Subversion Repositories openrisc

//*****************************************************************************

// DISCLAIMER OF LIABILITY

//

// This file contains proprietary and confidential information of

// Xilinx, Inc. ("Xilinx"), that is distributed under a license

// from Xilinx, and may be used, copied and/or disclosed only

// pursuant to the terms of a valid license agreement with Xilinx.

//

// XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION

// ("MATERIALS") "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER

// EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING WITHOUT

// LIMITATION, ANY WARRANTY WITH RESPECT TO NONINFRINGEMENT,

// MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Xilinx

// does not warrant that functions included in the Materials will

// meet the requirements of Licensee, or that the operation of the

// Materials will be uninterrupted or error-free, or that defects

// in the Materials will be corrected. Furthermore, Xilinx does

// not warrant or make any representations regarding use, or the

// results of the use, of the Materials in terms of correctness,

// accuracy, reliability or otherwise.

//

// Xilinx products are not designed or intended to be fail-safe,

// or for use in any application requiring fail-safe performance,

// such as life-support or safety devices or systems, Class III

// medical devices, nuclear facilities, applications related to

// the deployment of airbags, or any other applications that could

// lead to death, personal injury or severe property or

// environmental damage (individually and collectively, "critical

// applications"). Customer assumes the sole risk and liability

// of any use of Xilinx products in critical applications,

// subject only to applicable laws and regulations governing

// limitations on product liability.

//

// Copyright 2006, 2007, 2008 Xilinx, Inc.

// All rights reserved.

//

// This disclaimer and copyright notice must be retained as part

// of this file at all times.

//*****************************************************************************

//   ____  ____

//  /   /\/   /

// /___/  \  /    Vendor: Xilinx

// \   \   \/     Version: 3.0

//  \   \         Application: MIG

//  /   /         Filename: ddr2_mig.v

// /___/   /\     Date Last Modified: $Date: 2009/02/03 18:46:29 $

// \   \  /  \    Date Created: Wed Aug 16 2006

//  \___\/\___\

//

//Device: Virtex-5

//Design Name: DDR2

//Purpose:

//   Top-level  module. Simple model for what the user might use

//   Typically, the user will only instantiate MEM_INTERFACE_TOP in their

//   code, and generate all backend logic (test bench) separately.

//   In addition to the memory controller, the module instantiates:

//     1. Clock generation/distribution, reset logic

//     2. IDELAY control block

//Reference:

//Revision History:

//   Rev 1.1 - Parameter USE_DM_PORT added. PK. 6/25/08

//   Rev 1.2 - Parameter HIGH_PERFORMANCE_MODE added. PK. 7/10/08

//   Rev 1.3 - Parameter IODELAY_GRP added. PK. 11/27/08

//*****************************************************************************

`timescale 1ns/1ps

(* X_CORE_INFO = "mig_v3_0_ddr2_v5, Coregen 11.1" , CORE_GENERATION_INFO = "ddr2_v5,mig_v3_0,{component_name=ddr2_mig, BANK_WIDTH=2, CKE_WIDTH=1, CLK_WIDTH=2, COL_WIDTH=10, CS_NUM=1, CS_WIDTH=1, DM_WIDTH=8, DQ_WIDTH=64, DQ_PER_DQS=8, DQS_WIDTH=8, ODT_WIDTH=1, ROW_WIDTH=13, ADDITIVE_LAT=0, BURST_LEN=4, BURST_TYPE=0, CAS_LAT=4, ECC_ENABLE=0, MULTI_BANK_EN=1, TWO_T_TIME_EN=1, ODT_TYPE=1, REDUCE_DRV=0, REG_ENABLE=0, TREFI_NS=7800, TRAS=40000, TRCD=15000, TRFC=105000, TRP=15000, TRTP=7500, TWR=15000, TWTR=7500, DDR2_CLK_PERIOD=3750, RST_ACT_LOW=1}" *)

module ddr2_mig #

  (

   parameter BANK_WIDTH              = 2,

                                       // # of memory bank addr bits.

