Subversion Repositories openrisc_me

//////////////////////////////////////////////////////////////////////

// usbHostSlave_h.v                                              

//////////////////////////////////////////////////////////////////////

`ifdef usbHostSlave_h_vdefined

`else

`define usbHostSlave_h_vdefined

// Version 0.6 - Feb 4th 2005. Fixed bit stuffing and de-stuffing. This version succesfully supports 

//             control reads and writes to USB flash dongle

// Version 0.7 - Feb 24th 2005. Added support for isochronous transfers, fixed resume, connect and disconnect 

//             time outs, added low speed EOP keep alive. The TX bit rate is now controlled by 

//             SIETransmitter, and takes account of the requirement that SOF, and PREAMBLE are always full

//             speed, and TX resume is always low speed.

//             Fixed read clock recovery (readUSBWireData.v) issue which was resulting 

//             in missing receive packets.

//             Fixed broken SOF Sync mode (where transacations are synchronized with the SOF transmission)

//             by adding kludged delay to softranmit. This needs to be fixed properly.

//             This version has undergone limited testing

//             with full speed flash dongle, low speed keyboard, and a PC in full and low speed modes.

// Version 0.8 - June 24th 2005. Added bus access to the host SOFTimer. This version has been tested

//             with uClinux, and is known to work with a full speed USB flash stick.

//             Moving Opencores project status from Beta to done.

//             TODO: Test isochronous mode, and low speed mode using uClinux driver

//                   Create a seperate clock domain for the bus interface

//                   Add frame period adjustment capability

//                   Add compilation flags for slave only and host only versions

//                   Create data bus width options beyond 8-bit

// Version 1.0 - October 14th 2005. Seperated the bus clock from the usb logic clock

//             Removed TX and RX fifo status registers, and removed 

//             TX fifo data count register.

//             Added RESET_CORE bit to HOST_SLAVE_CONTROL_REG. 

//             Fixed slave mode bug which caused receive fifo to be filled with 

//             incoming data when the slave was responding with a NAK, and the 

//             data should have been discarded.

// Version 1.1 - February 23rd 2006. Fixed bug related to 'noActivityTimeOut'

//             Previously the 'noActivityTimeOut' flag was repetitively pulsed whenever

//             there was no detected activity on the USB data lines. This caused an infrequent

//             misreporting of time out errors. 'noActivityTimeOut' is now only enabled when

//             the higher level state machines are actively looking for receive packets. 

//             Modified USB RX data clock recovery, so that data is sampled during the middle

//             of a USB bit period. Fixed a bug which could result in double sampling

//             of USB RX data if clock phase adjustments were required in the middle of a 

//             USB packet.

// Version 1.2 - October 1st 2006. Small changes to .asf FSM's required

//             during migration to ActiveHDL 7.1. Released SystemC test bench.

//             Re-generated .v files using ActiveHDL 7.1

//             Replaced individual timescale directives with `include "timescale.v

//             Renamed top level Altera wrapper from 'usbHostSlaveWrap' to 

//             'usbHostSlaveAvalonWrap'

// Version 1.3 - March 22nd 2008. Fixed bug in 'readUSBWireData'. Added

//             synchronizer to incoming USB wire data to avoid

//             metastability, and delay hazards. Not entirely sure, but it appears that 

//             this bug caused more problems with some of the newer low power FPGAs

//             Maybe because they are more prone to problems with metastable

//             inputs that feed logic functions causing excessive high speed

//             toggle activity, and disrupting nearby cicuits.

// Version 2.0 - June 16th 2008. Added two new top level modules which

//             allow the instantiation of only host (usbHost.v), or only device

//             features. Added double sync stages between usbClk, and busClk domains

//             to fix possible metastability issues. Also modified synchronization to

//             allow operation with busClk frequency less than usbClk frequency (down to

//             24MHz). Integrated full support for USB PHY. Prior to this modification

//             the user would need to instantiate a GPIO module to control USB speed,

//             D+ and D- pull-up control, and VBUS detect. Fixed bug in bus interface wb_ack.

//             Modified cross-clock synchronisation of fifo resets

//             Added usbDevice, a standalone usb device implementation of usbhostslave

//             no additional hardware or software required

// Most significant nibble corresponds to major revision.

// Least significant nibble corresponds to minor revision.

`define USBHOSTSLAVE_VERSION_NUM 8'h20

//Host slave common registers

`define HOST_SLAVE_CONTROL_REG 1'b0

`define HOST_SLAVE_VERSION_REG 1'b1

`endif //usbHostSlave_h_vdefined