URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [vpi/] [verilog/] [vpi_debug_module.v] - Blame information for rev 811

Go to most recent revision | Details | Compare with Previous | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  ORPSoC Testbench                                            ////
////                                                              ////
////  Description                                                 ////
////  ORPSoC VPI Debugging Testbench file                         ////
////                                                              ////
////  To Do:                                                      ////
////                                                              ////
////                                                              ////
////  Author(s):                                                  ////
////      - jb, jb@orsoc.se                                       ////
////                                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2009 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
`timescale 1ns/10ps
 
`include "vpi_debug_defines.v"
 
// uncomment the following line to get more debug output for this module 
//`define DEBUG_INFO
//`define VPI_DEBUG_INFO
 
module vpi_debug_module(tms, tck, tdi, tdo);
 
   output               tms;
   output               tck;
   output               tdi;
   input                tdo;
 
   reg                  tms;
   reg                  tck;
   reg                  tdi;
 
   reg [31:0]            in_data_le, in_data_be;
   reg [31:0]            incoming_word;
   reg                  err;
   integer              i;
 
   reg [31:0]            id;
   reg [31:0]            npc;
   reg [31:0]            ppc;
   reg [31:0]            r1;
   reg [31:0]            insn;
   reg [31:0]            result;
   reg [31:0]            tmp;
 
   reg [31:0]            crc_out;
   reg [31:0]            crc_in;
   wire                 crc_match_in;
 
   reg [`DBG_TOP_STATUS_LEN -1:0] status;
   reg [`DBG_WB_STATUS_LEN -1:0]  status_wb;
   reg [`DBG_CPU_STATUS_LEN -1:0] status_cpu;
 
   // Text used for easier debugging
   reg [199:0]                     test_text;
   reg [`DBG_WB_CMD_LEN -1:0]      last_wb_cmd;
   reg [`DBG_CPU_CMD_LEN -1:0]     last_cpu_cmd;
   reg [199:0]                     last_wb_cmd_text;
   reg [199:0]                     last_cpu_cmd_text;
 
   reg [31:0]                      data_storage [0:4095];   // Data storage (for write and read operations). 
   reg [18:0]                      length_global;
 
   parameter                      Tp    = 1;
//parameter Tck   = 25;   // Clock half period (Clok period = 50 ns => 20 MHz)
   parameter                      Tck   = 50;   // Clock half period (Clok period = 100 ns => 10 MHz)
 
   integer cmd;
   integer block_cmd_length;
   integer jtag_instn_val;
   integer set_chain_val;
 
   reg [1:0] cpu_ctrl_val; // two important bits for the ctrl reg
   reg [31:0] cmd_adr;
   reg [31:0]  cmd_size;
   reg [31:0] cmd_data;
 
 
   initial
     begin
        $display("JTAG debug module with VPI interface enabled\n");
        tck    <=#Tp 1'b0;
        tdi    <=#Tp 1'bz;
        tms    <=#Tp 1'b0;
 
        // Insert a #delay here because we need to
        // wait until the PC isn't pointing to flash anymore
        // (this is around 20k ns if the flash_crash boot code
        // is being booted from, else much bigger, around 10mil ns)
 
        #2_000 main;
 
     end
 
   task main;
      begin
 
         id     <=#Tp 32'h00;
         npc    <=#Tp 32'h00;
         ppc    <=#Tp 32'h00;
         insn   <=#Tp 32'h00;
         result <=#Tp 32'h00;
         err    <=#Tp 1'b0;
         tmp    <=#Tp 32'h00;
 
        // execute some cycles
         #50000;
 
         reset_tap;
         goto_run_test_idle;
 
         //$init_rsp_server();
 
         while (1) begin
 
           // Check for incoming command
 
           // wait until a command is sent
           // poll with a delay here
           cmd = -1;
 
           while (cmd == -1)
             begin
                #1000 $check_for_command(cmd);
             end
 
            // now switch on the command
            case (cmd)
 
              `CMD_RESET : // reset
                begin
 
                   // call reset task
                   reset_tap;
                   // and put TAP into run_test_idle state
                   goto_run_test_idle;
 
               end
 
              `CMD_JTAG_SET_IR : // set jtag instruction register
                begin
 
                   $get_command_data(jtag_instn_val);
 
                   set_instruction(jtag_instn_val);
 
               end
              `CMD_SET_DEBUG_CHAIN : // set debug chain
               begin
 
                  $get_command_data(set_chain_val);
 
                  module_select(set_chain_val, 1'b0);   // {chain, gen_crc_err}
 
               end
             `CMD_CPU_CTRL_WR : // cpu CTRL write
               begin
 
                  $get_command_data(cpu_ctrl_val);
 
                  debug_cpu_wr_ctrl(cpu_ctrl_val, "");
 
               end
 
             `CMD_CPU_CTRL_RD : // cpu CTRL read
               begin
 
                  debug_cpu_rd_ctrl(cpu_ctrl_val);
 
                  $return_command_data(4,cpu_ctrl_val);
 
               end
 
             `CMD_CPU_WR_REG :
               begin
 
                  $get_command_address(cmd_adr);
 
                  $get_command_data(block_cmd_length);
 
                  $get_command_block_data(block_cmd_length, data_storage);
 
                  if (block_cmd_length > 4)
                    cpu_write_block(cmd_adr, block_cmd_length);
                  else
                    begin
                       cmd_data = data_storage[0]; // Get the single word we'll write
                       cpu_write_32(cmd_data, cmd_adr,16'h3);
`ifdef VPI_DEBUG_INFO
                  $display("CPU reg write. adr: 0x%x (reg group: %d reg#: %d), val: 0x%x",
                           cmd_adr,cmd_adr[15:11], cmd_adr[10:0], cmd_data);
`endif
                    end
 
 
 
               end
 
             `CMD_CPU_RD_REG :
               begin
 
                  $get_command_address(cmd_adr);
 
                  $get_command_data(block_cmd_length); // Added 090901 --jb
 
                  /* Depending on size, issue a block or single read */
                  if (block_cmd_length > 4 )
                    cpu_read_block(cmd_adr, block_cmd_length);
                  else
                    cpu_read_32(cmd_data, cmd_adr, 16'h3);
 
 
`ifdef VPI_DEBUG_INFO
                  if (cmd_size > 4 )
                    $display("CPU reg read. block adr: 0x%x (reg group: %d reg#: %d), num: %d",
                                cmd_adr,cmd_adr[15:11], cmd_adr[10:0],  block_cmd_length);
                  else
                    $display("CPU reg read. adr: 0x%x (reg group: %d reg#: %d), val: 0x%x",
                                cmd_adr,cmd_adr[15:11], cmd_adr[10:0], cmd_data);
`endif
 
 
                  $return_command_block_data(block_cmd_length, data_storage);
 
               end
 
             `CMD_WB_WR :
               begin
 
                  $get_command_address(cmd_adr);
 
