URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [or1200/] [or1200_mult_mac.v] - Blame information for rev 751

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  OR1200's Top level multiplier, divider and MAC              ////
////                                                              ////
////  This file is part of the OpenRISC 1200 project              ////
////  http://opencores.org/project,or1k                           ////
////                                                              ////
////  Description                                                 ////
////  Multiplier is 32x32 however multiply instructions only      ////
////  use lower 32 bits of the result. MAC is 32x32=64+64.        ////
////                                                              ////
////  To Do:                                                      ////
////   - make signed division better, w/o negating the operands   ////
////   - implement non-serial divider that is synthesizable       ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////      - Julius Baxter, julius@opencores.org                   ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000, 2010 Authors and OPENCORES.ORG           ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: or1200_mult_mac.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Minor update: 
// Bugs fixed. 
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_mult_mac(
                       // Clock and reset
                       clk, rst,
 
                       // Multiplier/MAC interface
                       ex_freeze, id_macrc_op, macrc_op, a, b, mac_op, alu_op,
                       result, mult_mac_stall,
 
                       // Overflow
                       ovforw, ov_we,
 
                       // SPR interface
                       spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o
                       );
 
   parameter width = `OR1200_OPERAND_WIDTH;
 
   //
   // I/O
   //
 
   //
   // Clock and reset
   //
   input                                clk;
   input                                rst;
 
   //
   // Multiplier/MAC interface
   //
   input                                ex_freeze;
   input                                id_macrc_op;
   input                                macrc_op;
   input [width-1:0]                     a;
   input [width-1:0]                     b;
   input [`OR1200_MACOP_WIDTH-1:0]       mac_op;
   input [`OR1200_ALUOP_WIDTH-1:0]       alu_op;
   output [width-1:0]                    result;
   output                               mult_mac_stall;
   output                               ovforw, ov_we;
 
   //
   // SPR interface
   //
   input                                spr_cs;
   input                                spr_write;
   input [31:0]                  spr_addr;
   input [31:0]                  spr_dat_i;
   output [31:0]                         spr_dat_o;
 
   //
   // Internal wires and regs
   //
   reg [width-1:0]                       result;
   reg                                  ex_freeze_r;
   wire                                 alu_op_mul;
   wire                                 alu_op_smul;
`ifdef OR1200_MULT_IMPLEMENTED
   reg [2*width-1:0]                     mul_prod_r;
   wire                                 alu_op_umul;
 `ifdef OR1200_MULT_SERIAL
   reg [5:0]                             serial_mul_cnt;
   reg                                  mul_free;
 `endif
`else
   wire [2*width-1:0]                    mul_prod_r;
`endif
   wire [2*width-1:0]                    mul_prod;
   wire                                 mul_stall;
   reg [1:0]                             mul_stall_count;
   wire [`OR1200_MACOP_WIDTH-1:0]        mac_op;
`ifdef OR1200_MAC_IMPLEMENTED
   reg [`OR1200_MACOP_WIDTH-1:0]         mac_op_r1;
   reg [`OR1200_MACOP_WIDTH-1:0]         mac_op_r2;
   reg [`OR1200_MACOP_WIDTH-1:0]         mac_op_r3;
   reg                                  mac_stall_r;
   reg [63:0]                            mac_r;
`else
   wire [`OR1200_MACOP_WIDTH-1:0]        mac_op_r1;
   wire [`OR1200_MACOP_WIDTH-1:0]        mac_op_r2;
   wire [`OR1200_MACOP_WIDTH-1:0]        mac_op_r3;
   wire                                 mac_stall_r;
   wire [63:0]                           mac_r;
`endif
   wire [width-1:0]                      x;
   wire [width-1:0]                      y;
   wire                                 spr_maclo_we;
   wire                                 spr_machi_we;
   wire                                 alu_op_div;
   wire                                 alu_op_udiv;
   wire                                 alu_op_sdiv;
   reg                                  div_free;
   wire                                 div_stall;
`ifdef OR1200_DIV_IMPLEMENTED
 `ifdef OR1200_DIV_SERIAL
   reg [2*width-1:0]                     div_quot_r;
   wire [width-1:0]                      div_tmp;
   reg [5:0]                             div_cntr;
 `else
   reg [width-1:0]                       div_quot_r;
   reg [width-1:0]                       div_quot_generic;
 `endif
   wire                                 div_by_zero;
`endif
   reg                                  ovforw, ov_we;
 