   parameter CKE_WIDTH               = 1,

                                       // # of memory clock enable outputs.

   parameter CLK_WIDTH               = 2,

                                       // # of clock outputs.

   parameter COL_WIDTH               = 10,

                                       // # of memory column bits.

   parameter CS_NUM                  = 1,

                                       // # of separate memory chip selects.

   parameter CS_WIDTH                = 1,

                                       // # of total memory chip selects.

   parameter CS_BITS                 = 0,

                                       // set to log2(CS_NUM) (rounded up).

   parameter DM_WIDTH                = 8,

                                       // # of data mask bits.

   parameter DQ_WIDTH                = 64,

                                       // # of data width.

   parameter DQ_PER_DQS              = 8,

                                       // # of DQ data bits per strobe.

   parameter DQS_WIDTH               = 8,

                                       // # of DQS strobes.

   parameter DQ_BITS                 = 6,

                                       // set to log2(DQS_WIDTH*DQ_PER_DQS).

   parameter DQS_BITS                = 3,

                                       // set to log2(DQS_WIDTH).

   parameter ODT_WIDTH               = 1,

                                       // # of memory on-die term enables.

   parameter ROW_WIDTH               = 13,

                                       // # of memory row and # of addr bits.

   parameter ADDITIVE_LAT            = 0,

                                       // additive write latency.

   parameter BURST_LEN               = 4,

                                       // burst length (in double words).

   parameter BURST_TYPE              = 0,

                                       // burst type (=0 seq; =1 interleaved).

   parameter CAS_LAT                 = 4,

                                       // CAS latency.

   parameter ECC_ENABLE              = 0,

                                       // enable ECC (=1 enable).

   parameter APPDATA_WIDTH           = 128,

                                       // # of usr read/write data bus bits.

   parameter MULTI_BANK_EN           = 1,

                                       // Keeps multiple banks open. (= 1 enable).

   parameter TWO_T_TIME_EN           = 1,

                                       // 2t timing for unbuffered dimms.

   parameter ODT_TYPE                = 1,

                                       // ODT (=0(none),=1(75),=2(150),=3(50)).

   parameter REDUCE_DRV              = 0,

                                       // reduced strength mem I/O (=1 yes).

   parameter REG_ENABLE              = 0,

                                       // registered addr/ctrl (=1 yes).

   parameter TREFI_NS                = 7800,

                                       // auto refresh interval (ns).

   parameter TRAS                    = 40000,

                                       // active->precharge delay.

   parameter TRCD                    = 15000,

                                       // active->read/write delay.

   parameter TRFC                    = 105000,

                                       // refresh->refresh, refresh->active delay.

   parameter TRP                     = 15000,

                                       // precharge->command delay.

   parameter TRTP                    = 7500,

                                       // read->precharge delay.

   parameter TWR                     = 15000,

                                       // used to determine write->precharge.

   parameter TWTR                    = 7500,

                                       // write->read delay.

   parameter HIGH_PERFORMANCE_MODE   = "TRUE",

                              // # = TRUE, the IODELAY performance mode is set

                              // to high.

                              // # = FALSE, the IODELAY performance mode is set

                              // to low.

   parameter SIM_ONLY                = 0,

                                       // = 1 to skip SDRAM power up delay.

   parameter DEBUG_EN                = 0,

                                       // Enable debug signals/controls.

                                       // When this parameter is changed from 0 to 1,

                                       // make sure to uncomment the coregen commands

                                       // in ise_flow.bat or create_ise.bat files in

                                       // par folder.

   parameter CLK_PERIOD              = 3750,

                                       // Core/Memory clock period (in ps).

   parameter CLK_TYPE                = "SINGLE_ENDED",

                                       // # = "DIFFERENTIAL " ->; Differential input clocks ,

                                       // # = "SINGLE_ENDED" -> Single ended input clocks.

   parameter DLL_FREQ_MODE           = "HIGH",

                                       // DCM Frequency range.

   parameter RST_ACT_LOW             = 1

                                       // =1 for active low reset, =0 for active high.