                  $get_command_data(cmd_size);
 
                  $get_command_data(cmd_data);
 
                  case (cmd_size)
                    4 :
                      begin
                         wb_write_32(cmd_data, cmd_adr, 16'h3);
                      end
                    2 :
                      begin
                         wb_write_16(cmd_data[15:0], cmd_adr, 16'h1);
                      end
                    1 :
                      begin
                         wb_write_8(cmd_data[7:0], cmd_adr, 16'h0);
                      end
                    default:
                      begin
                         $display("* vpi_debug_module: CMD_WB_WR size incorrect: %d\n", cmd_size);
                      end
                  endcase // case (cmd_size)
 
               end
 
             `CMD_WB_RD32 :
               begin
 
                  $get_command_address(cmd_adr);
 
                  wb_read_32(cmd_data, cmd_adr, 16'h3);
 
                  $return_command_data(4,cmd_data);
 
               end
 
             `CMD_WB_RD8 :
               begin
 
                  $get_command_address(cmd_adr);
 
                  wb_read_8(cmd_data, cmd_adr, 16'h0);
 
                  $return_command_data(1,cmd_data);
 
               end
 
             `CMD_WB_BLOCK_WR32 :
               begin
 
                  $get_command_address(cmd_adr);
 
                  $get_command_data(block_cmd_length);
 
                  $get_command_block_data(block_cmd_length, data_storage);
 
                  wb_block_write_32(cmd_adr ,block_cmd_length);
 
               end
 
              `CMD_WB_BLOCK_RD32 :
                begin
 
                   $get_command_address(cmd_adr);
 
                   $get_command_data(block_cmd_length);
 
                   wb_block_read_32(cmd_adr, block_cmd_length);
 
                   $return_command_block_data(block_cmd_length, data_storage);
 
                end
 
              `CMD_READ_JTAG_ID :
                begin
 
                   read_id_code(id);
 
                   $return_command_data(4,id);
 
                end
 
              `CMD_GDB_DETACH :
                begin
 
                   $display("(%t)(%m)Debugging client disconnected. Finishing simulation", $time);
 
 
                   $finish();
 
                end
 
              default:
                begin
                   $display("Somehow got to the default case in the command case statement.");
                   $display("Command was: %x", cmd);
                   $display("Exiting...");
 
                   $finish();//shouldn't be here
                end
 
            endcase // case (cmd)
 
            // send back response, which is currently nothing
            // but could be used to signal something
            $return_response();
 
         end // while (1)
      end
 
   endtask // main
 
 
 
   // Receiving data and calculating input crc
   always @(posedge tck)
     begin
        in_data_be[31:1] <= #1 in_data_be[30:0];
        in_data_be[0]    <= #1 tdo;
 
        in_data_le[31]   <= #1 tdo;
        in_data_le[30:0] <= #1 in_data_le[31:1];
     end
 
   // Generation of the TCK signal
   task gen_clk;
      input [31:0] number;
      integer      i;
      begin
         for(i=0; i<number; i=i+1)
           begin
              #Tck tck<=1;
              #Tck tck<=0;
           end
      end
   endtask
 
   // TAP reset
   task reset_tap;
 
      begin
`ifdef DEBUG_INFO
         $display("(%0t) Task reset_tap", $time);
`endif
         tms<=#1 1'b1;
         gen_clk(5);
      end
   endtask
 
 
   // Goes to RunTestIdle state
   task goto_run_test_idle;
      begin
`ifdef DEBUG_INFO
         $display("(%0t) Task goto_run_test_idle", $time);
`endif
         tms<=#1 1'b0;
         gen_clk(1);
      end
   endtask
 
   // sets the instruction to the IR register and goes to the RunTestIdle state
   task set_instruction;
      input [3:0] instr;
      integer     i;
 
      begin
`ifdef DEBUG_INFO
         case (instr)
           `EXTEST          : $display("(%0t) Task set_instruction (EXTEST)", $time);
           `SAMPLE_PRELOAD  : $display("(%0t) Task set_instruction (SAMPLE_PRELOAD)", $time);
           `IDCODE          : $display("(%0t) Task set_instruction (IDCODE)", $time);
           `DEBUG           : $display("(%0t) Task set_instruction (DEBUG)", $time);
           `MBIST           : $display("(%0t) Task set_instruction (MBIST)", $time);
           `BYPASS          : $display("(%0t) Task set_instruction (BYPASS)", $time);
           default
             begin
                $display("(%0t) Task set_instruction (Unsupported instruction !!!)", $time);
                $display("\tERROR: Unsupported instruction !!!", $time);
                $stop;
             end
         endcase
`endif
 
         tms<=#1 1;
         gen_clk(2);
         tms<=#1 0;
         gen_clk(2);  // we are in shiftIR
 
         for(i=0; i<`IR_LENGTH-1; i=i+1)
           begin
              tdi<=#1 instr[i];
              gen_clk(1);
           end
 
         tdi<=#1 instr[i]; // last shift
         tms<=#1 1;        // going out of shiftIR
         gen_clk(1);
         tdi<=#1 'hz;    // tri-state
         gen_clk(1);
         tms<=#1 0;
         gen_clk(1);       // we are in RunTestIdle
      end
   endtask
 
 
   // send 32 bits through the device
   task test_bypass;
      input  [31:0] in;
      output [31:0] out;
      integer       i;
 
      reg [31:0]    out;
 
      begin
         tms<=#Tp 1;
         gen_clk(1);
         tms<=#Tp 0;
         gen_clk(2);             // we are in shiftDR
 
         for(i=31; i>=0; i=i-1)
           begin
              tdi<=#Tp in[i];
              gen_clk(1);
           end
 
         tms<=#Tp 1;             // going out of shiftDR
         gen_clk(1);
 
         out <=#Tp in_data_be;
         tdi<=#Tp 'hz;
 
         gen_clk(1);
         tms<=#Tp 0;
         gen_clk(1);             // we are in RunTestIdle
      end
   endtask
 
   // Reads the ID code
   task read_id_code;
      output [31:0] code;
      reg [31:0]    code;
      begin
`ifdef DEBUG_INFO
         $display("(%0t) Task read_id_code", $time);
`endif
 
         tms<=#1 1;
         gen_clk(1);
         tms<=#1 0;
         gen_clk(2);  // we are in shiftDR
 
         tdi<=#1 0;
         gen_clk(31);
 
         tms<=#1 1;        // going out of shiftIR
         gen_clk(1);
 
         code = in_data_le;
 
         tdi<=#1 'hz; // tri-state
         gen_clk(1);
         tms<=#1 0;
         gen_clk(1);       // we are in RunTestIdle
      end
   endtask
 
