URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [doc/] [html/] [ref/] [aaed2000.html] - Blame information for rev 174

Details | Compare with Previous | View Log


<!-- Copyright (C) 2003 Red Hat, Inc.                                -->
<!-- This material may be distributed only subject to the terms      -->
<!-- and conditions set forth in the Open Publication License, v1.0  -->
<!-- or later (the latest version is presently available at          -->
<!-- http://www.opencontent.org/openpub/).                           -->
<!-- Distribution of the work or derivative of the work in any       -->
<!-- standard (paper) book form is prohibited unless prior           -->
<!-- permission is obtained from the copyright holder.               -->
<HTML
><HEAD
><TITLE
>ARM/ARM9 Agilent AAED2000</TITLE
><meta name="MSSmartTagsPreventParsing" content="TRUE">
<META
NAME="GENERATOR"
CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
"><LINK
REL="HOME"
TITLE="eCos Reference Manual"
HREF="ecos-ref.html"><LINK
REL="UP"
TITLE="Installation and Testing"
HREF="installation-and-testing.html"><LINK
REL="PREVIOUS"
TITLE="ARM/ARM7 Cirrus Logic EP7xxx (EDB7211, EDB7212, EDB7312) "
HREF="edb7xxx.html"><LINK
REL="NEXT"
TITLE="ARM/ARM9 Altera Excalibur"
HREF="excaliburarm9.html"></HEAD
><BODY
CLASS="SECT1"
BGCOLOR="#FFFFFF"
TEXT="#000000"
LINK="#0000FF"
VLINK="#840084"
ALINK="#0000FF"
><DIV
CLASS="NAVHEADER"
><TABLE
SUMMARY="Header navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TH
COLSPAN="3"
ALIGN="center"
>eCos Reference Manual</TH
></TR
><TR
><TD
WIDTH="10%"
ALIGN="left"
VALIGN="bottom"
><A
HREF="edb7xxx.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="80%"
ALIGN="center"
VALIGN="bottom"
>Chapter 5. Installation and Testing</TD
><TD
WIDTH="10%"
ALIGN="right"
VALIGN="bottom"
><A
HREF="excaliburarm9.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
></TABLE
><HR
ALIGN="LEFT"
WIDTH="100%"></DIV
><DIV
CLASS="SECT1"
><H1
CLASS="SECT1"
><A
NAME="AAED2000">ARM/ARM9 Agilent AAED2000</H1
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN5379">Overview</H2
><P
>RedBoot supports the serial and ethernet ports
on the board. The default serial port settings are 38400,8,N,1.
RedBoot also supports flash management on the AAED2000.</P
><P
>The following RedBoot configurations are supported:
 
      <DIV
CLASS="INFORMALTABLE"
><A
NAME="AEN5389"><P
></P
><TABLE
BORDER="1"
CLASS="CALSTABLE"
><THEAD
><TR
><TH
ALIGN="LEFT"
VALIGN="TOP"
>Configuration</TH
><TH
ALIGN="LEFT"
VALIGN="TOP"
>Mode</TH
><TH
ALIGN="LEFT"
VALIGN="TOP"
>Description</TH
><TH
ALIGN="LEFT"
VALIGN="TOP"
>File</TH
></TR
></THEAD
><TBODY
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>ROMRAM</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>[ROMRAM]</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RedBoot running from RAM, but contained in the
              board's flash boot sector.</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>redboot_primary_ROMRAM.ecm</TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RAM</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>[RAM]</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RedBoot running from RAM with RedBoot in the
              flash boot sector.</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>redboot_primary_RAM.ecm</TD
></TR
></TBODY
></TABLE
><P
></P
></DIV
></P
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN5408">Initial Installation Method</H2
><P
>It is possible to install RedBoot in one of two ways. Either as
the primary bootmonitor on the board (installed to blocks 0-1 of the
flash) or as the secondary bootmonitor on the board (installed to
blocks 1-2 of the flash).</P
><P
>Presently, only the former method is supported.</P
><DIV
CLASS="SECT3"
><H3
CLASS="SECT3"
><A
NAME="AEN5412">RedBoot as Primary Bootmonitor</H3
><P
>RedBoot is installed in flash using the on-board ARM Boot
Monitor.</P
><P
>Boot the board while pressing SPACE. This should bring up the
Boot Monitor:
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>ARM bootPROM [Version 1.3] Rebuilt on Jul 16 2001 at 16:21:36
Running on a P920 board Evaluation Board
Board Revision V1.0, ARM920T processor Processor
Memory Size is 32MBytes, Flash Size is 32MBytes
Copyright (c) ARM Limited 1999 - 2001. All rights reserved.
Board designed by ARM Limited
Hardware support provided at http://www.arm.com/
For help on the available commands type ? or h
boot Monitor &#62;                                                                  </PRE
></TD
></TR
></TABLE
>
 
