Subversion Repositories openrisc_2011-10-31

# Makefile.in generated by automake 1.11.1 from Makefile.am.

# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,

# Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile.am for or1ksim testsuite test-code

# Copyright (C) Embecosm Limited, 2010

# Contributor Jeremy Bennett 

# This file is part of OpenRISC 1000 Architectural Simulator.

# This program is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License as published by the Free

# Software Foundation; either version 3 of the License, or (at your option)

# any later version.

# This program is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

# more details.

# You should have received a copy of the GNU General Public License along

# with this program.  If not, see .  */

# -----------------------------------------------------------------------------

# This code is commented throughout for use with Doxygen.

# -----------------------------------------------------------------------------

# Subdirs for each test program.

VPATH = @srcdir@

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

target_triplet = @target@

subdir = testsuite/test-code

DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \

        $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \

        $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \

        $(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

        $(ACLOCAL_M4)

mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

CONFIG_HEADER = $(top_builddir)/config.h

CONFIG_CLEAN_FILES =

CONFIG_CLEAN_VPATH_FILES =

SOURCES =

DIST_SOURCES =

RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \

        html-recursive info-recursive install-data-recursive \

        install-dvi-recursive install-exec-recursive \

        install-html-recursive install-info-recursive \

        install-pdf-recursive install-ps-recursive install-recursive \

        installcheck-recursive installdirs-recursive pdf-recursive \

        ps-recursive uninstall-recursive

RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

  distclean-recursive maintainer-clean-recursive

AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \

        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \

        distdir

ETAGS = etags

CTAGS = ctags

DIST_SUBDIRS = $(SUBDIRS)

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

am__relativize = \

  dir0=`pwd`; \

  sed_first='s,^\([^/]*\)/.*$$,\1,'; \

  sed_rest='s,^[^/]*/*,,'; \

  sed_last='s,^.*/\([^/]*\)$$,\1,'; \

  sed_butlast='s,/*[^/]*$$,,'; \

  while test -n "$$dir1"; do \

    first=`echo "$$dir1" | sed -e "$$sed_first"`; \

    if test "$$first" != "."; then \

      if test "$$first" = ".."; then \

        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

      else \

        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

        if test "$$first2" = "$$first"; then \

          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

        else \

          dir2="../$$dir2"; \

        fi; \

        dir0="$$dir0"/"$$first"; \

      fi; \

    fi; \

    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

  done; \

  reldir="$$dir2"

ACLOCAL = @ACLOCAL@

AMTAR = @AMTAR@

AR = @AR@

ARFLAGS = @ARFLAGS@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

BUILD_DIR = @BUILD_DIR@

CC = @CC@

CCAS = @CCAS@

CCASDEPMODE = @CCASDEPMODE@

CCASFLAGS = @CCASFLAGS@

CCDEPMODE = @CCDEPMODE@

CFLAGS = @CFLAGS@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CPU_ARCH = @CPU_ARCH@

CYGPATH_W = @CYGPATH_W@

DEBUGFLAGS = @DEBUGFLAGS@

DEFS = @DEFS@

DEJAGNU = @DEJAGNU@

DEPDIR = @DEPDIR@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

EXEEXT = @EXEEXT@

FGREP = @FGREP@

GREP = @GREP@

INCLUDES = @INCLUDES@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LD = @LD@

LDFLAGS = @LDFLAGS@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LIBTOOL = @LIBTOOL@

LIPO = @LIPO@

LN_S = @LN_S@

LOCAL_CFLAGS = @LOCAL_CFLAGS@

LOCAL_DEFS = @LOCAL_DEFS@

LOCAL_LDFLAGS = @LOCAL_LDFLAGS@

LTLIBOBJS = @LTLIBOBJS@

MAKEINFO = @MAKEINFO@

MKDIR_P = @MKDIR_P@

NM = @NM@

NMEDIT = @NMEDIT@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

POW_LIB = @POW_LIB@

RANLIB = @RANLIB@

RUNTESTDEFAULTFLAGS = @RUNTESTDEFAULTFLAGS@

SED = @SED@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

SUMVERSION = @SUMVERSION@

TERMCAP_LIB = @TERMCAP_LIB@

VERSION = @VERSION@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_CC = @ac_ct_CC@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localedir = @localedir@

localstatedir = @localstatedir@

lt_ECHO = @lt_ECHO@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

subdirs = @subdirs@

sysconfdir = @sysconfdir@

target = @target@

target_alias = @target_alias@

target_cpu = @target_cpu@

target_os = @target_os@

target_vendor = @target_vendor@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

SUBDIRS = lib-iftest  \

          lib-inttest \

          lib-jtag    \

          lib-upcalls

all: all-recursive

.SUFFIXES:

$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)

        @for dep in $?; do \

          case '$(am__configure_deps)' in \

            *$$dep*) \

              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

                && { if test -f $@; then exit 0; else break; fi; }; \

              exit 1;; \

          esac; \

        done; \

        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu testsuite/test-code/Makefile'; \

        $(am__cd) $(top_srcdir) && \

          $(AUTOMAKE) --gnu testsuite/test-code/Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

