OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [doc/] [html/] [ref/] [at91.html] - Blame information for rev 629

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 28 unneback 
<!-- Copyright (C) 2003 Red Hat, Inc.                                -->
2 
<!-- This material may be distributed only subject to the terms      -->
3 
<!-- and conditions set forth in the Open Publication License, v1.0  -->
4 
<!-- or later (the latest version is presently available at          -->
5 
<!-- http://www.opencontent.org/openpub/).                           -->
6 
<!-- Distribution of the work or derivative of the work in any       -->
7 
<!-- standard (paper) book form is prohibited unless prior           -->
8 
<!-- permission is obtained from the copyright holder.               -->
9 
<HTML
10 
><HEAD
11 
><TITLE
12 
>ARM/ARM7 Atmel AT91 Evaluation Board (EB40)</TITLE
13 
><meta name="MSSmartTagsPreventParsing" content="TRUE">
14 
<META
15 
NAME="GENERATOR"
16 
CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
17 
"><LINK
18 
REL="HOME"
19 
TITLE="eCos Reference Manual"
20 
HREF="ecos-ref.html"><LINK
21 
REL="UP"
22 
TITLE="Installation and Testing"
23 
HREF="installation-and-testing.html"><LINK
24 
REL="PREVIOUS"
25 
TITLE="ARM/ARM7+ARM9 ARM PID Board and EPI Dev7+Dev9"
26 
HREF="pid.html"><LINK
27 
REL="NEXT"
28 
TITLE="ARM/ARM7 Cirrus Logic EP7xxx (EDB7211, EDB7212, EDB7312) "
29 
HREF="edb7xxx.html"></HEAD
30 
><BODY
31 
CLASS="SECT1"
32 
BGCOLOR="#FFFFFF"
33 
TEXT="#000000"
34 
LINK="#0000FF"
35 
VLINK="#840084"
36 
ALINK="#0000FF"
37 
><DIV
38 
CLASS="NAVHEADER"
39 
><TABLE
40 
SUMMARY="Header navigation table"
41 
WIDTH="100%"
42 
BORDER="0"
43 
CELLPADDING="0"
44 
CELLSPACING="0"
45 
><TR
46 
><TH
47 
COLSPAN="3"
48 
ALIGN="center"
49 
>eCos Reference Manual</TH
50 
></TR
51 
><TR
52 
><TD
53 
WIDTH="10%"
54 
ALIGN="left"
55 
VALIGN="bottom"
56 
><A
57 
HREF="pid.html"
58 
ACCESSKEY="P"
59 
>Prev</A
60 
></TD
61 
><TD
62 
WIDTH="80%"
63 
ALIGN="center"
64 
VALIGN="bottom"
65 
>Chapter 5. Installation and Testing</TD
66 
><TD
67 
WIDTH="10%"
68 
ALIGN="right"
69 
VALIGN="bottom"
70 
><A
71 
HREF="edb7xxx.html"
72 
ACCESSKEY="N"
73 
>Next</A
74 
></TD
75 
></TR
76 
></TABLE
77 
><HR
78 
ALIGN="LEFT"
79 
WIDTH="100%"></DIV
80 
><DIV
81 
CLASS="SECT1"
82 
><H1
83 
CLASS="SECT1"
84 
><A
85 
NAME="AT91">ARM/ARM7 Atmel AT91 Evaluation Board (EB40)</H1
86 
><DIV
87 
CLASS="SECT2"
88 
><H2
89 
CLASS="SECT2"
90 
><A
91 
NAME="AEN5256">Overview</H2
92 
><P
93 
>RedBoot supports both serial ports.
94 
The default serial port settings are 38400,8,N,1. RedBoot
95 
also supports minimal flash management on the EB40.
96 
However, since the flash device (AT29LV1024) is so small (only the upper 64K is
97 
available for general use), only the simple flash write command 'fis
98 
write' is supported.</P
99 
><P
100 
>The following RedBoot configurations are supported:
101 
 
102 
      <DIV
103 
CLASS="INFORMALTABLE"
104 
><A
105 
NAME="AEN5266"><P
106 
></P
107 
><TABLE
108 
BORDER="1"
109 
CLASS="CALSTABLE"
110 
><THEAD
111 
><TR
112 
><TH
113 
ALIGN="LEFT"
114 
VALIGN="TOP"
115 
>Configuration</TH
116 
><TH
117 
ALIGN="LEFT"
118 
VALIGN="TOP"
119 
>Mode</TH
120 
><TH
121 
ALIGN="LEFT"
122 
VALIGN="TOP"
123 
>Description</TH
124 
><TH
125 
ALIGN="LEFT"
126 
VALIGN="TOP"
127 
>File</TH
128 
></TR
129 
></THEAD
130 
><TBODY
131 
><TR
132 
><TD
133 
ALIGN="LEFT"
134 
VALIGN="TOP"
135 
>ROM</TD
136 
><TD
137 
ALIGN="LEFT"
138 
VALIGN="TOP"
139 
>[ROM]</TD
140 
><TD
141 
ALIGN="LEFT"
142 
VALIGN="TOP"
143 
>RedBoot running from the board's flash boot
144 
              sector.</TD
145 
><TD
146 
ALIGN="LEFT"
147 
VALIGN="TOP"
148 
>redboot_ROM.ecm</TD
149 
></TR
150 
><TR
151 
><TD
152 
ALIGN="LEFT"
153 
VALIGN="TOP"
154 
>RAM</TD
155 
><TD
156 
ALIGN="LEFT"
157 
VALIGN="TOP"
158 
>[RAM]</TD
159 
><TD
160 
ALIGN="LEFT"
161 
VALIGN="TOP"
162 
>RedBoot running from RAM with RedBoot in the
163 
              flash boot sector.</TD
164 
><TD
165 
ALIGN="LEFT"
166 
VALIGN="TOP"
167 
>redboot_RAM.ecm</TD
168 
></TR
169 
><TR
170 
><TD
171 
ALIGN="LEFT"
172 
VALIGN="TOP"
173 
>ROMRAM</TD
174 
><TD
175 
ALIGN="LEFT"
176 
VALIGN="TOP"
177 
>[ROMRAM]</TD
178 
><TD
179 
ALIGN="LEFT"
180 
VALIGN="TOP"
181 
>RedBoot running from RAM, but contained in the
182 
              board's flash boot sector.</TD
183 
><TD
184 
ALIGN="LEFT"
185 
VALIGN="TOP"
186 
>redboot_ROMRAM.ecm</TD
187 
></TR
188 
></TBODY
189 
></TABLE
190 
><P
191 
></P
192 
></DIV
193 
></P
194 
></DIV
195 
><DIV
196 
CLASS="SECT2"
197 
><H2
198 
CLASS="SECT2"
199 
><A
200 
NAME="AEN5290">Initial Installation Method</H2
201 
><P
202 
>This development board comes with ARM's debug tool, Angel, installed in flash.
203 
At this time, Angel will not be replaced.  Rather, RedBoot will be placed in
204 
the alternate half of flash.  Switch SW1 is used which monitor to boot.  Selecting
205 
SW1 to "lower mem" will choose Angel.  Select SW1 to "Upper mem" for RedBoot once
206 
it has been installed.</P
207 
><P
208 
>Set SW1 to "lower mem" and connect serial port A to a host computer.  Using GDB
209 
from the host and Angel on the board, download the RAM mode image of RedBoot
210 
to the board. SW1 should then be set to "upper mem" just before starting RedBoot using
211 
the 'cont' command. Once RedBoot is started, the Angel session must be interrupted (on
212 
Linux this can be done using ^Z).  Follow this by connecting to the board using
213 
minicom at 38400-8N1.  At this point, RedBoot will be running on the board in
214 
RAM.  Now, download the ROMRAM mode image and program it to flash.
215 
<TABLE
216 
BORDER="5"
217 
BGCOLOR="#E0E0F0"
218 
WIDTH="70%"
219 
><TR
220 
><TD
221 
><PRE
222 
CLASS="SCREEN"
223 
><TT
224 
CLASS="USERINPUT"
225 
><B
226 
>arm-elf-gdb redboot_RAM.elf</B
227 
></TT
228 
>
229 
(gdb) <TT
230 
CLASS="USERINPUT"
231 
><B
232 
>tar rdi s=/dev/ttyS0</B
233 
></TT
234 
>
235 
Angel Debug Monitor (serial) 1.04 (Advanced RISC Machines SDT 2.5) for
236 
AT91EB40 (2.00)
237 
Angel Debug Monitor rebuilt on Apr 07 2000 at 12:40:31
238 
Serial Rate:   9600
239 
Connected to ARM RDI target.
240 
(gdb) <TT
241 
CLASS="USERINPUT"
242 
><B
243 
>set $cpsr=0xd3</B
244 
></TT
245 
>
246 
(gdb) <TT
247 
CLASS="USERINPUT"
248 
><B
249 
>load</B
250 
></TT
251 
>
252 
Loading section .rom_vectors, size 0x40 lma 0x2020000
253 
Loading section .text, size 0x7fd8 lma 0x2020040
254 
Loading section .rodata, size 0x15a0 lma 0x2028018
255 
Loading section .data, size 0x2e4 lma 0x20295b8
256 
Start address 0x2020040 , load size 39068
257 
Transfer rate: 6250 bits/sec, 500 bytes/write.</PRE
258 
></TD
259 
></TR
260 
></TABLE
261 
>
262 
At this point, set SW1 to "upper mem".
263 
<TABLE
264 
BORDER="5"
265 
BGCOLOR="#E0E0F0"
266 
WIDTH="70%"
267 
><TR
268 
><TD
269 
><PRE
270 
CLASS="SCREEN"
271 
>(gdb) <TT
272 
CLASS="USERINPUT"
273 
><B
274 
>cont</B
275 
></TT
276 
>
277 
Continuing.</PRE
278 
></TD
279 
></TR
280 
></TABLE
281 
>
282 
At this point, suspend the GDB session (use Ctrl-Z) and start a
283 
terminal emulator:
284 
<TABLE
285 
BORDER="5"
286 
BGCOLOR="#E0E0F0"
287 
WIDTH="70%"
288 
><TR
289 
><TD
290 
><PRE
291 
CLASS="SCREEN"
292 
>RedBoot&#62; <TT
293 
CLASS="USERINPUT"
294 
><B
295 
>version</B
296 
></TT
297 
>
298 
 