   // test bundary scan chain
   task test_bs;
      input  [31:0] in;
      output [31:0] out;
      integer       i;
 
      reg [31:0]    out;
 
      begin
         tms<=#Tp 1;
         gen_clk(1);
         tms<=#Tp 0;
         gen_clk(2);             // we are in shiftDR
 
         for(i=31; i>=0; i=i-1)
           begin
              tdi<=#Tp in[i];
              gen_clk(1);
           end
 
         gen_clk(`BS_CELL_NB-1);
         tms<=#Tp 1;             // going out of shiftDR
         gen_clk(1);
 
         out <=#Tp in_data_be;
 
         gen_clk(1);
         tms<=#Tp 0;
         gen_clk(1);             // we are in RunTestIdle
      end
   endtask
 
 
 
   // sets the selected scan chain and goes to the RunTestIdle state
   task module_select;
      input [`DBG_TOP_MODULE_ID_LENGTH -1:0]  data;
      input                                   gen_crc_err;
      integer                                 i;
 
      begin
`ifdef DEBUG_INFO
         case (data)
           `DBG_TOP_CPU1_DEBUG_MODULE : $display("(%0t) Task module_select (DBG_TOP_CPU1_DEBUG_MODULE, gen_crc_err=%0d)", $time, gen_crc_err);
           `DBG_TOP_CPU0_DEBUG_MODULE : $display("(%0t) Task module_select (DBG_TOP_CPU0_DEBUG_MODULE, gen_crc_err=%0d)", $time, gen_crc_err);
           `DBG_TOP_WISHBONE_DEBUG_MODULE : $display("(%0t) Task module_select (DBG_TOP_WISHBONE_DEBUG_MODULE gen_crc_err=%0d)", $time, gen_crc_err);
           default               : $display("(%0t) Task module_select (ERROR!!! Unknown module selected)", $time);
         endcase
`endif
 
         tms<=#1 1'b1;
         gen_clk(1);
         tms<=#1 1'b0;
         gen_clk(2);  // we are in shiftDR
 
         status = {`DBG_TOP_STATUS_LEN{1'b0}};    // Initialize status to all 0's
         crc_out = {`DBG_TOP_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff    
         tdi<=#1 1'b1; // module_select bit
         calculate_crc(1'b1);
         gen_clk(1);
 
         for(i=`DBG_TOP_MODULE_ID_LENGTH -1; i>=0; i=i-1) // Shifting module ID
           begin
              tdi<=#1 data[i];
              calculate_crc(data[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_TOP_CRC_LEN -1; i>=0; i=i-1)
           begin
              if (gen_crc_err & (i==0))  // Generate crc error at last crc bit
                tdi<=#1 ~crc_out[i];   // error crc
              else
                tdi<=#1 crc_out[i];    // ok crc
 
              gen_clk(1);
           end
 
         tdi<=#1 1'hz;  // tri-state
 
         crc_in = {`DBG_TOP_CRC_LEN{1'b1}};  // Initialize incoming CRC to all ff
 
         for(i=`DBG_TOP_STATUS_LEN -1; i>=0; i=i-1)
           begin
              gen_clk(1);     // Generating 1 clock to read out a status bit.
              status[i] = tdo;
           end
 
         for(i=0; i<`DBG_TOP_CRC_LEN -1; i=i+1)
           gen_clk(1);
 
         tms<=#1 1'b1;
         gen_clk(1);         // to exit1_dr
 
         if (~crc_match_in)
           begin
              $display("(%0t) Incoming CRC failed !!!", $time);
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to update_dr
         tms<=#1 1'b0;
         gen_clk(1);         // to run_test_idle
 
         if (|status)
           begin
              $write("(*E) (%0t) Module select error: ", $time);
              casex (status)
                4'b1xxx : $display("CRC error !!!\n\n", $time);
                4'bx1xx : $display("Non-existing module selected !!!\n\n", $time);
                4'bxx1x : $display("Status[1] should be 1'b0 !!!\n\n", $time);
                4'bxxx1 : $display("Status[0] should be 1'b0 !!!\n\n", $time);
              endcase
`ifdef DEBUG_INFO
              $stop;
`endif
           end
      end
   endtask   // module_select
 
 
 
   // 32-bit write to the wishbone
   task wb_write_32;
      input [31:0] data;
      input [`DBG_WB_ADR_LEN -1:0] addr;
      input [`DBG_WB_LEN_LEN -1:0] length;
 
      begin
         data_storage[0] = data;
         debug_wishbone_wr_comm(`DBG_WB_WRITE32, addr, length, 1'b0);
         last_wb_cmd = `DBG_WB_WRITE32;  last_wb_cmd_text = "DBG_WB_WRITE32";
         length_global = length + 1;
         debug_wishbone_go(1'b0, 1'b0);
         //debug_wishbone_go(1'b1, 1'b0); // maybe causes underrun/overrun error when wait for WB ready?
         if (length>3)
           $display("WARNING: Only first data word is stored for writting ( See module %m)");
      end
   endtask
 
   // block 32-bit write to the wishbone
   // presumes data is already in data_storage[]
   task wb_block_write_32;
 
      input [`DBG_WB_ADR_LEN -1:0] addr;
      input [`DBG_WB_LEN_LEN -1:0] length;
 
      begin
 
         debug_wishbone_wr_comm(`DBG_WB_WRITE32, addr, length-1, 1'b0);
 
         last_wb_cmd = `DBG_WB_WRITE32;  last_wb_cmd_text = "DBG_WB_WRITE32";
 
         length_global = length; // number of bytes!
 
         debug_wishbone_go(1'b0, 1'b0);
 
         //debug_wishbone_go(1'b1, 1'b0); // maybe causes underrun/overrun error when wait for WB ready?
 
      end
   endtask
 
   // 32-bit read from the wishbone
   task wb_read_32;
 
    output [31:0] data;
 
    input [`DBG_WB_ADR_LEN -1:0] addr;
    input [`DBG_WB_LEN_LEN -1:0] length;
 
      begin
         debug_wishbone_wr_comm(`DBG_WB_READ32, addr, length, 1'b0);
         last_wb_cmd = `DBG_WB_READ32;  last_wb_cmd_text = "DBG_WB_READ32";
         length_global = length + 1;
         //debug_wishbone_go(1'b0, 1'b0);
         debug_wishbone_go(1'b1, 1'b0);
         data = data_storage[0];
         if (length>3)
           $display("WARNING: Only first data word is stored for writting ( See module %m)");
      end
   endtask // wb_read_32
 
   // 8-bit read from the wishbone
   task wb_read_8;
 
    output [31:0] data;
 
    input [`DBG_WB_ADR_LEN -1:0] addr;
    input [`DBG_WB_LEN_LEN -1:0] length;
 
      begin
         debug_wishbone_wr_comm(`DBG_WB_READ8, addr, length, 1'b0);
         last_wb_cmd = `DBG_WB_READ8;  last_wb_cmd_text = "DBG_WB_READ8";
         length_global = length + 1;
         debug_wishbone_go(1'b1, 1'b0);
         data = data_storage[0];
      end
   endtask // wb_read_8
 