Download the RAM mode image of RedBoot configured as a primary
bootmonitor using the ARM bootmonitor's SREC-download command:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>boot Monitor &gt; <TT
CLASS="USERINPUT"
><B
>m</B
></TT
>
Load Motorola S-Record image into memory and execute it
The S-Record loader only accepts input on the serial port.
Record addresses must be between 0x00008000 and 0x01E0F510.
Type Ctrl/C to exit loader.</PRE
></TD
></TR
></TABLE
>
 
Use the terminal emulator's ASCII upload command, or (on Linux) simply
cat the file to the serial port:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>$ <TT
CLASS="USERINPUT"
><B
>cat redboot_primary_RAM/redboot.srec &gt;/dev/ttyS1</B
></TT
></PRE
></TD
></TR
></TABLE
>
 
You should see RedBoot start up:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>FLASH configuration checksum error or invalid key
Ethernet eth0: MAC address 00:30:d3:03:04:99
IP: 192.168.42.111, Default server: 192.168.42.3
 
RedBoot(tm) bootstrap and debug environment [RAM]
Non-certified release, version UNKNOWN - built 13:15:40, Nov  9 2001
 
Platform: AAED2000 system (ARM9) [Primary]
Copyright (C) 2000, 2001, Red Hat, Inc.
 
RAM: 0x00000000-0x01f80000, 0x0006f208-0x01f51000 available
FLASH: 0x60000000 - 0x62000000, 256 blocks of 0x00020000 bytes each.
RedBoot&#62;</PRE
></TD
></TR
></TABLE
>
 
As can be seen from the output above, the network has been configured
to give the board an IP address and information about the default
server. If things are not set up on your network, you can still
continue, but use the Y-modem download method when loading the RedBoot
ROMRAM mode image.
 
Now initialize RedBoot's FIS:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>RedBoot&gt; <TT
CLASS="USERINPUT"
><B
>fis init</B
></TT
>
About to initialize [format] FLASH image system - continue (y/n)? <TT
CLASS="USERINPUT"
><B
>y</B
></TT
>
*** Initialize FLASH Image System
    Warning: device contents not erased, some blocks may not be usable
... Erase from 0x61fe0000-0x62000000: .
... Program from 0x01f5f000-0x01f5f300 at 0x61fe0000: .</PRE
></TD
></TR
></TABLE
>
 
Download the ROMRAM mode image of RedBoot via ethernet:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>RedBoot&gt; <TT
CLASS="USERINPUT"
><B
>load -b %{FREEMEMLO} redboot_primary_ROMRAM/redboot.srec</B
></TT
></PRE
></TD
></TR
></TABLE
>
 
or using serial Y-modem protocol:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>RedBoot&gt; <TT
CLASS="USERINPUT"
><B
>load -mode ymodem -b %{FREEMEMLO}</B
></TT
></PRE
></TD
></TR
></TABLE
>
 
(Use the terminal emulator's Y-modem upload command to send the file
<TT
CLASS="FILENAME"
>redboot_primary_ROMRAM/redboot.srec</TT
>.)
 
When the image has been downloaded, program it into flash:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>Address offset = 0x00ff8000
Entry point: 0x00008040, address range: 0x00008000-0x0002da80
RedBoot&gt; <TT
CLASS="USERINPUT"
><B
>fi cr RedBoot</B
></TT
>
An image named 'RedBoot' exists - continue (y/n)? <TT
CLASS="USERINPUT"
><B
>y</B
></TT
>
* CAUTION * about to program 'RedBoot'
            at 0x60000000..0x6003ffff from 0x00100000 - continue (y/n)? <TT
CLASS="USERINPUT"
><B
>y</B
></TT
>
... Erase from 0x60000000-0x60040000: ..
... Program from 0x00100000-0x00140000 at 0x60000000: ..
... Erase from 0x61fe0000-0x62000000: .
... Program from 0x01f5f000-0x01f7f000 at 0x61fe0000: .</PRE
></TD
></TR
></TABLE
>
 
