Subversion Repositories openrisc_me

// ----------------------------------------------------------------------------

// SystemC GDB RSP server: definition

// Copyright (C) 2008  Embecosm Limited <info@embecosm.com>

// Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>

// This file is part of the GDB interface to the cycle accurate model of the

// OpenRISC 1000 based system-on-chip, ORPSoC, built using Verilator.

// This program is free software: you can redistribute it and/or modify it

// under the terms of the GNU Lesser General Public License as published by

// the Free Software Foundation, either version 3 of the License, or (at your

// option) any later version.

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public

// License for more details.

// You should have received a copy of the GNU Lesser General Public License

// along with this program.  If not, see <http://www.gnu.org/licenses/>.

// ----------------------------------------------------------------------------

// $Id$

#ifndef GDB_SERVER_SC__H

#define GDB_SERVER_SC__H

#include <stdint.h>

#include "systemc"

#include "JtagSC_includes.h"

#include "OrpsocAccess.h"

#include "RspConnection.h"

#include "MpHash.h"

#include "RspPacket.h"

#include "DebugUnitSC.h"

//! Module implementing a GDB RSP server.

//! A thread listens for RSP requests, which are converted to requests to read

//! and write registers, memory or control the CPU in the debug unit

class GdbServerSC

  : public sc_core::sc_module

{

public:

  // Constructor and destructor

  GdbServerSC (sc_core::sc_module_name        name,

               uint32_t                       _flashStart,

               uint32_t                       _flashEnd,

               int                            rspPort,

               sc_core::sc_fifo<TapAction *> *tapActionQueue);

  ~GdbServerSC ();

private:

  //! Definition of GDB target signals.

  //! Data taken from the GDB 6.8 source. Only those we use defined here.

  enum TargetSignal {

    TARGET_SIGNAL_NONE =  0,

    TARGET_SIGNAL_INT  =  2,

    TARGET_SIGNAL_ILL  =  4,

    TARGET_SIGNAL_TRAP =  5,

    TARGET_SIGNAL_FPE  =  8,

    TARGET_SIGNAL_BUS  = 10,

    TARGET_SIGNAL_SEGV = 11,

    TARGET_SIGNAL_ALRM = 14,

    TARGET_SIGNAL_USR2 = 31,

    TARGET_SIGNAL_PWR  = 32

  };

  // Register numbering. Matches GDB client

  static const int  MAX_SPRS   = 0x10000;       //!< Max number of OR1K SPRs

  static const int  max_gprs   = 32;            //!< Max number of OR1K GPRs

  static const int  PPC_REGNUM = max_gprs + 0;   //!< Previous PC

  static const int  NPC_REGNUM = max_gprs + 1;  //!< Next PC

  static const int  SR_REGNUM  = max_gprs + 2;  //!< Supervision Register

  static const int  NUM_REGS   = max_gprs + 3;  //!< Total GDB registers

  //! Maximum size of a GDB RSP packet

  //static const int  RSP_PKT_MAX  = NUM_REGS * 8 + 1;

  static const int  RSP_PKT_MAX  = 1024*16;

