003" "4"
|
911 |
|
|
|
912 |
|
|
# Read bytes, aligned on byte 0
|
913 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read bytes, byte 0 aligned" \
|
914 |
|
|
[list "Initalization succeeded." \
|
915 |
|
|
"Execution step completed OK." \
|
916 |
|
|
"Resetting JTAG." \
|
917 |
|
|
"Execution step completed OK." \
|
918 |
|
|
"Shifting instruction." \
|
919 |
|
|
" shifting in: 0x01" \
|
920 |
|
|
" shifted out: 0x01" \
|
921 |
|
|
" time taken:" \
|
922 |
|
|
"Execution step completed OK." \
|
923 |
|
|
"Selecting module." \
|
924 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
925 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
926 |
|
|
" status: 0x0" \
|
927 |
|
|
" time taken:" \
|
928 |
|
|
"Execution step completed OK." \
|
929 |
|
|
"Processing WRITE_COMMAND." \
|
930 |
|
|
" shifting in: 0x0000000000982f0f3d80000000100048" \
|
931 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
932 |
|
|
" status: 0x0" \
|
933 |
|
|
" time taken:" \
|
934 |
|
|
"Execution step completed OK." \
|
935 |
|
|
"Test completed successfully."] \
|
936 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
937 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "4"
|
938 |
|
|
|
939 |
|
|
# Read bytes, aligned on byte 1
|
940 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read bytes, byte 1 aligned" \
|
941 |
|
|
[list "Initalization succeeded." \
|
942 |
|
|
"Execution step completed OK." \
|
943 |
|
|
"Resetting JTAG." \
|
944 |
|
|
"Execution step completed OK." \
|
945 |
|
|
"Shifting instruction." \
|
946 |
|
|
" shifting in: 0x01" \
|
947 |
|
|
" shifted out: 0x01" \
|
948 |
|
|
" time taken:" \
|
949 |
|
|
"Execution step completed OK." \
|
950 |
|
|
"Selecting module." \
|
951 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
952 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
953 |
|
|
" status: 0x0" \
|
954 |
|
|
" time taken:" \
|
955 |
|
|
"Execution step completed OK." \
|
956 |
|
|
"Processing WRITE_COMMAND." \
|
957 |
|
|
" shifting in: 0x00000000015a45383d80010000100048" \
|
958 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
959 |
|
|
" status: 0x0" \
|
960 |
|
|
" time taken:" \
|
961 |
|
|
"Execution step completed OK." \
|
962 |
|
|
"Test completed successfully."] \
|
963 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
964 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100001" "4"
|
965 |
|
|
|
966 |
|
|
# Read bytes, aligned on byte 2
|
967 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read bytes, byte 2 aligned" \
|
968 |
|
|
[list "Initalization succeeded." \
|
969 |
|
|
"Execution step completed OK." \
|
970 |
|
|
"Resetting JTAG." \
|
971 |
|
|
"Execution step completed OK." \
|
972 |
|
|
"Shifting instruction." \
|
973 |
|
|
" shifting in: 0x01" \
|
974 |
|
|
" shifted out: 0x01" \
|
975 |
|
|
" time taken:" \
|
976 |
|
|
"Execution step completed OK." \
|
977 |
|
|
"Selecting module." \
|
978 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
979 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
980 |
|
|
" status: 0x0" \
|
981 |
|
|
" time taken:" \
|
982 |
|
|
"Execution step completed OK." \
|
983 |
|
|
"Processing WRITE_COMMAND." \
|
984 |
|
|
" shifting in: 0x0000000000791a14bd80008000100048" \
|
985 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
986 |
|
|
" status: 0x0" \
|
987 |
|
|
" time taken:" \
|
988 |
|
|
"Execution step completed OK." \
|
989 |
|
|
"Test completed successfully."] \
|
990 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
991 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100002" "4"
|
992 |
|
|
|
993 |
|
|
# Read bytes, aligned on byte 3
|
994 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read bytes, byte 3 aligned" \
|
995 |
|
|
[list "Initalization succeeded." \
|
996 |
|
|
"Execution step completed OK." \
|
997 |
|
|
"Resetting JTAG." \
|
998 |
|
|
"Execution step completed OK." \
|
999 |
|
|
"Shifting instruction." \
|
1000 |
|
|
" shifting in: 0x01" \
|
1001 |
|
|
" shifted out: 0x01" \
|
1002 |
|
|
" time taken:" \
|
1003 |
|
|
"Execution step completed OK." \
|
1004 |
|
|
"Selecting module." \
|
1005 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1006 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1007 |
|
|
" status: 0x0" \
|
1008 |
|
|
" time taken:" \
|
1009 |
|
|
"Execution step completed OK." \
|
1010 |
|
|
"Processing WRITE_COMMAND." \
|
1011 |
|
|
" shifting in: 0x0000000001bb7023bd80018000100048" \
|
1012 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1013 |
|
|
" status: 0x0" \
|
1014 |
|
|
" time taken:" \
|
1015 |
|
|
"Execution step completed OK." \
|
1016 |
|
|
"Test completed successfully."] \
|
1017 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1018 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100003" "4"
|
1019 |
|
|
|
1020 |
|
|
# Read half words, aligned on byte 0
|
1021 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read half words, byte 0 aligned" \
|
1022 |
|
|