Now reset the board. You should see the RedBoot banner.</P
></DIV
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN5434">Special RedBoot Commands</H2
><P
>The <B
CLASS="COMMAND"
>exec</B
> command which allows the loading
and execution of Linux kernels,
is supported for this board (see <A
HREF="executing-programs.html"
>the Section called <I
>Executing Programs from RedBoot</I
> in Chapter 2</A
>). The <B
CLASS="COMMAND"
>exec</B
> parameters used for the AAED2000 are:</P
><P
></P
><DIV
CLASS="VARIABLELIST"
><DL
><DT
>-b <TT
CLASS="REPLACEABLE"
><I
>&lt;addr&#62;</I
></TT
></DT
><DD
><P
>Location Linux kernel was loaded to</P
></DD
><DT
>-l <TT
CLASS="REPLACEABLE"
><I
>&lt;len&#62;</I
></TT
></DT
><DD
><P
>Length of kernel</P
></DD
><DT
>-c <TT
CLASS="REPLACEABLE"
><I
>"params"</I
></TT
></DT
><DD
><P
>Parameters passed to kernel</P
></DD
><DT
>-r <TT
CLASS="REPLACEABLE"
><I
>&lt;addr&#62;</I
></TT
></DT
><DD
><P
>'initrd' ramdisk location</P
></DD
><DT
>-s <TT
CLASS="REPLACEABLE"
><I
>&lt;len&#62;</I
></TT
></DT
><DD
><P
>Length of initrd ramdisk</P
></DD
></DL
></DIV
><P
>The parameters for kernel image base and size are automatically
set after a load operation. So one way of starting the kernel would
be:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>RedBoot&gt; <TT
CLASS="USERINPUT"
><B
>load -r -b 0x100000 zImage</B
></TT
>
Raw file loaded 0x00100000-0x001a3d6c
RedBoot&gt; exec -c "console=ttyAC0,38400"
Using base address 0x00100000 and length 0x000a3d6c
Uncompressing Linux.....</PRE
></TD
></TR
></TABLE
>
 
An image could also be put in flash and started directly:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>RedBoot&gt; <TT
CLASS="USERINPUT"
><B
>exec -b 0x60040000 -l 0xc0000 -c "console=ttyAC0,38400"</B
></TT
>
Uncompressing Linux.....</PRE
></TD
></TR
></TABLE
>&#13;</P
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN5471">Memory Maps</H2
><P
>The MMU page tables are located at 0x4000. <DIV
CLASS="NOTE"
><BLOCKQUOTE
CLASS="NOTE"
><P
><B
>NOTE: </B
>The virtual memory maps in this section use a C and B column to indicate
whether or not the region is cached (C) or buffered (B).</P
></BLOCKQUOTE
></DIV
><TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>Physical Address Range     Description
-----------------------    ----------------------------------
0x00000000 - 0x01ffffff    Flash
0x10000000 - 0x100fffff    Ethernet
0x30000000 - 0x300fffff    Board registers
0x40000000 - 0x4fffffff    PCMCIA Slot (0)
0x50000000 - 0x5fffffff    Compact Flash Slot (1)
0x80000000 - 0x800037ff    I/O registers
0xb0060000 - 0xb00fffff    On-chip SRAM
0xf0000000 - 0xfd3fffff    SDRAM
 
Virtual Address Range    C B  Description
-----------------------  - -  ----------------------------------
0x00000000 - 0x01f7ffff  Y Y  SDRAM
0x01f80000 - 0x01ffffff  Y Y  SDRAM (used for LCD frame buffer)
0x10000000 - 0x100fffff  N N  Ethernet
0x30000000 - 0x300fffff  N N  Board registers
0x40000000 - 0x4fffffff  N N  PCMCIA Slot (0)
0x50000000 - 0x5fffffff  N N  Compact Flash Slot (1)
0x60000000 - 0x61ffffff  N N  Flash
0x80000000 - 0x800037ff  N N  I/O registers
0xf0000000 - 0xffffffff  N N  SDRAM (uncached)&#13;</PRE
></TD
></TR
></TABLE
></P
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN5478">Rebuilding RedBoot</H2
><P
>These shell variables provide the platform-specific information
needed for building RedBoot according to the procedure described in
<A
HREF="rebuilding-redboot.html"
>Chapter 3</A
>:
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>export TARGET=aaed
export ARCH_DIR=arm
export PLATFORM_DIR=arm9/aaed2000</PRE
></TD
></TR
></TABLE
></P
><P
>The names of configuration files are listed above with the
description of the associated modes.</P
></DIV
></DIV
><DIV
CLASS="NAVFOOTER"
><HR
ALIGN="LEFT"
WIDTH="100%"><TABLE
SUMMARY="Footer navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
><A
HREF="edb7xxx.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="ecos-ref.html"
ACCESSKEY="H"
>Home</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
><A
HREF="excaliburarm9.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
>ARM/ARM7 Cirrus Logic EP7xxx (EDB7211, EDB7212, EDB7312)</TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="installation-and-testing.html"
ACCESSKEY="U"
>Up</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
>ARM/ARM9 Altera Excalibur</TD
></TR
></TABLE
></DIV
></BODY
></HTML
>

Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [doc/] [html/] [ref/] [aaed2000.html] - Blame information for rev 174