 
 
   // block 32-bit read from the wishbone
   // assumes data will be stored into data_storage[]
   task wb_block_read_32;
 
    input [`DBG_WB_ADR_LEN -1:0] addr;
    input [`DBG_WB_LEN_LEN -1:0] length;
 
      begin
         debug_wishbone_wr_comm(`DBG_WB_READ32, addr, length-1, 1'b0);
 
         last_wb_cmd = `DBG_WB_READ32;  last_wb_cmd_text = "DBG_WB_READ32";
 
         length_global = length;
 
         //debug_wishbone_go(1'b0, 1'b0);
         debug_wishbone_go(1'b1, 1'b0);
 
      end
   endtask
 
 
   // 16-bit write to the wishbone
   task wb_write_16;
      input [15:0] data;
      input [`DBG_WB_ADR_LEN -1:0] addr;
      input [`DBG_WB_LEN_LEN -1:0] length;
 
      begin
         data_storage[0] = {data, 16'h0};
         debug_wishbone_wr_comm(`DBG_WB_WRITE16, addr, length, 1'b0);
         last_wb_cmd = `DBG_WB_WRITE16;  last_wb_cmd_text = "DBG_WB_WRITE16";
         length_global = length + 1;
         debug_wishbone_go(1'b0, 1'b0);
         if (length>1)
           $display("WARNING: Only first data half is stored for writting ( See module %m)");
      end
   endtask
 
 
 
   // 8-bit write to the wishbone
   task wb_write_8;
      input [7:0] data;
      input [`DBG_WB_ADR_LEN -1:0] addr;
      input [`DBG_WB_LEN_LEN -1:0] length;
 
      begin
         data_storage[0] = {data, 24'h0};
         debug_wishbone_wr_comm(`DBG_WB_WRITE8, addr, length, 1'b0);
         last_wb_cmd = `DBG_WB_WRITE8;  last_wb_cmd_text = "DBG_WB_WRITE8";
         length_global = length + 1;
         debug_wishbone_go(1'b0, 1'b0);
         if (length>0)
           $display("WARNING: Only first data byte is stored for writting ( See module %m)");
      end
   endtask
 
 
 
   task debug_wishbone_wr_comm;
      input [`DBG_WB_ACC_TYPE_LEN -1:0]   acc_type;
      input [`DBG_WB_ADR_LEN -1:0]         addr;
      input [`DBG_WB_LEN_LEN -1:0]         length;
      input                               gen_crc_err;
      integer                             i;
      reg [`DBG_WB_CMD_LEN -1:0]           command;
 
      begin
`ifdef DEBUG_INFO
         $display("(%0t) Task debug_wishbone_wr_comm: ", $time);
`endif
 
         command = `DBG_WB_WR_COMM;
         tms<=#1 1'b1;
         gen_clk(1);
         tms<=#1 1'b0;
         gen_clk(2);  // we are in shiftDR
 
         crc_out = {`DBG_WB_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff
 
         tdi<=#1 1'b0; // module_select bit = 0
         calculate_crc(1'b0);
         gen_clk(1);
 
         for(i=`DBG_WB_CMD_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 command[i]; // command
              calculate_crc(command[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_WB_ACC_TYPE_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 acc_type[i]; // command
              calculate_crc(acc_type[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_WB_ADR_LEN -1; i>=0; i=i-1)       // address
           begin
              tdi<=#1 addr[i];
              calculate_crc(addr[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_WB_LEN_LEN -1; i>=0; i=i-1)       // length
           begin
              tdi<=#1 length[i];
              calculate_crc(length[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_WB_CRC_LEN -1; i>=0; i=i-1)
           begin
              if (gen_crc_err & (i==0))  // Generate crc error at last crc bit
                tdi<=#1 ~crc_out[i];   // error crc
              else
                tdi<=#1 crc_out[i];    // ok crc
 
              gen_clk(1);
           end
 
         tdi<=#1 1'hz;
 
         crc_in = {`DBG_WB_CRC_LEN{1'b1}};  // Initialize incoming CRC to all ff
 
         for(i=`DBG_WB_STATUS_LEN -1; i>=0; i=i-1)
           begin
              gen_clk(1);     // Generating clock to read out a status bit.
              status_wb[i] = tdo;
           end
 
         if (|status_wb)
           begin
              $write("(*E) (%0t) debug_wishbone_wr_comm error: ", $time);
              casex (status_wb)
                4'b1xxx : $display("CRC error !!!\n\n", $time);
                4'bx1xx : $display("Unknown command !!!\n\n", $time);
                4'bxx1x : $display("WISHBONE error !!!\n\n", $time);
                4'bxxx1 : $display("Overrun/Underrun !!!\n\n", $time);
              endcase
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
 
         for(i=0; i<`DBG_WB_CRC_LEN -1; i=i+1)  // Getting in the CRC
           begin
              gen_clk(1);
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to exit1_dr
 
         if (~crc_match_in)
           begin
              $display("(%0t) Incoming CRC failed !!!", $time);
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to update_dr
         tms<=#1 1'b0;
         gen_clk(1);         // to run_test_idle
      end
   endtask       // debug_wishbone_wr_comm
 
 
 
   task debug_wishbone_go;
 
      input         wait_for_wb_ready;
      input         gen_crc_err;
      integer       i;
      reg [4:0]     bit_pointer;
      integer       word_pointer;
      reg [31:0]    tmp_data;
      reg [`DBG_WB_CMD_LEN -1:0] command;
 
 
      begin
 
`ifdef DEBUG_INFO
         $display("(%0t) Task debug_wishbone_go (previous command was %0s): ", $time, last_wb_cmd_text);
`endif
 
         command = `DBG_WB_GO;
         word_pointer = 0;
 
         tms<=#1 1'b1;
         gen_clk(1);
         tms<=#1 1'b0;
         gen_clk(2);  // we are in shiftDR
 
         crc_out = {`DBG_WB_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff
 
         tdi<=#1 1'b0; // module_select bit = 0
         calculate_crc(1'b0);
         gen_clk(1);
 
         for(i=`DBG_WB_CMD_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 command[i]; // command
              calculate_crc(command[i]);
              gen_clk(1);
           end
 
         // W R I T E
         if (
             (last_wb_cmd == `DBG_WB_WRITE8) | (last_wb_cmd == `DBG_WB_WRITE16) |
             (last_wb_cmd == `DBG_WB_WRITE32)
             )  // When WB_WRITEx was previously activated, data needs to be shifted.
           begin
              for (i=0; i<((length_global) << 3); i=i+1)
                begin
 
                   if ((!(i%32)) && (i>0))
                     begin
                        word_pointer = word_pointer + 1;
                     end
 
                   tmp_data = data_storage[word_pointer];
 
                   bit_pointer = 31-i[4:0];
 
                   tdi<=#1 tmp_data[bit_pointer];
 
                   calculate_crc(tmp_data[bit_pointer]);
 
                   gen_clk(1);
 
                end
           end
 
         for(i=`DBG_WB_CRC_LEN -1; i>=1; i=i-1)
           begin
              tdi<=#1 crc_out[i];
              gen_clk(1);
           end
 
         if (gen_crc_err)  // Generate crc error at last crc bit
           tdi<=#1 ~crc_out[0];   // error crc
         else
           tdi<=#1 crc_out[0];    // ok crc
 
         if (wait_for_wb_ready)
           begin
              tms<=#1 1'b1;
              gen_clk(1);       // to exit1_dr. Last CRC is shifted on this clk
              tms<=#1 1'b0;
              gen_clk(1);       // to pause_dr
 
              #2;             // wait a bit for tdo to activate
              while (tdo)     // waiting for wb to send "ready"
                begin
                   gen_clk(1);       // staying in pause_dr
                end
 
              tms<=#1 1'b1;
              gen_clk(1);       // to exit2_dr
              tms<=#1 1'b0;
              gen_clk(1);       // to shift_dr
           end
         else
           begin
              gen_clk(1);       // Last CRC is shifted on this clk
           end
 
 
         tdi<=#1 1'hz;
 
         // R E A D
 
         crc_in = {`DBG_WB_CRC_LEN{1'b1}};  // Initialize incoming CRC to all ff
 
         if (
             (last_wb_cmd == `DBG_WB_READ8) | (last_wb_cmd == `DBG_WB_READ16) |
             (last_wb_cmd == `DBG_WB_READ32)
             )  // When WB_READx was previously activated, data needs to be shifted.
           begin
 
`ifdef DEBUG_INFO
              $display("\t\tGenerating %0d clocks to read %0d data bytes.", length_global<<3, length_global);
`endif
              word_pointer = 0; // Reset pointer
 
              for (i=0; i<(length_global<<3); i=i+1)
                begin
 
                   gen_clk(1);
 
                   if (i[2:0] == 7)   // Latching data
                        incoming_word = {incoming_word[23:0],in_data_be[7:0]};
 
                   if (i[4:0] == 31)
                     begin
                        data_storage[word_pointer] = incoming_word;
`ifdef DEBUG_INFO
                        $display("\t\tin_data_be = 0x%x", incoming_word);
`endif
                        word_pointer = word_pointer + 1;
 
                     end
                end // for (i=0; i<(length_global<<3); i=i+1)
 
              // Copy in any leftovers
              if (length_global[1:0] != 0)
                begin
                   data_storage[word_pointer] = incoming_word;
`ifdef DEBUG_INFO
                   $display("\t\tin_data_be = 0x%x", incoming_word);
`endif
                end
           end
 
         for(i=`DBG_WB_STATUS_LEN -1; i>=0; i=i-1)
           begin
 
              gen_clk(1);     // Generating clock to read out a status bit.
              status_wb[i] = tdo;
 
           end
 
         if (|status_wb)
           begin
              $write("(*E) (%0t) debug_wishbone_go error: ", $time);
              casex (status_wb)
                4'b1xxx : $display("CRC error !!!\n\n", $time);
                4'bx1xx : $display("Unknown command !!!\n\n", $time);
                4'bxx1x : $display("WISHBONE error !!!\n\n", $time);
                4'bxxx1 : $display("Overrun/Underrun !!!\n\n", $time);
              endcase
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
 
         for(i=0; i<`DBG_WB_CRC_LEN -1; i=i+1)  // Getting in the CRC
           begin
              gen_clk(1);
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to exit1_dr
 
         if (~crc_match_in)
           begin
              $display("(%0t) Incoming CRC failed !!!", $time);
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to update_dr
         tms<=#1 1'b0;
         gen_clk(1);         // to run_test_idle
      end
   endtask       // debug_wishbone_go
 
 
 
   task debug_cpu_wr_ctrl;
      input [`DBG_CPU_DR_LEN -1:0]  data;
      input [99:0]                   text;
      integer                       i;
      reg [`DBG_CPU_CMD_LEN -1:0]   command;
 
      begin
         test_text = text;
 
`ifdef DEBUG_INFO
         $display("(%0t) Task debug_cpu_wr_ctrl (data=0x%0x (%0s))", $time, data, text);
`endif
 
         command = `DBG_CPU_WR_CTRL;
         tms<=#1 1'b1;
         gen_clk(1);
         tms<=#1 1'b0;
         gen_clk(2);  // we are in shiftDR
 
         crc_out = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff
 
         tdi<=#1 1'b0; // module_select bit = 0
         calculate_crc(1'b0);
         gen_clk(1);
 
         for(i=`DBG_CPU_CMD_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 command[i]; // command
              calculate_crc(command[i]);
              gen_clk(1);
           end
 
 
         for(i=`DBG_CPU_CTRL_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 data[i];                                    // data (used cotrol bits
              calculate_crc(data[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_CPU_DR_LEN - `DBG_CPU_CTRL_LEN -1; i>=0; i=i-1)  // unused control bits
           begin
              tdi<=#1 1'b0;
              calculate_crc(1'b0);
              gen_clk(1);
           end
 
 
         for(i=`DBG_CPU_CRC_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 crc_out[i];    // ok crc
              gen_clk(1);
           end
 
         tdi<=#1 1'hz;
 
         crc_in = {`DBG_CPU_CRC_LEN{1'b1}};  // Initialize incoming CRC to all ff
 
         for(i=`DBG_CPU_STATUS_LEN -1; i>=0; i=i-1)
           begin
              gen_clk(1);     // Generating clock to read out a status bit.
              status_cpu[i] = tdo;
           end
 
         if (|status_cpu)
           begin
              $write("(*E) (%0t) debug_cpu_wr_ctrl error: ", $time);
              casex (status_cpu)
                4'b1xxx : $display("CRC error !!!\n\n", $time);
                4'bx1xx : $display("??? error !!!\n\n", $time);
                4'bxx1x : $display("??? error !!!\n\n", $time);
                4'bxxx1 : $display("??? error !!!\n\n", $time);
              endcase
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
 
         for(i=0; i<`DBG_CPU_CRC_LEN -1; i=i+1)  // Getting in the CRC
           begin
              gen_clk(1);
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to exit1_dr
 
         if (~crc_match_in)
           begin
              $display("(%0t) Incoming CRC failed !!!", $time);
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to update_dr
         tms<=#1 1'b0;
         gen_clk(1);         // to run_test_idle
      end
   endtask       // debug_cpu_wr_ctrl
 