[list "Initalization succeeded." \
|
1023 |
|
|
"Execution step completed OK." \
|
1024 |
|
|
"Resetting JTAG." \
|
1025 |
|
|
"Execution step completed OK." \
|
1026 |
|
|
"Shifting instruction." \
|
1027 |
|
|
" shifting in: 0x01" \
|
1028 |
|
|
" shifted out: 0x01" \
|
1029 |
|
|
" time taken:" \
|
1030 |
|
|
"Execution step completed OK." \
|
1031 |
|
|
"Selecting module." \
|
1032 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1033 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1034 |
|
|
" status: 0x0" \
|
1035 |
|
|
" time taken:" \
|
1036 |
|
|
"Execution step completed OK." \
|
1037 |
|
|
"Processing WRITE_COMMAND." \
|
1038 |
|
|
" shifting in: 0x00000000018802dad980000000100148" \
|
1039 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1040 |
|
|
" status: 0x0" \
|
1041 |
|
|
" time taken:" \
|
1042 |
|
|
"Execution step completed OK." \
|
1043 |
|
|
"Test completed successfully."] \
|
1044 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1045 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "4"
|
1046 |
|
|
|
1047 |
|
|
# Read half words, aligned on byte 1
|
1048 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read half words, byte 1 aligned" \
|
1049 |
|
|
[list "Initalization succeeded." \
|
1050 |
|
|
"Execution step completed OK." \
|
1051 |
|
|
"Resetting JTAG." \
|
1052 |
|
|
"Execution step completed OK." \
|
1053 |
|
|
"Shifting instruction." \
|
1054 |
|
|
" shifting in: 0x01" \
|
1055 |
|
|
" shifted out: 0x01" \
|
1056 |
|
|
" time taken:" \
|
1057 |
|
|
"Execution step completed OK." \
|
1058 |
|
|
"Selecting module." \
|
1059 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1060 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1061 |
|
|
" status: 0x0" \
|
1062 |
|
|
" time taken:" \
|
1063 |
|
|
"Execution step completed OK." \
|
1064 |
|
|
"Processing WRITE_COMMAND." \
|
1065 |
|
|
" shifting in: 0x00000000004a68edd980010000100148" \
|
1066 |
|
|
"ERROR: JTAG WishBone 16-bit access must be 2-byte aligned." \
|
1067 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1068 |
|
|
" status: 0x0" \
|
1069 |
|
|
" time taken:" \
|
1070 |
|
|
"Execution step completed OK." \
|
1071 |
|
|
"Test completed successfully."] \
|
1072 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1073 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100001" "4"
|
1074 |
|
|
|
1075 |
|
|
# Read half words, aligned on byte 2
|
1076 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read half words, byte 2 aligned" \
|
1077 |
|
|
[list "Initalization succeeded." \
|
1078 |
|
|
"Execution step completed OK." \
|
1079 |
|
|
"Resetting JTAG." \
|
1080 |
|
|
"Execution step completed OK." \
|
1081 |
|
|
"Shifting instruction." \
|
1082 |
|
|
" shifting in: 0x01" \
|
1083 |
|
|
" shifted out: 0x01" \
|
1084 |
|
|
" time taken:" \
|
1085 |
|
|
"Execution step completed OK." \
|
1086 |
|
|
"Selecting module." \
|
1087 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1088 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1089 |
|
|
" status: 0x0" \
|
1090 |
|
|
" time taken:" \
|
1091 |
|
|
"Execution step completed OK." \
|
1092 |
|
|
"Processing WRITE_COMMAND." \
|
1093 |
|
|
" shifting in: 0x00000000016937c15980008000100148" \
|
1094 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1095 |
|
|
" status: 0x0" \
|
1096 |
|
|
" time taken:" \
|
1097 |
|
|
"Execution step completed OK." \
|
1098 |
|
|
"Test completed successfully."] \
|
1099 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1100 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100002" "4"
|
1101 |
|
|
|
1102 |
|
|
# Read half words, aligned on byte 3
|
1103 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read half words, byte 3 aligned" \
|
1104 |
|
|
[list "Initalization succeeded." \
|
1105 |
|
|
"Execution step completed OK." \
|
1106 |
|
|
"Resetting JTAG." \
|
1107 |
|
|
"Execution step completed OK." \
|
1108 |
|
|
"Shifting instruction." \
|
1109 |
|
|
" shifting in: 0x01" \
|
1110 |
|
|
" shifted out: 0x01" \
|
1111 |
|
|
" time taken:" \
|
1112 |
|
|
"Execution step completed OK." \
|
1113 |
|
|
"Selecting module." \
|
1114 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1115 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1116 |
|
|
" status: 0x0" \
|
1117 |
|
|
" time taken:" \
|
1118 |
|
|
"Execution step completed OK." \
|
1119 |
|
|
"Processing WRITE_COMMAND." \
|
1120 |
|
|
" shifting in: 0x0000000000ab5df65980018000100148" \
|
1121 |
|
|
"ERROR: JTAG WishBone 16-bit access must be 2-byte aligned." \
|
1122 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1123 |
|
|
" status: 0x0" \
|
1124 |
|
|
" time taken:" \
|
1125 |
|
|
"Execution step completed OK." \
|
1126 |
|
|
"Test completed successfully."] \
|
1127 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1128 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100003" "4"
|
1129 |
|
|
|
1130 |
|
|
# Read words, aligned on byte 0
|