   )

  (

   inout  [DQ_WIDTH-1:0]              ddr2_dq,

   output [ROW_WIDTH-1:0]             ddr2_a,

   output [BANK_WIDTH-1:0]            ddr2_ba,

   output                             ddr2_ras_n,

   output                             ddr2_cas_n,

   output                             ddr2_we_n,

   output [CS_WIDTH-1:0]              ddr2_cs_n,

   output [ODT_WIDTH-1:0]             ddr2_odt,

   output [CKE_WIDTH-1:0]             ddr2_cke,

   output [DM_WIDTH-1:0]              ddr2_dm,

   input                              sys_clk,

   input                              idly_clk_200,

   input                              sys_rst_n,

   output                             phy_init_done,

   output                             rst0_tb,

   output                             clk0_tb,

   input usr_clk, // jb

   output                             app_wdf_afull,

   output                             app_af_afull,

   output                             rd_data_valid,

   input                              app_wdf_wren,

   input                              app_af_wren,

   input  [30:0]                      app_af_addr,

   input  [2:0]                       app_af_cmd,

   output [(APPDATA_WIDTH)-1:0]                rd_data_fifo_out,

   input  [(APPDATA_WIDTH)-1:0]                app_wdf_data,

   input  [(APPDATA_WIDTH/8)-1:0]              app_wdf_mask_data,

   inout  [DQS_WIDTH-1:0]             ddr2_dqs,

   inout  [DQS_WIDTH-1:0]             ddr2_dqs_n,

   output [CLK_WIDTH-1:0]             ddr2_ck,

   output [CLK_WIDTH-1:0]             ddr2_ck_n

   );

  //***************************************************************************

  // IODELAY Group Name: Replication and placement of IDELAYCTRLs will be

  // handled automatically by software tools if IDELAYCTRLs have same refclk,

  // reset and rdy nets. Designs with a unique RESET will commonly create a

  // unique RDY. Constraint IODELAY_GROUP is associated to a set of IODELAYs

  // with an IDELAYCTRL. The parameter IODELAY_GRP value can be any string.

  //***************************************************************************

  localparam IODELAY_GRP = "IODELAY_MIG";

   initial

     $display("Xilinx DDR2 MIGed controller at %m\n");

  wire                              sys_clk_p;

  wire                              sys_clk_n;

  wire                              clk200_p;

  wire                              clk200_n;

  wire                              rst0;

  wire                              rst90;

  wire                              rstdiv0;

  wire                              rst200;

  wire                              clk0;

  wire                              clk90;

  wire                              clkdiv0;

  wire                              clk200;

  wire                              idelay_ctrl_rdy;

  //Debug signals

  wire [3:0]                        dbg_calib_done;

  wire [3:0]                        dbg_calib_err;

  wire [(6*DQ_WIDTH)-1:0]           dbg_calib_dq_tap_cnt;

  wire [(6*DQS_WIDTH)-1:0]          dbg_calib_dqs_tap_cnt;

  wire [(6*DQS_WIDTH)-1:0]          dbg_calib_gate_tap_cnt;

  wire [DQS_WIDTH-1:0]              dbg_calib_rd_data_sel;

  wire [(5*DQS_WIDTH)-1:0]          dbg_calib_rden_dly;

  wire [(5*DQS_WIDTH)-1:0]          dbg_calib_gate_dly;

  wire                              dbg_idel_up_all;

  wire                              dbg_idel_down_all;

  wire                              dbg_idel_up_dq;

  wire                              dbg_idel_down_dq;

  wire                              dbg_idel_up_dqs;

  wire                              dbg_idel_down_dqs;

  wire                              dbg_idel_up_gate;

  wire                              dbg_idel_down_gate;

  wire [DQ_BITS-1:0]                dbg_sel_idel_dq;

  wire                              dbg_sel_all_idel_dq;

  wire [DQS_BITS:0]                 dbg_sel_idel_dqs;

  wire                              dbg_sel_all_idel_dqs;

  wire [DQS_BITS:0]                 dbg_sel_idel_gate;

  wire                              dbg_sel_all_idel_gate;