   //
   // Combinatorial logic
   //
`ifdef OR1200_MULT_IMPLEMENTED
   assign alu_op_smul = (alu_op == `OR1200_ALUOP_MUL);
   assign alu_op_umul = (alu_op == `OR1200_ALUOP_MULU);
   assign alu_op_mul = alu_op_smul | alu_op_umul;
`else
   assign alu_op_smul = 0;
   assign alu_op_mul = 0;
`endif
`ifdef OR1200_MAC_IMPLEMENTED
   assign spr_maclo_we = spr_cs & spr_write & spr_addr[`OR1200_MAC_ADDR];
   assign spr_machi_we = spr_cs & spr_write & !spr_addr[`OR1200_MAC_ADDR];
   assign spr_dat_o = spr_addr[`OR1200_MAC_ADDR] ? mac_r[31:0] : mac_r[63:32];
`else
   assign spr_maclo_we = 1'b0;
   assign spr_machi_we = 1'b0;
   assign spr_dat_o = 32'h0000_0000;
`endif
`ifdef OR1200_DIV_IMPLEMENTED
   assign alu_op_sdiv = (alu_op == `OR1200_ALUOP_DIV);
   assign alu_op_udiv = (alu_op == `OR1200_ALUOP_DIVU);
   assign alu_op_div = alu_op_sdiv | alu_op_udiv;
`else
   assign alu_op_udiv = 1'b0;
   assign alu_op_sdiv = 1'b0;
   assign alu_op_div = 1'b0;
`endif
 
   assign x = (alu_op_sdiv | alu_op_smul) & a[31] ? ~a + 32'b1 :
              alu_op_div | alu_op_mul | (|mac_op) ? a : 32'd0;
   assign y = (alu_op_sdiv | alu_op_smul) & b[31] ? ~b + 32'b1 :
              alu_op_div | alu_op_mul | (|mac_op) ? b : 32'd0;
 
   assign div_by_zero = !(|b) & alu_op_div;
 
 
   // Used to indicate when we should check for new multiply or MAC ops
   always @(posedge clk or `OR1200_RST_EVENT rst)
     if (rst == `OR1200_RST_VALUE)
       ex_freeze_r <= 1'b1;
     else
       ex_freeze_r <= ex_freeze;
 
   //
   // Select result of current ALU operation to be forwarded
   // to next instruction and to WB stage
   //
   always @*
     casez(alu_op)      // synopsys parallel_case
`ifdef OR1200_DIV_IMPLEMENTED
       `OR1200_ALUOP_DIV: begin
          result = a[31] ^ b[31] ? ~div_quot_r[31:0] + 32'd1 : div_quot_r[31:0];
       end
       `OR1200_ALUOP_DIVU: begin
          result = div_quot_r[31:0];
       end
`endif
`ifdef OR1200_MULT_IMPLEMENTED
       `OR1200_ALUOP_MUL: begin
          result = a[31] ^ b[31] ? ~mul_prod_r[31:0] + 32'd1 : mul_prod_r[31:0];
       end
         `OR1200_ALUOP_MULU: begin
          result = mul_prod_r[31:0];
       end
`endif
       default:
`ifdef OR1200_MAC_IMPLEMENTED
 `ifdef OR1200_MAC_SHIFTBY
         result = mac_r[`OR1200_MAC_SHIFTBY+31:`OR1200_MAC_SHIFTBY];
 `else
       result = mac_r[31:0];
 `endif
`else
       result = {width{1'b0}};
`endif
     endcase // casez (alu_op)
 
 
   //
   // Overflow generation
   //
   always @*
     casez(alu_op)      // synopsys parallel_case
`ifdef OR1200_IMPL_OV
 `ifdef OR1200_MULT_IMPLEMENTED
       `OR1200_ALUOP_MUL: begin
          // Actually doing unsigned multiply internally, and then negate on
          // output as appropriate, so if sign bit is set, then is overflow
          // unless incoming signs differ and result is 2^(width-1)
          ovforw = (mul_prod_r[width-1] &&
                    !((a[width-1]^b[width-1]) && ~|mul_prod_r[width-2:0])) ||
                   |mul_prod_r[2*width-1:32];
 
          ov_we = 1;
       end
       `OR1200_ALUOP_MULU : begin
          // Overflow on unsigned multiply is simpler.
          ovforw = |mul_prod_r[2*width-1:32];
          ov_we = 1;
       end
 `endif //  `ifdef OR1200_MULT_IMPLEMENTED
 `ifdef OR1200_DIV_IMPLEMENTED
       `OR1200_ALUOP_DIVU,
       `OR1200_ALUOP_DIV: begin
          // Overflow on divide by zero or -2^(width-1)/-1
          ovforw = div_by_zero || (a==32'h8000_0000 && b==32'hffff_ffff);
          ov_we = 1;
       end
 `endif
`endif //  `ifdef OR1200_IMPL_OV
       default: begin
          ovforw = 0;
          ov_we = 0;
       end
     endcase // casez (alu_op)
 
 
`ifdef OR1200_MULT_IMPLEMENTED
 `ifdef OR1200_MULT_SERIAL
 
   always @(`OR1200_RST_EVENT rst or posedge clk)
     if (rst == `OR1200_RST_VALUE) begin
        mul_prod_r <=  64'h0000_0000_0000_0000;
        serial_mul_cnt <= 6'd0;
        mul_free <= 1'b1;
 
     end
     else if (|serial_mul_cnt) begin
        serial_mul_cnt <= serial_mul_cnt - 6'd1;
        if (mul_prod_r[0])
          mul_prod_r[(width*2)-1:width-1] <= mul_prod_r[(width*2)-1:width] + x;
        else
          mul_prod_r[(width*2)-1:width-1] <= {1'b0,mul_prod_r[(width*2)-1:
                                                              width]};
        mul_prod_r[width-2:0] <= mul_prod_r[width-1:1];
 
     end
     else if (alu_op_mul && mul_free) begin
        mul_prod_r <= {32'd0, y};
        mul_free <= 0;
        serial_mul_cnt <= 6'b10_0000;
     end
     else if (!ex_freeze | mul_free) begin
        mul_free <= 1'b1;
     end
 
   assign mul_stall = (|serial_mul_cnt) | (alu_op_mul & !ex_freeze_r);
 