1131 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read words, byte 0 aligned" \
|
1132 |
|
|
[list "Initalization succeeded." \
|
1133 |
|
|
"Execution step completed OK." \
|
1134 |
|
|
"Resetting JTAG." \
|
1135 |
|
|
"Execution step completed OK." \
|
1136 |
|
|
"Shifting instruction." \
|
1137 |
|
|
" shifting in: 0x01" \
|
1138 |
|
|
" shifted out: 0x01" \
|
1139 |
|
|
" time taken:" \
|
1140 |
|
|
"Execution step completed OK." \
|
1141 |
|
|
"Selecting module." \
|
1142 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1143 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1144 |
|
|
" status: 0x0" \
|
1145 |
|
|
" time taken:" \
|
1146 |
|
|
"Execution step completed OK." \
|
1147 |
|
|
"Processing WRITE_COMMAND." \
|
1148 |
|
|
" shifting in: 0x00000000001039e5cf800000001000c8" \
|
1149 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1150 |
|
|
" status: 0x0" \
|
1151 |
|
|
" time taken:" \
|
1152 |
|
|
"Execution step completed OK." \
|
1153 |
|
|
"Test completed successfully."] \
|
1154 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1155 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "4"
|
1156 |
|
|
|
1157 |
|
|
# Read words, aligned on byte 1
|
1158 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read words, byte 1 aligned" \
|
1159 |
|
|
[list "Initalization succeeded." \
|
1160 |
|
|
"Execution step completed OK." \
|
1161 |
|
|
"Resetting JTAG." \
|
1162 |
|
|
"Execution step completed OK." \
|
1163 |
|
|
"Shifting instruction." \
|
1164 |
|
|
" shifting in: 0x01" \
|
1165 |
|
|
" shifted out: 0x01" \
|
1166 |
|
|
" time taken:" \
|
1167 |
|
|
"Execution step completed OK." \
|
1168 |
|
|
"Selecting module." \
|
1169 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1170 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1171 |
|
|
" status: 0x0" \
|
1172 |
|
|
" time taken:" \
|
1173 |
|
|
"Execution step completed OK." \
|
1174 |
|
|
"Processing WRITE_COMMAND." \
|
1175 |
|
|
" shifting in: 0x0000000001d253d2cf800100001000c8" \
|
1176 |
|
|
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
|
1177 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1178 |
|
|
" status: 0x0" \
|
1179 |
|
|
" time taken:" \
|
1180 |
|
|
"Execution step completed OK." \
|
1181 |
|
|
"Test completed successfully."] \
|
1182 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1183 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100001" "4"
|
1184 |
|
|
|
1185 |
|
|
# Read words, aligned on byte 2
|
1186 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read words, byte 2 aligned" \
|
1187 |
|
|
[list "Initalization succeeded." \
|
1188 |
|
|
"Execution step completed OK." \
|
1189 |
|
|
"Resetting JTAG." \
|
1190 |
|
|
"Execution step completed OK." \
|
1191 |
|
|
"Shifting instruction." \
|
1192 |
|
|
" shifting in: 0x01" \
|
1193 |
|
|
" shifted out: 0x01" \
|
1194 |
|
|
" time taken:" \
|
1195 |
|
|
"Execution step completed OK." \
|
1196 |
|
|
"Selecting module." \
|
1197 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1198 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1199 |
|
|
" status: 0x0" \
|
1200 |
|
|
" time taken:" \
|
1201 |
|
|
"Execution step completed OK." \
|
1202 |
|
|
"Processing WRITE_COMMAND." \
|
1203 |
|
|
" shifting in: 0x0000000000f10cfe4f800080001000c8" \
|
1204 |
|
|
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
|
1205 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1206 |
|
|
" status: 0x0" \
|
1207 |
|
|
" time taken:" \
|
1208 |
|
|
"Execution step completed OK." \
|
1209 |
|
|
"Test completed successfully."] \
|
1210 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1211 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100002" "4"
|
1212 |
|
|
|
1213 |
|
|
# Read words, aligned on byte 3
|
1214 |
|
|
run_libsim "JTAG WRITE_COMMAND WB read words, byte 3 aligned" \
|
1215 |
|
|
[list "Initalization succeeded." \
|
1216 |
|
|
"Execution step completed OK." \
|
1217 |
|
|
"Resetting JTAG." \
|
1218 |
|
|
"Execution step completed OK." \
|
1219 |
|
|
"Shifting instruction." \
|
1220 |
|
|
" shifting in: 0x01" \
|
1221 |
|
|
" shifted out: 0x01" \
|
1222 |
|
|
" time taken:" \
|
1223 |
|
|
"Execution step completed OK." \
|
1224 |
|
|
"Selecting module." \
|
1225 |
|
|
" shifting in: 0x0000000000174841bc61" \
|
1226 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1227 |
|
|
" status: 0x0" \
|
1228 |
|
|
" time taken:" \
|
1229 |
|
|
"Execution step completed OK." \
|
1230 |
|
|
"Processing WRITE_COMMAND." \
|
1231 |
|
|
" shifting in: 0x00000000013366c94f800180001000c8" \
|
1232 |
|
|
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
|
1233 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1234 |
|
|
" status: 0x0" \
|
1235 |
|
|
" time taken:" \
|
1236 |
|
|
"Execution step completed OK." \
|
1237 |
|
|
"Test completed successfully."] \
|
1238 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1239 |
|
|
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100003" "4"