    // Debug signals (optional use)

  //***********************************

  // PHY Debug Port demo

  //***********************************

  wire [35:0]                        cs_control0;

  wire [35:0]                        cs_control1;

  wire [35:0]                        cs_control2;

  wire [35:0]                        cs_control3;

  wire [191:0]                       vio0_in;

  wire [95:0]                        vio1_in;

  wire [99:0]                        vio2_in;

  wire [31:0]                        vio3_out;

  //***************************************************************************

  assign  rst0_tb = rst0;

  assign  clk0_tb = clk0;

  assign sys_clk_p = 1'b1;

  assign sys_clk_n = 1'b0;

  assign clk200_p = 1'b1;

  assign clk200_n = 1'b0;

   ddr2_idelay_ctrl #

   (

    .IODELAY_GRP         (IODELAY_GRP)

   )

   u_ddr2_idelay_ctrl

   (

   .rst200                 (rst200),

   .clk200                 (clk200),

   .idelay_ctrl_rdy        (idelay_ctrl_rdy)

   );

 ddr2_infrastructure #

 (

   .CLK_PERIOD             (CLK_PERIOD),

   .CLK_TYPE               (CLK_TYPE),

   .DLL_FREQ_MODE          (DLL_FREQ_MODE),

   .RST_ACT_LOW            (RST_ACT_LOW)

   )

u_ddr2_infrastructure

 (

   .sys_clk_p              (sys_clk_p),

   .sys_clk_n              (sys_clk_n),

   .sys_clk                (sys_clk),

   .clk200_p               (clk200_p),

   .clk200_n               (clk200_n),

   .idly_clk_200           (idly_clk_200),

   .sys_rst_n              (sys_rst_n),

   .rst0                   (rst0),

   .rst90                  (rst90),

   .rstdiv0                (rstdiv0),

   .rst200                 (rst200),

   .clk0                   (clk0),

   .clk90                  (clk90),

   .clkdiv0                (clkdiv0),

   .clk200                 (clk200),

   .idelay_ctrl_rdy        (idelay_ctrl_rdy)

   );

 ddr2_top #

 (

   .BANK_WIDTH             (BANK_WIDTH),

   .CKE_WIDTH              (CKE_WIDTH),

   .CLK_WIDTH              (CLK_WIDTH),

   .COL_WIDTH              (COL_WIDTH),

   .CS_NUM                 (CS_NUM),

   .CS_WIDTH               (CS_WIDTH),

   .CS_BITS                (CS_BITS),

   .DM_WIDTH               (DM_WIDTH),

   .DQ_WIDTH               (DQ_WIDTH),

   .DQ_PER_DQS             (DQ_PER_DQS),

   .DQS_WIDTH              (DQS_WIDTH),

   .DQ_BITS                (DQ_BITS),

   .DQS_BITS               (DQS_BITS),

   .ODT_WIDTH              (ODT_WIDTH),

   .ROW_WIDTH              (ROW_WIDTH),

   .ADDITIVE_LAT           (ADDITIVE_LAT),

   .BURST_LEN              (BURST_LEN),

   .BURST_TYPE             (BURST_TYPE),

   .CAS_LAT                (CAS_LAT),

   .ECC_ENABLE             (ECC_ENABLE),

   .APPDATA_WIDTH          (APPDATA_WIDTH),

   .MULTI_BANK_EN          (MULTI_BANK_EN),

   .TWO_T_TIME_EN          (TWO_T_TIME_EN),

   .ODT_TYPE               (ODT_TYPE),

   .REDUCE_DRV             (REDUCE_DRV),

   .REG_ENABLE             (REG_ENABLE),

   .TREFI_NS               (TREFI_NS),

   .TRAS                   (TRAS),

   .TRCD                   (TRCD),

   .TRFC                   (TRFC),

   .TRP                    (TRP),

   .TRTP                   (TRTP),

   .TWR                    (TWR),

   .TWTR                   (TWTR),

   .HIGH_PERFORMANCE_MODE  (HIGH_PERFORMANCE_MODE),

   .IODELAY_GRP            (IODELAY_GRP),

   .SIM_ONLY               (SIM_ONLY),

   .DEBUG_EN               (DEBUG_EN),

   .CLK_PERIOD             (CLK_PERIOD),

   .FPGA_SPEED_GRADE       (1),

   .USE_DM_PORT            (1)