 `else
 
   //
   // Instantiation of the multiplier
   //
  `ifdef OR1200_ASIC_MULTP2_32X32
   or1200_amultp2_32x32 or1200_amultp2_32x32(
                                             .X(x),
                                             .Y(y),
                                             .RST(rst),
                                             .CLK(clk),
                                             .P(mul_prod)
                                             );
  `else // OR1200_ASIC_MULTP2_32X32
   or1200_gmultp2_32x32 or1200_gmultp2_32x32(
                                             .X(x),
                                             .Y(y),
                                             .RST(rst),
                                             .CLK(clk),
                                             .P(mul_prod)
                                             );
  `endif // OR1200_ASIC_MULTP2_32X32   
 
   //
   // Registered output from the multiplier
   //
   always @(`OR1200_RST_EVENT rst or posedge clk)
     if (rst == `OR1200_RST_VALUE) begin
        mul_prod_r <=  64'h0000_0000_0000_0000;
     end
     else begin
        mul_prod_r <=  mul_prod[63:0];
     end
 
   //
   // Generate stall signal during multiplication
   //
   always @(`OR1200_RST_EVENT rst or posedge clk)
     if (rst == `OR1200_RST_VALUE)
       mul_stall_count <= 0;
     else if (!(|mul_stall_count))
       mul_stall_count <= {mul_stall_count[0], alu_op_mul & !ex_freeze_r};
     else
       mul_stall_count <= {mul_stall_count[0],1'b0};
 
   assign mul_stall = (|mul_stall_count) |
                      (!(|mul_stall_count) & alu_op_mul & !ex_freeze_r);
 
 `endif // !`ifdef OR1200_MULT_SERIAL   
 
`else // OR1200_MULT_IMPLEMENTED
   assign mul_prod = {2*width{1'b0}};
   assign mul_prod_r = {2*width{1'b0}};
   assign mul_stall = 0;
`endif // OR1200_MULT_IMPLEMENTED
 
`ifdef OR1200_MAC_IMPLEMENTED
 
   //
   // Propagation of l.mac opcode, only register it for one cycle
   //
   always @(posedge clk or `OR1200_RST_EVENT rst)
     if (rst == `OR1200_RST_VALUE)
       mac_op_r1 <=  `OR1200_MACOP_WIDTH'b0;
     else
       mac_op_r1 <=  !ex_freeze_r ? mac_op : `OR1200_MACOP_WIDTH'b0;
 
   //
   // Propagation of l.mac opcode
   //
   always @(posedge clk or `OR1200_RST_EVENT rst)
     if (rst == `OR1200_RST_VALUE)
       mac_op_r2 <=  `OR1200_MACOP_WIDTH'b0;
     else
       mac_op_r2 <=  mac_op_r1;
 
   //
   // Propagation of l.mac opcode
   //
   always @(posedge clk or `OR1200_RST_EVENT rst)
     if (rst == `OR1200_RST_VALUE)
       mac_op_r3 <=  `OR1200_MACOP_WIDTH'b0;
     else
       mac_op_r3 <=  mac_op_r2;
 
   //
   // Implementation of MAC
   //
   always @(`OR1200_RST_EVENT rst or posedge clk)
     if (rst == `OR1200_RST_VALUE)
       mac_r <=  64'h0000_0000_0000_0000;
 `ifdef OR1200_MAC_SPR_WE
     else if (spr_maclo_we)
       mac_r[31:0] <=  spr_dat_i;
     else if (spr_machi_we)
       mac_r[63:32] <=  spr_dat_i;
 `endif
     else if (mac_op_r3 == `OR1200_MACOP_MAC)
       mac_r <=  mac_r + mul_prod_r;
     else if (mac_op_r3 == `OR1200_MACOP_MSB)
       mac_r <=  mac_r - mul_prod_r;
     else if (macrc_op && !ex_freeze)
       mac_r <=  64'h0000_0000_0000_0000;
 
   //
   // Stall CPU if l.macrc is in ID and MAC still has to process l.mac 
   // instructions in EX stage (e.g. inside multiplier)
   // This stall signal is also used by the divider.
   //
   always @(`OR1200_RST_EVENT rst or posedge clk)
     if (rst == `OR1200_RST_VALUE)
       mac_stall_r <=  1'b0;
     else
       mac_stall_r <=  (|mac_op | (|mac_op_r1) | (|mac_op_r2)) &
                       (id_macrc_op | mac_stall_r);
 
`else // OR1200_MAC_IMPLEMENTED
   assign mac_stall_r = 1'b0;
   assign mac_r = {2*width{1'b0}};
   assign mac_op_r1 = `OR1200_MACOP_WIDTH'b0;
   assign mac_op_r2 = `OR1200_MACOP_WIDTH'b0;
   assign mac_op_r3 = `OR1200_MACOP_WIDTH'b0;
`endif // OR1200_MAC_IMPLEMENTED
 
