Subversion Repositories openrisc

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  eth_register.v                                              ////

////                                                              ////

////  This file is part of the Ethernet IP core project           ////

////  http://www.opencores.org/project,ethmac                   ////

////                                                              ////

////  Author(s):                                                  ////

////      - Igor Mohor (igorM@opencores.org)                      ////

////                                                              ////

////  All additional information is avaliable in the Readme.txt   ////

////  file.                                                       ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2001, 2002 Authors                             ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.5  2002/08/16 12:33:27  mohor

// Parameter ResetValue changed to capital letters.

//

// Revision 1.4  2002/02/26 16:18:08  mohor

// Reset values are passed to registers through parameters

//

// Revision 1.3  2002/01/23 10:28:16  mohor

// Link in the header changed.

//

// Revision 1.2  2001/10/19 08:43:51  mohor

// eth_timescale.v changed to timescale.v This is done because of the

// simulation of the few cores in a one joined project.

//

// Revision 1.1  2001/08/06 14:44:29  mohor

// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).

// Include files fixed to contain no path.

// File names and module names changed ta have a eth_ prologue in the name.

// File eth_timescale.v is used to define timescale

// All pin names on the top module are changed to contain _I, _O or _OE at the end.

// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O

// and Mdo_OE. The bidirectional signal must be created on the top level. This

// is done due to the ASIC tools.

//

//

//

//

//

//

//

`include "timescale.v"

module eth_register(DataIn, DataOut, Write, Clk, Reset, SyncReset);

parameter WIDTH = 8; // default parameter of the register width

parameter RESET_VALUE = 0;

input [WIDTH-1:0] DataIn;

input Write;

input Clk;

input Reset;

input SyncReset;

output [WIDTH-1:0] DataOut;

reg    [WIDTH-1:0] DataOut;

always @ (posedge Clk or posedge Reset)

begin

  if(Reset)

    DataOut<= RESET_VALUE;

  else

  if(SyncReset)

    DataOut<= RESET_VALUE;

  else

  if(Write)                         // write

    DataOut<= DataIn;

end

endmodule   // Register