   )

u_ddr2_top_0

(

   .ddr2_dq                (ddr2_dq),

   .ddr2_a                 (ddr2_a),

   .ddr2_ba                (ddr2_ba),

   .ddr2_ras_n             (ddr2_ras_n),

   .ddr2_cas_n             (ddr2_cas_n),

   .ddr2_we_n              (ddr2_we_n),

   .ddr2_cs_n              (ddr2_cs_n),

   .ddr2_odt               (ddr2_odt),

   .ddr2_cke               (ddr2_cke),

   .ddr2_dm                (ddr2_dm),

   .phy_init_done          (phy_init_done),

   .rst0                   (rst0),

   .rst90                  (rst90),

   .rstdiv0                (rstdiv0),

   .clk0                   (clk0),

   .usr_clk (usr_clk), // jb

   .clk90                  (clk90),

   .clkdiv0                (clkdiv0),

   .app_wdf_afull          (app_wdf_afull),

   .app_af_afull           (app_af_afull),

   .rd_data_valid          (rd_data_valid),

   .app_wdf_wren           (app_wdf_wren),

   .app_af_wren            (app_af_wren),

   .app_af_addr            (app_af_addr),

   .app_af_cmd             (app_af_cmd),

   .rd_data_fifo_out       (rd_data_fifo_out),

   .app_wdf_data           (app_wdf_data),

   .app_wdf_mask_data      (app_wdf_mask_data),

   .ddr2_dqs               (ddr2_dqs),

   .ddr2_dqs_n             (ddr2_dqs_n),

   .ddr2_ck                (ddr2_ck),

   .rd_ecc_error           (),

   .ddr2_ck_n              (ddr2_ck_n),

   .dbg_calib_done         (dbg_calib_done),

   .dbg_calib_err          (dbg_calib_err),

   .dbg_calib_dq_tap_cnt   (dbg_calib_dq_tap_cnt),

   .dbg_calib_dqs_tap_cnt  (dbg_calib_dqs_tap_cnt),

   .dbg_calib_gate_tap_cnt  (dbg_calib_gate_tap_cnt),

   .dbg_calib_rd_data_sel  (dbg_calib_rd_data_sel),

   .dbg_calib_rden_dly     (dbg_calib_rden_dly),

   .dbg_calib_gate_dly     (dbg_calib_gate_dly),

   .dbg_idel_up_all        (dbg_idel_up_all),

   .dbg_idel_down_all      (dbg_idel_down_all),

   .dbg_idel_up_dq         (dbg_idel_up_dq),

   .dbg_idel_down_dq       (dbg_idel_down_dq),

   .dbg_idel_up_dqs        (dbg_idel_up_dqs),

   .dbg_idel_down_dqs      (dbg_idel_down_dqs),

   .dbg_idel_up_gate       (dbg_idel_up_gate),

   .dbg_idel_down_gate     (dbg_idel_down_gate),

   .dbg_sel_idel_dq        (dbg_sel_idel_dq),

   .dbg_sel_all_idel_dq    (dbg_sel_all_idel_dq),

   .dbg_sel_idel_dqs       (dbg_sel_idel_dqs),

   .dbg_sel_all_idel_dqs   (dbg_sel_all_idel_dqs),

   .dbg_sel_idel_gate      (dbg_sel_idel_gate),

   .dbg_sel_all_idel_gate  (dbg_sel_all_idel_gate)

   );

   //*****************************************************************

  // Hooks to prevent sim/syn compilation errors (mainly for VHDL - but

  // keep it also in Verilog version of code) w/ floating inputs if

  // DEBUG_EN = 0.

