Subversion Repositories openrisc_2011-10-31

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  uart_defines.v                                              ////

////                                                              ////

////                                                              ////

////  This file is part of the "UART 16550 compatible" project    ////

////  http://www.opencores.org/cores/uart16550/                   ////

////                                                              ////

////  Documentation related to this project:                      ////

////  - http://www.opencores.org/cores/uart16550/                 ////

////                                                              ////

////  Projects compatibility:                                     ////

////  - WISHBONE                                                  ////

////  RS232 Protocol                                              ////

////  16550D uart (mostly supported)                              ////

////                                                              ////

////  Overview (main Features):                                   ////

////  Defines of the Core                                         ////

////                                                              ////

////  Known problems (limits):                                    ////

////  None                                                        ////

////                                                              ////

////  To Do:                                                      ////

////  Nothing.                                                    ////

////                                                              ////

////  Author(s):                                                  ////

////      - gorban@opencores.org                                  ////

////      - Jacob Gorban                                          ////

////      - Igor Mohor (igorm@opencores.org)                      ////

////                                                              ////

////  Created:        2001/05/12                                  ////

////  Last Updated:   2001/05/17                                  ////

////                  (See log for the revision history)          ////

////                                                              ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2000, 2001 Authors                             ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.13  2003/06/11 16:37:47  gorban

// This fixes errors in some cases when data is being read and put to the FIFO at the same time. Patch is submitted by Scott Furman. Update is very recommended.

//

// Revision 1.12  2002/07/22 23:02:23  gorban

// Bug Fixes:

//  * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.

//   Problem reported by Kenny.Tung.

//  * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.

//

// Improvements:

//  * Made FIFO's as general inferrable memory where possible.

//  So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).

//  This saves about 1/3 of the Slice count and reduces P&R and synthesis times.

//

//  * Added optional baudrate output (baud_o).

//  This is identical to BAUDOUT* signal on 16550 chip.

//  It outputs 16xbit_clock_rate - the divided clock.

//  It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.

//

// Revision 1.10  2001/12/11 08:55:40  mohor

// Scratch register define added.

//

// Revision 1.9  2001/12/03 21:44:29  gorban

// Updated specification documentation.

// Added full 32-bit data bus interface, now as default.

// Address is 5-bit wide in 32-bit data bus mode.

// Added wb_sel_i input to the core. It's used in the 32-bit mode.

// Added debug interface with two 32-bit read-only registers in 32-bit mode.

// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.

// My small test bench is modified to work with 32-bit mode.

//

// Revision 1.8  2001/11/26 21:38:54  gorban

// Lots of fixes:

// Break condition wasn't handled correctly at all.

// LSR bits could lose their values.

// LSR value after reset was wrong.

// Timing of THRE interrupt signal corrected.

// LSR bit 0 timing corrected.

//

// Revision 1.7  2001/08/24 21:01:12  mohor

// Things connected to parity changed.

// Clock devider changed.

//

// Revision 1.6  2001/08/23 16:05:05  mohor

// Stop bit bug fixed.

// Parity bug fixed.

// WISHBONE read cycle bug fixed,

// OE indicator (Overrun Error) bug fixed.

// PE indicator (Parity Error) bug fixed.

// Register read bug fixed.

//

// Revision 1.5  2001/05/31 20:08:01  gorban

// FIFO changes and other corrections.

//

// Revision 1.4  2001/05/21 19:12:02  gorban

// Corrected some Linter messages.

//

// Revision 1.3  2001/05/17 18:34:18  gorban

// First 'stable' release. Should be sythesizable now. Also added new header.

//

// Revision 1.0  2001-05-17 21:27:11+02  jacob

// Initial revision

//

//

// remove comments to restore to use the new version with 8 data bit interface

// in 32bit-bus mode, the wb_sel_i signal is used to put data in correct place

// also, in 8-bit version there'll be no debugging features included

// CAUTION: doesn't work with current version of OR1200

`define DATA_BUS_WIDTH_8

`ifdef DATA_BUS_WIDTH_8

 `define UART_ADDR_WIDTH 3

 `define UART_DATA_WIDTH 8

`else

 `define UART_ADDR_WIDTH 5

 `define UART_DATA_WIDTH 32

`endif

// Uncomment this if you want your UART to have

// 16xBaudrate output port.