299 
RedBoot(tm) bootstrap and debug environment [RAM]
300 
Non-certified release, version UNKNOWN - built 14:09:27, Jul 20 2001
301 
 
302 
Platform: Atmel AT91/EB40 (ARM7TDMI)
303 
Copyright (C) 2000, 2001, Red Hat, Inc.
304 
 
305 
RAM: 0x02000000-0x02080000, 0x020116d8-0x0207fd00 available
306 
FLASH: 0x01010000 - 0x01020000, 256 blocks of 0x00000100 bytes each.
307 
 
308 
RedBoot&#62; <TT
309 
CLASS="USERINPUT"
310 
><B
311 
>load -m ymodem -b %{FREEMEMLO}</B
312 
></TT
313 
></PRE
314 
></TD
315 
></TR
316 
></TABLE
317 
>
318 
Use minicom to send the file redboot_ROMRAM.srec via YModem.
319 
<TABLE
320 
BORDER="5"
321 
BGCOLOR="#E0E0F0"
322 
WIDTH="70%"
323 
><TR
324 
><TD
325 
><PRE
326 
CLASS="SCREEN"
327 
>RedBoot&#62; <TT
328 
CLASS="USERINPUT"
329 
><B
330 
>fi wr -f 0x01010000 -b %{FREEMEMLO} -l 0xe100</B
331 
></TT
332 
></PRE
333 
></TD
334 
></TR
335 
></TABLE
336 
>
337 
Press the "reset" pushbutton and RedBoot
338 
should come up on the board.</P
339 
></DIV
340 
><DIV
341 
CLASS="SECT2"
342 
><H2
343 
CLASS="SECT2"
344 
><A
345 
NAME="AEN5306">Special RedBoot Commands</H2
346 
><P
347 
>None.</P
348 
></DIV
349 
><DIV
350 
CLASS="SECT2"
351 
><H2
352 
CLASS="SECT2"
353 
><A
354 
NAME="AEN5309">Memory Maps</H2
355 
><P
356 
>This processor has no MMU, so the only memory map is for physical addresses.
357 
<TABLE
358 
BORDER="5"
359 
BGCOLOR="#E0E0F0"
360 
WIDTH="70%"
361 
><TR
362 
><TD
363 
><PRE
364 
CLASS="PROGRAMLISTING"
365 
>Physical Address Range     Description
366 
-----------------------    ----------------------------------
367 
0x00000000 - 0x00000fff    On-chip SRAM
368 
0x01000000 - 0x0101ffff    Flash
369 
0x02000000 - 0x0207ffff    RAM
370 
0xffe00000 - 0xffffffff    I/O registers
371 
 