Line No.	Rev	Author	Line
1	28	unneback	`<!-- Copyright (C) 2003 Red Hat, Inc. -->`
2			`<!-- This material may be distributed only subject to the terms -->`
3			`<!-- and conditions set forth in the Open Publication License, v1.0 -->`
4			`<!-- or later (the latest version is presently available at -->`
5			`<!-- http://www.opencontent.org/openpub/). -->`
6			`<!-- Distribution of the work or derivative of the work in any -->`
7			`<!-- standard (paper) book form is prohibited unless prior -->`
8			`<!-- permission is obtained from the copyright holder. -->`
9			`<HTML`
10			`><HEAD`
11			`><TITLE`
12			`>ARM/ARM9 Agilent AAED2000</TITLE`
13			`><meta name="MSSmartTagsPreventParsing" content="TRUE">`
14			`<META`
15			`NAME="GENERATOR"`
16			`CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+`
17			`"><LINK`
18			`REL="HOME"`
19			`TITLE="eCos Reference Manual"`
20			`HREF="ecos-ref.html"><LINK`
21			`REL="UP"`
22			`TITLE="Installation and Testing"`
23			`HREF="installation-and-testing.html"><LINK`
24			`REL="PREVIOUS"`
25			`TITLE="ARM/ARM7 Cirrus Logic EP7xxx (EDB7211, EDB7212, EDB7312) "`
26			`HREF="edb7xxx.html"><LINK`
27			`REL="NEXT"`
28			`TITLE="ARM/ARM9 Altera Excalibur"`
29			`HREF="excaliburarm9.html"></HEAD`
30			`><BODY`
31			`CLASS="SECT1"`
32			`BGCOLOR="#FFFFFF"`
33			`TEXT="#000000"`
34			`LINK="#0000FF"`
35			`VLINK="#840084"`
36			`ALINK="#0000FF"`
37			`><DIV`
38			`CLASS="NAVHEADER"`
39			`><TABLE`
40			`SUMMARY="Header navigation table"`
41			`WIDTH="100%"`
42			`BORDER="0"`
43			`CELLPADDING="0"`
44			`CELLSPACING="0"`
45			`><TR`
46			`><TH`
47			`COLSPAN="3"`
48			`ALIGN="center"`
49			`>eCos Reference Manual</TH`
50			`></TR`
51			`><TR`
52			`><TD`
53			`WIDTH="10%"`
54			`ALIGN="left"`
55			`VALIGN="bottom"`
56			`><A`
57			`HREF="edb7xxx.html"`
58			`ACCESSKEY="P"`
59			`>Prev</A`
60			`></TD`
61			`><TD`
62			`WIDTH="80%"`
63			`ALIGN="center"`
64			`VALIGN="bottom"`
65			`>Chapter 5. Installation and Testing</TD`
66			`><TD`
67			`WIDTH="10%"`
68			`ALIGN="right"`
69			`VALIGN="bottom"`
70			`><A`
71			`HREF="excaliburarm9.html"`
72			`ACCESSKEY="N"`
73			`>Next</A`
74			`></TD`
75			`></TR`
76			`></TABLE`
77			`><HR`
78			`ALIGN="LEFT"`
79			`WIDTH="100%"></DIV`
80			`><DIV`
81			`CLASS="SECT1"`
82			`><H1`
83			`CLASS="SECT1"`
84			`><A`
85			`NAME="AAED2000">ARM/ARM9 Agilent AAED2000</H1`
86			`><DIV`
87			`CLASS="SECT2"`
88			`><H2`
89			`CLASS="SECT2"`
90			`><A`
91			`NAME="AEN5379">Overview</H2`
92			`><P`
93			`>RedBoot supports the serial and ethernet ports`
94			`on the board. The default serial port settings are 38400,8,N,1.`
95			`RedBoot also supports flash management on the AAED2000.</P`
96			`><P`
97			`>The following RedBoot configurations are supported:`
98
99			`<DIV`
100			`CLASS="INFORMALTABLE"`
101			`><A`
102			`NAME="AEN5389"><P`
103			`></P`
104			`><TABLE`
105			`BORDER="1"`
106			`CLASS="CALSTABLE"`
107			`><THEAD`
108			`><TR`
109			`><TH`
110			`ALIGN="LEFT"`
111			`VALIGN="TOP"`
112			`>Configuration</TH`
113			`><TH`
114			`ALIGN="LEFT"`
115			`VALIGN="TOP"`
116			`>Mode</TH`
117			`><TH`
118			`ALIGN="LEFT"`
119			`VALIGN="TOP"`
120			`>Description</TH`
121			`><TH`
122			`ALIGN="LEFT"`
123			`VALIGN="TOP"`
124			`>File</TH`
125			`></TR`
126			`></THEAD`
127			`><TBODY`
128			`><TR`
129			`><TD`
130			`ALIGN="LEFT"`
131			`VALIGN="TOP"`
132			`>ROMRAM</TD`
133			`><TD`
134			`ALIGN="LEFT"`
135			`VALIGN="TOP"`
136			`>[ROMRAM]</TD`
137			`><TD`
138			`ALIGN="LEFT"`
139			`VALIGN="TOP"`
