URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [include/] [cfi_flash_data.h] - Blame information for rev 811

Go to most recent revision | Details | Compare with Previous | View Log


//          _/             _/_/
//        _/_/           _/_/_/
//      _/_/_/_/         _/_/_/
//      _/_/_/_/_/       _/_/_/              ____________________________________________ 
//      _/_/_/_/_/       _/_/_/             /                                           / 
//      _/_/_/_/_/       _/_/_/            /                                 28F256P30 / 
//      _/_/_/_/_/       _/_/_/           /                                           /  
//      _/_/_/_/_/_/     _/_/_/          /                                   256Mbit / 
//      _/_/_/_/_/_/     _/_/_/         /                                single die / 
//      _/_/_/ _/_/_/    _/_/_/        /                                           / 
//      _/_/_/  _/_/_/   _/_/_/       /                  Verilog Behavioral Model / 
//      _/_/_/   _/_/_/  _/_/_/      /                               Version 1.3 / 
//      _/_/_/    _/_/_/ _/_/_/     /                                           /
//      _/_/_/     _/_/_/_/_/_/    /           Copyright (c) 2010 Numonyx B.V. / 
//      _/_/_/      _/_/_/_/_/    /___________________________________________/ 
//      _/_/_/       _/_/_/_/      
//      _/_/          _/_/_/  
// 
//     
//             NUMONYX              
 
// ******
//
// data.h
//
// ******
 
// ********************
//
// Main Characteristics
//
// ********************
 
`define ADDRBUS_dim 24                        // - Address Bus pin numbers
`define DATABUS_dim 16                        // - Data Bus pin numbers
`define MEMORY_dim 1 << `ADDRBUS_dim          // - Memory Dimension
`define LAST_ADDR  (`MEMORY_dim) - 1          // - Last Address
 
// ********************
//
// Address & Data range
//
// ********************
 
`define ADDRBUS_range `ADDRBUS_dim - 1 : 0
`define DATABUS_range `DATABUS_dim - 1 : 0
 
// *****************
//
// Init Memory Files
//
// *****************
 
`define CFI_dim 9'h157
`define CFI_range `CFI_dim - 1:9'h10
// *******************
//
// Protection Register 
//
// *******************
 
 
`define REG_addrStart           16'h0
`define REG_addrEnd             16'h15
 
`define REGSTART_addr           9'h80                       // Protection Register Start Address
`define REGEND_addr            9'h109                        // Protection Register End   Address
`define REG_dim                 `REGEND_addr - `REGSTART_addr + 1
 
`define REG_addrRange           `REG_addrEnd:`REG_addrStart
 
`define REG_addrbitStart        8'd0
`define REG_addrbitEnd          8'd8
`define REG_addrbitRange        `REG_addrbitEnd:`REG_addrbitStart
 
`define PROTECTREGLOCK_addr    9'h80                        // Protection Register Lock Address
 
 
`define UDNREGSTART_addr        9'h81
`define UDNREGEND_addr          9'h84
`define UDNprotect_bit          8'hFE
 
`define UPREGSTART_addr         9'h85
`define UPREGEND_addr           9'h88
`define UPprotect_bit           8'hFD // serve ad indentificare quale bit deve essere 0 nel lock regi
`define PRL_default             16'h0002  // Protection Register Lock default definito anche in def  
 
// *****************************
//
// Extended User OTP
//
// *****************************
 
`define ExtREG_dim                  8'h20
 
 
`define ExtREG_regiondim           8'h8
`define ExtREGSTART_regionaddr   9'h8A      // Ext Protection Register Start Address
`define ExtREGEND_regionaddr    9'h109      // Ext Protection Register End   Address
 
`define ExtPROTECTREGLOCK_addr   9'h89      // Ext Protection Register Lock Address
`define ExtPRL_default         16'hFFFF  // Protection Register Lock default   
 
 
 
// ***********************
//
// Voltage Characteristics
//
// ***********************
`define Voltage_range    35:0
`define VDDmin           36'd01700
`define VDDmax           36'd02000
`define VDDQmin          36'd01700
`define VDDQmax          36'd03600
`define VPPmin           36'd00900
`define VPPmax           36'd03600
`define VPPHmin          36'd08500
`define VPPHmax          36'd09500
 
// **********************
//
// Configuration Register
//
// **********************
 
