URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [doc/] [html/] [ref/] [se7751.html] - Blame information for rev 588

Go to most recent revision | Details | Compare with Previous | View Log


<!-- Copyright (C) 2003 Red Hat, Inc.                                -->
<!-- This material may be distributed only subject to the terms      -->
<!-- and conditions set forth in the Open Publication License, v1.0  -->
<!-- or later (the latest version is presently available at          -->
<!-- http://www.opencontent.org/openpub/).                           -->
<!-- Distribution of the work or derivative of the work in any       -->
<!-- standard (paper) book form is prohibited unless prior           -->
<!-- permission is obtained from the copyright holder.               -->
<HTML
><HEAD
><TITLE
>SuperH/SH4(SH7751) Hitachi Solution Engine 7751</TITLE
><meta name="MSSmartTagsPreventParsing" content="TRUE">
<META
NAME="GENERATOR"
CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
"><LINK
REL="HOME"
TITLE="eCos Reference Manual"
HREF="ecos-ref.html"><LINK
REL="UP"
TITLE="Installation and Testing"
HREF="installation-and-testing.html"><LINK
REL="PREVIOUS"
TITLE="SuperH/SH3(SH77X9) Hitachi Solution Engine 77X9"
HREF="se77x9.html"><LINK
REL="NEXT"
TITLE="The eCos Hardware Abstraction Layer (HAL)"
HREF="the-ecos-hardware-abstraction-layer.html"></HEAD
><BODY
CLASS="SECT1"
BGCOLOR="#FFFFFF"
TEXT="#000000"
LINK="#0000FF"
VLINK="#840084"
ALINK="#0000FF"
><DIV
CLASS="NAVHEADER"
><TABLE
SUMMARY="Header navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TH
COLSPAN="3"
ALIGN="center"
>eCos Reference Manual</TH
></TR
><TR
><TD
WIDTH="10%"
ALIGN="left"
VALIGN="bottom"
><A
HREF="se77x9.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="80%"
ALIGN="center"
VALIGN="bottom"
>Chapter 5. Installation and Testing</TD
><TD
WIDTH="10%"
ALIGN="right"
VALIGN="bottom"
><A
HREF="the-ecos-hardware-abstraction-layer.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
></TABLE
><HR
ALIGN="LEFT"
WIDTH="100%"></DIV
><DIV
CLASS="SECT1"
><H1
CLASS="SECT1"
><A
NAME="SE7751">SuperH/SH4(SH7751) Hitachi Solution Engine 7751</H1
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN7589">Overview</H2
><P
>RedBoot uses
the COM1 serial port. The default serial port settings are 38400,8,N,1.
Ethernet is also supported using the 10-base T connector. Management
of onboard flash is also supported.</P
><P
>The following RedBoot configurations are supported:
 
      <DIV
CLASS="INFORMALTABLE"
><A
NAME="AEN7599"><P
></P
><TABLE
BORDER="1"
CLASS="CALSTABLE"
><THEAD
><TR
><TH
ALIGN="LEFT"
VALIGN="TOP"
>Configuration</TH
><TH
ALIGN="LEFT"
VALIGN="TOP"
>Mode</TH
><TH
ALIGN="LEFT"
VALIGN="TOP"
>Description</TH
><TH
ALIGN="LEFT"
VALIGN="TOP"
>File</TH
></TR
></THEAD
><TBODY
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>ROM</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>[ROM]</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RedBoot running from the board's flash boot
              sector.</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>redboot_ROM.ecm</TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RAM</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>[RAM]</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RedBoot running from RAM with RedBoot in the
              flash boot sector.</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
>redboot_RAM.ecm</TD
></TR
></TBODY
></TABLE
><P
></P