  // OpenRISC exception addresses. Only the ones we need to know about

  static const uint32_t  EXCEPT_NONE  = 0x000;  //!< No exception

  static const uint32_t  EXCEPT_RESET = 0x100;  //!< Reset

  // SPR numbers

  static const uint16_t  SPR_NPC  = 0x0010;     //!< Next program counter

  static const uint16_t  SPR_SR   = 0x0011;     //!< Supervision register

  static const uint16_t  SPR_PPC  = 0x0012;     //!< Previous program counter

  static const uint16_t  SPR_GPR0 = 0x0400;     //!< GPR 0

  static const uint16_t  SPR_DVR0 = 0x3000;     //!< Debug value register 0

  static const uint16_t  SPR_DVR1 = 0x3001;     //!< Debug value register 1

  static const uint16_t  SPR_DVR2 = 0x3002;     //!< Debug value register 2

  static const uint16_t  SPR_DVR3 = 0x3003;     //!< Debug value register 3

  static const uint16_t  SPR_DVR4 = 0x3004;     //!< Debug value register 4

  static const uint16_t  SPR_DVR5 = 0x3005;     //!< Debug value register 5

  static const uint16_t  SPR_DVR6 = 0x3006;     //!< Debug value register 6

  static const uint16_t  SPR_DVR7 = 0x3007;     //!< Debug value register 7

  static const uint16_t  SPR_DCR0 = 0x3008;     //!< Debug control register 0

  static const uint16_t  SPR_DCR1 = 0x3009;     //!< Debug control register 1

  static const uint16_t  SPR_DCR2 = 0x300a;     //!< Debug control register 2

  static const uint16_t  SPR_DCR3 = 0x300b;     //!< Debug control register 3

  static const uint16_t  SPR_DCR4 = 0x300c;     //!< Debug control register 4

  static const uint16_t  SPR_DCR5 = 0x300d;     //!< Debug control register 5

  static const uint16_t  SPR_DCR6 = 0x300e;     //!< Debug control register 6

  static const uint16_t  SPR_DCR7 = 0x300f;     //!< Debug control register 7  

  static const uint16_t  SPR_DMR1 = 0x3010;     //!< Debug mode register 1

  static const uint16_t  SPR_DMR2 = 0x3011;     //!< Debug mode register 2

  static const uint16_t  SPR_DSR  = 0x3014;     //!< Debug stop register

  static const uint16_t  SPR_DRR  = 0x3015;     //!< Debug reason register

  // SPR masks and offsets

  static const uint32_t  SPR_DMR1_ST   = 0x00400000;  //!< Single-step trace

  static const uint32_t  SPR_DMR2_WGB  = 0x003ff000;  //!< W/pt generating B/pt

  static const uint32_t  SPR_DMR2_WBS  = 0xffc00000;  //!< W/pt B/pt status

  static const uint32_t  SPR_DSR_TE    = 0x00002000;  //!< Trap

  static const uint32_t  SPR_DCR_DP_MASK  = 0x00000001;  //!< Debug Pair Present

  static const uint32_t  SPR_DCR_CC_MASK  = 0x0000000e;  //!< Compare Condition

  static const uint32_t  SPR_DCR_SC_MASK  = 0x00000010;  //!< Signed Comparison

  static const uint32_t  SPR_DCR_CT_MASK  = 0x000000e0;  //!< Compare To

  static const uint32_t  SPR_DMR2_WGB_SHIFT  = 12;  //!< W/pt Generate B/pt

  // DRR (Debug Reason Register) Bits

  static const uint32_t SPR_DRR_RSTE   = 0x00000001;  //!< Reset

  static const uint32_t SPR_DRR_BUSEE  = 0x00000002;  //!< Bus error

  static const uint32_t SPR_DRR_DPFE   = 0x00000004;  //!< Data page fault

  static const uint32_t SPR_DRR_IPFE   = 0x00000008;  //!< Insn page fault

  static const uint32_t SPR_DRR_TTE    = 0x00000010;  //!< Tick timer

  static const uint32_t SPR_DRR_AE     = 0x00000020;  //!< Alignment

  static const uint32_t SPR_DRR_IIE    = 0x00000040;  //!< Illegal instruction

  static const uint32_t SPR_DRR_IE     = 0x00000080;  //!< Interrupt

  static const uint32_t SPR_DRR_DME    = 0x00000100;  //!< DTLB miss

  static const uint32_t SPR_DRR_IME    = 0x00000200;  //!< ITLB miss

  static const uint32_t SPR_DRR_RE     = 0x00000400;  //!< Range fault

  static const uint32_t SPR_DRR_SCE    = 0x00000800;  //!< System call

  static const uint32_t SPR_DRR_FPE    = 0x00001000;  //!< Floating point

  static const uint32_t SPR_DRR_TE     = 0x00002000;  //!< Trap

  //! RSP Signal valu

  uint32_t rsp_sigval;

  //! Trap instruction for OR32

  static const uint32_t  OR1K_TRAP_INSTR = 0x21000001;

  //! Thread ID used by Or1ksim

  static const int  OR1KSIM_TID = 1;

  // The bounds of flash memory

  uint32_t  flashStart;                 //<! Start of flash memory

  uint32_t  flashEnd;                   //<! End of flash memory

  //! Our associated Debug Unit

  DebugUnitSC *debugUnit;

  //! Our associated RSP interface (which we create)

  RspConnection *rsp;

  //! The packet pointer. There is only ever one packet in use at one time, so

  //! there is no need to repeatedly allocate and delete it.

  RspPacket *pkt;

  //! Hash table for matchpoints

  MpHash *mpHash;

  //! Is the target stopped

  bool  targetStopped;

  // SystemC thread to listen for and service RSP requests

  void  rspServer ();

  // Main RSP request handler

  void  rspClientRequest ();

  // Handle the various RSP requests

  void  rspCheckForException();

  void  rspReportException ();

  void  rspContinue ();

  void  rspContinue (uint32_t   except);

  void  rspContinue (uint32_t  addr,

                     uint32_t  except);

  void  rspInterrupt ();

  void  rspReadAllRegs ();

  void  rspWriteAllRegs ();

  void  rspReadMem ();

  void  rspWriteMem ();

  void  rspReadReg ();

  void  rspWriteReg ();

  void  rspQuery ();

  void  rspCommand ();

  void  rspSet ();

  void  rspRestart ();

  void  rspStep ();

  void  rspStep (uint32_t   except);

  void  rspStep (uint32_t  addr,

                 uint32_t  except);

  void  rspVpkt ();

  void  rspWriteMemBin ();

  void  rspRemoveMatchpoint ();

  void  rspInsertMatchpoint ();

  // Convenience wrappers for getting particular registers, which are really

  // SPRs.

  uint32_t  readNpc ();

  void      writeNpc (uint32_t  addr);

  uint32_t  readGpr (int  regNum);

  void      writeGpr (int       regNum,

                      uint32_t  value);

  // Check if we got a message from the or1200 monitor module telling us

  // to stall

  bool   checkMonitorPipe ();

};      // GdbServerSC ()

#endif  // GDB_SERVER_SC__H