Subversion Repositories openrisc

/*

 *

 * Clock, reset generation unit for ML501 board

 *

 * Implements clock generation according to design defines

 *

 */

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2009, 2010 Authors and OPENCORES.ORG           ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

`include "orpsoc-defines.v"

`include "synthesis-defines.v"

module clkgen

  (

   // Main clocks in, depending on board

   sys_clk_in_p, sys_clk_in_n,

   // Wishbone clock and reset out  

   wb_clk_o,

   wb_rst_o,

   // JTAG clock

`ifdef JTAG_DEBUG

   tck_pad_i,

   dbg_tck_o,

`endif

   // Main memory clocks

`ifdef XILINX_DDR2

   ddr2_if_clk_o,

   ddr2_if_rst_o,

   clk200_o,

`endif

   // Asynchronous, active low reset in

   rst_n_pad_i

   );

   input  sys_clk_in_p,sys_clk_in_n;

   output wb_rst_o;

   output wb_clk_o;

`ifdef JTAG_DEBUG

   input  tck_pad_i;

   output dbg_tck_o;

`endif

`ifdef XILINX_DDR2

   output ddr2_if_clk_o;

   output ddr2_if_rst_o;

   output clk200_o;

`endif

   // Asynchronous, active low reset (pushbutton, typically)

   input  rst_n_pad_i;

   // First, deal with the asychronous reset

   wire   async_rst;

   wire   async_rst_n;

   // Xilinx synthesis tools appear cluey enough to instantiate buffers when and

   // where they're needed, so we do simple assigns for this tech.

   assign async_rst_n = rst_n_pad_i;

   // Everyone likes active-high reset signals...

   assign async_rst = ~async_rst_n;

`ifdef JTAG_DEBUG

   assign dbg_tck_o = tck_pad_i;

`endif

   //

   // Declare synchronous reset wires here

   //

   // An active-low synchronous reset signal (usually a PLL lock signal)

   wire   sync_rst_n;

   // An active-low synchronous reset from ethernet PLL

   wire   sync_eth_rst_n;

   wire       sys_clk_in_200;

   /* DCM0 wires */

   wire            dcm0_clk0_prebufg, dcm0_clk0;

   wire            dcm0_clkfx_prebufg, dcm0_clkfx;

   wire            dcm0_clkdv_prebufg, dcm0_clkdv;

   wire            dcm0_locked;

   /* Dif. input buffer for 200MHz board clock, generate SE 200MHz */

   IBUFGDS_LVPECL_25 sys_clk_in_ibufds

     (

      .O(sys_clk_in_200),

      .I(sys_clk_in_p),

      .IB(sys_clk_in_n));

   /* DCM providing main system/Wishbone clock */

   DCM_BASE dcm0

     (

      // Outputs

      .CLK0                              (dcm0_clk0_prebufg),

      .CLK180                            (),

      .CLK270                            (),

      .CLK2X180                          (),

      .CLK2X                             (),

      .CLK90                             (),

      .CLKDV                             (dcm0_clkdv_prebufg),

      .CLKFX180                          (),

      .CLKFX                             (dcm0_clkfx_prebufg),

      .LOCKED                            (dcm0_locked),

      // Inputs

      .CLKFB                             (dcm0_clk0),

      .CLKIN                             (sys_clk_in_200),

      .RST                               (1'b0));

   // Generate 266 MHz from CLKFX

   defparam    dcm0.CLKFX_MULTIPLY    = 4;

   defparam    dcm0.CLKFX_DIVIDE      = 3;

   // Generate 50 MHz from CLKDV

   defparam    dcm0.CLKDV_DIVIDE      = 4.0;

   BUFG dcm0_clk0_bufg

     (// Outputs

      .O                                 (dcm0_clk0),

      // Inputs

      .I                                 (dcm0_clk0_prebufg));

   BUFG dcm0_clkfx_bufg

     (// Outputs

      .O                                 (dcm0_clkfx),

      // Inputs

      .I                                 (dcm0_clkfx_prebufg));

   BUFG dcm0_clkdv_bufg

     (// Outputs

      .O                                 (dcm0_clkdv),

      // Inputs

      .I                                 (dcm0_clkdv_prebufg));

   assign wb_clk_o = dcm0_clkdv;

   assign sync_rst_n = dcm0_locked;

 `ifdef XILINX_DDR2

   assign ddr2_if_clk_o = dcm0_clkfx; // 266MHz    

   assign clk200_o = dcm0_clk0; // 200MHz

 `endif

   //

   // Reset generation

   //

   //

   // Reset generation for wishbone

   reg [15:0]       wb_rst_shr;

   always @(posedge wb_clk_o or posedge async_rst)

     if (async_rst)

       wb_rst_shr <= 16'hffff;

     else

       wb_rst_shr <= {wb_rst_shr[14:0], ~(sync_rst_n)};

   assign wb_rst_o = wb_rst_shr[15];

`ifdef XILINX_DDR2

   // Reset generation for DDR2 controller

   reg [15:0]       ddr2_if_rst_shr;

   always @(posedge ddr2_if_clk_o or posedge async_rst)

     if (async_rst)

       ddr2_if_rst_shr <= 16'hffff;

     else

       ddr2_if_rst_shr <= {ddr2_if_rst_shr[14:0], ~(sync_rst_n)};

   assign ddr2_if_rst_o = ddr2_if_rst_shr[15];

`endif

endmodule // clkgen