  //*****************************************************************

  generate

    if (DEBUG_EN == 0) begin: gen_dbg_tie_off

      assign dbg_idel_up_all       = 'b0;

      assign dbg_idel_down_all     = 'b0;

      assign dbg_idel_up_dq        = 'b0;

      assign dbg_idel_down_dq      = 'b0;

      assign dbg_idel_up_dqs       = 'b0;

      assign dbg_idel_down_dqs     = 'b0;

      assign dbg_idel_up_gate      = 'b0;

      assign dbg_idel_down_gate    = 'b0;

      assign dbg_sel_idel_dq       = 'b0;

      assign dbg_sel_all_idel_dq   = 'b0;

      assign dbg_sel_idel_dqs      = 'b0;

      assign dbg_sel_all_idel_dqs  = 'b0;

      assign dbg_sel_idel_gate     = 'b0;

      assign dbg_sel_all_idel_gate = 'b0;

    end else begin: gen_dbg_enable

`ifdef XILINX_DDR2_CHIPSCOPE

      //*****************************************************************

      // PHY Debug Port example - see MIG User's Guide, XAPP858 or 

      // Answer Record 29443

      // This logic supports up to 32 DQ and 8 DQS I/O

      // NOTES:

      //   1. PHY Debug Port demo connects to 4 VIO modules:

      //     - 3 VIO modules with only asynchronous inputs

      //      * Monitor IDELAY taps for DQ, DQS, DQS Gate

      //      * Calibration status

      //     - 1 VIO module with synchronous outputs

      //      * Allow dynamic adjustment o f IDELAY taps

      //   2. User may need to modify this code to incorporate other

      //      chipscope-related modules in their larger design (e.g.

      //      if they have other ILA/VIO modules, they will need to

      //      for example instantiate a larger ICON module). In addition

      //      user may want to instantiate more VIO modules to control

      //      IDELAY for more DQ, DQS than is shown here

      //*****************************************************************

      icon4 u_icon

        (

         .control0 (cs_control0),

         .control1 (cs_control1),

         .control2 (cs_control2),

         .control3 (cs_control3)

         );

      //*****************************************************************

      // VIO ASYNC input: Display current IDELAY setting for up to 32

      // DQ taps (32x6) = 192

      //*****************************************************************

      vio_async_in192 u_vio0

        (

         .control  (cs_control0),

         .async_in (vio0_in)

         );

      //*****************************************************************

      // VIO ASYNC input: Display current IDELAY setting for up to 8 DQS

      // and DQS Gate taps (8x6x2) = 96

      //*****************************************************************

      vio_async_in96 u_vio1

        (

         .control  (cs_control1),

         .async_in (vio1_in)

         );

      //*****************************************************************

      // VIO ASYNC input: Display other calibration results

      //*****************************************************************

      vio_async_in100 u_vio2

        (

         .control  (cs_control2),

         .async_in (vio2_in)

         );

      //*****************************************************************

      // VIO SYNC output: Dynamically change IDELAY taps

      //*****************************************************************

      vio_sync_out32 u_vio3

        (

         .control  (cs_control3),

         .clk      (clkdiv0),

         .sync_out (vio3_out)

         );

      //*****************************************************************

      // Bit assignments:

      // NOTE: Not all VIO, ILA inputs/outputs may be used - these will

      //       be dependent on the user's particular bit width

      //*****************************************************************

      if (DQ_WIDTH <= 32) begin: gen_dq_le_32

        assign vio0_in[(6*DQ_WIDTH)-1:0]

                 = dbg_calib_dq_tap_cnt[(6*DQ_WIDTH)-1:0];

      end else begin: gen_dq_gt_32

        assign vio0_in = dbg_calib_dq_tap_cnt[191:0];

      end

      if (DQS_WIDTH <= 8) begin: gen_dqs_le_8

        assign vio1_in[(6*DQS_WIDTH)-1:0]

