Subversion Repositories openrisc

/* lib-upcalls.c. Test of Or1ksim library upcall interface.

   Copyright (C) 1999-2006 OpenCores

   Copyright (C) 2010 Embecosm Limited

   Contributors various OpenCores participants

   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>

   This file is part of OpenRISC 1000 Architectural Simulator.

   This program is free software; you can redistribute it and/or modify it

   under the terms of the GNU General Public License as published by the Free

   Software Foundation; either version 3 of the License, or (at your option)

   any later version.

   This program is distributed in the hope that it will be useful, but WITHOUT

   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

   more details.

   You should have received a copy of the GNU General Public License along

   with this program.  If not, see <http:  www.gnu.org/licenses/>.  */

/* ----------------------------------------------------------------------------

   This code is commented throughout for use with Doxygen.

   --------------------------------------------------------------------------*/

#include <errno.h>

#include <stddef.h>

#include <stdlib.h>

#include <stdio.h>

#include <string.h>

#include "or1ksim.h"

/*! Memory mapped register memory */

static unsigned char *regv;

/*! Number of bytes of register memory */

static int  regc;

/*! Number of times each upcall has been called */

static int  upcall_count;

/* --------------------------------------------------------------------------*/

/*!Read upcall

   Upcall from Or1ksim to read a word from an external peripheral. Read the

   specified bytes from the peripheral if available.

   We only ever expect to get 4 byte reads here (modeling Wishbone).

   @note We receive the full address, since there is a single upcall routine,

         and this allows us to decode between potentially multiple devices.

   @todo We assume that the register memory size is a power of 2, making

         address shortening a simple modulo exercise. We should use a more

         generic solution.

   @note The mask is a byte mask. Since this is testing, we warn if any byte

         is not either 0xff or 0x00.

   @param[in]  class_ptr  A handle pass back from the initalization. Intended

                          for C++ callers, not used here.

   @param[in]  addr       Address to read from.

   @param[in]  mask       Byte mask for the read.

   @param[out] rdata      Buffer for the data read.

   @param[in]  data_len   Number of bytes in mask and rdata.

   @return  Zero on success, non-zero on failure.                            */

/* --------------------------------------------------------------------------*/

static int

read_upcall (void              *class_ptr,

             unsigned long int  addr,

             unsigned char      mask[],

             unsigned char      rdata[],

             int                data_len)

{

  unsigned long int  devaddr = addr % regc;

  upcall_count--;                       /* One less upcall to do */

  if (4 != data_len)

    {

      printf ("Warning: 4-byte reads only supported for this device.\n");

      return  -1;

    }

  if (devaddr > regc - data_len)

    {

      printf ("Warning: read from 0x%08lx out of range: zero result.\n",

              devaddr);

      return  -1;

    }

  /* Read the data */

  int  i;

  for (i = 0; i < 4; i++)

    {

      switch (mask[i])

        {

        case 0x00: rdata[i] = 0;                 break;

        case 0xff: rdata[i] = regv[devaddr + i]; break;

        default:

          printf ("Warning: invalid mask byte %d for read 0x%02x: "

                  "treated as 0xff.\n", i, mask[i]);

          rdata[i] = regv[devaddr + i];

          break;

        }

    }

  /* printf ("Read from 0x%08lx: vector [%02x %02x %02x %02x ], " */

  /*      "mask [%02x %02x %02x %02x ].\n", devaddr, rdata[0], rdata[1], */

  /*      rdata[2], rdata[3], mask[0], mask[1], mask[2], mask[3]); */

  return  0;                     /* Success */

}       /* read_upcall () */

/* --------------------------------------------------------------------------*/

/*!Write upcall

   Upcall from Or1ksim to write a word to an external peripheral. Read the

   specified bytes from the peripheral if available.

   We only ever expect to get 4 byte reads here (modeling Wishbone).

   @note We receive the full address, since there is a single upcall routine,

         and this allows us to decode between potentially multiple devices.

   @todo We assume that the register memory size is a power of 2, making

         address shortening a simple modulo exercise. We should use a more

         generic solution.

   @note The mask is a byte mask. Since this is testing, we warn if any byte

         is not either 0xff or 0x00.

   @param[in] class_ptr  A handle pass back from the initalization. Intended

                         for C++ callers, not used here.

   @param[in] addr       Address to write to.

   @param[in] mask       Byte mask for the write.

   @param[in] wdata      The data to write.

   @param[in] data_len   Number of bytes in mask and rdata.