|
1240 |
|
|
|
1241 |
|
|
# Tests of WRITE_COMMAND for CPU0. Check the different access types are
|
1242 |
|
|
# accepted/rejected as expected (2 and 6 are OK).
|
1243 |
|
|
|
1244 |
|
|
# WRITE_COMMAND to write bytes for CPU0 (access type 0). This should fail
|
1245 |
|
|
# with an error message.
|
1246 |
99 |
jeremybenn |
run_libsim "JTAG WRITE_COMMAND CPU0 write bytes" \
|
1247 |
98 |
jeremybenn |
[list "Initalization succeeded." \
|
1248 |
|
|
"Execution step completed OK." \
|
1249 |
|
|
"Resetting JTAG." \
|
1250 |
|
|
"Execution step completed OK." \
|
1251 |
|
|
"Shifting instruction." \
|
1252 |
|
|
" shifting in: 0x01" \
|
1253 |
|
|
" shifted out: 0x01" \
|
1254 |
|
|
" time taken:" \
|
1255 |
|
|
"Execution step completed OK." \
|
1256 |
|
|
"Selecting module." \
|
1257 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1258 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1259 |
|
|
" status: 0x0" \
|
1260 |
|
|
" time taken:" \
|
1261 |
|
|
"Execution step completed OK." \
|
1262 |
|
|
"Processing WRITE_COMMAND." \
|
1263 |
|
|
" shifting in: 0x00000000011b285d1780010028000008" \
|
1264 |
99 |
jeremybenn |
"ERROR: JTAG 8-bit access for SPR not supported." \
|
1265 |
98 |
jeremybenn |
" shifted out: 0x164841bc600000000000000000000000" \
|
1266 |
|
|
" status: 0x0" \
|
1267 |
|
|
" time taken:" \
|
1268 |
|
|
"Execution step completed OK." \
|
1269 |
|
|
"Test completed successfully."] \
|
1270 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
1271 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "0" "2801" "4"
|
1272 |
|
|
|
1273 |
|
|
# WRITE_COMMAND to write half words for CPU0 (access type 1). This should fail
|
1274 |
|
|
# with an error message.
|
1275 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 write half words" \
|
1276 |
|
|
[list "Initalization succeeded." \
|
1277 |
|
|
"Execution step completed OK." \
|
1278 |
|
|
"Resetting JTAG." \
|
1279 |
|
|
"Execution step completed OK." \
|
1280 |
|
|
"Shifting instruction." \
|
1281 |
|
|
" shifting in: 0x01" \
|
1282 |
|
|
" shifted out: 0x01" \
|
1283 |
|
|
" time taken:" \
|
1284 |
|
|
"Execution step completed OK." \
|
1285 |
|
|
"Selecting module." \
|
1286 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1287 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1288 |
|
|
" status: 0x0" \
|
1289 |
|
|
" time taken:" \
|
1290 |
|
|
"Execution step completed OK." \
|
1291 |
|
|
"Processing WRITE_COMMAND." \
|
1292 |
|
|
" shifting in: 0x00000000000b0588f380010028000108" \
|
1293 |
99 |
jeremybenn |
"ERROR: JTAG 16-bit access for SPR not supported." \
|
1294 |
98 |
jeremybenn |
" shifted out: 0x164841bc600000000000000000000000" \
|
1295 |
|
|
" status: 0x0" \
|
1296 |
|
|
" time taken:" \
|
1297 |
|
|
"Execution step completed OK." \
|
1298 |
|
|
"Test completed successfully."] \
|
1299 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
1300 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "1" "2801" "4"