                 = dbg_calib_dqs_tap_cnt[(6*DQS_WIDTH)-1:0];

        assign vio1_in[(12*DQS_WIDTH)-1:(6*DQS_WIDTH)]

                 =  dbg_calib_gate_tap_cnt[(6*DQS_WIDTH)-1:0];

      end else begin: gen_dqs_gt_32

        assign vio1_in[47:0]  = dbg_calib_dqs_tap_cnt[47:0];

        assign vio1_in[95:48] = dbg_calib_gate_tap_cnt[47:0];

      end

//dbg_calib_rd_data_sel

     if (DQS_WIDTH <= 8) begin: gen_rdsel_le_8

        assign vio2_in[(DQS_WIDTH)+7:8]

                 = dbg_calib_rd_data_sel[(DQS_WIDTH)-1:0];

     end else begin: gen_rdsel_gt_32

      assign vio2_in[15:8]

                 = dbg_calib_rd_data_sel[7:0];

     end

//dbg_calib_rden_dly

     if (DQS_WIDTH <= 8) begin: gen_calrd_le_8

       assign vio2_in[(5*DQS_WIDTH)+19:20]

                 = dbg_calib_rden_dly[(5*DQS_WIDTH)-1:0];

     end else begin: gen_calrd_gt_32

       assign vio2_in[59:20]

                 = dbg_calib_rden_dly[39:0];

     end

//dbg_calib_gate_dly

     if (DQS_WIDTH <= 8) begin: gen_calgt_le_8

       assign vio2_in[(5*DQS_WIDTH)+59:60]

                 = dbg_calib_gate_dly[(5*DQS_WIDTH)-1:0];

     end else begin: gen_calgt_gt_32

       assign vio2_in[99:60]

                 = dbg_calib_gate_dly[39:0];

     end

//dbg_sel_idel_dq

     if (DQ_BITS <= 5) begin: gen_selid_le_5

       assign dbg_sel_idel_dq[DQ_BITS-1:0]

                 = vio3_out[DQ_BITS+7:8];

     end else begin: gen_selid_gt_32

       assign dbg_sel_idel_dq[4:0]

                 = vio3_out[12:8];

     end

//dbg_sel_idel_dqs

     if (DQS_BITS <= 3) begin: gen_seldqs_le_3

       assign dbg_sel_idel_dqs[DQS_BITS:0]

                 = vio3_out[(DQS_BITS+16):16];

     end else begin: gen_seldqs_gt_32

       assign dbg_sel_idel_dqs[3:0]

                 = vio3_out[19:16];

     end

//dbg_sel_idel_gate

     if (DQS_BITS <= 3) begin: gen_gtdqs_le_3

       assign dbg_sel_idel_gate[DQS_BITS:0]

                 = vio3_out[(DQS_BITS+21):21];

     end else begin: gen_gtdqs_gt_32

       assign dbg_sel_idel_gate[3:0]

                 = vio3_out[24:21];

     end

`endif //  `ifdef XILINX_DDR2_CHIPSCOPE

      assign vio2_in[3:0]              = dbg_calib_done;

      assign vio2_in[7:4]              = dbg_calib_err;

      assign dbg_idel_up_all           = vio3_out[0];

      assign dbg_idel_down_all         = vio3_out[1];

      assign dbg_idel_up_dq            = vio3_out[2];

      assign dbg_idel_down_dq          = vio3_out[3];

      assign dbg_idel_up_dqs           = vio3_out[4];

      assign dbg_idel_down_dqs         = vio3_out[5];

      assign dbg_idel_up_gate          = vio3_out[6];

      assign dbg_idel_down_gate        = vio3_out[7];

      assign dbg_sel_all_idel_dq       = vio3_out[15];

      assign dbg_sel_all_idel_dqs      = vio3_out[20];

      assign dbg_sel_all_idel_gate     = vio3_out[25];

    end

  endgenerate

endmodule