`define ConfigurationReg_dim    16
`define ConfigReg_default       16'hF94F
 
// ********************
//
// Electronic Signature
//
// ********************
 
`define ManufacturerCode      8'h89
`define TopDeviceCode         8'h19
`define BottomDeviceCode      8'h1C
`define SignAddress_dim       9
`define SignAddress_range     `SignAddress_dim - 1 : 0
 
 
 
// *********************
//
// Write Buffer constant
//
// *********************
 
 
`define ProgramBuffer_addrDim           9         // Program Buffer address dimension
`define ProgramBuffer_addrRange         `ProgramBuffer_addrDim - 1:0
`define ProgramBuffer_dim              512        // Buffer Size= 2 ^ ProgramBuffer_addrDim
`define ProgramBuffer_range             `ProgramBuffer_dim - 1:0
 
// *********************
//
// Buffer Enhanced Program constant
//
// *********************
 
`define BuffEnhProgramBuffer_dim  512
`define BuffEnhProgramBuffer_range  `BuffEnhProgramBuffer_dim - 1 : 0
`define BuffEnhProgramBuffer_addrDim  9
`define BuffEnhProgramBuffer_addrRange  `BuffEnhProgramBuffer_addrDim - 1:0
 
 
// Warning and Error Messages 
 
`define NoError_msg             0       // No Error Found
`define CmdSeq_msg              1       // Sequence Command Unknown
`define SuspCmd_msg             2       // Cannot execute this command during suspend
`define SuspAcc_msg             3       // Cannot access this address due to suspend
`define AddrRange_msg           4       // Address out of range
`define AddrTog_msg             5       // Cannot change block address during command sequence
`define SuspAccWarn_msg         6       // It isn't possible access this address due to suspend
`define InvVDD_msg              7       // Voltage Supply must be: VDD>VDDmin or VDD<VDDmax
`define InvVPP_msg              8       // Voltage Supply must be: VDD>VDDmin or VDD<VDDmax
`define BlockLock_msg           9       // Cannot complete operation when the block is locked
`define ByteToggle_msg          10      // Cannot toggle BYTE_N while busy
`define NoUnLock_msg            11      // Invalid UnLock Block command in Locked-Down Block
`define AddrCFI_msg             12      // CFI Address out of range
`define PreProg_msg             13      // Program Failure due to cell failure
`define NoBusy_msg              14      // Device is not Busy
`define NoSusp_msg              15      // Nothing previus suspend command
`define Suspend_msg             16      // Device is Suspend mode
`define UDNlock_msg             17      // Unique Device Number Register is locked
`define UPlock_msg              18      // User Programmable Register is locked
`define ExitPHASE_BEFP_msg     19
`define WrongEraseConfirm_msg   20      // Wrong Erase Confirm code
`define SignAddrRange_msg      21       // Signature Address out of range
`define CFIAddrRange_msg       22       // CFI Address out of range
`define WrongBlankCheckConfirm_msg   23 // Wrong Blank Check Confirm code command
`define BlankCheckFailed_msg    24 //  Blank Check Failed
`define ProgramPHASE_BEFP_msg  25  // End of Program or Verify Phase on Enhanced Factory Program
`define BlkBuffer_msg          26       // Program Buffer cannot cross block boundary
`define ExtREGLock_msg         27       // Extended User Programmable Register is locked
`define LeastAddr0             28       // Significative bit [%d,0] of Start Address must be 0
`define ProtRegAddrRange_msg   29       // Protect Register Address out of range
`define BuffSize_msg           30       // Buffer size is too large
`define WrongBlankCheckBlock 31 // No main block
 
// ******************
//
// Valid Access Times
//
// ******************
 
`define tAccess_1      100
`define tAccess_2      110
 
 
 
 

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [include/] [cfi_flash_data.h] - Blame information for rev 811