|
1301 |
|
|
|
1302 |
|
|
# WRITE_COMMAND to write words for CPU0 (access type 2).
|
1303 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 write words" \
|
1304 |
|
|
[list "Initalization succeeded." \
|
1305 |
|
|
"Execution step completed OK." \
|
1306 |
|
|
"Resetting JTAG." \
|
1307 |
|
|
"Execution step completed OK." \
|
1308 |
|
|
"Shifting instruction." \
|
1309 |
|
|
" shifting in: 0x01" \
|
1310 |
|
|
" shifted out: 0x01" \
|
1311 |
|
|
" time taken:" \
|
1312 |
|
|
"Execution step completed OK." \
|
1313 |
|
|
"Selecting module." \
|
1314 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1315 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1316 |
|
|
" status: 0x0" \
|
1317 |
|
|
" time taken:" \
|
1318 |
|
|
"Execution step completed OK." \
|
1319 |
|
|
"Processing WRITE_COMMAND." \
|
1320 |
|
|
" shifting in: 0x0000000001933eb7e580010028000088" \
|
1321 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1322 |
|
|
" status: 0x0" \
|
1323 |
|
|
" time taken:" \
|
1324 |
|
|
"Execution step completed OK." \
|
1325 |
|
|
"Test completed successfully."] \
|
1326 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
1327 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4"
|
1328 |
|
|
|
1329 |
|
|
# WRITE_COMMAND to write access type 3. This should fail with an error
|
1330 |
|
|
# message.
|
1331 |
99 |
jeremybenn |
run_libsim "JTAG WRITE_COMMAND CPU0 access type 3" \
|
1332 |
98 |
jeremybenn |
[list "Initalization succeeded." \
|
1333 |
|
|
"Execution step completed OK." \
|
1334 |
|
|
"Resetting JTAG." \
|
1335 |
|
|
"Execution step completed OK." \
|
1336 |
|
|
"Shifting instruction." \
|
1337 |
|
|
" shifting in: 0x01" \
|
1338 |
|
|
" shifted out: 0x01" \
|
1339 |
|
|
" time taken:" \
|
1340 |
|
|
"Execution step completed OK." \
|
1341 |
|
|
"Selecting module." \
|
1342 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1343 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1344 |
|
|
" status: 0x0" \
|
1345 |
|
|
" time taken:" \
|
1346 |
|
|
"Execution step completed OK." \
|
1347 |
|
|
"Processing WRITE_COMMAND." \
|
1348 |
|
|
" shifting in: 0x00000000008313620180010028000188" \
|
1349 |
99 |
jeremybenn |
"ERROR: unknown JTAG SPR access type 3." \
|
1350 |
98 |
jeremybenn |
" shifted out: 0x164841bc600000000000000000000000" \
|
1351 |
|
|
" status: 0x0" \
|
1352 |
|
|
" time taken:" \
|
1353 |
|
|
"Execution step completed OK." \
|
1354 |
|
|
"Test completed successfully."] \
|
1355 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
1356 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "3" "2801" "4"
|
1357 |
|
|
|
1358 |
|
|
# WRITE_COMMAND to read bytes for CPU0 (access type 4). This should fail
|
1359 |
|
|
# with an error message.
|
1360 |
99 |
jeremybenn |
run_libsim "JTAG WRITE_COMMAND CPU0 read bytes" \
|
1361 |
98 |
jeremybenn |
[list "Initalization succeeded." \
|
1362 |
|
|
"Execution step completed OK." \
|
1363 |
|
|
"Resetting JTAG." \
|
1364 |
|
|
"Execution step completed OK." \
|
1365 |
|
|
"Shifting instruction." \
|
1366 |
|
|
" shifting in: 0x01" \
|
1367 |
|
|
" shifted out: 0x01" \
|
1368 |
|
|
" time taken:" \
|
1369 |
|
|
"Execution step completed OK." \
|
1370 |
|
|
"Selecting module." \
|
1371 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1372 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1373 |
|
|
" status: 0x0" \
|
1374 |
|
|
" time taken:" \
|
1375 |
|
|
"Execution step completed OK." \
|
1376 |
|
|
"Processing WRITE_COMMAND." \
|
1377 |
|
|
" shifting in: 0x000000000084522e2f80010028000048" \
|
1378 |
99 |
jeremybenn |
"ERROR: JTAG 8-bit access for SPR not supported." \
|
1379 |
98 |
jeremybenn |
" shifted out: 0x164841bc600000000000000000000000" \
|
1380 |
|
|
" status: 0x0" \
|
1381 |
|
|
" time taken:" \
|
1382 |
|
|
"Execution step completed OK." \
|
1383 |
|
|
"Test completed successfully."] \
|
1384 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1385 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "4" "2801" "4"
|
1386 |
|
|
|
1387 |
|
|
# WRITE_COMMAND to read half words for CPU0 (access type 5). This should fail
|
1388 |
|
|
# with an error message.
|
1389 |
99 |
jeremybenn |
run_libsim "JTAG WRITE_COMMAND CPU0 read half words" \
|
1390 |
98 |
jeremybenn |
[list "Initalization succeeded." \
|
1391 |
|
|
"Execution step completed OK." \
|
1392 |
|
|
"Resetting JTAG." \
|
1393 |
|
|
"Execution step completed OK." \
|
1394 |
|
|
"Shifting instruction." \
|
1395 |
|
|
" shifting in: 0x01" \
|
1396 |
|
|
" shifted out: 0x01" \
|
1397 |
|
|
" time taken:" \
|
1398 |
|
|
"Execution step completed OK." \
|
1399 |
|
|
"Selecting module." \
|
1400 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1401 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1402 |
|
|
" status: 0x0" \
|
1403 |
|
|
" time taken:" \
|
1404 |
|
|
"Execution step completed OK." \
|
1405 |
|
|
"Processing WRITE_COMMAND." \
|
1406 |
|
|
" shifting in: 0x0000000001947ffbcb80010028000148" \
|
1407 |
99 |
jeremybenn |
"ERROR: JTAG 16-bit access for SPR not supported." \
|
1408 |
98 |
jeremybenn |
" shifted out: 0x164841bc600000000000000000000000" \
|
1409 |
|
|
" status: 0x0" \
|
1410 |
|
|
" time taken:" \
|
1411 |
|
|
"Execution step completed OK." \
|
1412 |
|
|
"Test completed successfully."] \
|
1413 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1414 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "5" "2801" "4"
|
1415 |
|
|
|
1416 |
|
|
# WRITE_COMMAND to read words for CPU0 (access type 6)
|
1417 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 read words" \
|
1418 |
|
|
[list "Initalization succeeded." \
|
1419 |
|
|
"Execution step completed OK." \
|
1420 |
|
|
"Resetting JTAG." \
|
1421 |
|
|
"Execution step completed OK." \
|
1422 |
|
|
"Shifting instruction." \
|
1423 |
|
|
" shifting in: 0x01" \
|
1424 |
|
|
" shifted out: 0x01" \
|
1425 |
|
|
" time taken:" \
|
1426 |
|
|
"Execution step completed OK." \
|
1427 |
|
|
"Selecting module." \
|
1428 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1429 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1430 |
|
|
" status: 0x0" \
|
1431 |
|
|
" time taken:" \
|
1432 |
|
|
"Execution step completed OK." \
|
1433 |
|
|
"Processing WRITE_COMMAND." \
|
1434 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
1435 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1436 |
|
|
" status: 0x0" \
|
1437 |
|
|
" time taken:" \
|
1438 |
|
|
"Execution step completed OK." \
|
1439 |
|
|
"Test completed successfully."] \
|
1440 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1441 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4"
|
1442 |
|
|
|
1443 |
|
|
# WRITE_COMMAND to read access type 7. This should fail with an error message.
|
1444 |
99 |
jeremybenn |
run_libsim "JTAG WRITE_COMMAND CPU0 access type 7" \
|
1445 |
98 |
jeremybenn |
[list "Initalization succeeded." \
|
1446 |
|
|
"Execution step completed OK." \
|
1447 |
|
|
"Resetting JTAG." \
|
1448 |
|
|
"Execution step completed OK." \
|
1449 |
|
|
"Shifting instruction." \
|
1450 |
|
|
" shifting in: 0x01" \
|
1451 |
|
|
" shifted out: 0x01" \
|
1452 |
|
|
" time taken:" \
|
1453 |
|
|
"Execution step completed OK." \
|
1454 |
|
|
"Selecting module." \
|
1455 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1456 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1457 |
|
|
" status: 0x0" \
|
1458 |
|
|
" time taken:" \
|
1459 |
|
|
"Execution step completed OK." \
|
1460 |
|
|
"Processing WRITE_COMMAND." \
|
1461 |
|
|
" shifting in: 0x00000000011c691139800100280001c8" \
|
1462 |
99 |
jeremybenn |
"ERROR: unknown JTAG SPR access type 7." \
|
1463 |
98 |
jeremybenn |
" shifted out: 0x164841bc600000000000000000000000" \
|
1464 |
|
|
" status: 0x0" \
|
1465 |
|
|
" time taken:" \
|
1466 |
|
|
"Execution step completed OK." \
|
1467 |
|
|
"Test completed successfully."] \
|
1468 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1469 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "7" "2801" "4"