        @case '$?' in \

          *config.status*) \

            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

          *) \

            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(ACLOCAL_M4):  $(am__aclocal_m4_deps)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(am__aclocal_m4_deps):

mostlyclean-libtool:

        -rm -f *.lo

clean-libtool:

        -rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd

# into them and run `make' without going through this Makefile.

# To change the values of `make' variables: instead of editing Makefiles,

# (1) if the variable is set in `config.status', edit `config.status'

#     (which will cause the Makefiles to be regenerated when you run `make');

# (2) otherwise, pass the desired values on the `make' command line.

$(RECURSIVE_TARGETS):

        @fail= failcom='exit 1'; \

        for f in x $$MAKEFLAGS; do \

          case $$f in \

            *=* | --[!k]*);; \

            *k*) failcom='fail=yes';; \

          esac; \

        done; \

        dot_seen=no; \

        target=`echo $@ | sed s/-recursive//`; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            dot_seen=yes; \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

          || eval $$failcom; \

        done; \

        if test "$$dot_seen" = "no"; then \

          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

        fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):

        @fail= failcom='exit 1'; \

        for f in x $$MAKEFLAGS; do \

          case $$f in \

            *=* | --[!k]*);; \

            *k*) failcom='fail=yes';; \

          esac; \

        done; \

        dot_seen=no; \

        case "$@" in \

          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

          *) list='$(SUBDIRS)' ;; \

        esac; \

        rev=''; for subdir in $$list; do \

          if test "$$subdir" = "."; then :; else \

            rev="$$subdir $$rev"; \

          fi; \

        done; \

        rev="$$rev ."; \

        target=`echo $@ | sed s/-recursive//`; \

        for subdir in $$rev; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

          || eval $$failcom; \

        done && test -z "$$fail"

tags-recursive:

        list='$(SUBDIRS)'; for subdir in $$list; do \

          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \

        done

ctags-recursive:

        list='$(SUBDIRS)'; for subdir in $$list; do \

          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \

        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        mkid -fID $$unique

tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        set x; \

        here=`pwd`; \

        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

          include_option=--etags-include; \

          empty_fix=.; \

        else \

          include_option=--include; \

          empty_fix=; \

        fi; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            test ! -f $$subdir/TAGS || \

              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \

          fi; \

        done; \

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        shift; \

        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

          test -n "$$unique" || unique=$$empty_fix; \

          if test $$# -gt 0; then \

            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

              "$$@" $$unique; \

          else \

            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

              $$unique; \

          fi; \

        fi

ctags: CTAGS

CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        test -z "$(CTAGS_ARGS)$$unique" \

          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

             $$unique

GTAGS:

        here=`$(am__cd) $(top_builddir) && pwd` \

          && $(am__cd) $(top_srcdir) \

          && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:

        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)

        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        list='$(DISTFILES)'; \

          dist_files=`for file in $$list; do echo $$file; done | \

          sed -e "s|^$$srcdirstrip/||;t" \

              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

        case $$dist_files in \

          */*) $(MKDIR_P) `echo "$$dist_files" | \

                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

                           sort -u` ;; \

        esac; \

        for file in $$dist_files; do \

          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

          if test -d $$d/$$file; then \

            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

            if test -d "$(distdir)/$$file"; then \

              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

            fi; \

            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

            fi; \

            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

          else \

            test -f "$(distdir)/$$file" \

            || cp -p $$d/$$file "$(distdir)/$$file" \

            || exit 1; \

          fi; \

        done

        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            test -d "$(distdir)/$$subdir" \

            || $(MKDIR_P) "$(distdir)/$$subdir" \

            || exit 1; \

          fi; \

        done

        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

            $(am__relativize); \

            new_distdir=$$reldir; \

            dir1=$$subdir; dir2="$(top_distdir)"; \

            $(am__relativize); \

            new_top_distdir=$$reldir; \

            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

            ($(am__cd) $$subdir && \

              $(MAKE) $(AM_MAKEFLAGS) \

                top_distdir="$$new_top_distdir" \

                distdir="$$new_distdir" \

                am__remove_distdir=: \

                am__skip_length_check=: \

                am__skip_mode_fix=: \

                distdir) \

              || exit 1; \

          fi; \

        done

check-am: all-am

check: check-recursive

all-am: Makefile

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

install-am: all-am

        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive

install-strip:

        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

          `test -z '$(STRIP)' || \

            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

mostlyclean-generic:

clean-generic:

distclean-generic:

        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

        @echo "This command is intended for maintainers to use"

        @echo "it deletes files that may require special tools to rebuild."

clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive

        -rm -f Makefile

distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

        -rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \

        install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \

        all all-am check check-am clean clean-generic clean-libtool \

        ctags ctags-recursive distclean distclean-generic \

        distclean-libtool distclean-tags distdir dvi dvi-am html \

        html-am info info-am install install-am install-data \

        install-data-am install-dvi install-dvi-am install-exec \

        install-exec-am install-html install-html-am install-info \

        install-info-am install-man install-pdf install-pdf-am \

        install-ps install-ps-am install-strip installcheck \

        installcheck-am installdirs installdirs-am maintainer-clean \

        maintainer-clean-generic mostlyclean mostlyclean-generic \

        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \

        uninstall uninstall-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: