Subversion Repositories openrisc_2011-10-31

######################################################################

####                                                              ####

####  ORPSoCv2 Testbenches Makefile                               ####

####                                                              ####

####  Description                                                 ####

####  ORPSoCv2 Testbenches Makefile, containing rules for         ####

####  configuring and running different tests on the current      ####

####  ORPSoC(v2) design.                                          ####

####                                                              ####

####  To do:                                                      ####

####    * Arrange verilator make rules so that the whole thing    ####

####      isn't recompiled when a single SystemC module is        ####

####      updated.                                                ####

####    * Test if each software test file gets made properly      ####

####      before it's run in whatever model we're using           ####

####    * Expand software test-suite (uClibc, ecos tests, LTP?)   ####

####                                                              ####

####  Author(s):                                                  ####

####      - jb, jb@orsoc.se                                       ####

####                                                              ####

####                                                              ####

######################################################################

####                                                              ####

#### Copyright (C) 2009 Authors and OPENCORES.ORG                 ####

####                                                              ####

#### This source file may be used and distributed without         ####

#### restriction provided that this copyright statement is not    ####

#### removed from the file and that any derivative work contains  ####

#### the original copyright notice and the associated disclaimer. ####

####                                                              ####

#### This source file is free software; you can redistribute it   ####

#### and/or modify it under the terms of the GNU Lesser General   ####

#### Public License as published by the Free Software Foundation; ####

#### either version 2.1 of the License, or (at your option) any   ####

#### later version.                                               ####

####                                                              ####

#### This source is distributed in the hope that it will be       ####

#### useful, but WITHOUT ANY WARRANTY; without even the implied   ####

#### warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ####

#### PURPOSE.  See the GNU Lesser General Public License for more ####

#### details.                                                     ####

####                                                              ####

#### You should have received a copy of the GNU Lesser General    ####

#### Public License along with this source; if not, download it   ####

#### from http://www.opencores.org/lgpl.shtml                     ####

####                                                              ####

######################################################################

# Usage:

#

#       make rtl-tests

#

#       Run the software tests in the RTL model of the ORPSoC being

#       simulated with an event-driven simulator like Icarus. Also

#       possible to use Cadence's Verilog simulators with the

#       "rtl-nc-tests" target.

#

#       make vlt-tests

#

#       Run all the software tests in the RTL model which has been

#       converted into a cycle-accurate SystemC model with Verilator.

#

#       make sim-tests

#

#       Run all the software tests in the architectural simulator

#

# Simulation results:

#

# The results and output of the event-driven simulations are in the

# results path, in parallel to the simulation run and bin paths.

# Specific tests:

#

# To run an individual test, specify it in the variable TESTS when

# calling make, eg:

#

#        make rtl-tests TESTS="mmu-nocache mul-idcd-O2"

# UART printf:

#

# It is possible to enable printf to the console via the UART when

# running the event-driven simulators. To do this define UART_PRINTF=1

# when calling make. The SystemC cycle-acccurate model uses this by

# default.

# Also note when switching between runs with and without UART printf

# enabled, run a clean-sw so the library files are recompiled when

# the tests are run - this is not done automatically.

# VCDs:

#

# VCD (value change dumps, usable in a waveform viewer, such as gtkwave

# to inspect the internals of the system graphically) files can be

# generated by defining a variable VCD, eg.

#

#       make rtl-tests VCD=1

#

# and a dump file will be created in the simulation results directory,

# and named according to the test run which generated it. This is

# possible for both event-driven and cycle-accurate simulations.

# However the cycle-accurate

# NO_SIM_LOGGING:

#

# It is possible to speed up the event-driven simulation slightly by

# disabling log output of the processor's state to files by defining

# NO_SIM_LOGGING, eg:

#

#       make rtl-tests TESTS=except-icdc NO_SIM_LOGGING=1

#

# Cleaning:

# A simple "make clean" cleans everything - software and all temporary

# simulation files and directories. To clean just the software run:

#

#       make clean-sw

#

# and to clean just the temporary simulation files (including VCDs,

# results logs - everything under, and including, sim/results/, run

#

#       make clean-sim

#

# Note:

#

# The way each of the test loops is written is probably a bit overly complex

# but this is to save maintaining, and calling, multiple files.

#

# Model configuration:

#

# Currently, the ORPSoCv2, by default, contains an internal SRAM (configurable

# size - check the defparam in rtl/verilog/orpsoc_top.v), standard OR1200 (check

# the config in rtl/verilog/or1200_defines.v) and UART.

# Switches can be passed to enable certain parts of the design if testing with

# these is desired.

#

# SDRAM and controller

#

# To enable the use of SDRAM, define USE_SDRAM when calling the sim -this

# only has an effect in the event-driven simulators as the external SDRAM model

# is not availble in SystemC format. eg:

#

#       make rtl-tests USE_SDRAM=1

#

# This not only enables SDRAM but also enables the booting from external SPI

# interfaced flash memory. This causes significant increase in the time taken

# for simulation as the program to test is first loaded out of SPI flash memory

# and into SDRAM before it is executed. Although this more closely mimics the

# behaviour of the hardware, for simulation purposes it is purely time-consuming

# however it may be useful to track down any problems with this boot-loading

# process. Therefore, becuase it enables SDRAM memory, ir also enables the flash

# memory model and SPI controller inside ORPSoC.

#

# Ethernet

#

# Ethernet is disabled by default. This is due to the fact that it is not

# supported in the verilator/systemC model. Also, there is currently no software

# which tests it in any meaningful way.

#

#

# Event-driven simulation compilation

#

# The way the event-driven simulations are compiled is simply using the

# configuration script file in this directory, currently called icarus.scr -

# however it is first processesed to replace the variables, beginning with $'s,

# with the appropriate paths. Instead of naming each file to be compiled, the

# paths to be searched for each module are instead defined ( -y paths), and

# only the toplevel testbench and library source files are explicitly named.

# This simplifies the script, and also requires that the name of each verilog

# source file is the same as the module it contains (a good convention

# regardless.) In addition to the script/command file, defines are passed to

# the compiler via the command line in the EVENT_SIM_FLAGS variable.

# Additionally, a source file, test_define.v, is created with  some defines

# that cannot be passed to the compiled reliably (there are differences between

# the way, for instance, icarus and ncverilog parse strings +define+'d on the

# command line). This file is then included at the appropriate places.

# It is probably not ideal that the entire design be re-compiled for each test,

# but currently the design is small enough so that this doesn't cause a

# significant overhead, unlike the cycle-accurate model compile time.

#

#

# SystemC cycle-accurate model compilation

#

# A new addition to ORPSoC v2 is the cycle-accurate model. The primary enabler

# behind this is verilator, which processes the RTL sources and generates a c++

# description of the system. This c++ description is then compiled with a

# SystemC wrapper. Finally a top-level SystemC testbench instantiates the

# model, as well as any other modules - in this case a reset generation, UART

# decoder, and monitor module are included at the top level. These additional

# modules and models are written in SystemC and compiled all together with the

# cycle-accurate ORPSoC model to create the simulation executable. Finally this

# executable is run and should be a cycle-representation of the system. VCDs

# can be generated if enabled. The compiled mentioned above is all done with

# the GNU c++ compiler, g++.

# The compilation process is a little more tricky than a typical even-driven

# simulator. It proceeds basically by generating the makefiles for compiling

# the design with verilator, running these makes which produces a library

# containing the cycle-accurate ORPSoC design, compiling the additional

# top-level, and testbench, systemC models into a library, and then linking it

# all together into the simulation executable.

# The major advantage of the cycle-accurate model is that it is quicker, in

# terms of simulated cycles/second, when compared with event-driven simulators.

# It is, of course, less accurate in that it cannot model propegation delays.

# However this is usually not an issue for simulating a design which is known

# to synthesize and run OK. It is very useful for running complex software,

# such as the linux kernel and real-time OS applications, which generally

# require long simulation times.

# Currently the cycle-accurate model being used doesn't contain much more than

# the processor and a UART, however it's exepected in future this will be

# expanded on and more complex software test suites will be implemented to put

# the system through its paces.

#

# Name of

# the directory we're currently in

CUR_DIR=$(shell pwd)

# The root path of the whole project

PROJECT_ROOT=$(CUR_DIR)/../..

# Tests is only defined if it wasn't already defined when make was called

# This is the default list of every test that is currently possible

TESTS ?= basic-nocache cbasic-nocache-O2 dhry-nocache-O2 except-nocache mmu-nocache mul-nocache-O2 syscall-nocache tick-nocache uart-nocache basic-icdc cbasic-icdc-O2 dhry-icdc-O2 except-icdc mmu-icdc mul-icdc-O2 syscall-icdc tick-icdc uart-icdc

# Paths to other important parts of this test suite

SIM_DIR=$(PROJECT_ROOT)/sim

SIM_RUN_DIR=$(SIM_DIR)/run

SIM_BIN_DIR=$(SIM_DIR)/bin

SIM_RESULTS_DIR=$(SIM_DIR)/results

SIM_VLT_DIR=$(SIM_DIR)/vlt

BENCH_DIR=$(PROJECT_ROOT)/bench

BACKEND_DIR=$(PROJECT_ROOT)/backend

BENCH_VERILOG_DIR=$(BENCH_DIR)/verilog

BENCH_SYSC_DIR=$(BENCH_DIR)/sysc

BENCH_SYSC_SRC_DIR=$(BENCH_SYSC_DIR)/src

BENCH_SYSC_INCLUDE_DIR=$(BENCH_SYSC_DIR)/include

RTL_VERILOG_DIR=$(PROJECT_ROOT)/rtl/verilog

SW_DIR=$(PROJECT_ROOT)/sw

ICARUS=iverilog

ICARUS_VVP=vvp

ICARUS_COMMAND_FILE=icarus.scr

VLT_COMMAND_FILE=verilator.scr

SIM_SUCCESS_MESSAGE=deaddead

ARCH_SIM_EXE=or32-elf-sim

ARCH_SIM_CFG_FILE=or1ksim-orpsocv2.cfg

# If USE_SDRAM is defined we'll add it to the simulator's defines on the

# command line becuase it's used by many different modules and it's easier

# to do it this way than make them all include a file.

ifdef USE_SDRAM

EVENT_SIM_FLAGS += "-D USE_SDRAM=$(USE_SDRAM)"

endif

# Enable ethernet if defined on the command line

ifdef USE_ETHERNET

EVENT_SIM_FLAGS += "-D USE_ETHERNET=$(USE_ETHERNET)"

endif

SIM_FLASH_MEM_FILE="flash.in"

FLASH_MEM_FILE_SUFFIX="-twobyte-sizefirst.hex"

SIM_SRAM_MEM_FILE="sram.vmem"

TESTS_PASSED=0

TESTS_PERFORMED=0;

################################################################################

# Event-driven simulator build rules (Icarus, NCSim)

################################################################################

.PHONY: prepare_rtl

prepare_rtl:

        @cd $(RTL_VERILOG_DIR)/components/wb_sdram_ctrl && perl fizzim.pl -encoding onehot -terse < wb_sdram_ctrl_fsm.fzm > wb_sdram_ctrl_fsm.v

        @cd $(RTL_VERILOG_DIR) && sed '/defparam/!s/\([a-zA-Z0-9_]\)\.//g' intercon.vm > intercon.v

ifdef UART_PRINTF

TEST_SW_MAKE_OPTS=UART_PRINTF=1

endif

.PHONY: prepare_sw

prepare_sw:

        @$(MAKE) -C $(SW_DIR)/support all $(TEST_SW_MAKE_OPTS)

        @$(MAKE) -C $(SW_DIR)/utils all

# A rule with UART_PRINTF hard defined ... used by verilator make sw

prepare_sw_uart_printf:

        @$(MAKE) -C $(SW_DIR)/support all UART_PRINTF=1 $(TEST_SW_MAKE_OPTS)

        @$(MAKE) -C $(SW_DIR)/utils all

# Rough guide to how these tests work:

# First, the couple of custom, required, software tools under sw/utils are

# compiled, and then the software library files.

# Next the few verilog files that need preperation are taken care of.

# The test begins by starting a loop in bash using on the strings defined in

# TESTS. Each one corresponds to a certain module of software for the OpenRISC

# that is included in this test suite. Under the sw/ path is a set of paths,

# and all except the support/ and utils/ paths contain code which is run to

# test the OR1k used in this test suite. For each of these software modules,

# it is possible that different tests are done using the same module. These

# tests can vary by either using different levels of optimisation during

# compilation, and/or by having the OR1k's caches enabled or disabled.

# Each test has a unique name, and under the $(SIM_RESULTS_DIR), which is

# usually just ../results, log files, and optionally VCD files, are created for

# inspection later and are named according to the test. Inspect the file

# bench/verilog/or1200_monitor.v to find out in detail what each log consists

# of.

# For each test, a few things occur. First the software that will run inside

# the simulated OR1k system is compiled, converted to a format which can be

# read

# into the flash memory model via $readmemh() and linked to the sim/run

# directory as $(SIM_FLASH_MEM_FILE), which currently is flash.in. Next a

# compilation script for icarus is generated, containing a list of all the

# RTL files and include directories. Next, an include file for the verilog

# testbench is generated, containing a string of the name of the current

# test, path to the results directory (for VCD generation) and any other

# things which might vary from test to test. This is not done by +define

# lines in the icarus script because of string handling incosistencies

# between different simulators and shells.

# Once all the files are generated, icarus is called to compile the rtl

# design, and then run it. Each of the tested software modules have code which

# will trigger the simulation to be stopped by use of the l.nop instruction

# with an immediate value of 1. When the simulation finishes, the simulation

# executable exits and the log of the simulation is inspected for the expected

# output. Currently, the string "deaddead" indicates that the software

# completed successfully. This is counted as the ORPSoC "passing" the test. In

# fact, whether the system did the right thing or not requires more

# inspection, but roughly this is a good indicator that nothing major went

# wrong.

# Once the current test is finished, the next begins with the compilation of its

# software and linking of the resulting hex file to the run path, etc.

# Main RAM setup - (RTL simulation with Icarus/NCSim only!):

# Define USE_SDRAM to enable the external SDRAM, otherwise the simulation

# defaults to an internal SRAM. Eg. $ make rtl-tests USE_SDRAM=1 VCD=1

# Verilator defaults to internal memories

rtl-tests: prepare_sw prepare_rtl

        @if [ ! -d $(SIM_RESULTS_DIR) ]; then mkdir -p $(SIM_RESULTS_DIR); fi

        @echo

        @echo "Beginning loop that will complete the following tests: $(TESTS)"

        @echo

        @for TEST in $(TESTS); do \

                echo "################################################################################"; \

                echo; \

                echo "\t#### Current test: $$TEST ####"; echo; \

                echo "\t#### Compiling software ####"; echo; \

                CURRENT_TEST_SW_DIR=$(SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \

                $(MAKE) -C $$CURRENT_TEST_SW_DIR $$TEST $(TEST_SW_MAKE_OPTS); \

                rm -f $(SIM_RUN_DIR)/$(SIM_FLASH_MEM_FILE); \

                rm -f $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \

                ln -s $$CURRENT_TEST_SW_DIR/$$TEST$(FLASH_MEM_FILE_SUFFIX) $(SIM_RUN_DIR)/$(SIM_FLASH_MEM_FILE); \

                ln -s $$CURRENT_TEST_SW_DIR/$$TEST.vmem $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \

                sed < $(SIM_BIN_DIR)/$(ICARUS_COMMAND_FILE) > $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated \

                        -e s!\$$BENCH_DIR!$(BENCH_VERILOG_DIR)!              \

                        -e s!\$$RTL_DIR!$(RTL_VERILOG_DIR)!                  \

                        -e s!\$$BACKEND_DIR!$(BACKEND_DIR)!                  \

                        -e \\!^//.*\$$!d -e \\!^\$$!d ; \

                echo "+define+TEST_DEFINE_FILE=\"test_define.v\"" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                if [ ! -z $$VCD ]; \

                        then echo "+define+VCD" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                fi; \

                if [ ! -z $$UART_PRINTF ]; \

                        then echo "+define+UART_PRINTF" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                fi; \

                echo "\`define TEST_NAME_STRING \"$$TEST\"" > $(SIM_RUN_DIR)/test_define.v; \

                echo "\`define TEST_RESULTS_DIR \"$(SIM_RESULTS_DIR)/\" " >> $(SIM_RUN_DIR)/test_define.v; \

                if [ -z $$NO_SIM_LOGGING ]; then \

                        echo "\`define OR1200_DISPLAY_ARCH_STATE" >> $(SIM_RUN_DIR)/test_define.v; \

                fi; \

                echo ; \

                echo "\t#### Compiling RTL ####"; \

                rm -f $(SIM_RUN_DIR)/a.out; \

                $(ICARUS) -sorpsoc_testbench -c $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated $(EVENT_SIM_FLAGS); \

                echo; \

                echo "\t#### Beginning simulation ####"; \

                time -p $(ICARUS_VVP) -l $(SIM_RESULTS_DIR)/$$TEST-vvp-out.log a.out ; \

                if [ $$? -gt 0 ]; then exit $$?; fi; \

                TEST_RESULT=`cat $(SIM_RESULTS_DIR)/$$TEST-general.log | grep report | grep $(SIM_SUCCESS_MESSAGE) -c`; \

                echo; echo "\t####"; \

                if [ $$TEST_RESULT -gt 0 ]; then \

                        echo "\t#### Test $$TEST PASSED ####";TESTS_PASSED=`expr $$TESTS_PASSED + 1`;\

                else    echo "\t#### Test $$TEST FAILED ####";\

                fi; \

                echo "\t####"; echo; \

                TESTS_PERFORMED=`expr $$TESTS_PERFORMED + 1`;\

        done; \

        echo "Test results: "$$TESTS_PASSED" out of "$$TESTS_PERFORMED" tests passed"; echo

# Use NCSIM instead of icarus

rtl-nc-tests: prepare_sw prepare_rtl

        @if [ ! -d $(SIM_RESULTS_DIR) ]; then mkdir -p $(SIM_RESULTS_DIR); fi

        @echo

        @echo "Beginning loop that will complete the following tests: $(TESTS)"

        @echo

        @for TEST in $(TESTS); do \

                echo "################################################################################"; \

                echo; \

                echo "\t#### Current test: $$TEST ####"; echo; \

                echo "\t#### Compiling software ####"; echo; \

                CURRENT_TEST_SW_DIR=$(SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \

                $(MAKE) -C $$CURRENT_TEST_SW_DIR $$TEST; \

                rm -f $(SIM_RUN_DIR)/$(SIM_FLASH_MEM_FILE); \

                rm -f $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \

                ln -s $$CURRENT_TEST_SW_DIR/$$TEST_twobyte_sizefirst.hex $(SIM_RUN_DIR)/$(SIM_FLASH_MEM_FILE); \

                ln -s $$CURRENT_TEST_SW_DIR/$$TEST_fourbyte.hex $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \

                sed < $(SIM_BIN_DIR)/$(ICARUS_COMMAND_FILE) > $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated \

                        -e s!\$$BENCH_DIR!$(BENCH_VERILOG_DIR)!              \

                        -e s!\$$RTL_DIR!$(RTL_VERILOG_DIR)!                  \

                        -e s!\$$BACKEND_DIR!$(BACKEND_DIR)!                  \

                        -e \\!^//.*\$$!d -e \\!^\$$!d ; \

                echo "+define+TEST_DEFINE_FILE=\"test_define.v\"" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                if [ ! -z $$VCD ]; \

                        then echo "+define+VCD" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                        echo "+access+r" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                fi; \

                if [ ! -z $$UART_PRINTF ]; \

                        then echo "+define+UART_PRINTF" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                fi; \

                if [ ! -z $$USE_SDRAM ]; then \

                        echo "\`define USE_SDRAM" >> $(SIM_RUN_DIR)/test_define.v; \

                fi; \

                echo "+nocopyright" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                echo "+nowarn+MACRDF" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \

                echo "\`define TEST_NAME_STRING \"$$TEST\"" > $(SIM_RUN_DIR)/test_define.v; \

                echo "\`define TEST_RESULTS_DIR \"$(SIM_RESULTS_DIR)/\" " >> $(SIM_RUN_DIR)/test_define.v; \

                if [ -z $$NO_SIM_LOGGING ]; then \

                        echo "\`define OR1200_DISPLAY_ARCH_STATE" >> $(SIM_RUN_DIR)/test_define.v; \

                fi; \

                echo ; \

                echo "\t#### Beginning simulation ####"; \

                time -p ncverilog -f $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated -Q -l $(SIM_RESULTS_DIR)/$$TEST-ius-out.log $(EVENT_SIM_FLAGS); \

                if [ $$? -gt 0 ]; then exit $$?; fi; \

                TEST_RESULT=`cat $(SIM_RESULTS_DIR)/$$TEST-general.log | grep report | grep $(SIM_SUCCESS_MESSAGE) -c`; \

                echo; echo "\t####"; \

                if [ $$TEST_RESULT -gt 0 ]; then \

                        echo "\t#### Test $$TEST PASSED ####";TESTS_PASSED=`expr $$TESTS_PASSED + 1`;\

                else    echo "\t#### Test $$TEST FAILED ####";\

                fi; \

                echo "\t####"; echo; \

                TESTS_PERFORMED=`expr $$TESTS_PERFORMED + 1`;\

        done; \

        echo "Test results: "$$TESTS_PASSED" out of "$$TESTS_PERFORMED" tests passed"; echo

################################################################################

# Verilator model build rules

################################################################################

SYSC_LIB_ARCH_DIR=$(shell ls $$SYSTEMC | grep "lib-")

# List of System C models - use this list to link the sources into the Verilator

# build directory

SYSC_MODELS=OrpsocAccess TraceSC

ifdef VCD

VLT_FLAGS +=-trace

endif

# Only need the trace target if we are tracing

ifneq (,$(findstring -trace, $(VLT_FLAGS)))

VLT_TRACEOBJ = SpTraceVcdC

endif

# This is the list of extra models we'll issue make commands for

# Included is the SystemPerl trace model

SYSC_MODELS_BUILD=$(SYSC_MODELS) $(VLT_TRACEOBJ)

prepare_vlt: prepare_rtl vlt_model_links $(SIM_VLT_DIR)/Vorpsoc_top

$(SIM_VLT_DIR)/Vorpsoc_top: $(SIM_VLT_DIR)/libVorpsoc_top.a $(SIM_VLT_DIR)/OrpsocMain.o

# Final linking of the simulation executable. Order of libraries here is important!

        @echo; echo "\tGenerating simulation executable"; echo

        cd $(SIM_VLT_DIR) && g++ -I$(BENCH_SYSC_INCLUDE_DIR) -I$(SIM_VLT_DIR) -I$(VERILATOR_ROOT)/include -I$(SYSTEMC)/include -o Vorpsoc_top -L. -L$(BENCH_SYSC_SRC_DIR) -L$(SYSTEMC)/$(SYSC_LIB_ARCH_DIR) OrpsocMain.o -lVorpsoc_top -lmodules -lsystemc

$(SIM_VLT_DIR)/OrpsocMain.o:

# Now compile the top level systemC "testbench" module

        @echo; echo "\tCompiling top level SystemC testbench"; echo

        cd $(SIM_VLT_DIR) && g++ -I$(BENCH_SYSC_INCLUDE_DIR) -I$(SIM_VLT_DIR) -I$(VERILATOR_ROOT)/include -I$(SYSTEMC)/include -c $(BENCH_SYSC_SRC_DIR)/OrpsocMain.cpp

$(SIM_VLT_DIR)/libVorpsoc_top.a: $(SIM_VLT_DIR)/Vorpsoc_top__ALL.a vlt_modules_compile $(SIM_VLT_DIR)/verilated.o

# Now archive all of the libraries from verilator witht he other modules we might have

        @echo; echo "\tArchiving libraries into libVorpsoc_top.a"; echo

        @cd $(SIM_VLT_DIR) && \

        cp Vorpsoc_top__ALL.a libVorpsoc_top.a && \

        ar rcs libVorpsoc_top.a verilated.o; \

        for SYSCMODEL in $(SYSC_MODELS_BUILD); do \

                ar rcs libVorpsoc_top.a $$SYSCMODEL.o; \

        done

$(SIM_VLT_DIR)/verilated.o:

        @echo; echo "\tCompiling verilated.o"; echo

        @cd $(SIM_VLT_DIR) && \

        $(MAKE) -f Vorpsoc_top.mk verilated.o

.PHONY: vlt_modules_compile

vlt_modules_compile:

# Compile the module files

        @echo; echo "\tCompiling SystemC models"

        @cd $(SIM_VLT_DIR) && \

        for SYSCMODEL in $(SYSC_MODELS_BUILD); do \

                echo;echo "\t$$SYSCMODEL"; echo; \

                $(MAKE) -f Vorpsoc_top.mk $$SYSCMODEL.o; \

        done

$(SIM_VLT_DIR)/Vorpsoc_top__ALL.a: $(SIM_VLT_DIR)/Vorpsoc_top.mk

        @echo; echo "\tCompiling main design"; echo

        @cd $(SIM_VLT_DIR) && \

        $(MAKE) -f Vorpsoc_top.mk Vorpsoc_top__ALL.a

$(SIM_VLT_DIR)/Vorpsoc_top.mk: $(SIM_VLT_DIR)/$(VLT_COMMAND_FILE).generated $(SIM_VLT_DIR)/libmodules.a

# Now call verilator to generate the .mk files

        @echo; echo "\tGenerating makefiles with Verilator"; echo

        cd $(SIM_VLT_DIR) && \

        verilator -language 1364-2001 -Wno-lint --top-module orpsoc_top -Mdir . -sc $(VLT_FLAGS) -I$(BENCH_SYSC_INCLUDE_DIR) -I$(BENCH_SYSC_SRC_DIR) -f $(VLT_COMMAND_FILE).generated

# SystemC modules library

$(SIM_VLT_DIR)/libmodules.a:

        @echo; echo "\tCompiling SystemC modules"; echo

        @$(MAKE) -C $(BENCH_SYSC_SRC_DIR) -f $(BENCH_SYSC_SRC_DIR)/Modules.make

# Verilator command script

# Generate the compile script to give Verilator

$(SIM_VLT_DIR)/$(VLT_COMMAND_FILE).generated:

        @echo; echo "\tGenerating verilator compile script"; echo

        @sed < $(SIM_BIN_DIR)/$(VLT_COMMAND_FILE) > $(SIM_VLT_DIR)/$(VLT_COMMAND_FILE).generated \

                -e s!\$$BENCH_DIR!$(BENCH_VERILOG_DIR)!              \

                -e s!\$$RTL_DIR!$(RTL_VERILOG_DIR)!                  \

                -e s!\$$BACKEND_DIR!$(BACKEND_DIR)!                  \

                -e \\!^//.*\$$!d -e \\!^\$$!d;

.PHONY: vlt_model_links

vlt_model_links:

# Link all the required system C model files into the verilator work dir

        @echo; echo "\tLinking SystemC model source to verilator build path"; echo

        @if [ ! -d $(SIM_VLT_DIR) ]; then mkdir $(SIM_VLT_DIR); fi

        @cd $(SIM_VLT_DIR) && \

        for SYSCMODEL in $(SYSC_MODELS); do \

                if [ ! -e $$SYSCMODEL.cpp ]; then \

                        ln -s $(BENCH_SYSC_SRC_DIR)/$$SYSCMODEL.cpp .; \

                        ln -s $(BENCH_SYSC_INCLUDE_DIR)/$$SYSCMODEL.h .; \

                fi; \

        done

################################################################################

# Verilator test loop

################################################################################

# Verilator defaults to internal memories

vlt-tests: prepare_sw_uart_printf prepare_rtl prepare_vlt

        @if [ ! -d $(SIM_RESULTS_DIR) ]; then mkdir -p $(SIM_RESULTS_DIR); fi

        @echo

        @echo "Beginning loop that will complete the following tests: $(TESTS)"

        @echo

        @for TEST in $(TESTS); do \

                echo "################################################################################"; \

                echo; \

                echo "\t#### Current test: $$TEST ####"; echo; \

                echo "\t#### Compiling software ####"; echo; \

                CURRENT_TEST_SW_DIR=$(SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \

                $(MAKE) -C $$CURRENT_TEST_SW_DIR $$TEST $(TEST_SW_MAKE_OPTS) UART_PRINTF=1; \

                rm -f $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \

                ln -s $$CURRENT_TEST_SW_DIR/$$TEST.vmem $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \

                echo "\t#### Beginning simulation ####"; \

                time -p $(SIM_VLT_DIR)/Vorpsoc_top $$TEST; \

                if [ $$? -gt 0 ]; then exit $$?; fi; \

                TEST_RESULT=1; \

                echo; echo "\t####"; \

                if [ $$TEST_RESULT -gt 0 ]; then \

                        echo "\t#### Test $$TEST PASSED ####";TESTS_PASSED=`expr $$TESTS_PASSED + 1`;\

                else    echo "\t#### Test $$TEST FAILED ####";\

                fi; \

                echo "\t####"; echo; \

                TESTS_PERFORMED=`expr $$TESTS_PERFORMED + 1`;\

        done; \

        echo "Test results: "$$TESTS_PASSED" out of "$$TESTS_PERFORMED" tests passed"; echo

################################################################################

# Architectural simulator test loop

################################################################################

# Verilator defaults to internal memories

sim-tests: prepare_sw_uart_printf

        @if [ ! -d $(SIM_RESULTS_DIR) ]; then mkdir -p $(SIM_RESULTS_DIR); fi

        @echo

        @echo "Beginning loop that will complete the following tests: $(TESTS)"

        @echo

        @for TEST in $(TESTS); do \

                echo "################################################################################"; \

                echo; \

                echo "\t#### Current test: $$TEST ####"; echo; \

                echo "\t#### Compiling software ####"; echo; \

                CURRENT_TEST_SW_DIR=$(SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \

                $(MAKE) -C $$CURRENT_TEST_SW_DIR $$TEST $(TEST_SW_MAKE_OPTS) UART_PRINTF=1; \

                rm -f $(SIM_RUN_DIR)/$(SIM_SRAM_MEM_FILE); \

                ln -s $$CURRENT_TEST_SW_DIR/$$TEST.or32 $(SIM_RUN_DIR)/.; \

                echo;echo "\t#### Launching architectural simulator ####"; \

                time -p $(ARCH_SIM_EXE) --nosrv -f $(SIM_BIN_DIR)/$(ARCH_SIM_CFG_FILE) $$TEST.or32 > $(SIM_RESULTS_DIR)/$$TEST-or1ksim.log 2>&1; \

                if [ $$? -gt 0 ]; then exit $$?; fi; \

                if [ `tail -n 10 $(SIM_RESULTS_DIR)/$$TEST-or1ksim.log | grep -c $(SIM_SUCCESS_MESSAGE)` -gt 0 ]; then \

                        TEST_RESULT=1; \

                fi; \

                echo; echo "\t####"; \

                if [ $$TEST_RESULT -gt 0 ]; then \

                        echo "\t#### Test $$TEST PASSED ####";TESTS_PASSED=`expr $$TESTS_PASSED + 1`;\

                else    echo "\t#### Test $$TEST FAILED ####";\

                fi; \

                echo "\t####"; echo; \

                TESTS_PERFORMED=`expr $$TESTS_PERFORMED + 1`;\

                unlink $(SIM_RUN_DIR)/$$TEST.or32; \

        done; \

        echo "Test results: "$$TESTS_PASSED" out of "$$TESTS_PERFORMED" tests passed"; echo

################################################################################

# Cleaning rules

################################################################################

clean: clean-sw clean-sim

clean-sw:

        @for TEST in $(TESTS); do \

                echo "Current test: $$TEST"; \

                CURRENT_TEST_SW_DIR=$(SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \

                echo "Current test sw directory: " $$CURRENT_TEST_SW_DIR; \

                $(MAKE) -C $$CURRENT_TEST_SW_DIR clean; \

        done

        $(MAKE) -C $(SW_DIR)/support clean

        $(MAKE) -C $(SW_DIR)/utils clean

clean-sim:

        rm -rf $(SIM_RESULTS_DIR) $(SIM_RUN_DIR)/*.* $(SIM_VLT_DIR)