   task debug_cpu_rd_ctrl;
      output [`DBG_CPU_DR_LEN -1:0]  data;
      //input [99:0]                 text;
      integer                        i;
      reg [`DBG_CPU_CMD_LEN -1:0]    command;
 
      begin
 
 
`ifdef DEBUG_INFO
         $display("(%0t) Task debug_cpu_rd_ctrl", $time);
`endif
 
         command = `DBG_CPU_RD_CTRL;
         tms<=#1 1'b1;
         gen_clk(1);
         tms<=#1 1'b0;
         gen_clk(2);  // we are in shiftDR
 
         crc_out = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff
 
         tdi<=#1 1'b0; // module_select bit = 0
         calculate_crc(1'b0);
         gen_clk(1);
 
         for(i=`DBG_CPU_CMD_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 command[i]; // command
              calculate_crc(command[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_CPU_CRC_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 crc_out[i];    // ok crc
              gen_clk(1);
           end
 
         tdi<=#1 1'hz;
 
         crc_in = {`DBG_CPU_CRC_LEN{1'b1}};  // Initialize incoming CRC to all ff
 
         // Read incoming debug ctrl data (52 bits)
         //cpu_ctrl_val[1:0];
         gen_clk(1);
         //cpu_ctrl_val[0]  <= #1 tdo; // cpu reset bit
         data[0]  <= #1 tdo; // cpu reset bit
         gen_clk(1);
         //cpu_ctrl_val[1]  <= #1 tdo; // cpu stall bit
         data[1]  <= #1 tdo; // cpu stall bit
 
         for(i=`DBG_CPU_DR_LEN - `DBG_CPU_CTRL_LEN -1; i>=0; i=i-1)  // unused control bits
           begin
              gen_clk(1);
           end
 
         for(i=`DBG_CPU_STATUS_LEN -1; i>=0; i=i-1)
           begin
              gen_clk(1);     // Generating clock to read out a status bit.
              status_cpu[i] = tdo;
           end
 
         if (|status_cpu)
           begin
              $write("(*E) (%0t) debug_cpu_wr_ctrl error: ", $time);
              casex (status_cpu)
                4'b1xxx : $display("CRC error !!!\n\n", $time);
                4'bx1xx : $display("??? error !!!\n\n", $time);
                4'bxx1x : $display("??? error !!!\n\n", $time);
                4'bxxx1 : $display("??? error !!!\n\n", $time);
              endcase // casex (status_cpu)
 
           end
 
 
         for(i=0; i<`DBG_CPU_CRC_LEN -1; i=i+1)  // Getting in the CRC
           begin
              gen_clk(1);
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to exit1_dr
 
         if (~crc_match_in)
           begin
              $display("(%0t) Incoming CRC failed !!!", $time);
 
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to update_dr
         tms<=#1 1'b0;
         gen_clk(1);         // to run_test_idle
      end
   endtask       // debug_cpu_rd_ctrl
 
 
   // 32-bit read from cpu
   task cpu_read_32;
      output [31:0] data;
      input [`DBG_WB_ADR_LEN -1:0] addr;
      input [`DBG_WB_LEN_LEN -1:0] length;
 
      reg [31:0]                    tmp;
 
      begin
         debug_cpu_wr_comm(`DBG_CPU_READ, addr, length, 1'b0);
 
         last_cpu_cmd = `DBG_CPU_READ;  last_cpu_cmd_text = "DBG_CPU_READ";
 
         length_global = length + 1;
 
         debug_cpu_go(1'b0, 1'b0);
 
         data = data_storage[0];
 
         if (length>3)
           $display("WARNING: Only first data word is returned( See module %m.)");
 
      end
   endtask
 
   // block of 32-bit reads from cpu
   task cpu_read_block;
      //output [31:0] data;
      input [`DBG_WB_ADR_LEN -1:0] addr;
      input [`DBG_WB_LEN_LEN -1:0] length;
 
      reg [31:0]                    tmp;
 
      begin
         debug_cpu_wr_comm(`DBG_CPU_READ, addr, length-1, 1'b0);
 
         last_cpu_cmd = `DBG_CPU_READ;  last_cpu_cmd_text = "DBG_CPU_READ";
 
         length_global = length;
 
         debug_cpu_go(1'b0, 1'b0);
 
         //data = data_storage[0];
 
         //if (length>3)
         //  $display("WARNING: Only first data word is returned( See module %m.)");
 
      end
   endtask
 
 
   // 32-bit write to cpu
   task cpu_write_32;
      input [31:0] data;
      input [`DBG_WB_ADR_LEN -1:0] addr;
      input [`DBG_WB_LEN_LEN -1:0] length;
 
      reg [31:0]                    tmp;
 
      begin
         debug_cpu_wr_comm(`DBG_CPU_WRITE, addr, length, 1'b0);
         last_cpu_cmd = `DBG_CPU_WRITE;  last_cpu_cmd_text = "DBG_CPU_WRITE";
         length_global = length + 1;
         data_storage[0] = data;
         debug_cpu_go(1'b0, 1'b0);
         if (length>3)
           $display("WARNING: Only first data word is stored for writting ( See module %m)");
      end
   endtask
 
   // block of 32-bit writes to cpu
   // Data will already be in data_storage
   task cpu_write_block;
      //input [31:0] data;
      input [`DBG_WB_ADR_LEN -1:0] addr;
      input [`DBG_WB_LEN_LEN -1:0] length;
 
      reg [31:0]                    tmp;
 
      begin
         debug_cpu_wr_comm(`DBG_CPU_WRITE, addr, length-1, 1'b0);
         last_cpu_cmd = `DBG_CPU_WRITE;  last_cpu_cmd_text = "DBG_CPU_WRITE";
         length_global = length;
         debug_cpu_go(1'b0, 1'b0);
      end
   endtask
 
 
   task debug_cpu_wr_comm;
      input [`DBG_CPU_ACC_TYPE_LEN -1:0]  acc_type;
      input [`DBG_CPU_ADR_LEN -1:0]        addr;
      input [`DBG_CPU_LEN_LEN -1:0]        length;
      input                               gen_crc_err;
      integer                             i;
      reg [`DBG_CPU_CMD_LEN -1:0]          command;
 
      begin
`ifdef DEBUG_INFO
         $display("(%0t) Task debug_cpu_wr_comm: ", $time);
`endif
 
         command = `DBG_CPU_WR_COMM;
         tms<=#1 1'b1;
         gen_clk(1);
         tms<=#1 1'b0;
         gen_clk(2);  // we are in shiftDR
 
         crc_out = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff
 
         tdi<=#1 1'b0; // module_select bit = 0
         calculate_crc(1'b0);
         gen_clk(1);
 