Line No.	Rev	Author	Line
1	655	julius	`// _/ _/_/`
2			`// _/_/ _/_/_/`
3			`// _/_/_/_/ _/_/_/`
4			`// _/_/_/_/_/ _/_/_/ ____________________________________________`
5			`// _/_/_/_/_/ _/_/_/ / /`
6			`// _/_/_/_/_/ _/_/_/ / 28F256P30 /`
7			`// _/_/_/_/_/ _/_/_/ / /`
8			`// _/_/_/_/_/_/ _/_/_/ / 256Mbit /`
9			`// _/_/_/_/_/_/ _/_/_/ / single die /`
10			`// _/_/_/ _/_/_/ _/_/_/ / /`
11			`// _/_/_/ _/_/_/ _/_/_/ / Verilog Behavioral Model /`
12			`// _/_/_/ _/_/_/ _/_/_/ / Version 1.3 /`
13			`// _/_/_/ _/_/_/ _/_/_/ / /`
14			`// _/_/_/ _/_/_/_/_/_/ / Copyright (c) 2010 Numonyx B.V. /`
15			`// _/_/_/ _/_/_/_/_/ /___________________________________________/`
16			`// _/_/_/ _/_/_/_/`
17			`// _/_/ _/_/_/`
18			`//`
19			`//`
20			`// NUMONYX`
21
22			`// ******`
23			`//`
24			`// data.h`
25			`//`
26			`// ******`
27
28			`// ********************`
29			`//`
30			`// Main Characteristics`
31			`//`
32			`// ********************`
33
34			`define ADDRBUS_dim 24 // - Address Bus pin numbers
35			`define DATABUS_dim 16 // - Data Bus pin numbers
36			`define MEMORY_dim 1 << `ADDRBUS_dim // - Memory Dimension
37			`define LAST_ADDR (`MEMORY_dim) - 1 // - Last Address
38
39			`// ********************`
40			`//`
41			`// Address & Data range`
42			`//`
43			`// ********************`
44
45			`define ADDRBUS_range `ADDRBUS_dim - 1 : 0
46			`define DATABUS_range `DATABUS_dim - 1 : 0
47
48			`// *****************`
49			`//`
50			`// Init Memory Files`
51			`//`
52			`// *****************`
53
54			`define CFI_dim 9'h157
55			`define CFI_range `CFI_dim - 1:9'h10
56			`// *******************`
57			`//`
58			`// Protection Register`
59			`//`
60			`// *******************`
61
62
63			`define REG_addrStart 16'h0
64			`define REG_addrEnd 16'h15
65
66			`define REGSTART_addr 9'h80 // Protection Register Start Address
67			`define REGEND_addr 9'h109 // Protection Register End Address
68			`define REG_dim `REGEND_addr - `REGSTART_addr + 1
69
70			`define REG_addrRange `REG_addrEnd:`REG_addrStart
71
72			`define REG_addrbitStart 8'd0
73			`define REG_addrbitEnd 8'd8
74			`define REG_addrbitRange `REG_addrbitEnd:`REG_addrbitStart
75
76			`define PROTECTREGLOCK_addr 9'h80 // Protection Register Lock Address
77
78
79			`define UDNREGSTART_addr 9'h81
80			`define UDNREGEND_addr 9'h84
81			`define UDNprotect_bit 8'hFE
82
83			`define UPREGSTART_addr 9'h85
84			`define UPREGEND_addr 9'h88
85			`define UPprotect_bit 8'hFD // serve ad indentificare quale bit deve essere 0 nel lock regi
86			`define PRL_default 16'h0002 // Protection Register Lock default definito anche in def
87
88			`// *****************************`
89			`//`
90			`// Extended User OTP`
91			`//`
92			`// *****************************`
93
94			`define ExtREG_dim 8'h20
95
96
97			`define ExtREG_regiondim 8'h8
98			`define ExtREGSTART_regionaddr 9'h8A // Ext Protection Register Start Address
99			`define ExtREGEND_regionaddr 9'h109 // Ext Protection Register End Address
100
101			`define ExtPROTECTREGLOCK_addr 9'h89 // Ext Protection Register Lock Address
102			`define ExtPRL_default 16'hFFFF // Protection Register Lock default
103
104
105
106			`// ***********************`
107			`//`
108			`// Voltage Characteristics`
109			`//`
110			`// ***********************`
111			`define Voltage_range 35:0
112			`define VDDmin 36'd01700
113			`define VDDmax 36'd02000
114			`define VDDQmin 36'd01700
115			`define VDDQmax 36'd03600
116			`define VPPmin 36'd00900
117			`define VPPmax 36'd03600
118			`define VPPHmin 36'd08500
119			`define VPPHmax 36'd09500
120
121			`// **********************`
122			`//`
123			`// Configuration Register`
124			`//`
125			`// **********************`