`ifdef OR1200_DIV_IMPLEMENTED
 
   //
   // Serial division
   //
 `ifdef OR1200_DIV_SERIAL
   assign div_tmp = div_quot_r[63:32] - y;
   always @(`OR1200_RST_EVENT rst or posedge clk)
     if (rst == `OR1200_RST_VALUE) begin
        div_quot_r <=  64'h0000_0000_0000_0000;
        div_free <=  1'b1;
        div_cntr <=  6'b00_0000;
     end
     else if (div_by_zero) begin
        div_quot_r <=  64'h0000_0000_0000_0000;
        div_free <=  1'b1;
        div_cntr <=  6'b00_0000;
     end
     else if (|div_cntr) begin
        if (div_tmp[31])
          div_quot_r <=  {div_quot_r[62:0], 1'b0};
        else
          div_quot_r <=  {div_tmp[30:0], div_quot_r[31:0], 1'b1};
        div_cntr <=  div_cntr - 6'd1;
     end
     else if (alu_op_div && div_free) begin
        div_quot_r <=  {31'b0, x[31:0], 1'b0};
        div_cntr <=  6'b10_0000;
        div_free <=  1'b0;
     end
     else if (div_free | !ex_freeze) begin
        div_free <=  1'b1;
     end
 
   assign div_stall = (|div_cntr) | (!ex_freeze_r & alu_op_div);
 
 
 `else // !`ifdef OR1200_DIV_SERIAL
 
   // Full divider
   // TODO: Perhaps provide module that can be technology dependent.
   always @(`OR1200_RST_EVENT rst or posedge clk) begin
      if (rst == `OR1200_RST_VALUE) begin
         div_quot_r <=  32'd0;
         div_quot_generic <= 32'd0;
      end
      else begin
         if (alu_op_udiv & !(|y)) // unsigned divide by 0 - force to MAX
           div_quot_generic[31:0] <= 32'hffff_ffff;
         else if (alu_op_div)
           div_quot_generic[31:0] <= x / y;
      end
 
      // Add any additional statges of pipelining as required here. Ensure
      // ends with div_quot_r.
      // Then add logic to ensure div_stall stays high for as long as the
      // division should take.      
 
      div_quot_r[31:0] <= div_quot_generic;
 
   end
 
   assign div_stall = 0;
 
 `endif
 
`else // !`ifdef OR1200_DIV_IMPLEMENTED
 
   assign div_stall = 0;
 
`endif // !`ifdef OR1200_DIV_IMPLEMENTED
 
 
   //   
   // Stall output
   //
   assign mult_mac_stall = mac_stall_r | div_stall | mul_stall;
 
endmodule

Line No.	Rev	Author	Line
1	350	julius	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// OR1200's Top level multiplier, divider and MAC ////`
4			`//// ////`
5			`//// This file is part of the OpenRISC 1200 project ////`
6			`//// http://opencores.org/project,or1k ////`
7			`//// ////`
8			`//// Description ////`
9			`//// Multiplier is 32x32 however multiply instructions only ////`
10			`//// use lower 32 bits of the result. MAC is 32x32=64+64. ////`
11			`//// ////`
12			`//// To Do: ////`
13			`//// - make signed division better, w/o negating the operands ////`
14	435	julius	`//// - implement non-serial divider that is synthesizable ////`
15	350	julius	`//// ////`
16			`//// Author(s): ////`
17			`//// - Damjan Lampret, lampret@opencores.org ////`
18	435	julius	`//// - Julius Baxter, julius@opencores.org ////`
19	350	julius	`//// ////`
20			`//////////////////////////////////////////////////////////////////////`
21			`//// ////`
22	435	julius	`//// Copyright (C) 2000, 2010 Authors and OPENCORES.ORG ////`
23	350	julius	`//// ////`
24			`//// This source file may be used and distributed without ////`
25			`//// restriction provided that this copyright statement is not ////`
26			`//// removed from the file and that any derivative work contains ////`
27			`//// the original copyright notice and the associated disclaimer. ////`
28			`//// ////`
29			`//// This source file is free software; you can redistribute it ////`
30			`//// and/or modify it under the terms of the GNU Lesser General ////`
31			`//// Public License as published by the Free Software Foundation; ////`
32			`//// either version 2.1 of the License, or (at your option) any ////`
33			`//// later version. ////`
34			`//// ////`
35			`//// This source is distributed in the hope that it will be ////`
36			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
37			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
38			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
39			`//// details. ////`
40			`//// ////`
41			`//// You should have received a copy of the GNU Lesser General ////`
42			`//// Public License along with this source; if not, download it ////`
43			`//// from http://www.opencores.org/lgpl.shtml ////`
44			`//// ////`
45			`//////////////////////////////////////////////////////////////////////`
46			`//`
47			`// CVS Revision History`
48			`//`
49			`// $Log: or1200_mult_mac.v,v $`
50			`// Revision 2.0 2010/06/30 11:00:00 ORSoC`
51			`// Minor update:`
52			`// Bugs fixed.`
53			`//`
54
55			`// synopsys translate_off`
56			`include "timescale.v"
57			`// synopsys translate_on`
58			`include "or1200_defines.v"
59
60			`module or1200_mult_mac(`
61	435	julius	`// Clock and reset`
62			`clk, rst,`
63	350	julius
64	435	julius	`// Multiplier/MAC interface`
65			`ex_freeze, id_macrc_op, macrc_op, a, b, mac_op, alu_op,`
66			`result, mult_mac_stall,`
67	350	julius
68	502	julius	`// Overflow`
69			`ovforw, ov_we,`
70
71	435	julius	`// SPR interface`
72			`spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o`
73			`);`
74	350	julius
75	435	julius	parameter width = `OR1200_OPERAND_WIDTH;
76	350	julius
77	435	julius	`//`
78			`// I/O`
79			`//`
80	350	julius
81	435	julius	`//`
82			`// Clock and reset`
83			`//`
84			`input clk;`
85			`input rst;`
86	350	julius
87	435	julius	`//`
88			`// Multiplier/MAC interface`
89			`//`
90			`input ex_freeze;`
91			`input id_macrc_op;`
92			`input macrc_op;`
93			`input [width-1:0] a;`
94			`input [width-1:0] b;`
95			input [`OR1200_MACOP_WIDTH-1:0] mac_op;
96			input [`OR1200_ALUOP_WIDTH-1:0] alu_op;
97			`output [width-1:0] result;`
98			`output mult_mac_stall;`
99	502	julius	`output ovforw, ov_we;`
100
101	435	julius	`//`
102			`// SPR interface`
103			`//`
104			`input spr_cs;`
105			`input spr_write;`
106			`input [31:0] spr_addr;`
107			`input [31:0] spr_dat_i;`
108			`output [31:0] spr_dat_o;`
109	350	julius
110	435	julius	`//`
111			`// Internal wires and regs`
112			`//`
113			`reg [width-1:0] result;`
114	499	julius	`reg ex_freeze_r;`
115	537	julius	`wire alu_op_mul;`
116			`wire alu_op_smul;`
117	350	julius	`ifdef OR1200_MULT_IMPLEMENTED
118	435	julius	`reg [2*width-1:0] mul_prod_r;`
119			`wire alu_op_umul;`
120			`ifdef OR1200_MULT_SERIAL