         for(i=`DBG_CPU_CMD_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 command[i]; // command
              calculate_crc(command[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_CPU_ACC_TYPE_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 acc_type[i]; // command
              calculate_crc(acc_type[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_CPU_ADR_LEN -1; i>=0; i=i-1)       // address
           begin
              tdi<=#1 addr[i];
              calculate_crc(addr[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_CPU_LEN_LEN -1; i>=0; i=i-1)       // length
           begin
              tdi<=#1 length[i];
              calculate_crc(length[i]);
              gen_clk(1);
           end
 
         for(i=`DBG_CPU_CRC_LEN -1; i>=0; i=i-1)
           begin
              if (gen_crc_err & (i==0))      // Generate crc error at last crc bit
                tdi<=#1 ~crc_out[i];   // error crc
              else
                tdi<=#1 crc_out[i];    // ok crc
 
              gen_clk(1);
           end
 
         tdi<=#1 1'hz;
 
         crc_in = {`DBG_CPU_CRC_LEN{1'b1}};  // Initialize incoming CRC to all ff
 
         for(i=`DBG_CPU_STATUS_LEN -1; i>=0; i=i-1)
           begin
              gen_clk(1);     // Generating clock to read out a status bit.
              status_cpu[i] = tdo;
           end
 
         if (|status_cpu)
           begin
              $write("(*E) (%0t) debug_cpu_wr_comm error: ", $time);
              casex (status_cpu)
                4'b1xxx : $display("CRC error !!!\n\n", $time);
                4'bx1xx : $display("Unknown command !!!\n\n", $time);
                4'bxx1x : $display("??? error !!!\n\n", $time);
                4'bxxx1 : $display("Overrun/Underrun !!!\n\n", $time);
              endcase
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
 
         for(i=0; i<`DBG_CPU_CRC_LEN -1; i=i+1)  // Getting in the CRC
           begin
              gen_clk(1);
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to exit1_dr
 
         if (~crc_match_in)
           begin
              $display("(%0t) Incoming CRC failed !!!", $time);
`ifdef DEBUG_INFO
              $stop;
`endif
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to update_dr
         tms<=#1 1'b0;
         gen_clk(1);         // to run_test_idle
      end
   endtask       // debug_cpu_wr_comm
 
 
 
   task debug_cpu_go;
      input         wait_for_cpu_ready;
      input         gen_crc_err;
      integer       i;
      reg [4:0]     bit_pointer;
      integer       word_pointer;
      reg [31:0]    tmp_data;
      reg [`DBG_CPU_CMD_LEN -1:0] command;
 
 
      begin
`ifdef DEBUG_INFO
         $display("(%0t) Task debug_cpu_go (previous command was %0s): ", $time, last_cpu_cmd_text);
`endif
         command = `DBG_CPU_GO;
         word_pointer = 0;
 
         tms<=#1 1'b1;
         gen_clk(1);
         tms<=#1 1'b0;
         gen_clk(2);  // we are in shiftDR
 
         crc_out = {`DBG_CPU_CRC_LEN{1'b1}}; // Initialize outgoing CRC to all ff
 
         tdi<=#1 1'b0; // module_select bit = 0
         calculate_crc(1'b0);
         gen_clk(1);
 
         for(i=`DBG_CPU_CMD_LEN -1; i>=0; i=i-1)
           begin
              tdi<=#1 command[i]; // command
              calculate_crc(command[i]);
              gen_clk(1);
           end
 
 
         if (last_cpu_cmd == `DBG_CPU_WRITE)  // When DBG_CPU_WRITE was previously activated, data needs to be shifted.
           begin
              for (i=0; i<((length_global) << 3); i=i+1)
                begin
                   tmp_data = data_storage[word_pointer];
                   if ((!(i%32)) && (i>0))
                     begin
                        word_pointer = word_pointer + 1;
                     end
                   bit_pointer = 31-i[4:0];
                   tdi<=#1 tmp_data[bit_pointer];
                   calculate_crc(tmp_data[bit_pointer]);
                   gen_clk(1);
 
                end
           end
 
         for(i=`DBG_CPU_CRC_LEN -1; i>=1; i=i-1)
           begin
              tdi<=#1 crc_out[i];
              gen_clk(1);
           end
 
         if (gen_crc_err)  // Generate crc error at last crc bit
           tdi<=#1 ~crc_out[0];   // error crc
         else
           tdi<=#1 crc_out[0];    // ok crc
 
         if (wait_for_cpu_ready)
           begin
              tms<=#1 1'b1;
              gen_clk(1);       // to exit1_dr. Last CRC is shifted on this clk
              tms<=#1 1'b0;
              gen_clk(1);       // to pause_dr
 
              #2;             // wait a bit for tdo to activate
              while (tdo)     // waiting for wb to send "ready"
                begin
                   gen_clk(1);       // staying in pause_dr
                end
 
              tms<=#1 1'b1;
              gen_clk(1);       // to exit2_dr
              tms<=#1 1'b0;
              gen_clk(1);       // to shift_dr
           end
         else
           begin
              gen_clk(1);       // Last CRC is shifted on this clk
           end
 
 
         tdi<=#1 1'hz;
         crc_in = {`DBG_CPU_CRC_LEN{1'b1}};  // Initialize incoming CRC to all ff
 
         if (last_cpu_cmd == `DBG_CPU_READ)  // When DBG_CPU_READ was previously activated, data needs to be shifted.
           begin
`ifdef DEBUG_INFO
              $display("\t\tGenerating %0d clocks to read %0d data bytes.", length_global<<3, length_global);
`endif
              word_pointer = 0; // Reset pointer
              for (i=0; i<(length_global<<3); i=i+1)
                begin
 
                   gen_clk(1);
 
                   if (i[4:0] == 31)   // Latching data
                     begin
                        data_storage[word_pointer] = in_data_be;
`ifdef DEBUG_INFO
                        $display("\t\tin_data_be = 0x%x", in_data_be);
`endif
                        word_pointer = word_pointer + 1;
                     end
 
                end
           end
 
 
         for(i=`DBG_CPU_STATUS_LEN -1; i>=0; i=i-1)
           begin
              gen_clk(1);     // Generating clock to read out a status bit.
              status_cpu[i] = tdo;
           end
 
         if (|status_cpu)
           begin
              $write("(*E) (%0t) debug_cpu_go error: ", $time);
              casex (status_cpu)
                4'b1xxx : $display("CRC error !!!\n\n", $time);
                4'bx1xx : $display("Unknown command !!!\n\n", $time);
                4'bxx1x : $display("??? error !!!\n\n", $time);
                4'bxxx1 : $display("Overrun/Underrun !!!\n\n", $time);
              endcase
              $stop;
           end
 
 
         for(i=0; i<`DBG_CPU_CRC_LEN -1; i=i+1)  // Getting in the CRC
           begin
              gen_clk(1);
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to exit1_dr
 
         if (~crc_match_in)
           begin
              $display("(%0t) Incoming CRC failed !!!", $time);
              $stop;
           end
 
         tms<=#1 1'b1;
         gen_clk(1);         // to update_dr
         tms<=#1 1'b0;
         gen_clk(1);         // to run_test_idle
      end
   endtask       // debug_cpu_go
 
