Subversion Repositories openrisc

######################################################################

####                                                              ####

####  ORPSoCv2 Testbenches Makefile                               ####

####                                                              ####

####  Description                                                 ####

####  ORPSoCv2 Testbenches Makefile, containing rules for         ####

####  configuring and running different tests on the current      ####

####  ORPSoC(v2) design.                                          ####

####                                                              ####

####  To do:                                                      ####

####                                                              ####

####  Author(s):                                                  ####

####      - Julius Baxter, julius@opencores.org                   ####

####                                                              ####

####                                                              ####

######################################################################

####                                                              ####

#### Copyright (C) 2009,2010 Authors and OPENCORES.ORG            ####

####                                                              ####

#### This source file may be used and distributed without         ####

#### restriction provided that this copyright statement is not    ####

#### removed from the file and that any derivative work contains  ####

#### the original copyright notice and the associated disclaimer. ####

####                                                              ####

#### This source file is free software; you can redistribute it   ####

#### and/or modify it under the terms of the GNU Lesser General   ####

#### Public License as published by the Free Software Foundation; ####

#### either version 2.1 of the License, or (at your option) any   ####

#### later version.                                               ####

####                                                              ####

#### This source is distributed in the hope that it will be       ####

#### useful, but WITHOUT ANY WARRANTY; without even the implied   ####

#### warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ####

#### PURPOSE.  See the GNU Lesser General Public License for more ####

#### details.                                                     ####

####                                                              ####

#### You should have received a copy of the GNU Lesser General    ####

#### Public License along with this source; if not, download it   ####

#### from http://www.opencores.org/lgpl.shtml                     ####

####                                                              ####

######################################################################

# Name of the directory we're currently in

CUR_DIR=$(shell pwd)

# The root path of the whole project

PROJECT_ROOT ?=$(CUR_DIR)/../..

DESIGN_NAME=orpsoc

RTL_TESTBENCH_TOP=$(DESIGN_NAME)_testbench

# Top level files for DUT and testbench

DUT_TOP=$(RTL_VERILOG_DIR)/$(DESIGN_NAME)_top/$(DESIGN_NAME)_top.v

BENCH_TOP=$(BENCH_VERILOG_DIR)/$(DESIGN_NAME)_testbench.v

# Need this for individual test variables to not break

TEST ?= or1200-simple

TESTS ?= or1200-simple \

        or1200-basic \

        or1200-cbasic \

        or1200-dctest \

        or1200-float \

        or1200-mmu  \

        or1200-except \

        or1200-mac \

        or1200-ffl1 \

        or1200-linkregtest \

        or1200-tick \

        or1200-ticksyscall \

        uart-simple

# Gets turned into verilog `define

SIM_TYPE=RTL

# Paths to other important parts of this test suite

RTL_DIR = $(PROJECT_ROOT)/rtl

RTL_VERILOG_DIR = $(RTL_DIR)/verilog

RTL_VERILOG_INCLUDE_DIR = $(RTL_VERILOG_DIR)/include

#RTL_VHDL_DIR = $(RTL_DIR)/vhdl

PROJECT_VERILOG_DEFINES=$(RTL_VERILOG_INCLUDE_DIR)/$(DESIGN_NAME)-defines.v

# Detect technology to use for the simulation

DESIGN_DEFINES=$(shell cat $(PROJECT_VERILOG_DEFINES) | \

        sed s://.*::g | sed s:\`:\#:g | sed 's:^[ ]*::' | \

        awk '{print};/^\#define/{printf "_%s=%s\n",$$2,$$2}' | \

        grep -v PERIOD | cpp -P | sed s:^_::g | sed s:=$$::g )

# Rule to look at what defines are being extracted from main file

print-defines:

        @echo echo; echo "\t### Design defines ###"; echo

        @echo "\tParsing "$(PROJECT_VERILOG_DEFINES)" and exporting:"

        @echo $(DESIGN_DEFINES)

# Simulation directories

SIM_DIR ?=$(PROJECT_ROOT)/sim

SIM_VLT_DIR ?=$(SIM_DIR)/vlt

RTL_SIM_DIR=$(SIM_DIR)

RTL_SIM_RUN_DIR=$(RTL_SIM_DIR)/run

RTL_SIM_BIN_DIR=$(RTL_SIM_DIR)/bin

RTL_SIM_SRC_DIR=$(RTL_SIM_DIR)/src

RTL_SIM_RESULTS_DIR=$(RTL_SIM_DIR)/out

# Testbench paths

BENCH_DIR=$(PROJECT_ROOT)/bench

BENCH_VERILOG_DIR=$(BENCH_DIR)/verilog

BENCH_VERILOG_INCLUDE_DIR=$(BENCH_VERILOG_DIR)/include

#BENCH_VHDL_DIR=$(BENCH_DIR)/vhdl

BENCH_SYSC_DIR=$(BENCH_DIR)/sysc

BENCH_SYSC_SRC_DIR=$(BENCH_SYSC_DIR)/src

BENCH_SYSC_INCLUDE_DIR=$(BENCH_SYSC_DIR)/include

# System software dir

SW_DIR=$(PROJECT_ROOT)/sw

# BootROM code, which generates a verilog array select values

BOOTROM_FILE=bootrom.v

BOOTROM_SW_DIR=$(SW_DIR)/bootrom

BOOTROM_SRC=$(shell ls $(BOOTROM_SW_DIR)/* | grep -v $(BOOTROM_FILE))

BOOTROM_VERILOG=$(BOOTROM_SW_DIR)/$(BOOTROM_FILE)

$(BOOTROM_VERILOG): $(BOOTROM_SRC)

        $(Q)echo; echo "\t### Generating bootup ROM ###"; echo

        $(Q)$(MAKE) -C $(BOOTROM_SW_DIR) $(BOOTROM_FILE)

# Suffix of file to check after each test for the string

TEST_OUT_FILE_SUFFIX=-general.log

TEST_OK_STRING=8000000d

# Dynamically generated verilog file defining configuration for various things

TEST_DEFINES_VLG=test-defines.v

# Set V=1 when calling make to enable verbose output

# mainly for debugging purposes.

ifeq ($(V), 1)

Q=

QUIET=

else

Q ?=@

QUIET=-quiet

endif

# Modelsim variables

MGC_VSIM=vsim

MGC_VLOG_COMP=vlog

MGC_VHDL_COMP=vcom

MODELSIM=modelsim

# Icarus variables

ICARUS_COMPILE=iverilog

ICARUS_RUN=vvp

ICARUS_SCRIPT=icarus.scr

ICARUS_SIM_EXE=vlogsim.elf

ICARUS=icarus

#Default simulator is Icarus Verilog

# Set SIMULATOR=modelsim to use Modelsim

# Set SIMULATOR=ncverilog to use Cadence's NC-Verilog - TODO

# Set SIMULATOR=icarus to use Icarus Verilog (Default)

SIMULATOR ?= $(ICARUS)

# VPI debugging interface variables

VPI_SRC_C_DIR=$(BENCH_VERILOG_DIR)/vpi/c

VPI_SRC_VERILOG_DIR=$(BENCH_VERILOG_DIR)/vpi/verilog

VPI_SRCS=$(shell ls $(VPI_SRC_C_DIR)/*.[ch])

# Modelsim VPI compile variables

MODELTECH_VPILIB=msim_jp_vpi.sl

# Icarus VPI compile target

ICARUS_VPILIB=jp_vpi

#

# Modelsim-specific settings

#

VOPT_ARGS=$(QUIET) -suppress 2241

# If VCD dump is desired, tell Modelsim not to optimise

# away everything.

ifeq ($(VCD), 1)

#VOPT_ARGS=-voptargs="+acc=rnp"

VOPT_ARGS=+acc=rnpqv

endif

# VSIM commands

# Suppressed warnings - 3009: Failed to open $readmemh() file

# Suppressed warnings - 3009: Module 'blah' does not have a `timescale

#                       directive in effect, but previous modules do.

# Suppressed warnings - 8598: Non-positive replication multiplier inside

#                       concat. Replication will be ignored

MGC_VSIM_ARGS=  -suppress 7 -suppress 3009 -suppress 8598 -c $(QUIET) \

                -do "set StdArithNoWarnings 1; run -all; exit"

# Options required when VPI option used

ifeq ($(VPI), 1)

MGC_VPI_LIB=$(VPI_SRC_C_DIR)/$(MODELTECH_VPILIB)

MGC_VSIM_ARGS += -pli $(VPI_SRC_C_DIR)/$(MODELTECH_VPILIB)

ICARUS_VPI_LIB=$(VPI_SRC_C_DIR)/$(ICARUS_VPILIB)

ICARUS_VPI_ARGS=-M$(VPI_SRC_C_DIR) -m$(ICARUS_VPILIB)

endif

# Rule to make the VPI library for Modelsim

$(MGC_VPI_LIB): $(VPI_SRCS)

        $(MAKE) -C $(VPI_SRC_C_DIR) $(MODELTECH_VPILIB)

# Rule to make VPI library for Icarus Verilog

$(ICARUS_VPI_LIB): $(VPI_SRCS)

        $(MAKE) -C $(VPI_SRC_C_DIR) $(ICARUS_VPILIB)

# Manually add the VPI bench verilog path

BENCH_VERILOG_SRC_SUBDIRS += $(VPI_SRC_VERILOG_DIR)

#

# Verilog DUT source variables

#

# A list of paths under rtl/verilog we wish to exclude for module searching

VERILOG_MODULES_EXCLUDE=  include components

VERILOG_MODULES_EXCLUDE_LIST_E=$(shell for exclude in \

                $(VERILOG_MODULES_EXCLUDE); do echo "-e $$exclude"; done)

RTL_VERILOG_MODULES=$(shell ls $(RTL_VERILOG_DIR) | grep -v \

                        $(VERILOG_MODULES_EXCLUDE_LIST_E) )

# Specific files to exclude, currently none.

#VERILOG_EXCLUDE=

#VERILOG_EXCLUDE_LIST_E=$(shell for exclude in $(VERILOG_EXCLUDE); \

                do echo "-e $$exclude"; done)

# List of verilog source files, minus excluded files

#RTL_VERILOG_SRC=$(shell for module in $(RTL_VERILOG_MODULES); do \

        if [ -d $(RTL_VERILOG_DIR)/$$module ]; then \

                ls $(RTL_VERILOG_DIR)/$$module/*.v | grep -v \

                        $(VERILOG_EXCLUDE_LIST_E); \

        fi; done)

# List of verilog source files, ignoring excludes

RTL_VERILOG_SRC=$(shell for module in $(RTL_VERILOG_MODULES); do \

        if [ -d $(RTL_VERILOG_DIR)/$$module ]; then \

                ls $(RTL_VERILOG_DIR)/$$module/*.v; \

        fi; done)

# List of verilog includes

RTL_VERILOG_INCLUDES=$(shell ls $(RTL_VERILOG_INCLUDE_DIR)/*.*)

print-verilog-src:

        @echo echo; echo "\t### Verilog source ###"; echo

        @echo $(RTL_VERILOG_SRC)

# Rules to make RTL we might need

# Expects modules, if they need making, to have their top verilog file to

# correspond to their module name, and the directory should have a make file

# and rule which works for this command.

# Add name of module to this list, currently only does verilog ones.

# Rule 'rtl' is called just before generating DUT modelsim compilation script

RTL_TO_CHECK=

rtl:

        $(Q)for module in $(RTL_TO_CHECK); do \

                $(MAKE) -C $(RTL_VERILOG_DIR)/$$module $$module.v; \

        done

#

# VHDL DUT source variables

#

# VHDL modules

#RTL_VHDL_MODULES=$(shell ls $(RTL_VHDL_DIR))

# VHDL sources

#RTL_VHDL_SRC=$(shell for module in $(RTL_VHDL_MODULES); do \

        if [ -d $(RTL_VHDL_DIR)/$$module ]; then \

                ls $(RTL_VHDL_DIR)/$$module/*.vhd; \

        fi; done)

#print-vhdl-src:

#       @echo echo; echo "\t### VHDL modules and source ###"; echo

#       @echo "modules: "; echo $(RTL_VHDL_MODULES); echo

#       @echo "source: "$(RTL_VHDL_SRC)

# Testbench verilog source

BENCH_VERILOG_SRC=$(shell ls $(BENCH_VERILOG_DIR)/*.v | grep -v \

        $(DESIGN_NAME)_testbench )

print-bench-src:

        $(Q)echo "\tBench verilog source"; \

        echo $(BENCH_VERILOG_SRC)

# Testbench source subdirectory detection

BENCH_VERILOG_SRC_SUBDIRS +=$(shell for file in `ls $(BENCH_VERILOG_DIR)`; do \

        if [ -d $(BENCH_VERILOG_DIR)/$$file ]; then \

                echo $(BENCH_VERILOG_DIR)/$$file; \

        fi; done)

# Compile script generation rules:

modelsim_dut.scr: rtl $(RTL_VERILOG_SRC) $(RTL_VERILOG_INCLUDES) \

                        $(BOOTROM_VERILOG)

        $(Q)echo "+incdir+"$(RTL_VERILOG_INCLUDE_DIR) > $@;

        $(Q)echo "+incdir+"$(RTL_SIM_SRC_DIR) >> $@;

        $(Q)echo "+incdir+"$(BOOTROM_SW_DIR) >> $@;

        $(Q)echo "+incdir+"$(BENCH_VERILOG_INCLUDE_DIR) >> $@;

        $(Q)echo "+libext+.v" >> $@;

        $(Q)for module in $(RTL_VERILOG_MODULES); do \

                if [ -d $(RTL_VERILOG_DIR)/$$module ]; then \

                        echo "-y " $(RTL_VERILOG_DIR)/$$module >> $@; \

                fi; done

        $(Q)echo >> $@

modelsim_bench.scr: $(BENCH_VERILOG_SRC)

        $(Q)echo "+incdir+"$(BENCH_VERILOG_DIR) > $@;

        $(Q)for path in $(BENCH_VERILOG_SRC_SUBDIRS); do \

                echo "+incdir+"$$path >> $@; \

        done

        $(Q)for path in $(BENCH_VERILOG_SRC_SUBDIRS); do \

                echo "-y "$$path >> $@; \

        done

        $(Q)echo "+incdir+"$(RTL_VERILOG_INCLUDE_DIR) >> $@;

        $(Q)echo "+incdir+"$(RTL_SIM_SRC_DIR) >> $@;

        $(Q)echo "+libext+.v" >> $@;

        $(Q)echo "-y" $(RTL_SIM_SRC_DIR) >> $@;

        $(Q)for vsrc in $(BENCH_VERILOG_SRC); do echo $$vsrc >> $@; done

        $(Q)echo >> $@

# Compile DUT into "work" library

work: modelsim_dut.scr #$(RTL_VHDL_SRC)

        $(Q)if [ ! -e $@ ]; then vlib $@; fi

#       $(Q)echo; echo "\t### Compiling VHDL design library ###"; echo

#       $(Q)vcom -93 $(QUIET) $(RTL_VHDL_SRC)

        $(Q)echo; echo "\t### Compiling Verilog design library ###"; echo

        $(Q)vlog $(QUIET) -f $< $(DUT_TOP)

# Single compile rule

.PHONY : $(MODELSIM)

$(MODELSIM): modelsim_bench.scr $(TEST_DEFINES_VLG) $(MGC_VPI_LIB) work

        $(Q)echo; echo "\t### Compiling testbench ###"; echo

        $(Q)vlog $(QUIET) -nologo -incr $(BENCH_TOP) -f $<

        $(Q)vopt $(QUIET) $(RTL_TESTBENCH_TOP) $(VOPT_ARGS) -o tb

        $(Q)echo; echo "\t### Launching simulation ###"; echo

        $(Q)vsim $(MGC_VSIM_ARGS) tb

#

# Icarus Verilog simulator build and run rules

#

.PHONY: $(ICARUS_SCRIPT)

$(ICARUS_SCRIPT):  $(RTL_VERILOG_SRC) $(RTL_VERILOG_INCLUDES) \

                $(BOOTROM_VERILOG) $(BENCH_VERILOG_SRC)

        $(Q)echo "# Icarus Verilog simulation script" > $@

        $(Q)echo "# Auto generated. Any alterations will be written over!" >> $@

        $(Q)echo "+incdir+"$(RTL_VERILOG_INCLUDE_DIR) > $@;

        $(Q)echo "+incdir+"$(RTL_SIM_SRC_DIR) >> $@;

        $(Q)echo "+incdir+"$(BENCH_VERILOG_DIR) >> $@;

        $(Q)echo "+incdir+"$(BOOTROM_SW_DIR) >> $@;

        $(Q)for path in $(BENCH_VERILOG_SRC_SUBDIRS); do \

                echo "+incdir+"$$path >> $@; \

        done

        $(Q)for path in $(BENCH_VERILOG_SRC_SUBDIRS); do \

                echo "-y "$$path >> $@; \

        done

        $(Q)for module in $(RTL_VERILOG_MODULES); do \

                echo "-y " $(RTL_VERILOG_DIR)/$$module >> $@; \

        done

        $(Q)echo "-y" $(RTL_SIM_SRC_DIR) >> $@;

        $(Q)echo "-y" $(BENCH_VERILOG_DIR) >> $@;

        $(Q)echo $(BENCH_TOP) >> $@;

        $(Q) echo >> $@

# Icarus design compilation rule

$(ICARUS_SIM_EXE): $(ICARUS_SCRIPT) $(TEST_DEFINES_VLG)

        $(Q)echo; echo "\t### Compiling ###"; echo

        $(Q) $(ICARUS_COMPILE) -s$(RTL_TESTBENCH_TOP) -c $< -o $@

# Icarus simulation run rule

$(ICARUS): $(ICARUS_SIM_EXE) $(ICARUS_VPI_LIB)

        $(Q)echo; echo "\t### Launching simulation ###"; echo

        $(Q) $(ICARUS_RUN) $(ICARUS_VPI_ARGS) -l ../out/$(ICARUS_RUN).log $<

.PHONY: rtl-test

rtl-test: clean-sim-test-sw sw-vmem clean-test-defines $(TEST_DEFINES_VLG) \

        $(SIMULATOR)

# Run an RTL test followed by checking of generated results

rtl-test-with-check: rtl-test

        $(Q)$(MAKE) check-test-log; \

        if [ $$? -ne 0 ]; then \

                echo; echo "\t### "$(TEST)" test FAIL ###"; echo; \

        else \

                echo; echo "\t### "$(TEST)" test OK ###"; echo; \

        fi

# Do check, don't print anything out

rtl-test-with-check-no-print: rtl-test check-test-log

# Main RTL test loop

rtl-tests:

        $(Q)for test in $(TESTS); do \

                export TEST=$$test; \

                $(MAKE) rtl-test-with-check-no-print; \

                if [ $$? -ne 0 ]; then break; fi; \

                echo; echo "\t### $$test test OK ###"; echo; \

        done

.PHONY: check-test-log

check-test-log:

        $(Q)echo "#!/bin/bash" > $@

        $(Q)echo "function check-test-log { if [ \`grep -c -i "$(TEST_OK_STRING)" "$(RTL_SIM_RESULTS_DIR)"/"$(TEST)$(TEST_OUT_FILE_SUFFIX)"\` -gt 0 ]; then return 0; else return 1; fi; }" >> $@

        $(Q)echo "check-test-log" >> $@

        $(Q)chmod +x $@

        $(Q) echo; echo "\t### Checking simulation results for "$(TEST)" test ###"; echo;

        $(Q)./$@

# Include the test-defines.v generation rule

include ../bin/definesgen.inc

#

# Software make rules (called recursively)

#

# Path for the current test

TEST_SW_DIR=$(SW_DIR)/tests/$(shell echo $(TEST) | cut -d "-" -f 1)/sim

# This file name corresponds to the VMEM file the RAM models will attempt to

# load via $readmemh().

SIM_VMEM_IMAGE ?=sram.vmem

ifeq ($(USER_ELF),)

ELF_FILE=$(TEST_SW_DIR)/$(TEST).elf

else

ELF_FILE=$(USER_ELF)

ELF_FILE_NOTDIR=$(notdir $(USER_ELF))

ELF_FILE_NOTDIR_BASENAME=$(basename $(ELF_FILE_NOTDIR))

endif

# Rules allowing user to specify a pre-existing VMEM file to load into the

# simulation, instead of compiling a test.

ifeq ($(USER_VMEM),)

VMEM_FILE=$(TEST_SW_DIR)/$(TEST).vmem

.PHONY: $(VMEM_FILE)

# If USER_ELF was specified, then we need a slightly different way of

# generating the VMEM file from it than a usual test

ifeq ($(USER_ELF),)

$(SIM_VMEM_IMAGE): $(VMEM_FILE)

        $(Q)if [ -L $@ ]; then unlink $@; fi

        $(Q)if [ -e $@ ]; then rm $@; fi

        $(Q)ln -s $< $@

else

$(SIM_VMEM_IMAGE): $(USER_ELF)

        $(Q)$(MAKE) -C $(SW_DIR)/lib \

        USER_ELF_BIN=`pwd`/$(ELF_FILE_NOTDIR_BASENAME).bin \

        USER_ELF_VMEM=`pwd`/$(ELF_FILE_NOTDIR_BASENAME).vmem \

        gen-user-elf-vmem

        $(Q)cp -v $(ELF_FILE_NOTDIR_BASENAME).vmem $@

TEST=$(ELF_FILE_NOTDIR_BASENAME)

endif

else

VMEM_FILE=$(USER_VMEM)

USER_VMEM_NOTDIR=$(notdir $(USER_VMEM))

TEST=$(basename $(USER_VMEM_NOTDIR))

$(SIM_VMEM_IMAGE): $(VMEM_FILE)

        cp -v $< $@

endif

.PHONY : sw-vmem sw-elf

sw-vmem: $(SIM_VMEM_IMAGE)

$(TEST_SW_DIR)/$(TEST).vmem:

        $(Q) echo; echo "\t### Compiling software ###"; echo;

        $(Q)$(MAKE) -C $(TEST_SW_DIR) $(TEST).vmem

# Compile ELF and copy it here

sw-elf: $(ELF_FILE)

        $(Q)cp -v $< .

$(TEST_SW_DIR)/$(TEST).elf:

        $(Q) echo; echo "\t### Compiling software ###"; echo;

        $(Q)$(MAKE) -C $(TEST_SW_DIR) $(TEST).elf

# Rule to force generation of the processed orpsoc-defines.h file

processed-verilog-headers-in-c-for-vlt:

        $(Q)$(MAKE) -C $(SW_DIR)/lib processed-verilog-headers

# Now copy the file into the Verilated model build path

        $(Q)cp $(SW_DIR)/lib/include/orpsoc-defines.h $(SIM_VLT_DIR)

# Create test software disassembly

sw-dis: $(TEST_SW_DIR)/$(TEST).dis

        $(Q)cp -v $< .

$(TEST_SW_DIR)/$(TEST).dis:

        $(Q)$(MAKE) -C $(TEST_SW_DIR) $(TEST).dis

#

# Cleaning rules

#

clean: clean-sim clean-sim-test-sw clean-bootrom clean-vlt clean-out clean-sw

clean-sim:

        $(Q) echo; echo "\t### Cleaning simulation run directory ###"; echo;

        $(Q)rm -rf *.* lib_* work transcript check-test-log

        $(Q) if [ -e $(VPI_SRC_C_DIR) ]; then \

                $(MAKE) -C $(VPI_SRC_C_DIR) clean; \

        fi

clean-bootrom:

        $(MAKE) -C $(BOOTROM_SW_DIR) clean

clean-out:

        $(Q)rm -rf $(RTL_SIM_RESULTS_DIR)/*.*

# Clean away verilator build path and objects in SystemC path

clean-vlt:

        $(Q)rm -rf $(SIM_VLT_DIR)

        $(Q)$(MAKE) -C $(BENCH_SYSC_SRC_DIR) -f \

                $(BENCH_SYSC_SRC_DIR)/Modules.make clean

clean-test-defines:

        $(Q)rm -f $(TEST_DEFINES_VLG)

clean-sim-test-sw:

        $(Q)if [ -L $(SIM_VMEM_IMAGE) ]; then unlink $(SIM_VMEM_IMAGE); fi

clean-sw:

        $(Q) echo; echo "\t### Cleaning simulation sw directories ###"; echo;

        $(Q) $(MAKE) -C $(SW_DIR)/lib distclean

clean-rtl:

        $(Q) echo; echo "\t### Cleaning generated verilog RTL ###"; echo;

        for module in $(RTL_TO_CHECK); do \

                $(MAKE) -C $(RTL_VERILOG_DIR)/$$module clean; \

        done

# Removes any checked out RTL

distclean: clean

        $(Q) echo; echo "\t### Cleaning generated verilog RTL ###"; echo;

        $(Q)for module in $(RTL_TO_CHECK); do \

                $(MAKE) -C $(RTL_VERILOG_DIR)/$$module distclean; \

        done

################################################################################

# Verilator model build rules

################################################################################

VLT_EXE=Vorpsoc_top

VLT_SCRIPT=verilator.scr

# Script for Verilator

$(SIM_VLT_DIR)/$(VLT_SCRIPT): $(RTL_VERILOG_SRC) $(RTL_VERILOG_INCLUDES) \

                                $(BOOTROM_VERILOG)

        $(Q)echo "\tGenerating Verilator script"

        $(Q)echo "# Verilator sources script" > $@

        $(Q)echo "# Auto generated. Any alterations will be written over!" >> $@

        $(Q)echo "+incdir+"$(RTL_VERILOG_INCLUDE_DIR) > $@;

        $(Q)echo "+incdir+"$(BOOTROM_SW_DIR) >> $@;

        $(Q)echo "+incdir+"$(SIM_RUN_DIR) >> $@;

        $(Q)for module in $(RTL_VERILOG_MODULES); do \

                echo "-y " $(RTL_VERILOG_DIR)/$$module >> $@; \

        done

        $(Q)echo $(DUT_TOP) >> $@;

        $(Q) echo >> $@

SYSC_LIB_ARCH_DIR=$(shell ls $$SYSTEMC | grep "lib-")

# List of System C models - use this list to link the sources into the Verilator

# build directory

SYSC_MODELS=OrpsocAccess MemoryLoad

ifdef VLT_LINT

VLT_FLAGS +=--lint-only

endif

ifdef VLT_DEBUG

VLT_DEBUG_COMPILE_FLAGS = -g

# Enabling the following generates a TON of debugging

# when running verilator. Not so helpful.

#VLT_FLAGS = --debug --dump-tree

VLT_SYSC_DEBUG_DEFINE = VLT_DEBUG=1

endif

# This will build a verilator model that will generate profiling information

# suitable for gprof

# Run it through gprof after exection with: gprof Vorpsoc_top > gprof.out

# then run this through the Verilator tool with:

# verilator_profcfunc gprof.out > vprof.out

ifdef VLT_EXECUTION_PROFILE_BUILD

VLT_CPPFLAGS +=-g -pg

# Maybe add these to VLT_CPPFLAGS: -ftest-coverage -fprofile-arcs

VLT_FLAGS +=-profile-cfuncs

endif

# If set on the command line we build the cycle accurate model which will

# generate verilator-specific profiling information. This is useful for

# checking the efficiency of the model - not really useful for checking code

# or the function of the model.

ifdef VLT_DO_PERFORMANCE_PROFILE_BUILD

VLT_CPPFLAGS += -fprofile-generate -fbranch-probabilities -fvpt \

                -funroll-loops -fpeel-loops -ftracer

else

VLT_CPPFLAGS +=-fprofile-use -Wcoverage-mismatch

endif

# Set VLT_IN_GDB=1 when making if going to run the cycle accurate model

# executable in GDB.

ifdef VLT_IN_GDB

VLT_CPPFLAGS +=-g -O0

else

# The default optimisation flag applied to all of the cycle accurate model files

VLT_CPPFLAGS +=-O3

endif

# VCD Enabled by default when building, enable it at runtime

VLT_FLAGS +=-trace

TRACE_FLAGS=-DVM_TRACE=1 -I${SYSTEMPERL}/src

# Verilator tuning

# Inlining:

VLT_FLAGS +=--inline-mult 1

# Optimisation option for Verilator scripts

VLT_FLAGS +=-O3

# X-assign - at reset, all signals are set to random values, helps find

# reset bugs

VLT_FLAGS +=-x-assign unique

VLT_TRACEOBJ = verilated_vcd_c

# This is the list of extra models we'll issue make commands for

# Included is the SystemPerl trace model

SYSC_MODELS_BUILD=$(SYSC_MODELS) $(VLT_TRACEOBJ)

# List of sources for rule sensitivity

SYSC_MODEL_SOURCES=$(shell ls $(BENCH_SYSC_SRC_DIR)/*.cpp)

SYSC_MODEL_SOURCES +=$(shell ls $(BENCH_SYSC_INCLUDE_DIR)/*.h)

VLT_MODULES_OBJS=$(shell for mod in $(SYSC_MODELS_BUILD); do \

                echo $(SIM_VLT_DIR)/$$mod.o; \

        done)

VLT_MODEL_LINKS=$(shell for SYSCMODEL in $(SYSC_MODELS); do \

                echo $(SIM_VLT_DIR)/$$SYSCMODEL.cpp; \

        done)

# Make Verilator build path if it doesn't exist

$(SIM_VLT_DIR):

        mkdir -p $@

# Dummy files the RTL requires: timescale.v

DUMMY_FILES_FOR_VLT=$(SIM_VLT_DIR)/timescale.v

$(DUMMY_FILES_FOR_VLT):

        $(Q)for file in $@; do if [ ! -e $$file ]; then touch $$file; fi; done

build-vlt: rtl $(SIM_VLT_DIR) $(DUMMY_FILES_FOR_VLT) $(VLT_MODEL_LINKS) \

        processed-verilog-headers-in-c-for-vlt  $(SIM_VLT_DIR)/$(VLT_EXE)

# Main Cycle-accurate build rule

prepare-vlt: build-vlt

        @echo;echo "\tCycle-accurate model compiled successfully"

        @echo;echo "\tRun the executable with the -h option for usage instructions:";echo