// If defined, the enable signal will be used to drive baudrate_o signal

// It's frequency is 16xbaudrate

// `define UART_HAS_BAUDRATE_OUTPUT

// Register addresses

`define UART_REG_RB     `UART_ADDR_WIDTH'd0     // receiver buffer

`define UART_REG_TR  `UART_ADDR_WIDTH'd0        // transmitter

`define UART_REG_IE     `UART_ADDR_WIDTH'd1     // Interrupt enable

`define UART_REG_II  `UART_ADDR_WIDTH'd2        // Interrupt identification

`define UART_REG_FC  `UART_ADDR_WIDTH'd2        // FIFO control

`define UART_REG_LC     `UART_ADDR_WIDTH'd3     // Line Control

`define UART_REG_MC     `UART_ADDR_WIDTH'd4     // Modem control

`define UART_REG_LS  `UART_ADDR_WIDTH'd5        // Line status

`define UART_REG_MS  `UART_ADDR_WIDTH'd6        // Modem status

`define UART_REG_SR  `UART_ADDR_WIDTH'd7        // Scratch register

`define UART_REG_DL1    `UART_ADDR_WIDTH'd0     // Divisor latch bytes (1-2)

`define UART_REG_DL2    `UART_ADDR_WIDTH'd1

// Interrupt Enable register bits

`define UART_IE_RDA     0        // Received Data available interrupt

`define UART_IE_THRE    1       // Transmitter Holding Register empty interrupt

`define UART_IE_RLS     2       // Receiver Line Status Interrupt

`define UART_IE_MS      3       // Modem Status Interrupt

// Interrupt Identification register bits

`define UART_II_IP      0        // Interrupt pending when 0

`define UART_II_II      3:1     // Interrupt identification

// Interrupt identification values for bits 3:1

`define UART_II_RLS     3'b011  // Receiver Line Status

`define UART_II_RDA     3'b010  // Receiver Data available

`define UART_II_TI      3'b110  // Timeout Indication

`define UART_II_THRE    3'b001  // Transmitter Holding Register empty

`define UART_II_MS      3'b000  // Modem Status

// FIFO Control Register bits

`define UART_FC_TL      1:0      // Trigger level

// FIFO trigger level values

`define UART_FC_1               2'b00

`define UART_FC_4               2'b01

`define UART_FC_8               2'b10

`define UART_FC_14      2'b11

// Line Control register bits

`define UART_LC_BITS    1:0      // bits in character

`define UART_LC_SB      2       // stop bits

`define UART_LC_PE      3       // parity enable

`define UART_LC_EP      4       // even parity

`define UART_LC_SP      5       // stick parity

`define UART_LC_BC      6       // Break control

`define UART_LC_DL      7       // Divisor Latch access bit

// Modem Control register bits

`define UART_MC_DTR     0

`define UART_MC_RTS     1

`define UART_MC_OUT1    2

`define UART_MC_OUT2    3

`define UART_MC_LB      4       // Loopback mode

// Line Status Register bits

`define UART_LS_DR      0        // Data ready

`define UART_LS_OE      1       // Overrun Error

`define UART_LS_PE      2       // Parity Error

`define UART_LS_FE      3       // Framing Error

`define UART_LS_BI      4       // Break interrupt

`define UART_LS_TFE     5       // Transmit FIFO is empty

`define UART_LS_TE      6       // Transmitter Empty indicator

`define UART_LS_EI      7       // Error indicator

// Modem Status Register bits

`define UART_MS_DCTS    0        // Delta signals

`define UART_MS_DDSR    1

`define UART_MS_TERI    2

`define UART_MS_DDCD    3

`define UART_MS_CCTS    4       // Complement signals

`define UART_MS_CDSR    5

`define UART_MS_CRI     6

`define UART_MS_CDCD    7

// FIFO parameter defines

`define UART_FIFO_WIDTH 8

`define UART_FIFO_DEPTH 16

`define UART_FIFO_POINTER_W     4

`define UART_FIFO_COUNTER_W     5

// receiver fifo has width 11 because it has break, parity and framing error bits

`define UART_FIFO_REC_WIDTH  11

`define VERBOSE_WB  0           // All activity on the WISHBONE is recorded

`define VERBOSE_LINE_STATUS 0   // Details about the lsr (line status register)

`define FAST_TEST   1           // 64/1024 packets are sent

// Defines hard baud prescaler register - uncomment to enable

//`define PRESCALER_PRESET_HARD

// 115200 baud preset values

// 20MHz: prescaler 10.8 (11, rounded up)

//`define PRESCALER_HIGH_PRESET 8'd0

//`define PRESCALER_LOW_PRESET 8'd11

// 50MHz: prescaler 27.1

//`define PRESCALER_HIGH_PRESET 8'd0

//`define PRESCALER_LOW_PRESET 8'd27

// 66MHz: prescaler 36.1

//`define PRESCALER_HIGH_PRESET 8'd0

//`define PRESCALER_LOW_PRESET 8'd36