Subversion Repositories openrisc

Programming with eCos is somewhat different from programming

      in more traditional environments. eCos is a configurable open

      source system, and you are able to configure and build a system

      specifically to meet the needs of your application. 

Various different directory hierarchies are involved in

      configuring and building the system: the component

        repository, the build tree,

      and the install tree. These directories

      exist in addition to the ones used to develop

      applications.

This chapter serves as a brief introduction to the

        concepts involved in eCos (Embedded Configurable Operating

        System).  It describes the configuration architecture and the

        underlying technology to a level required for the embedded

        systems developer to configure eCos.  It does not describe in

        detail aspects such as how to write reusable components for

        eCos: this information is given in the Component

          Writer’s Guide.

Software solutions for the embedded space place

          particularly stringent demands on the developer, typically

          represented as requirements for small memory footprint, high

          performance and robustness.  These demands are addressed in

          eCos by providing the ability to perform compile-time

          specialization: the developer can tailor the operating

          system to suit the needs of the application.  In order to

          make this process manageable, eCos is built in the context

          of a Configuration Infrastructure: a set of tools including

          a Configuration Tool and a formal

          description of the process of configuration by means of a

          Component Definition Language.

eCos is tailored at source level (that is, before

            compilation or assembly) in order to create an eCos

            configuration. In concrete terms, an

            eCos configuration takes the form of a configuration save

            file (with extension .ecc) and set of files used to build

            user applications (including, when built, a library file

            against which the application is linked). 

eCos is shipped in source in the form of a

          component repository - a directory

          hierarchy that contains the sources and other files which

          are used to build a configuration. The component repository

          can be added to by, for example, downloading from the

          net.

Part of the component repository is a set of files

          containing a definition of its structure.  The form used for

          this purpose is the Component Definition

            Language (CDL).  CDL defines the relationships

          between components and other information used by tools such

          as the eCosConfiguration Tool.

          CDL is generally formulated by the writers of components: it

          is not necessary to write or understand CDL in order for the

          embedded systems developer to construct an eCos

          configuration. 

The building blocks of an eCos configuration are called

          packages. Packages are the units of

          software distribution.  A set of core packages (such as

          kernel, C library and math library) is provided by Red Hat:

          additional third-party packages will be available in

          future.

A package may exist in one of a number of versions.

 The default version is the current version.

 Only one version of a given package may be present in the component

repository at any given time.

Packages are organized in a tree hierarchy.  Each package

is either at the top-level or is the child of another package.

The eCos  Package Administration Tool can be used to add or remove

packages from the component repository.  The eCos Configuration Tool can be used to include or exclude packages from the configuration

being built.

Configuration items are the

          individual entities that form a configuration.  Each item

          corresponds to the setting of a C pre-processor macro (for

          example,

          CYGHWR_HAL_ARM_PID_GDB_BAUD).

          The code of eCos itself is written to test such pre-processor

          macros so as to tailor the code.  User code can do

          likewise.

Configuration items come in the following flavors:

None: such entities serve only as

place holders in the hierarchy, allowing other entities to be grouped

more easily.

Boolean entities are the most common

flavor; they correspond to units of functionality that can be either

enabled or disabled.  If the entity is enabled then there will be

a #define; code will check the setting using, for example, #ifdef

Data entities encapsulate some arbitrary

data. Other properties such as a set or range of legal values can

be used to constrain the actual values, for example to an integer

or floating point value within a certain range.

Booldata entities combine the attributes

of Boolean and Data: they

can be enabled or disabled and, if enabled, will hold a data value.

Like packages, configuration items exist in a tree-based hierarchy:

each configuration item has a parent which may be another configuration

item or a package.  Under some conditions (such as when packages

are added or removed from a configuration), items may be “re-parented” such

that their position in the tree changes. 

Expressions are relationships between CDL items.  There are

three types of expression in CDL:

        

      
      

         
169
         

         

         
          
      
      

         
170
         

         

         
        
      
      

         
171
         

         

         
          

      
      

         
172
         

         

         
          
      
      

         
173
         

         

         
              Expression Type
      
      

         
174
         

         

         
              Result
      
      

         
175
         

         

         
              Common Use (see )
      
      

         
176
         

         

         
          
      
      

         
177
         

         

         
          

      
      

         
178
         

         

         
            
      
      

         
179
         

         

         
              Ordinary
      
      

         
180
         

         

         
              A single value
      
      

         
181
         

         

         
              legal_values property
      
      

         
182
         

         

         
            
      
      

         
183
         

         

         
            
      
      

         
184
         

         

         
              ListA range of
      
      

         
185
         

         

         
                values (for example “1 to 10”)
      
      

         
186
         

         

         
              legal_values property 
      
      

         
187
         

         

         
            
      
      

         
188
         

         

         
              GoalTrue or False
      
      

         
189
         

         

         
              requires and active_if properties
      
      

         
190
         

         

         
            
      
      

         
191
         

         

         
          
      
      

         
192
         

         

         
        

Each configuration item has a set of properties.  The following

table describes the most commonly used:

        
      
      

      
      

         
199
         

         

         
          
      
      

         
200
         

         

         
          
      
      

         
201
         

         

         
            

         
202
         

         

         
                Property
      
      

         
203
         

         

         
Use 
      
      

         
204
         

         

         
            
      
      

         
205
         

         

         
            

      
      

         
206
         

         

         
              
      
      

         
207
         

         

         
                Flavor
      
      

         
208
         

         

         
                The “type” of the item, as
      
      

         
209
         

         

         
                  described above 
      
      

         
210
         

         

         
              
      
      

         
211
         

         

         
                EnabledWhether
      
      

         
212
         

         

         
                  the item is enabled 
      
      

         
213
         

         

         
              
      
      

         
214
         

         

         
                Current_value
      
      

         
215
         

         

         
The current value of the item 
      
      

         
216
         

         

         
              
      
      

         
217
         

         

         
                Default_value
      
      

         
218
         

         

         
An ordinary expression defining the default value of the
      
      

         
219
         

         

         
                    item
      
      

         
220
         

         

         
              
      
      

         
221
         

         

         
                Legal_valuesA
      
      

         
222
         

         

         
                  list expression defining the values the item may hold (for example,
      
      

         
223
         

         

         
                  1 to10) 
      
      

         
224
         

         

         
              
      
      

         
225
         

         

         
                Active_ifA
      
      

         
226
         

         

         
                  goal expression denoting the requirement for this item to be active
      
      

         
227
         

         

         
(see below: Inactive Items) 
      
      

         
228
         

         

         

      
      

         
229
         

         

         
RequiresA goal
      
      

         
230
         

         

         
expression denoting requirements this item places on others (see
      
      

         
231
         

         

         
below: Conflicts) 
      
      

         
232
         

         

         

      
      

         
233
         

         

         
CalculatedWhether
      
      

         
234
         

         

         
the item as non-modifiable 
      
      

         
235
         

         

         

      
      

         
236
         

         

         
MacroThe corresponding
      
      

         
237
         

         

         
C pre-processor macro 
      
      

         
238
         

         

         

      
      

         
239
         

         

         
FileThe C header
      
      

         
240
         

         

         
file in which the macro is defined 
      
      

         
241
         

         

         

      
      

         
242
         

         

         
URLThe URL of
      
      

         
243
         

         

         
a documentation page describing the item 
      
      

         
244
         

         

         

      
      

         
245
         

         

         
HardwareIndicates
      
      

         
246
         

         

         
that a particular package is related to specific hardware
      
      

         
247
         

         

         
            
      
      

         
248
         

         

         
          
      
      

         
249
         

         

         
        

A complete description of properties is contained in the Component

Writer’s Guide.

Descendants of an item that is disabled are inactive: their

values may not be changed.  Items may also become inactive if

an active_if expression is used to make the item dependent

on an expression involving other items. 

Not all settings of configuration items will lead to a

          coherent configuration; for example, the use of a timeout

          facility might require the existence of timer support, so if

          the one is required the other cannot be removed.  Coherence

          is policed by means of consistency rules (in particular, the

          goal expressions that appear as CDL items

          requires and

          active_if attributes [see

          above]).  A violation of consistency rules creates a

          conflict, which must be resolved in

          order to ensure a consistent configuration. Conflict

          resolution can be performed manually or with the assistance

          of the eCos tools.  Conflicts come in the following

          flavors:

An unresolved conflict means that

there is a reference to an entity that is not yet in the current

configuration 

An illegal value conflict is caused

when a configuration item is set to a value that is not permitted

(that is, a legal_values goal expression

is failing) 

An evaluation exception conflict

is caused when the evaluation of an expression would fail (for example,

because of a division by zero) 

An unsatisfied goal conflict is caused

by a failing requires goal expression 

A bad data conflict arises only rarely,

and corresponds to badly constructed CDL.  Such a conflict can only

be resolved by reference to the CDL writer.

A template is a saved configuration

          - that is, a set of packages and configuration item

          settings.  Templates are provided with eCos to allow you to

          get started quickly by instantiating (copying) a saved

          configuration corresponding to one of a number of common

          scenarios; for example, a basic eCos configuration template

          is supplied that contains the infrastructure, kernel, C and

          math libraries, plus their support packages.

Each of the file trees involved in eCos development has a

        different role. 

The eCos component repository

          contains directories for all the packages that are shipped

          with eCos or provided by third parties.

The component repository should not be modified as part of

application development. 

The component repository is the master copy of source code

for all system and third party components. It also contains some

files needed to administer and build the system, such as ecosadmin.tcl.

You modify it by importing new versions of packages from a

distribution or removing existing packages. These activities are

undertaken using the eCos Package Administration Tool.

Files in the component repository should only be edited manually

as determined by the component maintainer.

User application source code should not go

into the component repository.

BASE_DIR/doc/ref/ecos-ref.html

The top level HTML file for the

                  eCos Reference

                    Manual. 