        $(SIM_VLT_DIR)/$(VLT_EXE) -h

        @echo;echo

$(SIM_VLT_DIR)/$(VLT_EXE): $(SIM_VLT_DIR)/lib$(VLT_EXE).a \

                                $(SIM_VLT_DIR)/OrpsocMain.o

# Final linking of the simulation executable. Order of libraries here is

# important!

        $(Q)echo; echo "\tGenerating simulation executable"; echo

        $(Q)cd $(SIM_VLT_DIR) && \

                g++ $(VLT_DEBUG_COMPILE_FLAGS) \

                $(VLT_CPPFLAGS) -I$(BENCH_SYSC_INCLUDE_DIR) -I$(SIM_VLT_DIR) \

                -I$(VERILATOR_ROOT)/include -I$(SYSTEMC)/include -o $(VLT_EXE) \

                -L. -L$(BENCH_SYSC_SRC_DIR) -L$(SYSTEMC)/$(SYSC_LIB_ARCH_DIR) \

                OrpsocMain.o -l$(VLT_EXE) -lmodules -lsystemc

# Now compile the top level systemC "testbench" module from the systemC source

# path

$(SIM_VLT_DIR)/OrpsocMain.o: $(BENCH_SYSC_SRC_DIR)/OrpsocMain.cpp

        @echo; echo "\tCompiling top level SystemC testbench"; echo

        cd $(SIM_VLT_DIR) && \

        g++ $(VLT_DEBUG_COMPILE_FLAGS) $(VLT_CPPFLAGS) $(TRACE_FLAGS) \

        -I$(BENCH_SYSC_INCLUDE_DIR) -I$(SIM_VLT_DIR) \

        -I$(VERILATOR_ROOT)/include -I$(SYSTEMC)/include -c \

        $(BENCH_SYSC_SRC_DIR)/OrpsocMain.cpp

$(SIM_VLT_DIR)/lib$(VLT_EXE).a: $(SIM_VLT_DIR)/$(VLT_EXE)__ALL.a \

                $(VLT_MODULES_OBJS) $(SIM_VLT_DIR)/verilated.o

# Now archive all of the libraries from verilator witht he other modules we

# might have

        @echo; echo "\tArchiving libraries into lib"$(VLT_EXE)".a"; echo

        $(Q)cd $(SIM_VLT_DIR) && \

        cp $(VLT_EXE)__ALL.a lib$(VLT_EXE).a && \

        ar rcs lib$(VLT_EXE).a verilated.o; \

        for SYSCMODEL in $(SYSC_MODELS_BUILD); do \

                ar rcs lib$(VLT_EXE).a $$SYSCMODEL.o; \

        done

$(SIM_VLT_DIR)/verilated.o: $(SYSC_MODEL_SOURCES)

        @echo; echo "\tCompiling verilated.o"; echo

        $(Q)cd $(SIM_VLT_DIR) && \

        export CXXFLAGS=$(VLT_DEBUG_COMPILE_FLAGS); \

        export USER_CPPFLAGS="$(VLT_CPPFLAGS)"; \

        export USER_LDDFLAGS="$(VLT_CPPFLAGS)"; \

        $(MAKE) -f $(VLT_EXE).mk verilated.o

print-sysmod-objs:

        $(Q)echo $(VLT_MODULES_OBJS):

$(VLT_MODULES_OBJS):

# Compile the module files

        @echo; echo "\tCompiling SystemC models"

        $(Q)cd $(SIM_VLT_DIR) && \

        for SYSCMODEL in $(SYSC_MODELS_BUILD); do \

                echo;echo "\t$$SYSCMODEL"; echo; \

                export CXXFLAGS=$(VLT_DEBUG_COMPILE_FLAGS); \

                export USER_CPPFLAGS="$(VLT_CPPFLAGS) -I$(BENCH_SYSC_INCLUDE_DIR)"; \

                export USER_LDDFLAGS="$(VLT_CPPFLAGS)"; \

                 $(MAKE) -f $(VLT_EXE).mk $$SYSCMODEL.o; \

        done

$(SIM_VLT_DIR)/$(VLT_EXE)__ALL.a: $(SIM_VLT_DIR)/$(VLT_EXE).mk \

                $(SYSC_MODEL_SOURCES)

        @echo; echo "\tCompiling main design"; echo

        $(Q)cd $(SIM_VLT_DIR) && \

        export USER_CPPFLAGS="$(VLT_CPPFLAGS)"; \

        export USER_LDDFLAGS="$(VLT_CPPFLAGS)"; \

        $(MAKE) -f $(VLT_EXE).mk $(VLT_EXE)__ALL.a

$(SIM_VLT_DIR)/$(VLT_EXE).mk: $(SIM_VLT_DIR)/$(VLT_SCRIPT) \

                $(BENCH_SYSC_SRC_DIR)/libmodules.a

# Now call verilator to generate the .mk files

        $(Q)echo; echo "\tGenerating makefiles with Verilator"; echo

        $(Q)cd $(SIM_VLT_DIR) && \

        verilator -language 1364-2001 --top-module orpsoc_top -Mdir . -sc \

        $(VLT_FLAGS) -I$(BENCH_SYSC_INCLUDE_DIR) -I$(BENCH_SYSC_SRC_DIR) \

        -f $(SIM_VLT_DIR)/$(VLT_SCRIPT)

# SystemC modules library

$(BENCH_SYSC_SRC_DIR)/libmodules.a:

        @echo; echo "\tCompiling SystemC modules"; echo

        $(Q)export VLT_CPPFLAGS="$(VLT_CPPFLAGS)"; \

        $(MAKE) -C $(BENCH_SYSC_SRC_DIR) \

        -f $(BENCH_SYSC_SRC_DIR)/Modules.make $(VLT_SYSC_DEBUG_DEFINE)

print-vlt-model-link-paths:

        $(Q)echo $(VLT_MODEL_LINKS)

$(VLT_MODEL_LINKS):

# Link all the required system C model files into the verilator work dir

        $(Q)for SYSCMODEL in $(SYSC_MODELS); do \

                if [ ! -e $(SIM_VLT_DIR)/$$SYSCMODEL.cpp ]; then \

                echo \

        "\tLinking SystemC model $$SYSCMODEL  Verilator model build path"; \

                        ln -s $(BENCH_SYSC_SRC_DIR)/$$SYSCMODEL.cpp \

                                $(SIM_VLT_DIR)/$$SYSCMODEL.cpp; \

                        ln -s $(BENCH_SYSC_INCLUDE_DIR)/$$SYSCMODEL.h \

                                $(SIM_VLT_DIR)/$$SYSCMODEL.h; \

                fi; \

        done

################################################################################

# Verilator model test rules

################################################################################

vlt-test: build-vlt clean-sim-test-sw sw-vmem

        $(SIM_VLT_DIR)/$(VLT_EXE) $(TEST)

vlt-tests:

        $(Q)for test in $(TESTS); do \

                export TEST=$$test; \

                $(MAKE) vlt-test; \

                if [ $$? -ne 0 ]; then break; fi; \

                echo; echo "\t### $$test test OK ###"; echo; \

        done

###############################################################################

# Verilator profiled model build rules

###############################################################################

# To run this, first run a "make prepare-vlt-profiled"

# This new make target copies athe results of the profiling back to the right

# paths before we create everything again

###############################################################################

.PHONY: prepare-vlt-profiled

prepare-vlt-profiled: $(SIM_VLT_DIR)/OrpsocMain.gcda \

        clean-vlt-after-profile-run \

        rtl $(SIM_VLT_DIR) $(DUMMY_FILES_FOR_VLT) $(VLT_MODEL_LINKS) \

        $(SIM_VLT_DIR)/$(VLT_EXE)

$(SIM_VLT_DIR)/OrpsocMain.gcda: $(SIM_VLT_DIR)/$(VLT_EXE)-for-profiling

        $(MAKE) -C $(SW_DIR)/apps/dhry dhry.elf NUM_RUNS=5000

        $(SIM_VLT_DIR)/$(VLT_EXE) -f $(SW_DIR)/apps/dhry/dhry.elf

# Clean all compiled things

clean-vlt-after-profile-run:

        $(Q)echo "\tCleaning away compiled cycle-accurate files"

        $(Q)rm -f $(SIM_VLT_DIR)/*.[oa] $(SIM_VLT_DIR)/$(VLT_EXE)

        $(Q)rm -f $(BENCH_SYSC_SRC_DIR)/*.[oa]

#.PHONY: $(SIM_VLT_DIR)/$(VLT_EXE)-for-profiling

$(SIM_VLT_DIR)/$(VLT_EXE)-for-profiling:

        $(MAKE) build-vlt VLT_DO_PERFORMANCE_PROFILE_BUILD=1

.PHONY: vlt-restore-profileoutput

vlt-restore-profileoutput:

        @echo;echo "\tRestoring profiling outputs"; echo

        $(Q)mkdir -p ../vlt

        $(Q)cp /tmp/*.gc* $(SIM_VLT_DIR)

        $(Q)cp /tmp/*.gc* $(BENCH_SYSC_SRC_DIR)

lint-vlt: $(SIM_VLT_DIR) rtl $(DUMMY_FILES_FOR_VLT) $(SIM_VLT_DIR)/$(VLT_SCRIPT)

        $(Q)echo; echo "\tLinting design with Verilator"; echo

        $(Q)cd $(SIM_VLT_DIR) && \

        verilator -language 1364-2001 --top-module orpsoc_top --lint-only \

        -Mdir . -sc $(VLT_FLAGS) -I$(BENCH_SYSC_INCLUDE_DIR) \

        -I$(BENCH_SYSC_SRC_DIR) -f $(SIM_VLT_DIR)/$(VLT_SCRIPT)

################################################################################

# Architectural simulator test rules

################################################################################

ARCH_SIM_EXE ?=or32-elf-sim

ARCH_SIM_CFG ?= ../bin/refdesign-or1ksim.cfg

ARCH_SIM_OPTS ?= -q

.PHONY: rtl-test

sim-test: clean-sim-test-sw sw-elf

        $(Q)echo; echo "\t### Launching simulation ###"; echo

        $(Q)$(ARCH_SIM_EXE) $(ARCH_SIM_OPTS) -f $(ARCH_SIM_CFG) $(TEST).elf > \

        $(RTL_SIM_RESULTS_DIR)/$(TEST)$(TEST_OUT_FILE_SUFFIX)

# Run tests in simulation, check output

sim-test-with-check: sim-test check-test-log

# Main architectural simulations test loop

sim-tests:

        $(Q)for test in $(TESTS); do \

                export TEST=$$test; \

                $(MAKE) sim-test-with-check; \

                if [ $$? -ne 0 ]; then break; fi; \

                echo; echo "\t### $$test test OK ###"; echo; \

        done