121			`reg [5:0] serial_mul_cnt;`
122			`reg mul_free;`
123			`endif
124	350	julius	`else
125	435	julius	`wire [2*width-1:0] mul_prod_r;`
126	350	julius	`endif
127	435	julius	`wire [2*width-1:0] mul_prod;`
128			`wire mul_stall;`
129	499	julius	`reg [1:0] mul_stall_count;`
130	435	julius	wire [`OR1200_MACOP_WIDTH-1:0] mac_op;
131	350	julius	`ifdef OR1200_MAC_IMPLEMENTED
132	435	julius	reg [`OR1200_MACOP_WIDTH-1:0] mac_op_r1;
133			reg [`OR1200_MACOP_WIDTH-1:0] mac_op_r2;
134			reg [`OR1200_MACOP_WIDTH-1:0] mac_op_r3;
135			`reg mac_stall_r;`
136			`reg [63:0] mac_r;`
137	350	julius	`else
138	435	julius	wire [`OR1200_MACOP_WIDTH-1:0] mac_op_r1;
139			wire [`OR1200_MACOP_WIDTH-1:0] mac_op_r2;
140			wire [`OR1200_MACOP_WIDTH-1:0] mac_op_r3;
141			`wire mac_stall_r;`
142			`wire [63:0] mac_r;`
143	350	julius	`endif
144	435	julius	`wire [width-1:0] x;`
145			`wire [width-1:0] y;`
146			`wire spr_maclo_we;`
147			`wire spr_machi_we;`
148			`wire alu_op_div;`
149			`wire alu_op_udiv;`
150			`wire alu_op_sdiv;`
151			`reg div_free;`
152			`wire div_stall;`
153	350	julius	`ifdef OR1200_DIV_IMPLEMENTED
154	435	julius	`ifdef OR1200_DIV_SERIAL
155			`reg [2*width-1:0] div_quot_r;`
156			`wire [width-1:0] div_tmp;`
157			`reg [5:0] div_cntr;`
158			`else
159			`reg [width-1:0] div_quot_r;`
160			`reg [width-1:0] div_quot_generic;`
161	502	julius	`endif
162			`wire div_by_zero;`
163	350	julius	`endif
164	502	julius	`reg ovforw, ov_we;`
165
166	435	julius	`//`
167			`// Combinatorial logic`
168			`//`
169			`ifdef OR1200_MULT_IMPLEMENTED
170			assign alu_op_smul = (alu_op == `OR1200_ALUOP_MUL);
171			assign alu_op_umul = (alu_op == `OR1200_ALUOP_MULU);
172			`assign alu_op_mul = alu_op_smul \| alu_op_umul;`
173	537	julius	`else
174			`assign alu_op_smul = 0;`
175			`assign alu_op_mul = 0;`
176			`endif
177	350	julius	`ifdef OR1200_MAC_IMPLEMENTED
178	435	julius	assign spr_maclo_we = spr_cs & spr_write & spr_addr[`OR1200_MAC_ADDR];
179			assign spr_machi_we = spr_cs & spr_write & !spr_addr[`OR1200_MAC_ADDR];
180			assign spr_dat_o = spr_addr[`OR1200_MAC_ADDR] ? mac_r[31:0] : mac_r[63:32];
181	350	julius	`else
182	435	julius	`assign spr_maclo_we = 1'b0;`
183			`assign spr_machi_we = 1'b0;`
184			`assign spr_dat_o = 32'h0000_0000;`
185	350	julius	`endif
186			`ifdef OR1200_DIV_IMPLEMENTED
187	435	julius	assign alu_op_sdiv = (alu_op == `OR1200_ALUOP_DIV);
188			assign alu_op_udiv = (alu_op == `OR1200_ALUOP_DIVU);
189			`assign alu_op_div = alu_op_sdiv \| alu_op_udiv;`
190	350	julius	`else
191	435	julius	`assign alu_op_udiv = 1'b0;`
192			`assign alu_op_sdiv = 1'b0;`
193			`assign alu_op_div = 1'b0;`
194	350	julius	`endif
195
196	435	julius	`assign x = (alu_op_sdiv \| alu_op_smul) & a[31] ? ~a + 32'b1 :`
197			`alu_op_div \| alu_op_mul \| (\|mac_op) ? a : 32'd0;`
198			`assign y = (alu_op_sdiv \| alu_op_smul) & b[31] ? ~b + 32'b1 :`
199			`alu_op_div \| alu_op_mul \| (\|mac_op) ? b : 32'd0;`
200	350	julius
201	502	julius	`assign div_by_zero = !(\|b) & alu_op_div;`
202
203
204	499	julius	`// Used to indicate when we should check for new multiply or MAC ops`
205			always @(posedge clk or `OR1200_RST_EVENT rst)
206			if (rst == `OR1200_RST_VALUE)
207			`ex_freeze_r <= 1'b1;`
208			`else`
209			`ex_freeze_r <= ex_freeze;`
210
211	435	julius	`//`
212			`// Select result of current ALU operation to be forwarded`
213			`// to next instruction and to WB stage`
214			`//`
215			`always @*`
216			`casez(alu_op) // synopsys parallel_case`
217			`ifdef OR1200_DIV_IMPLEMENTED
218			`OR1200_ALUOP_DIV: begin
219			`result = a[31] ^ b[31] ? ~div_quot_r[31:0] + 32'd1 : div_quot_r[31:0];`
220			`end`
221			`OR1200_ALUOP_DIVU: begin
222			`result = div_quot_r[31:0];`
223			`end`
224			`endif
225			`ifdef OR1200_MULT_IMPLEMENTED
226			`OR1200_ALUOP_MUL: begin
227			`result = a[31] ^ b[31] ? ~mul_prod_r[31:0] + 32'd1 : mul_prod_r[31:0];`
228			`end`
229			`OR1200_ALUOP_MULU: begin
230			`result = mul_prod_r[31:0];`
231			`end`
232			`endif
233			`default:`
234			`ifdef OR1200_MAC_IMPLEMENTED
235	350	julius	`ifdef OR1200_MAC_SHIFTBY
236	435	julius	result = mac_r[`OR1200_MAC_SHIFTBY+31:`OR1200_MAC_SHIFTBY];
237	350	julius	`else
238	435	julius	`result = mac_r[31:0];`
239	350	julius	`endif
240	435	julius	`else