 
 
 
   // Calculating outgoing CRC
   task calculate_crc;
      input data;
 
      begin
         crc_out[0]  <= #1 data          ^ crc_out[31];
         crc_out[1]  <= #1 data          ^ crc_out[0]  ^ crc_out[31];
         crc_out[2]  <= #1 data          ^ crc_out[1]  ^ crc_out[31];
         crc_out[3]  <= #1 crc_out[2];
         crc_out[4]  <= #1 data          ^ crc_out[3]  ^ crc_out[31];
         crc_out[5]  <= #1 data          ^ crc_out[4]  ^ crc_out[31];
         crc_out[6]  <= #1 crc_out[5];
         crc_out[7]  <= #1 data          ^ crc_out[6]  ^ crc_out[31];
         crc_out[8]  <= #1 data          ^ crc_out[7]  ^ crc_out[31];
         crc_out[9]  <= #1 crc_out[8];
         crc_out[10] <= #1 data         ^ crc_out[9]  ^ crc_out[31];
         crc_out[11] <= #1 data         ^ crc_out[10] ^ crc_out[31];
         crc_out[12] <= #1 data         ^ crc_out[11] ^ crc_out[31];
         crc_out[13] <= #1 crc_out[12];
         crc_out[14] <= #1 crc_out[13];
         crc_out[15] <= #1 crc_out[14];
         crc_out[16] <= #1 data         ^ crc_out[15] ^ crc_out[31];
         crc_out[17] <= #1 crc_out[16];
         crc_out[18] <= #1 crc_out[17];
         crc_out[19] <= #1 crc_out[18];
         crc_out[20] <= #1 crc_out[19];
         crc_out[21] <= #1 crc_out[20];
         crc_out[22] <= #1 data         ^ crc_out[21] ^ crc_out[31];
         crc_out[23] <= #1 data         ^ crc_out[22] ^ crc_out[31];
         crc_out[24] <= #1 crc_out[23];
         crc_out[25] <= #1 crc_out[24];
         crc_out[26] <= #1 data         ^ crc_out[25] ^ crc_out[31];
         crc_out[27] <= #1 crc_out[26];
         crc_out[28] <= #1 crc_out[27];
         crc_out[29] <= #1 crc_out[28];
         crc_out[30] <= #1 crc_out[29];
         crc_out[31] <= #1 crc_out[30];
      end
   endtask // calculate_crc
 
 
   // Calculating and checking input CRC
   always @(posedge tck)
     begin
        crc_in[0]  <= #1 tdo           ^ crc_in[31];
        crc_in[1]  <= #1 tdo           ^ crc_in[0]  ^ crc_in[31];
        crc_in[2]  <= #1 tdo           ^ crc_in[1]  ^ crc_in[31];
        crc_in[3]  <= #1 crc_in[2];
        crc_in[4]  <= #1 tdo           ^ crc_in[3]  ^ crc_in[31];
        crc_in[5]  <= #1 tdo           ^ crc_in[4]  ^ crc_in[31];
        crc_in[6]  <= #1 crc_in[5];
        crc_in[7]  <= #1 tdo           ^ crc_in[6]  ^ crc_in[31];
        crc_in[8]  <= #1 tdo           ^ crc_in[7]  ^ crc_in[31];
        crc_in[9]  <= #1 crc_in[8];
        crc_in[10] <= #1 tdo          ^ crc_in[9]  ^ crc_in[31];
        crc_in[11] <= #1 tdo          ^ crc_in[10] ^ crc_in[31];
        crc_in[12] <= #1 tdo          ^ crc_in[11] ^ crc_in[31];
        crc_in[13] <= #1 crc_in[12];
        crc_in[14] <= #1 crc_in[13];
        crc_in[15] <= #1 crc_in[14];
        crc_in[16] <= #1 tdo          ^ crc_in[15] ^ crc_in[31];
        crc_in[17] <= #1 crc_in[16];
        crc_in[18] <= #1 crc_in[17];
        crc_in[19] <= #1 crc_in[18];
        crc_in[20] <= #1 crc_in[19];
        crc_in[21] <= #1 crc_in[20];
        crc_in[22] <= #1 tdo          ^ crc_in[21] ^ crc_in[31];
        crc_in[23] <= #1 tdo          ^ crc_in[22] ^ crc_in[31];
        crc_in[24] <= #1 crc_in[23];
        crc_in[25] <= #1 crc_in[24];
        crc_in[26] <= #1 tdo          ^ crc_in[25] ^ crc_in[31];
        crc_in[27] <= #1 crc_in[26];
        crc_in[28] <= #1 crc_in[27];
        crc_in[29] <= #1 crc_in[28];
        crc_in[30] <= #1 crc_in[29];
        crc_in[31] <= #1 crc_in[30];
     end
 
   assign crc_match_in = crc_in == 32'h0;
 
 
endmodule // vpi_debug_module
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [bench/] [verilog/] [vpi/] [verilog/] [vpi_debug_module.v] - Blame information for rev 811

Line No.	Rev	Author	Line
1	40	julius	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// ORPSoC Testbench ////`
4			`//// ////`
5			`//// Description ////`
6			`//// ORPSoC VPI Debugging Testbench file ////`
7			`//// ////`
8			`//// To Do: ////`
9			`//// ////`
10			`//// ////`
11			`//// Author(s): ////`
12			`//// - jb, jb@orsoc.se ////`
13			`//// ////`
14			`//// ////`
15			`//////////////////////////////////////////////////////////////////////`
16			`//// ////`
17			`//// Copyright (C) 2009 Authors and OPENCORES.ORG ////`
18			`//// ////`
19			`//// This source file may be used and distributed without ////`
20			`//// restriction provided that this copyright statement is not ////`
21			`//// removed from the file and that any derivative work contains ////`
22			`//// the original copyright notice and the associated disclaimer. ////`
23			`//// ////`
24			`//// This source file is free software; you can redistribute it ////`
25			`//// and/or modify it under the terms of the GNU Lesser General ////`
26			`//// Public License as published by the Free Software Foundation; ////`
27			`//// either version 2.1 of the License, or (at your option) any ////`
28			`//// later version. ////`
29			`//// ////`
30			`//// This source is distributed in the hope that it will be ////`
31			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
32			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
33			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
34			`//// details. ////`
35			`//// ////`
36			`//// You should have received a copy of the GNU Lesser General ////`
37			`//// Public License along with this source; if not, download it ////`
38			`//// from http://www.opencores.org/lgpl.shtml ////`
39			`//// ////`
40			`//////////////////////////////////////////////////////////////////////`