140			`>RedBoot running from RAM, but contained in the`
141			`board's flash boot sector.</TD`
142			`><TD`
143			`ALIGN="LEFT"`
144			`VALIGN="TOP"`
145			`>redboot_primary_ROMRAM.ecm</TD`
146			`></TR`
147			`><TR`
148			`><TD`
149			`ALIGN="LEFT"`
150			`VALIGN="TOP"`
151			`>RAM</TD`
152			`><TD`
153			`ALIGN="LEFT"`
154			`VALIGN="TOP"`
155			`>[RAM]</TD`
156			`><TD`
157			`ALIGN="LEFT"`
158			`VALIGN="TOP"`
159			`>RedBoot running from RAM with RedBoot in the`
160			`flash boot sector.</TD`
161			`><TD`
162			`ALIGN="LEFT"`
163			`VALIGN="TOP"`
164			`>redboot_primary_RAM.ecm</TD`
165			`></TR`
166			`></TBODY`
167			`></TABLE`
168			`><P`
169			`></P`
170			`></DIV`
171			`></P`
172			`></DIV`
173			`><DIV`
174			`CLASS="SECT2"`
175			`><H2`
176			`CLASS="SECT2"`
177			`><A`
178			`NAME="AEN5408">Initial Installation Method</H2`
179			`><P`
180			`>It is possible to install RedBoot in one of two ways. Either as`
181			`the primary bootmonitor on the board (installed to blocks 0-1 of the`
182			`flash) or as the secondary bootmonitor on the board (installed to`
183			`blocks 1-2 of the flash).</P`
184			`><P`
185			`>Presently, only the former method is supported.</P`
186			`><DIV`
187			`CLASS="SECT3"`
188			`><H3`
189			`CLASS="SECT3"`
190			`><A`
191			`NAME="AEN5412">RedBoot as Primary Bootmonitor</H3`
192			`><P`
193			`>RedBoot is installed in flash using the on-board ARM Boot`
194			`Monitor.</P`
195			`><P`
196			`>Boot the board while pressing SPACE. This should bring up the`
197			`Boot Monitor:`
198			`<TABLE`
199			`BORDER="5"`
200			`BGCOLOR="#E0E0F0"`
201			`WIDTH="70%"`
202			`><TR`
203			`><TD`
204			`><PRE`
205			`CLASS="SCREEN"`
206			`>ARM bootPROM [Version 1.3] Rebuilt on Jul 16 2001 at 16:21:36`
207			`Running on a P920 board Evaluation Board`
208			`Board Revision V1.0, ARM920T processor Processor`
209			`Memory Size is 32MBytes, Flash Size is 32MBytes`
210			`Copyright (c) ARM Limited 1999 - 2001. All rights reserved.`
211			`Board designed by ARM Limited`
212			`Hardware support provided at http://www.arm.com/`
213			`For help on the available commands type ? or h`
214			`boot Monitor > </PRE`
215			`></TD`
216			`></TR`
217			`></TABLE`
218			`>`
219
220			`Download the RAM mode image of RedBoot configured as a primary`
221			`bootmonitor using the ARM bootmonitor's SREC-download command:`
222
223			`<TABLE`
224			`BORDER="5"`
225			`BGCOLOR="#E0E0F0"`
226			`WIDTH="70%"`
227			`><TR`
228			`><TD`
229			`><PRE`
230			`CLASS="SCREEN"`
231			`>boot Monitor > <TT`
232			`CLASS="USERINPUT"`
233			`><B`
234			`>m</B`
235			`></TT`
236			`>`
237			`Load Motorola S-Record image into memory and execute it`
238			`The S-Record loader only accepts input on the serial port.`
239			`Record addresses must be between 0x00008000 and 0x01E0F510.`
240			`Type Ctrl/C to exit loader.</PRE`
241			`></TD`
242			`></TR`
243			`></TABLE`
244			`>`
245
246			`Use the terminal emulator's ASCII upload command, or (on Linux) simply`
247			`cat the file to the serial port:`
248
249			`<TABLE`
250			`BORDER="5"`
251			`BGCOLOR="#E0E0F0"`
252			`WIDTH="70%"`
253			`><TR`
254			`><TD`
255			`><PRE`
256			`CLASS="SCREEN"`
257			`>$ <TT`
258			`CLASS="USERINPUT"`
259			`><B`
260			`>cat redboot_primary_RAM/redboot.srec >/dev/ttyS1</B`
261			`></TT`
262			`></PRE`
263			`></TD`
264			`></TR`
265			`></TABLE`
266			`>`
267
268			`You should see RedBoot start up:`
269
270			`<TABLE`
271			`BORDER="5"`
272			`BGCOLOR="#E0E0F0"`
273			`WIDTH="70%"`
274			`><TR`
275			`><TD`
276			`><PRE`
277			`CLASS="SCREEN"`