126
127			`define ConfigurationReg_dim 16
128			`define ConfigReg_default 16'hF94F
129
130			`// ********************`
131			`//`
132			`// Electronic Signature`
133			`//`
134			`// ********************`
135
136			`define ManufacturerCode 8'h89
137			`define TopDeviceCode 8'h19
138			`define BottomDeviceCode 8'h1C
139			`define SignAddress_dim 9
140			`define SignAddress_range `SignAddress_dim - 1 : 0
141
142
143
144			`// *********************`
145			`//`
146			`// Write Buffer constant`
147			`//`
148			`// *********************`
149
150
151			`define ProgramBuffer_addrDim 9 // Program Buffer address dimension
152			`define ProgramBuffer_addrRange `ProgramBuffer_addrDim - 1:0
153			`define ProgramBuffer_dim 512 // Buffer Size= 2 ^ ProgramBuffer_addrDim
154			`define ProgramBuffer_range `ProgramBuffer_dim - 1:0
155
156			`// *********************`
157			`//`
158			`// Buffer Enhanced Program constant`
159			`//`
160			`// *********************`
161
162			`define BuffEnhProgramBuffer_dim 512
163			`define BuffEnhProgramBuffer_range `BuffEnhProgramBuffer_dim - 1 : 0
164			`define BuffEnhProgramBuffer_addrDim 9
165			`define BuffEnhProgramBuffer_addrRange `BuffEnhProgramBuffer_addrDim - 1:0
166
167
168			`// Warning and Error Messages`
169
170			`define NoError_msg 0 // No Error Found
171			`define CmdSeq_msg 1 // Sequence Command Unknown
172			`define SuspCmd_msg 2 // Cannot execute this command during suspend
173			`define SuspAcc_msg 3 // Cannot access this address due to suspend
174			`define AddrRange_msg 4 // Address out of range
175			`define AddrTog_msg 5 // Cannot change block address during command sequence
176			`define SuspAccWarn_msg 6 // It isn't possible access this address due to suspend
177			`define InvVDD_msg 7 // Voltage Supply must be: VDD>VDDmin or VDD<VDDmax
178			`define InvVPP_msg 8 // Voltage Supply must be: VDD>VDDmin or VDD<VDDmax
179			`define BlockLock_msg 9 // Cannot complete operation when the block is locked
180			`define ByteToggle_msg 10 // Cannot toggle BYTE_N while busy
181			`define NoUnLock_msg 11 // Invalid UnLock Block command in Locked-Down Block
182			`define AddrCFI_msg 12 // CFI Address out of range
183			`define PreProg_msg 13 // Program Failure due to cell failure
184			`define NoBusy_msg 14 // Device is not Busy
185			`define NoSusp_msg 15 // Nothing previus suspend command
186			`define Suspend_msg 16 // Device is Suspend mode
187			`define UDNlock_msg 17 // Unique Device Number Register is locked
188			`define UPlock_msg 18 // User Programmable Register is locked
189			`define ExitPHASE_BEFP_msg 19
190			`define WrongEraseConfirm_msg 20 // Wrong Erase Confirm code
191			`define SignAddrRange_msg 21 // Signature Address out of range
192			`define CFIAddrRange_msg 22 // CFI Address out of range
193			`define WrongBlankCheckConfirm_msg 23 // Wrong Blank Check Confirm code command
194			`define BlankCheckFailed_msg 24 // Blank Check Failed
195			`define ProgramPHASE_BEFP_msg 25 // End of Program or Verify Phase on Enhanced Factory Program
196			`define BlkBuffer_msg 26 // Program Buffer cannot cross block boundary
197			`define ExtREGLock_msg 27 // Extended User Programmable Register is locked
198			`define LeastAddr0 28 // Significative bit [%d,0] of Start Address must be 0
199			`define ProtRegAddrRange_msg 29 // Protect Register Address out of range
200			`define BuffSize_msg 30 // Buffer size is too large
201			`define WrongBlankCheckBlock 31 // No main block
202
203			`// ******************`
204			`//`
205			`// Valid Access Times`
206			`//`
207			`// ******************`
208
209			`define tAccess_1 100
210			`define tAccess_2 110
211
212
213
214