241			`result = {width{1'b0}};`
242			`endif
243	502	julius	`endcase // casez (alu_op)`
244	435	julius
245	502	julius
246			`//`
247			`// Overflow generation`
248			`//`
249			`always @*`
250			`casez(alu_op) // synopsys parallel_case`
251			`ifdef OR1200_IMPL_OV
252			`ifdef OR1200_MULT_IMPLEMENTED
253			`OR1200_ALUOP_MUL: begin
254			`// Actually doing unsigned multiply internally, and then negate on`
255			`// output as appropriate, so if sign bit is set, then is overflow`
256	505	julius	`// unless incoming signs differ and result is 2^(width-1)`
257			`ovforw = (mul_prod_r[width-1] &&`
258			`!((a[width-1]^b[width-1]) && ~\|mul_prod_r[width-2:0])) \|\|`
259			`\|mul_prod_r[2*width-1:32];`
260
261	502	julius	`ov_we = 1;`
262			`end`
263			`OR1200_ALUOP_MULU : begin
264			`// Overflow on unsigned multiply is simpler.`
265	505	julius	`ovforw = \|mul_prod_r[2*width-1:32];`
266	502	julius	`ov_we = 1;`
267			`end`
268			`endif // `ifdef OR1200_MULT_IMPLEMENTED
269			`ifdef OR1200_DIV_IMPLEMENTED
270			`OR1200_ALUOP_DIVU,
271			`OR1200_ALUOP_DIV: begin
272	505	julius	`// Overflow on divide by zero or -2^(width-1)/-1`
273			`ovforw = div_by_zero \|\| (a==32'h8000_0000 && b==32'hffff_ffff);`
274	502	julius	`ov_we = 1;`
275			`end`
276			`endif
277			`endif // `ifdef OR1200_IMPL_OV
278			`default: begin`
279			`ovforw = 0;`
280			`ov_we = 0;`
281			`end`
282			`endcase // casez (alu_op)`
283
284
285	435	julius	`ifdef OR1200_MULT_IMPLEMENTED
286			`ifdef OR1200_MULT_SERIAL
287
288			always @(`OR1200_RST_EVENT rst or posedge clk)
289			if (rst == `OR1200_RST_VALUE) begin
290			`mul_prod_r <= 64'h0000_0000_0000_0000;`
291			`serial_mul_cnt <= 6'd0;`
292			`mul_free <= 1'b1;`
293
294			`end`
295			`else if (\|serial_mul_cnt) begin`
296			`serial_mul_cnt <= serial_mul_cnt - 6'd1;`
297			`if (mul_prod_r[0])`
298			`mul_prod_r[(width2)-1:width-1] <= mul_prod_r[(width2)-1:width] + x;`
299			`else`
300			`mul_prod_r[(width2)-1:width-1] <= {1'b0,mul_prod_r[(width2)-1:`
301			`width]};`
302			`mul_prod_r[width-2:0] <= mul_prod_r[width-1:1];`
303
304			`end`
305			`else if (alu_op_mul && mul_free) begin`
306			`mul_prod_r <= {32'd0, y};`
307			`mul_free <= 0;`
308			`serial_mul_cnt <= 6'b10_0000;`
309			`end`
310			`else if (!ex_freeze \| mul_free) begin`
311			`mul_free <= 1'b1;`
312			`end`
313
314	501	julius	`assign mul_stall = (\|serial_mul_cnt) \| (alu_op_mul & !ex_freeze_r);`
315	350	julius
316	435	julius	`else
317
318	350	julius	`//`
319			`// Instantiation of the multiplier`
320			`//`
321	435	julius	`ifdef OR1200_ASIC_MULTP2_32X32
322			`or1200_amultp2_32x32 or1200_amultp2_32x32(`
323			`.X(x),`
324			`.Y(y),`
325			`.RST(rst),`
326			`.CLK(clk),`
327			`.P(mul_prod)`
328			`);`
329			`else // OR1200_ASIC_MULTP2_32X32
330			`or1200_gmultp2_32x32 or1200_gmultp2_32x32(`
331			`.X(x),`
332			`.Y(y),`
333			`.RST(rst),`
334			`.CLK(clk),`
335			`.P(mul_prod)`
336			`);`
337			`endif // OR1200_ASIC_MULTP2_32X32
338
339			`//`
340			`// Registered output from the multiplier`
341			`//`
342			always @(`OR1200_RST_EVENT rst or posedge clk)
343			if (rst == `OR1200_RST_VALUE) begin
344			`mul_prod_r <= 64'h0000_0000_0000_0000;`
345			`end`
346			`else begin`
347			`mul_prod_r <= mul_prod[63:0];`
348			`end`
349	350	julius
350	499	julius	`//`
351			`// Generate stall signal during multiplication`
352			`//`
353			always @(`OR1200_RST_EVENT rst or posedge clk)
354			if (rst == `OR1200_RST_VALUE)
355			`mul_stall_count <= 0;`
356			`else if (!(\|mul_stall_count))`
357			`mul_stall_count <= {mul_stall_count[0], alu_op_mul & !ex_freeze_r};`
358			`else`
359			`mul_stall_count <= {mul_stall_count[0],1'b0};`
360
361			`assign mul_stall = (\|mul_stall_count) \|`
362			`(!(\|mul_stall_count) & alu_op_mul & !ex_freeze_r);`
363
364	435	julius	`endif // !`ifdef OR1200_MULT_SERIAL
365
366	350	julius	`else // OR1200_MULT_IMPLEMENTED
367	435	julius	`assign mul_prod = {2*width{1'b0}};`
368			`assign mul_prod_r = {2*width{1'b0}};`
369			`assign mul_stall = 0;`
370	350	julius	`endif // OR1200_MULT_IMPLEMENTED
371
372			`ifdef OR1200_MAC_IMPLEMENTED
373	356	julius
374	435	julius	`//`
375			`// Propagation of l.mac opcode, only register it for one cycle`
376			`//`
377			always @(posedge clk or `OR1200_RST_EVENT rst)