278			`>FLASH configuration checksum error or invalid key`
279			`Ethernet eth0: MAC address 00:30:d3:03:04:99`
280			`IP: 192.168.42.111, Default server: 192.168.42.3`
281
282			`RedBoot(tm) bootstrap and debug environment [RAM]`
283			`Non-certified release, version UNKNOWN - built 13:15:40, Nov 9 2001`
284
285			`Platform: AAED2000 system (ARM9) [Primary]`
286			`Copyright (C) 2000, 2001, Red Hat, Inc.`
287
288			`RAM: 0x00000000-0x01f80000, 0x0006f208-0x01f51000 available`
289			`FLASH: 0x60000000 - 0x62000000, 256 blocks of 0x00020000 bytes each.`
290			`RedBoot></PRE`
291			`></TD`
292			`></TR`
293			`></TABLE`
294			`>`
295
296			`As can be seen from the output above, the network has been configured`
297			`to give the board an IP address and information about the default`
298			`server. If things are not set up on your network, you can still`
299			`continue, but use the Y-modem download method when loading the RedBoot`
300			`ROMRAM mode image.`
301
302			`Now initialize RedBoot's FIS:`
303
304			`<TABLE`
305			`BORDER="5"`
306			`BGCOLOR="#E0E0F0"`
307			`WIDTH="70%"`
308			`><TR`
309			`><TD`
310			`><PRE`
311			`CLASS="SCREEN"`
312			`>RedBoot> <TT`
313			`CLASS="USERINPUT"`
314			`><B`
315			`>fis init</B`
316			`></TT`
317			`>`
318			`About to initialize [format] FLASH image system - continue (y/n)? <TT`
319			`CLASS="USERINPUT"`
320			`><B`
321			`>y</B`
322			`></TT`
323			`>`
324			`*** Initialize FLASH Image System`
325			`Warning: device contents not erased, some blocks may not be usable`
326			`... Erase from 0x61fe0000-0x62000000: .`
327			`... Program from 0x01f5f000-0x01f5f300 at 0x61fe0000: .</PRE`
328			`></TD`
329			`></TR`
330			`></TABLE`
331			`>`
332
333			`Download the ROMRAM mode image of RedBoot via ethernet:`
334
335			`<TABLE`
336			`BORDER="5"`
337			`BGCOLOR="#E0E0F0"`
338			`WIDTH="70%"`
339			`><TR`
340			`><TD`
341			`><PRE`
342			`CLASS="SCREEN"`
343			`>RedBoot> <TT`
344			`CLASS="USERINPUT"`
345			`><B`
346			`>load -b %{FREEMEMLO} redboot_primary_ROMRAM/redboot.srec</B`
347			`></TT`
348			`></PRE`
349			`></TD`
350			`></TR`
351			`></TABLE`
352			`>`
353
354			`or using serial Y-modem protocol:`
355
356			`<TABLE`
357			`BORDER="5"`
358			`BGCOLOR="#E0E0F0"`
359			`WIDTH="70%"`
360			`><TR`
361			`><TD`
362			`><PRE`
363			`CLASS="SCREEN"`
364			`>RedBoot> <TT`
365			`CLASS="USERINPUT"`
366			`><B`
367			`>load -mode ymodem -b %{FREEMEMLO}</B`
368			`></TT`
369			`></PRE`
370			`></TD`
371			`></TR`
372			`></TABLE`
373			`>`
374
375			`(Use the terminal emulator's Y-modem upload command to send the file`
376			`<TT`
377			`CLASS="FILENAME"`
378			`>redboot_primary_ROMRAM/redboot.srec</TT`
379			`>.)`
380
381			`When the image has been downloaded, program it into flash:`
382
383			`<TABLE`
384			`BORDER="5"`
385			`BGCOLOR="#E0E0F0"`
386			`WIDTH="70%"`
387			`><TR`
388			`><TD`
389			`><PRE`
390			`CLASS="SCREEN"`
391			`>Address offset = 0x00ff8000`
392			`Entry point: 0x00008040, address range: 0x00008000-0x0002da80`
393			`RedBoot> <TT`
394			`CLASS="USERINPUT"`
395			`><B`
396			`>fi cr RedBoot</B`
397			`></TT`
398			`>`
399			`An image named 'RedBoot' exists - continue (y/n)? <TT`
400			`CLASS="USERINPUT"`
401			`><B`
402			`>y</B`
403			`></TT`
404			`>`
405			`* CAUTION * about to program 'RedBoot'`
406			`at 0x60000000..0x6003ffff from 0x00100000 - continue (y/n)? <TT`
407			`CLASS="USERINPUT"`
408			`><B`
409			`>y</B`
410			`></TT`
411			`>`
412			`... Erase from 0x60000000-0x60040000: ..`