   @return  Zero on success, non-zero on failure.                            */

/* --------------------------------------------------------------------------*/

static int

write_upcall (void              *class_ptr,

              unsigned long int  addr,

              unsigned char      mask[],

              unsigned char      wdata[],

              int                data_len)

{

  unsigned long int  devaddr  = addr % regc;

  upcall_count--;                       /* One less upcall to do */

  if (4 != data_len)

    {

      printf ("Warning: 4-byte writes only supported for this device.\n");

      return  -1;

    }

  if (devaddr > regc - data_len)

    {

      printf ("Warning: write to 0x%08lx out of range: ignored.\n",

              devaddr);

      return  -1;

    }

  /* printf ("Write to 0x%08lx: vector [%02x %02x %02x %02x ], " */

  /*      "mask [%02x %02x %02x %02x ].\n", devaddr, wdata[0], wdata[1], */

  /*      wdata[2], wdata[3], mask[0], mask[1], mask[2], mask[3]); */

  /* Write the data */

  int  i;

  for (i = 0; i < 4; i++)

    {

      switch (mask[i])

        {

        case 0x00:                               break;

        case 0xff: regv[devaddr + i] = wdata[i]; break;

        default:

          printf ("Warning: invalid mask byte %d for write 0x%02x: "

                  "treated as 0xff.\n", i, mask[i]);

          regv[devaddr + i] = wdata[i];

          break;

        }

    }

  return  0;                     /* Success */

}       /* write_upcall () */

/* --------------------------------------------------------------------------*/

/*!Main program

   Build an or1ksim program using the library which loads a program and config

   from the command line which will drive upcalls.

   lib-upcalls <config-file> <image> <upcall_count> <reg_bytes> [<reg_file>]

   A register memory of <reg_bytes> bytes is initalized from <reg_file> if

   present, or zeroed if not. <image> is run continuously, making upcalls,

   which are satisfied using the register memory. The program exits

   successfully when <upcall_count> upcalls have been made.

   @param[in] argc  Number of elements in argv

   @param[in] argv  Vector of program name and arguments

   @return  Return code for the program.                                     */

/* --------------------------------------------------------------------------*/

int

main (int   argc,

      char *argv[])

{

  char *reg_file;

  /* Parse args */

  switch (argc)

    {

    case 5:

      reg_file = NULL;

      break;

    case 6:

      reg_file = argv[5];

      break;

    default:

      printf ("usage: lib-upcalls <config-file> <image> "

              "<upcall_count> <reg_bytes> [<reg_file>]\n");

      return  1;

    }

  upcall_count = atoi (argv[3]);

  if (upcall_count <= 0)

    {

      printf ("ERROR: Upcall count must be positive\n");

      return  1;

    }

  regc = atoi (argv[4]);

  if (regc < 0)

    {

      printf ("ERROR: Register memory size must be positive\n");

      return  1;

    }

  /* Read the register file if provided. */

  regv = malloc (regc * sizeof (unsigned char));

  if (NULL == regv)

    {

      printf ("ERROR: Failed to allocate register memory\n");

      return  1;

    }

  int  next_free_byte = 0;

  if (NULL != reg_file)

    {

      FILE *fd = fopen (reg_file, "r");

      if (NULL == fd)

        {

          printf ("ERROR: Failed to open register file: %s\n",

                  strerror (errno));

          free (regv);

          return  1;

        }

      for (; next_free_byte < regc; next_free_byte++)

        {

          unsigned char  byte;

          if (1 == fscanf (fd, "%2hhx ", &byte))

            {

              regv[next_free_byte] = byte;

            }

          else

            {

              break;

            }

        }

      /* Should have read the whole file successfully. */

      if (ferror (fd))

        {

          printf ("ERROR: Reading register file: %s\n", strerror (errno));

          free (regv);

          return  1;

        }

      if (!feof (fd))

        {

          printf ("Warning: additional register file data ignored.\n");

        }

      if (0 != fclose (fd))

        {

          printf ("ERROR: Failed to close register file: %s\n",

                  strerror (errno));

          free (regv);

          return  1;

        }

    }

  /* Fill in any remaining bytes with zero */

  if (next_free_byte < regc)

    {

      (void)memset (&(regv[next_free_byte]), 0, regc - next_free_byte);

    }

  /* Dummy argv array to pass arguments to or1ksim_init. Varies depending on

     whether an image file is specified. */

  int   dummy_argc;

  char *dummy_argv[5];

  dummy_argv[0] = "libsim";

  dummy_argv[1] = "-q";

  dummy_argv[2] = "-f";

  dummy_argv[3] = argv[1];

  dummy_argv[4] = argv[2];

  dummy_argc = 5;

  /* Initialize the program. Put the initialization message afterwards, or it

     will get swamped by the Or1ksim header. */

  if (0 == or1ksim_init (dummy_argc, dummy_argv, NULL, &read_upcall,

                         &write_upcall))

    {

      printf ("Initalization succeeded.\n");

    }

  else

    {

      printf ("Initalization failed.\n");

      return  1;

    }

  /* Run repeatedly for 1 millisecond until we hit a breakpoint or all upcalls

     are done. */

  do

    {

      switch (or1ksim_run (1.0e-3))

        {

        case OR1KSIM_RC_OK:

          break;

        case OR1KSIM_RC_BRKPT:

          printf ("Test completed successfully: hit breakpoint.\n");

          return  0;

        default:

          printf ("ERROR: run failed\n");

          return  1;

        }

    }

  while (upcall_count > 0);

  /* A little longer to allow response to last upcall to be handled. */

  switch (or1ksim_run (1.0e-3))

    {

    case OR1KSIM_RC_OK:

      printf ("Test completed successfully: All upcalls processed.\n");

      return  0;

    case OR1KSIM_RC_BRKPT:

      printf ("Test completed successfully: hit breakpoint.\n");

      return  0;

    default:

      printf ("ERROR: run failed\n");

      return  1;

    }

}       /* main () */