></DIV
></P
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN7618">Initial Installation Method</H2
><P
>The Solution Engine ships with the Hitachi boot monitor in EPROM
which allows for initial programming of RedBoot:</P
><P
></P
><OL
TYPE="1"
><LI
><P
>Set switches SW5-3 and SW5-4 to ON [boot from EPROM]</P
></LI
><LI
><P
>Connect a serial cable to COM1 and power up the board.</P
></LI
><LI
><P
>After the boot monitor banner, invoke the flash
download/program command:<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>Ready &gt;<TT
CLASS="USERINPUT"
><B
>fl</B
></TT
></PRE
></TD
></TR
></TABLE
></P
></LI
><LI
><P
>The monitor should now ask for input:
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>Flash ROM data copy to RAM
Please Send A S-format Record</PRE
></TD
></TR
></TABLE
>At this point copy the
RedBoot ROM SREC file to the serial port:<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>$ <TT
CLASS="USERINPUT"
><B
>cat redboot_ROM.eprom.srec &gt; /dev/ttyS0</B
></TT
></PRE
></TD
></TR
></TABLE
>
Eventually you
should see something like<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="SCREEN"
>Start Addrs = A1000000
End Addrs = A1xxxxxx
Transfer complete</PRE
></TD
></TR
></TABLE
> from the monitor.</P
></LI
><LI
><P
>Set switch SW5-3 to OFF [boot from flash] and reboot the board. You
should now see the RedBoot banner.</P
></LI
></OL
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN7638">Special RedBoot Commands</H2
><P
>The <B
CLASS="COMMAND"
>exec</B
> command which allows the loading
and execution of Linux kernels
is supported for this board (see <A
HREF="executing-programs.html"
>the Section called <I
>Executing Programs from RedBoot</I
> in Chapter 2</A
>). The <B
CLASS="COMMAND"
>exec</B
> parameters used for the SE7751 are:</P
><P
></P
><DIV
CLASS="VARIABLELIST"
><DL
><DT
>-b <TT
CLASS="REPLACEABLE"
><I
>&lt;addr&#62;</I
></TT
></DT
><DD
><P
>Parameter block address. This is normally the first
page of the kernel image and defaults to 0x8c101000</P
></DD
><DT
>-i <TT
CLASS="REPLACEABLE"
><I
>&lt;addr&#62;</I
></TT
></DT
><DD
><P
>Start address of initrd
image</P
></DD
><DT
>-j <TT
CLASS="REPLACEABLE"
><I
>&lt;size&#62;</I
></TT
></DT
><DD
><P
>Size of initrd image</P
></DD
><DT
>-c <TT
CLASS="REPLACEABLE"
><I
>"args"</I
></TT
></DT
><DD
><P
>Kernel arguments string</P
></DD
><DT
>-m <TT
CLASS="REPLACEABLE"
><I
>&lt;flags&#62;</I
></TT
></DT
><DD
><P
>Mount rdonly flags. If set to a non-zero value the
root partition will be mounted read-only.</P
></DD
><DT
>-f <TT
CLASS="REPLACEABLE"
><I
>&lt;flags&#62;</I
></TT
></DT
><DD
><P
>RAM disk flags. Should normally be 0x4000</P
></DD
><DT
>-r <TT
CLASS="REPLACEABLE"
><I
>&lt;device number&#62;</I
></TT
></DT
><DD
><P
>Root device specification. /dev/ram is 0x0101</P
></DD
><DT
>-l <TT
CLASS="REPLACEABLE"
><I
>&lt;type&#62;</I
></TT
></DT
><DD
><P
>Loader type</P
></DD
></DL
></DIV
><P
>Finally the kernel entry address can be specified as an optional
argument. The default is 0x8c102000</P
><P
>On the SE7751, Linux expects to be loaded at address 0x8c101000 with
the entry point at 0x8c102000. This is configurable in the kernel
using the CONFIG_MEMORY_START option.</P
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN7687">Memory Maps</H2
><P
>RedBoot sets up the following memory map on the SE7751 board.<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>Physical Address Range  Description
----------------------- -----------
0x80000000 - 0x803fffff Flash (MBM29LV160)
0x81000000 - 0x813fffff EPROM (M27C800)
0x8c000000 - 0x8fffffff SDRAM
0xb8000000 - 0xb8ffffff PCMCIA (MaruBun)
0xb9000000 - 0xb9ffffff Switches
0xba000000 - 0xbaffffff LEDs
0xbd000000 - 0xbdffffff PCI MEM space
0xbe200000 - 0xbe23ffff PCI Ctrl space
0xbe240000 - 0xbe27ffff PCI IO space</PRE
></TD
></TR
></TABLE
></P
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN7691">Ethernet Driver</H2
><P
>The ethernet driver uses a hardwired ESA which can, at present,
only be changed in CDL.</P
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN7694">Rebuilding RedBoot</H2
><P
>These shell variables provide the platform-specific information
needed for building RedBoot according to the procedure described in
<A
HREF="rebuilding-redboot.html"
>Chapter 3</A
>:
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>export TARGET=se7751
export ARCH_DIR=sh
export PLATFORM_DIR=se7751</PRE
></TD
></TR
></TABLE
></P
><P
>The names of configuration files are listed above with the
description of the associated modes.</P
></DIV
></DIV
><DIV
CLASS="NAVFOOTER"
><HR
ALIGN="LEFT"
WIDTH="100%"><TABLE
SUMMARY="Footer navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
><A
HREF="se77x9.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="ecos-ref.html"
ACCESSKEY="H"
>Home</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
><A
HREF="the-ecos-hardware-abstraction-layer.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
>SuperH/SH3(SH77X9) Hitachi Solution Engine 77X9</TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="installation-and-testing.html"
ACCESSKEY="U"
>Up</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
>The eCos Hardware Abstraction Layer (HAL)</TD
></TR
></TABLE
></DIV
></BODY
></HTML
>

Line No.	Rev	Author	Line
1	28	unneback	`<!-- Copyright (C) 2003 Red Hat, Inc. -->`
2			`<!-- This material may be distributed only subject to the terms -->`
3			`<!-- and conditions set forth in the Open Publication License, v1.0 -->`
4			`<!-- or later (the latest version is presently available at -->`
5			`<!-- http://www.opencontent.org/openpub/). -->`
6			`<!-- Distribution of the work or derivative of the work in any -->`
7			`<!-- standard (paper) book form is prohibited unless prior -->`
8			`<!-- permission is obtained from the copyright holder. -->`
9			`<HTML`
10			`><HEAD`
11			`><TITLE`
12			`>SuperH/SH4(SH7751) Hitachi Solution Engine 7751</TITLE`
13			`><meta name="MSSmartTagsPreventParsing" content="TRUE">`
14			`<META`
15			`NAME="GENERATOR"`
16			`CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+`
17			`"><LINK`
18			`REL="HOME"`
19			`TITLE="eCos Reference Manual"`
20			`HREF="ecos-ref.html"><LINK`
21			`REL="UP"`
22			`TITLE="Installation and Testing"`
23			`HREF="installation-and-testing.html"><LINK`
24			`REL="PREVIOUS"`
25			`TITLE="SuperH/SH3(SH77X9) Hitachi Solution Engine 77X9"`
26			`HREF="se77x9.html"><LINK`
27			`REL="NEXT"`
28			`TITLE="The eCos Hardware Abstraction Layer (HAL)"`
29			`HREF="the-ecos-hardware-abstraction-layer.html"></HEAD`
30			`><BODY`
31			`CLASS="SECT1"`
32			`BGCOLOR="#FFFFFF"`
33			`TEXT="#000000"`
34			`LINK="#0000FF"`
35			`VLINK="#840084"`
36			`ALINK="#0000FF"`
37			`><DIV`
38			`CLASS="NAVHEADER"`
39			`><TABLE`
40			`SUMMARY="Header navigation table"`
41			`WIDTH="100%"`
42			`BORDER="0"`
43			`CELLPADDING="0"`
44			`CELLSPACING="0"`
45			`><TR`
46			`><TH`
47			`COLSPAN="3"`
48			`ALIGN="center"`
49			`>eCos Reference Manual</TH`
50			`></TR`
51			`><TR`
52			`><TD`
53			`WIDTH="10%"`
54			`ALIGN="left"`
55			`VALIGN="bottom"`
56			`><A`
57			`HREF="se77x9.html"`
58			`ACCESSKEY="P"`
59			`>Prev</A`
60			`></TD`
61			`><TD`
62			`WIDTH="80%"`
63			`ALIGN="center"`
64			`VALIGN="bottom"`
65			`>Chapter 5. Installation and Testing</TD`
66			`><TD`
67			`WIDTH="10%"`
68			`ALIGN="right"`
69			`VALIGN="bottom"`
70			`><A`
71			`HREF="the-ecos-hardware-abstraction-layer.html"`
72			`ACCESSKEY="N"`
73			`>Next</A`
74			`></TD`
75			`></TR`
76			`></TABLE`
77			`><HR`
78			`ALIGN="LEFT"`
79			`WIDTH="100%"></DIV`
80			`><DIV`
81			`CLASS="SECT1"`
82			`><H1`
83			`CLASS="SECT1"`
84			`><A`
85			`NAME="SE7751">SuperH/SH4(SH7751) Hitachi Solution Engine 7751</H1`
86			`><DIV`
87			`CLASS="SECT2"`
88			`><H2`
89			`CLASS="SECT2"`
90			`><A`
91			`NAME="AEN7589">Overview</H2`
92			`><P`
93			`>RedBoot uses`
94			`the COM1 serial port. The default serial port settings are 38400,8,N,1.`
95			`Ethernet is also supported using the 10-base T connector. Management`
96			`of onboard flash is also supported.</P`
97			`><P`
98			`>The following RedBoot configurations are supported:`
99
100			`<DIV`
101			`CLASS="INFORMALTABLE"`
102			`><A`
103			`NAME="AEN7599"><P`
104			`></P`
105			`><TABLE`
106			`BORDER="1"`
107			`CLASS="CALSTABLE"`
108			`><THEAD`
109			`><TR`
110			`><TH`
111			`ALIGN="LEFT"`
112			`VALIGN="TOP"`
113			`>Configuration</TH`
114			`><TH`
115			`ALIGN="LEFT"`
116			`VALIGN="TOP"`
117			`>Mode</TH`
118			`><TH`
119			`ALIGN="LEFT"`
120			`VALIGN="TOP"`
121			`>Description</TH`
122			`><TH`
123			`ALIGN="LEFT"`
124			`VALIGN="TOP"`
125			`>File</TH`
126			`></TR`
127			`></THEAD`
128			`><TBODY`
129			`><TR`
130			`><TD`
131			`ALIGN="LEFT"`
132			`VALIGN="TOP"`
133			`>ROM</TD`
134			`><TD`
135			`ALIGN="LEFT"`
136			`VALIGN="TOP"`
137			`>[ROM]</TD`
138			`><TD`
139			`ALIGN="LEFT"`
140			`VALIGN="TOP"`
141			`>RedBoot running from the board's flash boot`
142			`sector.</TD`
143			`><TD`
144			`ALIGN="LEFT"`
145			`VALIGN="TOP"`
146			`>redboot_ROM.ecm</TD`
147			`></TR`
148			`><TR`
149			`><TD`
150			`ALIGN="LEFT"`
151			`VALIGN="TOP"`
152			`>RAM</TD`
153			`><TD`
154			`ALIGN="LEFT"`
155			`VALIGN="TOP"`
156			`>[RAM]</TD`
157			`><TD`
158			`ALIGN="LEFT"`
159			`VALIGN="TOP"`
160			`>RedBoot running from RAM with RedBoot in the`
161			`flash boot sector.</TD`
162			`><TD`
163			`ALIGN="LEFT"`
164			`VALIGN="TOP"`
165			`>redboot_RAM.ecm</TD`
166			`></TR`
167			`></TBODY`
168			`></TABLE`
169			`><P`
170			`></P`
171			`></DIV`
172			`></P`
173			`></DIV`
174			`><DIV`
175			`CLASS="SECT2"`
176			`><H2`
177			`CLASS="SECT2"`
178			`><A`
179			`NAME="AEN7618">Initial Installation Method</H2`
180			`><P`
181			`>The Solution Engine ships with the Hitachi boot monitor in EPROM`
182			`which allows for initial programming of RedBoot:</P`
183			`><P`
184			`></P`
185			`><OL`
186			`TYPE="1"`
187			`><LI`
188			`><P`
189			`>Set switches SW5-3 and SW5-4 to ON [boot from EPROM]</P`
190			`></LI`
191			`><LI`
192			`><P`
193			`>Connect a serial cable to COM1 and power up the board.</P`
194			`></LI`
195			`><LI`
196			`><P`
197			`>After the boot monitor banner, invoke the flash`
198			`download/program command:<TABLE`
199			`BORDER="5"`
200			`BGCOLOR="#E0E0F0"`
201			`WIDTH="70%"`
202			`><TR`
203			`><TD`
204			`><PRE`
205			`CLASS="SCREEN"`
206			`>Ready ><TT`
207			`CLASS="USERINPUT"`
208			`><B`
209			`>fl</B`
210			`></TT`
211			`></PRE`
212			`></TD`
213			`></TR`
214			`></TABLE`
215			`></P`
216			`></LI`
217			`><LI`
218			`><P`
219			`>The monitor should now ask for input:`
220			`<TABLE`
221			`BORDER="5"`
222			`BGCOLOR="#E0E0F0"`
223			`WIDTH="70%"`
224			`><TR`
225			`><TD`
226			`><PRE`
227			`CLASS="SCREEN"`
228			`>Flash ROM data copy to RAM`
229			`Please Send A S-format Record</PRE`
230			`></TD`
231			`></TR`
232			`></TABLE`
233			`>At this point copy the`
234			`RedBoot ROM SREC file to the serial port:<TABLE`
235			`BORDER="5"`
236			`BGCOLOR="#E0E0F0"`
237			`WIDTH="70%"`
238			`><TR`
239			`><TD`
240			`><PRE`
241			`CLASS="SCREEN"`
242			`>$ <TT`
243			`CLASS="USERINPUT"`
244			`><B`
245			`>cat redboot_ROM.eprom.srec > /dev/ttyS0</B`
246			`></TT`
247			`></PRE`
248			`></TD`
249			`></TR`
250			`></TABLE`
251			`>`
252			`Eventually you`
253			`should see something like<TABLE`
254			`BORDER="5"`
255			`BGCOLOR="#E0E0F0"`
256			`WIDTH="70%"`
257			`><TR`
258			`><TD`
259			`><PRE`
260			`CLASS="SCREEN"`
261			`>Start Addrs = A1000000`
262			`End Addrs = A1xxxxxx`
263			`Transfer complete</PRE`
264			`></TD`
265			`></TR`
266			`></TABLE`
267			`> from the monitor.</P`
268			`></LI`
269			`><LI`
270			`><P`
271			`>Set switch SW5-3 to OFF [boot from flash] and reboot the board. You`
272			`should now see the RedBoot banner.</P`
273			`></LI`
274			`></OL`
275			`></DIV`
276			`><DIV`
277			`CLASS="SECT2"`
278			`><H2`
279			`CLASS="SECT2"`
280			`><A`
281			`NAME="AEN7638">Special RedBoot Commands</H2`
282			`><P`
283			`>The <B`
284			`CLASS="COMMAND"`
285			`>exec</B`
286			`> command which allows the loading`
287			`and execution of Linux kernels`
288			`is supported for this board (see <A`
289			`HREF="executing-programs.html"`
290			`>the Section called <I`
291			`>Executing Programs from RedBoot</I`
292			`> in Chapter 2</A`
293			`>). The <B`
294			`CLASS="COMMAND"`
295			`>exec</B`
296			`> parameters used for the SE7751 are:</P`
297			`><P`
298			`></P`
299			`><DIV`
300			`CLASS="VARIABLELIST"`
301			`><DL`
302			`><DT`
303			`>-b <TT`
304			`CLASS="REPLACEABLE"`
305			`><I`
306			`><addr></I`
307			`></TT`
308			`></DT`
309			`><DD`
310			`><P`
311			`>Parameter block address. This is normally the first`
312			`page of the kernel image and defaults to 0x8c101000</P`
313			`></DD`
314			`><DT`
315			`>-i <TT`
316			`CLASS="REPLACEABLE"`
317			`><I`
318			`><addr></I`
319			`></TT`
320			`></DT`
321			`><DD`
322			`><P`
323			`>Start address of initrd`
324			`image</P`
325			`></DD`
326			`><DT`
327			`>-j <TT`
328			`CLASS="REPLACEABLE"`
329			`><I`
330			`><size></I`
331			`></TT`
332			`></DT`
333			`><DD`
334			`><P`
335			`>Size of initrd image</P`
336			`></DD`
337			`><DT`
338			`>-c <TT`
339			`CLASS="REPLACEABLE"`
340			`><I`
341			`>"args"</I`
342			`></TT`
343			`></DT`
344			`><DD`
345			`><P`
346			`>Kernel arguments string</P`
347			`></DD`
348			`><DT`
349			`>-m <TT`
350			`CLASS="REPLACEABLE"`
351			`><I`
352			`><flags></I`
353			`></TT`
354			`></DT`
355			`><DD`
356			`><P`
357			`>Mount rdonly flags. If set to a non-zero value the`
358			`root partition will be mounted read-only.</P`
359			`></DD`
360			`><DT`
361			`>-f <TT`
362			`CLASS="REPLACEABLE"`
363			`><I`
364			`><flags></I`
365			`></TT`
366			`></DT`
367			`><DD`
368			`><P`
369			`>RAM disk flags. Should normally be 0x4000</P`