413			`... Program from 0x00100000-0x00140000 at 0x60000000: ..`
414			`... Erase from 0x61fe0000-0x62000000: .`
415			`... Program from 0x01f5f000-0x01f7f000 at 0x61fe0000: .</PRE`
416			`></TD`
417			`></TR`
418			`></TABLE`
419			`>`
420
421			`Now reset the board. You should see the RedBoot banner.</P`
422			`></DIV`
423			`></DIV`
424			`><DIV`
425			`CLASS="SECT2"`
426			`><H2`
427			`CLASS="SECT2"`
428			`><A`
429			`NAME="AEN5434">Special RedBoot Commands</H2`
430			`><P`
431			`>The <B`
432			`CLASS="COMMAND"`
433			`>exec</B`
434			`> command which allows the loading`
435			`and execution of Linux kernels,`
436			`is supported for this board (see <A`
437			`HREF="executing-programs.html"`
438			`>the Section called <I`
439			`>Executing Programs from RedBoot</I`
440			`> in Chapter 2</A`
441			`>). The <B`
442			`CLASS="COMMAND"`
443			`>exec</B`
444			`> parameters used for the AAED2000 are:</P`
445			`><P`
446			`></P`
447			`><DIV`
448			`CLASS="VARIABLELIST"`
449			`><DL`
450			`><DT`
451			`>-b <TT`
452			`CLASS="REPLACEABLE"`
453			`><I`
454			`><addr></I`
455			`></TT`
456			`></DT`
457			`><DD`
458			`><P`
459			`>Location Linux kernel was loaded to</P`
460			`></DD`
461			`><DT`
462			`>-l <TT`
463			`CLASS="REPLACEABLE"`
464			`><I`
465			`><len></I`
466			`></TT`
467			`></DT`
468			`><DD`
469			`><P`
470			`>Length of kernel</P`
471			`></DD`
472			`><DT`
473			`>-c <TT`
474			`CLASS="REPLACEABLE"`
475			`><I`
476			`>"params"</I`
477			`></TT`
478			`></DT`
479			`><DD`
480			`><P`
481			`>Parameters passed to kernel</P`
482			`></DD`
483			`><DT`
484			`>-r <TT`
485			`CLASS="REPLACEABLE"`
486			`><I`
487			`><addr></I`
488			`></TT`
489			`></DT`
490			`><DD`
491			`><P`
492			`>'initrd' ramdisk location</P`
493			`></DD`
494			`><DT`
495			`>-s <TT`
496			`CLASS="REPLACEABLE"`
497			`><I`
498			`><len></I`
499			`></TT`
500			`></DT`
501			`><DD`
502			`><P`
503			`>Length of initrd ramdisk</P`
504			`></DD`
505			`></DL`
506			`></DIV`
507			`><P`
508			`>The parameters for kernel image base and size are automatically`
509			`set after a load operation. So one way of starting the kernel would`
510			`be:`
511
512			`<TABLE`
513			`BORDER="5"`
514			`BGCOLOR="#E0E0F0"`
515			`WIDTH="70%"`
516			`><TR`
517			`><TD`
518			`><PRE`
519			`CLASS="SCREEN"`
520			`>RedBoot> <TT`
521			`CLASS="USERINPUT"`
522			`><B`
523			`>load -r -b 0x100000 zImage</B`
524			`></TT`
525			`>`
526			`Raw file loaded 0x00100000-0x001a3d6c`
527			`RedBoot> exec -c "console=ttyAC0,38400"`
528			`Using base address 0x00100000 and length 0x000a3d6c`
529			`Uncompressing Linux.....</PRE`
530			`></TD`
531			`></TR`
532			`></TABLE`
533			`>`
534
535			`An image could also be put in flash and started directly:`
536
537			`<TABLE`
538			`BORDER="5"`
539			`BGCOLOR="#E0E0F0"`
540			`WIDTH="70%"`
541			`><TR`
542			`><TD`
543			`><PRE`
544			`CLASS="SCREEN"`
545			`>RedBoot> <TT`
546			`CLASS="USERINPUT"`
547			`><B`
548			`>exec -b 0x60040000 -l 0xc0000 -c "console=ttyAC0,38400"</B`
549			`></TT`
550			`>`
551			`Uncompressing Linux.....</PRE`
552			`></TD`
553			`></TR`
554			`></TABLE`
555			`> </P`
556			`></DIV`
557			`><DIV`
558			`CLASS="SECT2"`
559			`><H2`
560			`CLASS="SECT2"`
561			`><A`
562			`NAME="AEN5471">Memory Maps</H2`
563			`><P`
564			`>The MMU page tables are located at 0x4000. <DIV`
565			`CLASS="NOTE"`
566			`><BLOCKQUOTE`
567			`CLASS="NOTE"`
568			`><P`
569			`><B`
570			`>NOTE: </B`
571			`>The virtual memory maps in this section use a C and B column to indicate`
