Subversion Repositories openrisc

/*************************************************************

* I2C functions for the Herveille i2c controller            *

*                                                           *

* Provides functions to read from and write to the I2C bus. *

* Master and slave mode are both supported                  *

*                                                           *

* Julius Baxter, julius@opencores.org                       *

*                                                           *

************************************************************/

#include "board.h"

#include "cpu-utils.h"

#include "i2c_master_slave.h"

// Ensure board.h defines I2C_MASTER_SLAVE_NUM_CORES and 

// I2C_MASTER_SLAVE_BASE_ADDRESSES_CSV which should be the base address values

// separated with commas

#ifdef I2C_MASTER_SLAVE_NUM_CORES

const int I2C_MASTER_SLAVE_BASE_ADR[I2C_MASTER_SLAVE_NUM_CORES] = {

        I2C_MASTER_SLAVE_BASE_ADDRESSES_CSV };

#else

const int I2C_MASTER_SLAVE_BASE_ADR[1] = {-1};

#endif

inline unsigned char i2c_master_slave_read_reg(int core, unsigned char addr)

{

        return REG8((I2C_MASTER_SLAVE_BASE_ADR[core] + addr));

}

inline void i2c_master_slave_write_reg(int core, unsigned char addr,

                                       unsigned char data)

{

        REG8((I2C_MASTER_SLAVE_BASE_ADR[core] + addr)) = data;

}

int i2c_master_slave_wait_for_busy(int core)

{

        while (1) {

                // Check for busy flag in i2c status reg

                if (!

                    (i2c_master_slave_read_reg(core, I2C_MASTER_SLAVE_SR) &

                     I2C_MASTER_SLAVE_SR_BUSY))

                        return 0;

        }

}

int i2c_master_slave_wait_for_transfer(int core)

{

        volatile unsigned char status;

        // Wait for ongoing transmission to finish

        while (1) {

                status = i2c_master_slave_read_reg(core, I2C_MASTER_SLAVE_SR);

                // If arbitration lost

                if ((status & I2C_MASTER_SLAVE_SR_ARB_LOST) ==

                    I2C_MASTER_SLAVE_SR_ARB_LOST)

                        return 2;

                // If TIP bit = o , stop waiting

                else if (!(status & I2C_MASTER_SLAVE_SR_TRANSFER_IN_PRG))

                        return 0;

        }

}

/***********************************************************

* i2c_master_slave_init_core                               *

*                                                          *

* Setup i2c core:                                          *

* Write prescaler register with parmeter passed, enable    *

* core in control register, optionally enable interrupts   *

************************************************************/

int i2c_master_slave_init_core(int core, unsigned short prescaler,

                               int interrupt_enable)

{

        // Setup I2C prescaler,

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_PRERlo,

                                   prescaler & 0xff);

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_PRERhi,

                                   (prescaler >> 8) & 0xff);

        // Enable I2C controller and optionally interrupts

        if (interrupt_enable)

                i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CTR,

                                           I2C_MASTER_SLAVE_CTR_CORE_ENABLE |

                                           I2C_MASTER_SLAVE_CTR_INTR_ENABLE);

        else

                i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CTR,

                                           I2C_MASTER_SLAVE_CTR_CORE_ENABLE);

        return 0;

}

/***********************************************************

* i2c_master_slave_deact_core                              *

*                                                          *

* Deactivate i2c core:                                     *

* Clear core enable and interrupt enable bits              *

************************************************************/

int i2c_master_slave_deact_core(int core)

{

  i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CTR,

                             i2c_master_slave_read_reg(core,

                                                       I2C_MASTER_SLAVE_CTR) &

                             ~(I2C_MASTER_SLAVE_CTR_CORE_ENABLE |

                               I2C_MASTER_SLAVE_CTR_INTR_ENABLE));

        return 0;

}

/***********************************************************

* i2c_master_slave_init_as_slave                           *

*                                                          *

* Setup i2c core to service slave accesses                 *

* OR in slave enable bit to control register               *

* Set slave address                                        *

************************************************************/

int i2c_master_slave_init_as_slave(int core, char addr)

{

        // Set slave enable bit

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CTR,

                                   i2c_master_slave_read_reg(core,

                                                             I2C_MASTER_SLAVE_CTR)

                                   | I2C_MASTER_SLAVE_CTR_SLAVE_ENABLE);

        // Set slave address

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_SLADR, addr);

        return 0;

}

/***********************************************************

* i2c_master_slave_deact_as_slave                          *

*                                                          *

* Disable slave mode for this I2C core                     *

* Deassert slave eanble bit in control register            *

************************************************************/

int i2c_master_slave_deact_as_slave(int core)

{

        // Clear slave enable bit

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CTR,

                                   i2c_master_slave_read_reg(core,

                                                             I2C_MASTER_SLAVE_CTR)

                                   & ~I2C_MASTER_SLAVE_CTR_SLAVE_ENABLE);

        return 0;

}

/***********************************************************

* i2c_master_slave_master_start                            *

*                                                          *

* Get the i2c bus.                                         *

************************************************************/

int i2c_master_slave_master_start(int core, unsigned char addr, int read)

{

        i2c_master_slave_wait_for_busy(core);

        // Set address in transfer register

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_TXR,

                                   (addr << 1) | read);

        // Start and write the address

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CR,

                                   I2C_MASTER_SLAVE_CR_START |

                                   I2C_MASTER_SLAVE_CR_WRITE);

        i2c_master_slave_wait_for_transfer(core);

        return 0;

}

/***********************************************************

* i2c_master_slave_master_write                            *

*                                                          *

* Send 1 byte of data                                      *

************************************************************/

int i2c_master_slave_master_write(int core, unsigned char data,

                                  int check_prev_ack, int stop)

{

        if (i2c_master_slave_wait_for_transfer(core))

                return 1;

        // present data

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_TXR, data);

        if (!stop)

                // set command (write)

                i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CR,

                                           I2C_MASTER_SLAVE_CR_WRITE);

        else

                // set command (write) and stop

                i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CR,

                                           I2C_MASTER_SLAVE_CR_WRITE |

                                           I2C_MASTER_SLAVE_CR_STOP);

        return i2c_master_slave_wait_for_transfer(core);

}

/***********************************************************

* i2c_master_slave_master_stop                             *

*                                                          *

* Send stop condition                                      *

************************************************************/

int i2c_master_slave_master_stop(int core)

{

        unsigned char status;

        unsigned char ready = 0;

        // Make I2C controller wait at end of finished byte

        if (i2c_master_slave_wait_for_transfer(core))

                return 1;

        // Send stop condition

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CR,

                                   I2C_MASTER_SLAVE_CR_STOP);

        return 0;

}

/***********************************************************

* i2c_master_slave_master_read                             *

*                                                          *

* Read 1 byte of data                                      *

************************************************************/

int i2c_master_slave_master_read(int core, int check_prev_ack,

                                 int stop, char *data)

{

        // Make I2C controller wait at end of finished byte

        if (i2c_master_slave_wait_for_transfer(core))

                return 1;

        if (stop)

                i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CR,

                                           I2C_MASTER_SLAVE_CR_READ |

                                           I2C_MASTER_SLAVE_CR_STOP);

        else

                i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CR,

                                           I2C_MASTER_SLAVE_CR_READ);

        if (i2c_master_slave_wait_for_transfer(core))

                return 1;

        *data = i2c_master_slave_read_reg(core, I2C_MASTER_SLAVE_RXR);

        return i2c_master_slave_wait_for_transfer(core);

}

/***********************************************************

* i2c_master_slave_ack_interrupt                           *

*                                                          *

* Acknowledge interrupt has been serviced                  *

************************************************************/

int i2c_master_slave_ack_interrupt(int core)

{

        i2c_master_slave_write_reg(core, I2C_MASTER_SLAVE_CR,

                                   I2C_MASTER_SLAVE_CR_IACK);

        return 0;

}