372 
The flash based RedBoot image occupies virtual addresses 0x01010000 - 0x0101dfff</PRE
373 
></TD
374 
></TR
375 
></TABLE
376 
></P
377 
></DIV
378 
><DIV
379 
CLASS="SECT2"
380 
><H2
381 
CLASS="SECT2"
382 
><A
383 
NAME="AEN5313">Rebuilding RedBoot</H2
384 
><P
385 
>These shell variables provide the platform-specific information
386 
needed for building RedBoot according to the procedure described in
387 
<A
388 
HREF="rebuilding-redboot.html"
389 
>Chapter 3</A
390 
>:
391 
<TABLE
392 
BORDER="5"
393 
BGCOLOR="#E0E0F0"
394 
WIDTH="70%"
395 
><TR
396 
><TD
397 
><PRE
398 
CLASS="PROGRAMLISTING"
399 
>export TARGET=eb40
400 
export ARCH_DIR=arm
401 
export PLATFORM_DIR=at91</PRE
402 
></TD
403 
></TR
404 
></TABLE
405 
></P
406 
><P
407 
>The names of configuration files are listed above with the
408 
description of the associated modes.</P
409 
></DIV
410 
></DIV
411 
><DIV
412 
CLASS="NAVFOOTER"
413 
><HR
414 
ALIGN="LEFT"
415 
WIDTH="100%"><TABLE
416 
SUMMARY="Footer navigation table"
417 
WIDTH="100%"
418 
BORDER="0"
419 
CELLPADDING="0"
420 
CELLSPACING="0"
421 
><TR
422 
><TD
423 
WIDTH="33%"
424 
ALIGN="left"
425 
VALIGN="top"
426 
><A
427 
HREF="pid.html"
428 
ACCESSKEY="P"
429 
>Prev</A
430 
></TD
431 
><TD
432 
WIDTH="34%"
433 
ALIGN="center"
434 
VALIGN="top"
435 
><A
436 
HREF="ecos-ref.html"
437 
ACCESSKEY="H"
438 
>Home</A
439 
></TD
440 
><TD
441 
WIDTH="33%"
442 
ALIGN="right"
443 
VALIGN="top"
444 
><A
445 
HREF="edb7xxx.html"
446 
ACCESSKEY="N"
447 
>Next</A
448 
></TD
449 
></TR
450 
><TR
451 
><TD
452 
WIDTH="33%"
453 
ALIGN="left"
454 
VALIGN="top"
455 
>ARM/ARM7+ARM9 ARM PID Board and EPI Dev7+Dev9</TD
456 
><TD
457 
WIDTH="34%"
458 
ALIGN="center"
459 
VALIGN="top"
460 
><A
461 
HREF="installation-and-testing.html"
462 
ACCESSKEY="U"
463 
>Up</A
464 
></TD
465 
><TD
466 
WIDTH="33%"
467 
ALIGN="right"
468 
VALIGN="top"
469 
>ARM/ARM7 Cirrus Logic EP7xxx (EDB7211, EDB7212, EDB7312)</TD
470 
></TR
471 
></TABLE
472 
></DIV
473 
></BODY
474 
></HTML
475 
>

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.