|
1470 |
|
|
|
1471 |
|
|
# Tests of WRITE_COMMAND addresses for CPU0. Addresses up to 0xffff are
|
1472 |
|
|
# OK. Check different addresses are all accepted. For all of these we use the
|
1473 |
|
|
# simple loop and a word write. Test the boundaries (addresses 0, 0xffff and
|
1474 |
|
|
# 0x10000). Over-size addresses should be truncated with a warning. Remember
|
1475 |
|
|
# these are SPR addresses, which are effectively word addresses.
|
1476 |
|
|
|
1477 |
|
|
# WRITE_COMMAND for CPU0 to address 0
|
1478 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 write address 0" \
|
1479 |
|
|
[list "Initalization succeeded." \
|
1480 |
|
|
"Execution step completed OK." \
|
1481 |
|
|
"Resetting JTAG." \
|
1482 |
|
|
"Execution step completed OK." \
|
1483 |
|
|
"Shifting instruction." \
|
1484 |
|
|
" shifting in: 0x01" \
|
1485 |
|
|
" shifted out: 0x01" \
|
1486 |
|
|
" time taken:" \
|
1487 |
|
|
"Execution step completed OK." \
|
1488 |
|
|
"Selecting module." \
|
1489 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1490 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1491 |
|
|
" status: 0x0" \
|
1492 |
|
|
" time taken:" \
|
1493 |
|
|
"Execution step completed OK." \
|
1494 |
|
|
"Processing WRITE_COMMAND." \
|
1495 |
|
|
" shifting in: 0x0000000001efa3017580000000000088" \
|
1496 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1497 |
|
|
" status: 0x0" \
|
1498 |
|
|
" time taken:" \
|
1499 |
|
|
"Execution step completed OK." \
|
1500 |
|
|
"Test completed successfully."] \
|
1501 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
1502 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "0" "4"
|
1503 |
|
|
|
1504 |
|
|
# WRITE_COMMAND for CPU0 to address 0xffff
|
1505 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 write address 0xffff" \
|
1506 |
|
|
[list "Initalization succeeded." \
|
1507 |
|
|
"Execution step completed OK." \
|
1508 |
|
|
"Resetting JTAG." \
|
1509 |
|
|
"Execution step completed OK." \
|
1510 |
|
|
"Shifting instruction." \
|
1511 |
|
|
" shifting in: 0x01" \
|
1512 |
|
|
" shifted out: 0x01" \
|
1513 |
|
|
" time taken:" \
|
1514 |
|
|
"Execution step completed OK." \
|
1515 |
|
|
"Selecting module." \
|
1516 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1517 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1518 |
|
|
" status: 0x0" \
|
1519 |
|
|
" time taken:" \
|
1520 |
|
|
"Execution step completed OK." \
|
1521 |
|
|
"Processing WRITE_COMMAND." \
|
1522 |
|
|
" shifting in: 0x00000000012e99654d8001fffe000088" \
|
1523 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1524 |
|
|
" status: 0x0" \
|
1525 |
|
|
" time taken:" \
|
1526 |
|
|
"Execution step completed OK." \
|
1527 |
|
|
"Test completed successfully."] \
|
1528 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
1529 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "ffff" "4"
|
1530 |
|
|
|
1531 |
|
|
# WRITE_COMMAND for CPU0 to address 0x10000. Should be trucated witha
|
1532 |
|
|
# warning.
|
1533 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 write address 0x10000" \
|
1534 |
|
|
[list "Initalization succeeded." \
|
1535 |
|
|
"Execution step completed OK." \
|
1536 |
|
|
"Resetting JTAG." \
|
1537 |
|
|
"Execution step completed OK." \
|
1538 |
|
|
"Shifting instruction." \
|
1539 |
|
|
" shifting in: 0x01" \
|
1540 |
|
|
" shifted out: 0x01" \
|
1541 |
|
|
" time taken:" \
|
1542 |
|
|
"Execution step completed OK." \
|
1543 |
|
|
"Selecting module." \
|
1544 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1545 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1546 |
|
|
" status: 0x0" \
|
1547 |
|
|
" time taken:" \
|
1548 |
|
|
"Execution step completed OK." \
|
1549 |
|
|
"Processing WRITE_COMMAND." \
|
1550 |
|
|
" shifting in: 0x00000000008c6e605180000001000088" \
|
1551 |
|
|
"Warning: truncated JTAG SPR address 0x00010000." \
|
1552 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1553 |
|
|
" status: 0x0" \
|
1554 |
|
|
" time taken:" \
|
1555 |
|
|
"Execution step completed OK." \
|
1556 |
|
|
"Test completed successfully."] \
|
1557 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
|
1558 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "10000" "4"
|
1559 |
|
|
|
1560 |
|
|
# Tests of WRITE_COMMAND lengths for CPU0. Check only length 4 is
|
1561 |
|
|
# accepted. For all of these we use the simple loop and write. There is no
|
1562 |
|
|
# point in testing values outside the permitted range, since these are
|
1563 |
|
|
# rejected in the test code, rather than the target code. Test sizes 3, 4, 5
|
1564 |
|
|
# and 0x10000 bytes.
|
1565 |
|
|
|
1566 |
|
|
# Test of WRITE_COMMAND for CPU0 3 bytes. This should fail with an error
|
1567 |
|
|
# message.
|
1568 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 read length 3" \
|
1569 |
|
|
[list "Initalization succeeded." \
|
1570 |
|
|
"Execution step completed OK." \
|
1571 |
|
|
"Resetting JTAG." \
|
1572 |
|
|
"Execution step completed OK." \
|
1573 |
|
|
"Shifting instruction." \
|
1574 |
|
|
" shifting in: 0x01" \
|
1575 |
|
|
" shifted out: 0x01" \
|
1576 |
|
|
" time taken:" \
|
1577 |
|
|
"Execution step completed OK." \
|
1578 |
|
|
"Selecting module." \
|
1579 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1580 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1581 |
|
|
" status: 0x0" \
|
1582 |
|
|
" time taken:" \
|
1583 |
|
|
"Execution step completed OK." \
|
1584 |
|
|
"Processing WRITE_COMMAND." \
|
1585 |
|
|
" shifting in: 0x0000000001d735c29c800100280000c8" \
|
1586 |
|
|
"ERROR: JTAG SPR access 0x3 bytes not supported." \
|
1587 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1588 |
|
|
" status: 0x0" \
|
1589 |
|
|
" time taken:" \
|
1590 |
|
|
"Execution step completed OK." \
|
1591 |
|
|
"Test completed successfully."] \
|
1592 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1593 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "3"