378			if (rst == `OR1200_RST_VALUE)
379			mac_op_r1 <= `OR1200_MACOP_WIDTH'b0;
380			`else`
381			mac_op_r1 <= !ex_freeze_r ? mac_op : `OR1200_MACOP_WIDTH'b0;
382	350	julius
383	435	julius	`//`
384			`// Propagation of l.mac opcode`
385			`//`
386			always @(posedge clk or `OR1200_RST_EVENT rst)
387			if (rst == `OR1200_RST_VALUE)
388			mac_op_r2 <= `OR1200_MACOP_WIDTH'b0;
389			`else`
390			`mac_op_r2 <= mac_op_r1;`
391	350	julius
392	435	julius	`//`
393			`// Propagation of l.mac opcode`
394			`//`
395			always @(posedge clk or `OR1200_RST_EVENT rst)
396			if (rst == `OR1200_RST_VALUE)
397			mac_op_r3 <= `OR1200_MACOP_WIDTH'b0;
398			`else`
399			`mac_op_r3 <= mac_op_r2;`
400	350	julius
401	435	julius	`//`
402			`// Implementation of MAC`
403			`//`
404			always @(`OR1200_RST_EVENT rst or posedge clk)
405			if (rst == `OR1200_RST_VALUE)
406			`mac_r <= 64'h0000_0000_0000_0000;`
407			`ifdef OR1200_MAC_SPR_WE
408			`else if (spr_maclo_we)`
409			`mac_r[31:0] <= spr_dat_i;`
410			`else if (spr_machi_we)`
411			`mac_r[63:32] <= spr_dat_i;`
412			`endif
413			else if (mac_op_r3 == `OR1200_MACOP_MAC)
414			`mac_r <= mac_r + mul_prod_r;`
415			else if (mac_op_r3 == `OR1200_MACOP_MSB)
416			`mac_r <= mac_r - mul_prod_r;`
417			`else if (macrc_op && !ex_freeze)`
418			`mac_r <= 64'h0000_0000_0000_0000;`
419	350	julius
420	435	julius	`//`
421			`// Stall CPU if l.macrc is in ID and MAC still has to process l.mac`
422			`// instructions in EX stage (e.g. inside multiplier)`
423			`// This stall signal is also used by the divider.`
424			`//`
425			always @(`OR1200_RST_EVENT rst or posedge clk)
426			if (rst == `OR1200_RST_VALUE)
427			`mac_stall_r <= 1'b0;`
428			`else`
429			`mac_stall_r <= (\|mac_op \| (\|mac_op_r1) \| (\|mac_op_r2)) &`
430			`(id_macrc_op \| mac_stall_r);`
431	499	julius
432	350	julius	`else // OR1200_MAC_IMPLEMENTED
433	435	julius	`assign mac_stall_r = 1'b0;`
434			`assign mac_r = {2*width{1'b0}};`
435			assign mac_op_r1 = `OR1200_MACOP_WIDTH'b0;
436			assign mac_op_r2 = `OR1200_MACOP_WIDTH'b0;
437			assign mac_op_r3 = `OR1200_MACOP_WIDTH'b0;
438	350	julius	`endif // OR1200_MAC_IMPLEMENTED
439
440	435	julius	`ifdef OR1200_DIV_IMPLEMENTED
441
442			`//`
443			`// Serial division`
444			`//`
445			`ifdef OR1200_DIV_SERIAL
446			`assign div_tmp = div_quot_r[63:32] - y;`
447			always @(`OR1200_RST_EVENT rst or posedge clk)
448			if (rst == `OR1200_RST_VALUE) begin
449			`div_quot_r <= 64'h0000_0000_0000_0000;`
450			`div_free <= 1'b1;`
451			`div_cntr <= 6'b00_0000;`
452			`end`
453	502	julius	`else if (div_by_zero) begin`
454			`div_quot_r <= 64'h0000_0000_0000_0000;`
455			`div_free <= 1'b1;`
456			`div_cntr <= 6'b00_0000;`
457			`end`
458	435	julius	`else if (\|div_cntr) begin`
459			`if (div_tmp[31])`
460			`div_quot_r <= {div_quot_r[62:0], 1'b0};`
461			`else`
462			`div_quot_r <= {div_tmp[30:0], div_quot_r[31:0], 1'b1};`
463			`div_cntr <= div_cntr - 6'd1;`
464			`end`
465			`else if (alu_op_div && div_free) begin`
466			`div_quot_r <= {31'b0, x[31:0], 1'b0};`
467			`div_cntr <= 6'b10_0000;`
468			`div_free <= 1'b0;`
469			`end`
470			`else if (div_free \| !ex_freeze) begin`
471			`div_free <= 1'b1;`
472			`end`
473
474	501	julius	`assign div_stall = (\|div_cntr) \| (!ex_freeze_r & alu_op_div);`
475	435	julius
476
477			`else // !`ifdef OR1200_DIV_SERIAL
478
479			`// Full divider`
480			`// TODO: Perhaps provide module that can be technology dependent.`
481			always @(`OR1200_RST_EVENT rst or posedge clk) begin
482			if (rst == `OR1200_RST_VALUE) begin
483			`div_quot_r <= 32'd0;`
484			`div_quot_generic <= 32'd0;`
485			`end`
486			`else begin`
487			`if (alu_op_udiv & !(\|y)) // unsigned divide by 0 - force to MAX`
488			`div_quot_generic[31:0] <= 32'hffff_ffff;`
489			`else if (alu_op_div)`
490			`div_quot_generic[31:0] <= x / y;`
491			`end`
492
493			`// Add any additional statges of pipelining as required here. Ensure`
494			`// ends with div_quot_r.`
495			`// Then add logic to ensure div_stall stays high for as long as the`
496			`// division should take.`
497
498			`div_quot_r[31:0] <= div_quot_generic;`
499
500			`end`

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [or1200/] [or1200_mult_mac.v] - Blame information for rev 751