Subversion Repositories openrisc

//*****************************************************************************

// DISCLAIMER OF LIABILITY

//

// This file contains proprietary and confidential information of

// Xilinx, Inc. ("Xilinx"), that is distributed under a license

// from Xilinx, and may be used, copied and/or disclosed only

// pursuant to the terms of a valid license agreement with Xilinx.

//

// XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION

// ("MATERIALS") "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER

// EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING WITHOUT

// LIMITATION, ANY WARRANTY WITH RESPECT TO NONINFRINGEMENT,

// MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Xilinx

// does not warrant that functions included in the Materials will

// meet the requirements of Licensee, or that the operation of the

// Materials will be uninterrupted or error-free, or that defects

// in the Materials will be corrected. Furthermore, Xilinx does

// not warrant or make any representations regarding use, or the

// results of the use, of the Materials in terms of correctness,

// accuracy, reliability or otherwise.

//

// Xilinx products are not designed or intended to be fail-safe,

// or for use in any application requiring fail-safe performance,

// such as life-support or safety devices or systems, Class III

// medical devices, nuclear facilities, applications related to

// the deployment of airbags, or any other applications that could

// lead to death, personal injury or severe property or

// environmental damage (individually and collectively, "critical

// applications"). Customer assumes the sole risk and liability

// of any use of Xilinx products in critical applications,

// subject only to applicable laws and regulations governing

// limitations on product liability.

//

// Copyright 2005, 2006, 2007, 2008 Xilinx, Inc.

// All rights reserved.

//

// This disclaimer and copyright notice must be retained as part

// of this file at all times.

//*****************************************************************************

//   ____  ____

//  /   /\/   /

// /___/  \  /   Vendor             : Xilinx

// \   \   \/    Version            : 3.6.1

//  \   \        Application        : MIG

//  /   /        Filename           : data_write.v

// /___/   /\    Date Last Modified : $Date: 2010/11/26 18:25:41 $

// \   \  /  \   Date Created       : Mon May 2 2005

//  \___\/\___\

// Device       : Spartan-3/3A/3A-DSP

// Design Name  : DDR2 SDRAM

// Purpose      : Data write operation performed through the pipelines in this

//                module.

//*****************************************************************************

`timescale 1ns/100ps

`include "s3adsp_ddr2_parameters_0.v"

module  s3adsp_ddr2_data_write_0

  (

   input     [((`DATA_WIDTH*2)-1):0]  user_input_data,

   input [((`DATA_MASK_WIDTH*2)-1):0] user_data_mask,

   input                              clk90,

   input                              write_enable,

   output reg                         write_en_val,

   output [((`DATA_WIDTH)-1):0]       write_data_falling,

   output [((`DATA_WIDTH)-1):0]       write_data_rising,

   output [((`DATA_MASK_WIDTH)-1):0]  data_mask_f,

   output [((`DATA_MASK_WIDTH)-1):0]  data_mask_r

   );

   reg                                write_en_P1;

   reg [((`DATA_WIDTH*2)-1):0]        write_data1;

   reg [((`DATA_WIDTH*2)-1):0]        write_data2;

   reg [((`DATA_WIDTH*2)-1):0]        write_data3;

   reg [((`DATA_WIDTH*2)-1):0]        write_data4

   /* synthesis syn_srlstyle="registers" */;

   reg [((`DATA_MASK_WIDTH*2)-1):0]   write_data_m1;

   reg [((`DATA_MASK_WIDTH*2)-1):0]   write_data_m2;

   reg [((`DATA_MASK_WIDTH*2)-1):0]   write_data_m3;

   reg [((`DATA_MASK_WIDTH*2)-1):0]   write_data_m4;

   reg [(`DATA_WIDTH-1):0]            write_data90;

   reg [(`DATA_WIDTH-1):0]            write_data90_1;

   reg [(`DATA_WIDTH-1):0]            write_data90_2;

   reg [(`DATA_WIDTH-1):0]            write_data270;

   reg [(`DATA_WIDTH-1):0]            write_data270_1;

   reg [(`DATA_WIDTH-1):0]            write_data270_2;

   reg [(`DATA_MASK_WIDTH-1):0]       write_data_m90;

   reg [(`DATA_MASK_WIDTH-1):0]       write_data_m90_1;

   reg [(`DATA_MASK_WIDTH-1):0]       write_data_m90_2;

   reg [((`DATA_MASK_WIDTH)-1):0]     write_data_m270;

   reg [((`DATA_MASK_WIDTH)-1):0]     write_data_m270_1;

   reg [((`DATA_MASK_WIDTH)-1):0]     write_data_m270_2;

   wire [((`DATA_WIDTH*2)-1):0]       write_data0;

   wire [((`DATA_MASK_WIDTH*2)-1):0]  write_data_m0;

   assign write_data0   = user_input_data;

   assign write_data_m0 = user_data_mask;

   always@(posedge clk90) begin

      write_data1 <= write_data0;

      write_data2 <= write_data1;

      write_data3 <= write_data2;

      write_data4 <= write_data3;

   end

   always@(posedge clk90) begin

      write_data_m1 <= write_data_m0;

      write_data_m2 <= write_data_m1;

      write_data_m3 <= write_data_m2;

      write_data_m4 <= write_data_m3;

   end

   always@(posedge clk90) begin

      write_data90   <= write_data4[`DATA_WIDTH-1 : 0];

      write_data_m90       <= write_data_m4[`DATA_MASK_WIDTH-1:0];

      write_data90_1      <= write_data90;

      write_data_m90_1    <= write_data_m90;

      write_data90_2      <= write_data90_1;

      write_data_m90_2    <= write_data_m90_1;

   end

   always@ (negedge clk90) begin

      write_data270      <= write_data4[(`DATA_WIDTH*2)-1 : `DATA_WIDTH];

      write_data_m270    <= write_data_m4[(`DATA_MASK_WIDTH*2)-1:`DATA_MASK_WIDTH];

      write_data270_1    <= write_data270;

      write_data_m270_1  <= write_data_m270;

      write_data270_2    <= write_data270_1;

      write_data_m270_2  <= write_data_m270_1;

   end

   assign write_data_rising  = write_data270_2;

   assign write_data_falling = write_data90_2;

   assign data_mask_r = write_data_m270_2;

   assign data_mask_f = write_data_m90_2;

// write enable for data path

   always@(posedge clk90) begin

     write_en_P1 <= write_enable;

   end

   always@(negedge clk90) begin

     write_en_val   <= write_en_P1;

   end

endmodule