370			`></DD`
371			`><DT`
372			`>-r <TT`
373			`CLASS="REPLACEABLE"`
374			`><I`
375			`><device number></I`
376			`></TT`
377			`></DT`
378			`><DD`
379			`><P`
380			`>Root device specification. /dev/ram is 0x0101</P`
381			`></DD`
382			`><DT`
383			`>-l <TT`
384			`CLASS="REPLACEABLE"`
385			`><I`
386			`><type></I`
387			`></TT`
388			`></DT`
389			`><DD`
390			`><P`
391			`>Loader type</P`
392			`></DD`
393			`></DL`
394			`></DIV`
395			`><P`
396			`>Finally the kernel entry address can be specified as an optional`
397			`argument. The default is 0x8c102000</P`
398			`><P`
399			`>On the SE7751, Linux expects to be loaded at address 0x8c101000 with`
400			`the entry point at 0x8c102000. This is configurable in the kernel`
401			`using the CONFIG_MEMORY_START option.</P`
402			`></DIV`
403			`><DIV`
404			`CLASS="SECT2"`
405			`><H2`
406			`CLASS="SECT2"`
407			`><A`
408			`NAME="AEN7687">Memory Maps</H2`
409			`><P`
410			`>RedBoot sets up the following memory map on the SE7751 board.<TABLE`
411			`BORDER="5"`
412			`BGCOLOR="#E0E0F0"`
413			`WIDTH="70%"`
414			`><TR`
415			`><TD`
416			`><PRE`
417			`CLASS="PROGRAMLISTING"`
418			`>Physical Address Range Description`
419			`----------------------- -----------`
420			`0x80000000 - 0x803fffff Flash (MBM29LV160)`
421			`0x81000000 - 0x813fffff EPROM (M27C800)`
422			`0x8c000000 - 0x8fffffff SDRAM`
423			`0xb8000000 - 0xb8ffffff PCMCIA (MaruBun)`
424			`0xb9000000 - 0xb9ffffff Switches`
425			`0xba000000 - 0xbaffffff LEDs`
426			`0xbd000000 - 0xbdffffff PCI MEM space`
427			`0xbe200000 - 0xbe23ffff PCI Ctrl space`
428			`0xbe240000 - 0xbe27ffff PCI IO space</PRE`
429			`></TD`
430			`></TR`
431			`></TABLE`
432			`></P`
433			`></DIV`
434			`><DIV`
435			`CLASS="SECT2"`
436			`><H2`
437			`CLASS="SECT2"`
438			`><A`
439			`NAME="AEN7691">Ethernet Driver</H2`
440			`><P`
441			`>The ethernet driver uses a hardwired ESA which can, at present,`
442			`only be changed in CDL.</P`
443			`></DIV`
444			`><DIV`
445			`CLASS="SECT2"`
446			`><H2`
447			`CLASS="SECT2"`
448			`><A`
449			`NAME="AEN7694">Rebuilding RedBoot</H2`
450			`><P`
451			`>These shell variables provide the platform-specific information`
452			`needed for building RedBoot according to the procedure described in`
453			`<A`
454			`HREF="rebuilding-redboot.html"`
455			`>Chapter 3</A`
456			`>:`
457			`<TABLE`
458			`BORDER="5"`
459			`BGCOLOR="#E0E0F0"`
460			`WIDTH="70%"`
461			`><TR`
462			`><TD`
463			`><PRE`
464			`CLASS="PROGRAMLISTING"`
465			`>export TARGET=se7751`
466			`export ARCH_DIR=sh`
467			`export PLATFORM_DIR=se7751</PRE`
468			`></TD`
469			`></TR`
470			`></TABLE`
471			`></P`
472			`><P`
473			`>The names of configuration files are listed above with the`
474			`description of the associated modes.</P`
475			`></DIV`
476			`></DIV`
477			`><DIV`
478			`CLASS="NAVFOOTER"`
479			`><HR`
480			`ALIGN="LEFT"`
481			`WIDTH="100%"><TABLE`
482			`SUMMARY="Footer navigation table"`
483			`WIDTH="100%"`
484			`BORDER="0"`
485			`CELLPADDING="0"`
486			`CELLSPACING="0"`
487			`><TR`
488			`><TD`
489			`WIDTH="33%"`
490			`ALIGN="left"`
491			`VALIGN="top"`
492			`><A`
493			`HREF="se77x9.html"`
494			`ACCESSKEY="P"`
495			`>Prev</A`
496			`></TD`
497			`><TD`
498			`WIDTH="34%"`
499			`ALIGN="center"`
500			`VALIGN="top"`

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [doc/] [html/] [ref/] [se7751.html] - Blame information for rev 588