|
1594 |
|
|
|
1595 |
|
|
# Test of WRITE_COMMAND for CPU0 4 bytes.
|
1596 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 read length 4" \
|
1597 |
|
|
[list "Initalization succeeded." \
|
1598 |
|
|
"Execution step completed OK." \
|
1599 |
|
|
"Resetting JTAG." \
|
1600 |
|
|
"Execution step completed OK." \
|
1601 |
|
|
"Shifting instruction." \
|
1602 |
|
|
" shifting in: 0x01" \
|
1603 |
|
|
" shifted out: 0x01" \
|
1604 |
|
|
" time taken:" \
|
1605 |
|
|
"Execution step completed OK." \
|
1606 |
|
|
"Selecting module." \
|
1607 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1608 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1609 |
|
|
" status: 0x0" \
|
1610 |
|
|
" time taken:" \
|
1611 |
|
|
"Execution step completed OK." \
|
1612 |
|
|
"Processing WRITE_COMMAND." \
|
1613 |
|
|
" shifting in: 0x00000000000c44c4dd800100280000c8" \
|
1614 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1615 |
|
|
" status: 0x0" \
|
1616 |
|
|
" time taken:" \
|
1617 |
|
|
"Execution step completed OK." \
|
1618 |
|
|
"Test completed successfully."] \
|
1619 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1620 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4"
|
1621 |
|
|
|
1622 |
|
|
# Test of WRITE_COMMAND for CPU0 5 bytes. This should fail with an error
|
1623 |
|
|
# message.
|
1624 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 read length 5" \
|
1625 |
|
|
[list "Initalization succeeded." \
|
1626 |
|
|
"Execution step completed OK." \
|
1627 |
|
|
"Resetting JTAG." \
|
1628 |
|
|
"Execution step completed OK." \
|
1629 |
|
|
"Shifting instruction." \
|
1630 |
|
|
" shifting in: 0x01" \
|
1631 |
|
|
" shifted out: 0x01" \
|
1632 |
|
|
" time taken:" \
|
1633 |
|
|
"Execution step completed OK." \
|
1634 |
|
|
"Selecting module." \
|
1635 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1636 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1637 |
|
|
" status: 0x0" \
|
1638 |
|
|
" time taken:" \
|
1639 |
|
|
"Execution step completed OK." \
|
1640 |
|
|
"Processing WRITE_COMMAND." \
|
1641 |
|
|
" shifting in: 0x00000000014c51002c400100280000c8" \
|
1642 |
|
|
"ERROR: JTAG SPR access 0x5 bytes not supported." \
|
1643 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1644 |
|
|
" status: 0x0" \
|
1645 |
|
|
" time taken:" \
|
1646 |
|
|
"Execution step completed OK." \
|
1647 |
|
|
"Test completed successfully."] \
|
1648 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1649 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "5"
|
1650 |
|
|
|
1651 |
|
|
# Test of WRITE_COMMAND for CPU0 0x10000 bytes. This should fail with an error
|
1652 |
|
|
# message.
|
1653 |
|
|
run_libsim "JTAG WRITE_COMMAND CPU0 read length 0x10000" \
|
1654 |
|
|
[list "Initalization succeeded." \
|
1655 |
|
|
"Execution step completed OK." \
|
1656 |
|
|
"Resetting JTAG." \
|
1657 |
|
|
"Execution step completed OK." \
|
1658 |
|
|
"Shifting instruction." \
|
1659 |
|
|
" shifting in: 0x01" \
|
1660 |
|
|
" shifted out: 0x01" \
|
1661 |
|
|
" time taken:" \
|
1662 |
|
|
"Execution step completed OK." \
|
1663 |
|
|
"Selecting module." \
|
1664 |
|
|
" shifting in: 0x00000000000aff51d871" \
|
1665 |
|
|
" shifted out: 0x0164841bc60000000000" \
|
1666 |
|
|
" status: 0x0" \
|
1667 |
|
|
" time taken:" \
|
1668 |
|
|
"Execution step completed OK." \
|
1669 |
|
|
"Processing WRITE_COMMAND." \
|
1670 |
|
|
" shifting in: 0x000000000046c16443ffff00280000c8" \
|
1671 |
|
|
"ERROR: JTAG SPR access 0x10000 bytes not supported." \
|
1672 |
|
|
" shifted out: 0x164841bc600000000000000000000000" \
|
1673 |
|
|
" status: 0x0" \
|
1674 |
|
|
" time taken:" \
|
1675 |
|
|
"Execution step completed OK." \
|
1676 |
|
|
"Test completed successfully."] \
|
1677 |
|
|
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
|
1678 |
|
|
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "10000"
|