572			`whether or not the region is cached (C) or buffered (B).</P`
573			`></BLOCKQUOTE`
574			`></DIV`
575			`><TABLE`
576			`BORDER="5"`
577			`BGCOLOR="#E0E0F0"`
578			`WIDTH="70%"`
579			`><TR`
580			`><TD`
581			`><PRE`
582			`CLASS="PROGRAMLISTING"`
583			`>Physical Address Range Description`
584			`----------------------- ----------------------------------`
585			`0x00000000 - 0x01ffffff Flash`
586			`0x10000000 - 0x100fffff Ethernet`
587			`0x30000000 - 0x300fffff Board registers`
588			`0x40000000 - 0x4fffffff PCMCIA Slot (0)`
589			`0x50000000 - 0x5fffffff Compact Flash Slot (1)`
590			`0x80000000 - 0x800037ff I/O registers`
591			`0xb0060000 - 0xb00fffff On-chip SRAM`
592			`0xf0000000 - 0xfd3fffff SDRAM`
593
594			`Virtual Address Range C B Description`
595			`----------------------- - - ----------------------------------`
596			`0x00000000 - 0x01f7ffff Y Y SDRAM`
597			`0x01f80000 - 0x01ffffff Y Y SDRAM (used for LCD frame buffer)`
598			`0x10000000 - 0x100fffff N N Ethernet`
599			`0x30000000 - 0x300fffff N N Board registers`
600			`0x40000000 - 0x4fffffff N N PCMCIA Slot (0)`
601			`0x50000000 - 0x5fffffff N N Compact Flash Slot (1)`
602			`0x60000000 - 0x61ffffff N N Flash`
603			`0x80000000 - 0x800037ff N N I/O registers`
604			`0xf0000000 - 0xffffffff N N SDRAM (uncached) </PRE`
605			`></TD`
606			`></TR`
607			`></TABLE`
608			`></P`
609			`></DIV`
610			`><DIV`
611			`CLASS="SECT2"`
612			`><H2`
613			`CLASS="SECT2"`
614			`><A`
615			`NAME="AEN5478">Rebuilding RedBoot</H2`
616			`><P`
617			`>These shell variables provide the platform-specific information`
618			`needed for building RedBoot according to the procedure described in`
619			`<A`
620			`HREF="rebuilding-redboot.html"`
621			`>Chapter 3</A`
622			`>:`
623			`<TABLE`
624			`BORDER="5"`
625			`BGCOLOR="#E0E0F0"`
626			`WIDTH="70%"`
627			`><TR`
628			`><TD`
629			`><PRE`
630			`CLASS="PROGRAMLISTING"`
631			`>export TARGET=aaed`
632			`export ARCH_DIR=arm`
633			`export PLATFORM_DIR=arm9/aaed2000</PRE`
634			`></TD`
635			`></TR`
636			`></TABLE`
637			`></P`
638			`><P`
639			`>The names of configuration files are listed above with the`
640			`description of the associated modes.</P`
641			`></DIV`
642			`></DIV`
643			`><DIV`
644			`CLASS="NAVFOOTER"`
645			`><HR`
646			`ALIGN="LEFT"`
647			`WIDTH="100%"><TABLE`
648			`SUMMARY="Footer navigation table"`
649			`WIDTH="100%"`
650			`BORDER="0"`
651			`CELLPADDING="0"`
652			`CELLSPACING="0"`
653			`><TR`
654			`><TD`
655			`WIDTH="33%"`
656			`ALIGN="left"`
657			`VALIGN="top"`
658			`><A`
659			`HREF="edb7xxx.html"`
660			`ACCESSKEY="P"`
661			`>Prev</A`
662			`></TD`
663			`><TD`
664			`WIDTH="34%"`
665			`ALIGN="center"`
666			`VALIGN="top"`
667			`><A`
668			`HREF="ecos-ref.html"`
669			`ACCESSKEY="H"`
670			`>Home</A`
671			`></TD`
672			`><TD`
673			`WIDTH="33%"`
674			`ALIGN="right"`
675			`VALIGN="top"`
676			`><A`
677			`HREF="excaliburarm9.html"`
678			`ACCESSKEY="N"`
679			`>Next</A`
680			`></TD`
681			`></TR`
682			`><TR`
683			`><TD`
684			`WIDTH="33%"`
685			`ALIGN="left"`
686			`VALIGN="top"`
687			`>ARM/ARM7 Cirrus Logic EP7xxx (EDB7211, EDB7212, EDB7312)</TD`
688			`><TD`
689			`WIDTH="34%"`
690			`ALIGN="center"`
691			`VALIGN="top"`
692			`><A`
693			`HREF="installation-and-testing.html"`
694			`ACCESSKEY="U"`
695			`>Up</A`
696			`></TD`
697			`><TD`
698			`WIDTH="33%"`
699			`ALIGN="right"`
700			`VALIGN="top"`
701			`>ARM/ARM9 Altera Excalibur</TD`
702			`></TR`
703			`></TABLE`
704			`></DIV`
705			`></BODY`
706			`></HTML`
707			`>`