BASE_DIR/prebuilt/pid/tests/kernel/&Version;/tests/thread_gdb.exe

BASE_DIR/prebuilt/linux/tests/kernel/&Version;/tests/thread_gdb.exe

Pre-built tests for the supported platforms, and

                  the synthetic Linux target.

BASE_DIR/examples/twothreads.c

One of the example programs.

BASE_DIR/ecosadmin.tcl

The Tcl program which is used to  import new versions of packages

from a distribution or remove existing packages.

BASE_DIR/packages/language/c/libm/&Version;/src/double/portable-api/s_tanh.c

Implementation of the hyperbolic tangent function in the standard

math library.

BASE_DIR/pkgconf/rules.mak

A file with make rules, used

by the makefile.

The build tree is the directory

          hierarchy in which all generated files

          are placed. Generated files consist of the

          makefile, the compiled object files,

          and a dependency file (with a .d

          extension) for each source file.

The build tree is where all intermediate object files are

            placed. 

Recompiling can modify the object files.

User application source or binary code should

            not go in the build tree. 

ecos-work/language/c/libc/&Version;/src

The directory in which object files for

                  the C library are built.

The install tree is the location

          for all files needed for application development. The

          libtarget.a library, which contains the

            custom-built eCos kernel and other components, is placed

            in the install tree, along with all packages’ public

            header files. If you build the tests, the test executable

            programs will also be placed in the install

            tree. 

By default, the install tree is created by

          ecosconfig in a subdirectory of the build

          tree called install. This can be

          modified with the --prefix option (see

          ).

The install tree is where the custom-built

            libtarget.a library, which contains

            the eCos kernel and other components, is located. The

            install tree is also the location for all the header files

            that are part of a published interface for their

            component. 

Recompiling can replace

            libtarget.a and the test

            executables. 

Where a memory layout requires modification without

            use of the eCos Configuration Tool, the memory layout

            files must be edited directly in the install tree. These

            files are located at

            install/include/pkgconf/mlt_*.*.

            Note that subsequent modification of the install tree

            using the Configuration Tool will result in such manual

            edits being lost.

User application source or binary code should

            not go in the install tree. 

install/lib/libtarget.a

The library containing the kernel and other components.

install/include/cyg/kernel/kapi.h

The header file for the kernel C language API.

install/include/pkgconf/mlt_arm_pid_ram.ldi

The linker script fragment describing the memory

                  layout for linking applications intended for

                  execution on an ARM PID development board using RAM

                  startup.

install/include/stdio.h

The C library header file for standard I/O. 

This tree is not part of eCos itself: it is the

          directory in which eCos end users write their own

          applications.

Example applications and their

          Makefile are located in the component

          repository, in the directory

          BASE_DIR/examples.

There is no imposed format on this directory, but there

          are certain compiler and linker flags that must be used to

          compile an eCos application. The basic set of flags is shown

          in the example Makefile, and additional

          details can be found in . 

    eCos is built using

      the GNU C and C++ compilers. eCos relies on certain features of these

      tools such as constructor priority ordering and selective linking

      which are not part of other toolchains.

Some GCC options are required for eCos,

and others can be useful. This chapter gives a brief description

of the required options as well as some recommended eCos-specific options.

All other GCC options (described in the GCC manuals)

are available. 

The following command lines demonstrate the

          minimum set of options required to

          compile and link an eCos program written in C. 

Remember that when this manual shows

            TARGET-gcc

            you should use the full name of the cross compiler,

            e.g. i386-elf-gcc,

            arm-elf-gcc, or

            sh-elf-gcc. When compiling for the

            synthetic Linux target, use the native

            gcc which must have the features

            required by eCos.

$ TARGET-gcc -c  -IINSTALL_DIR/include file.c

$ TARGET-gcc -o program file.o -LINSTALL_DIR/lib -Ttarget.ld -nostdlib

Certain targets may require extra options, for example

            the SPARClite architectures require the option

            -mcpu=sparclite. Examine the

            BASE_DIR/examples/Makefile

            or the “Global compiler flags” option

            (CYGBLD_GLOBAL_CFLAGS) in your generated

            eCos configuration) to see if any extra options are

            required, and if so, what they are. 

The following command lines use some other options

            which are recommended because they use the

        selective linking feature:

$ TARGET-gcc -c  -IINSTALL_DIR/include -I. -ffunction-sections -fdata-sections -g -O2 file.c

$ TARGET-gcc -o program file.o -ffunction-sections -fdata-sections -Wl,--gc-sections -g -O2 \

          -LINSTALL_DIR/lib -Ttarget.ld -nostdlib

The following command lines demonstrate the

          minimum set of options required to

          compile and link an eCos program written in C++.

Remember that when this manual shows

            TARGET-g++

            you should use the full name of the cross compiler,

            e.g. i386-elf-g++,

            arm-elf-g++, or

            sh-elf-g++. When compiling for the

            synthetic Linux target, use the native

            g++ which must have the features

            required by eCos.

$ TARGET-g++ -c  -IINSTALL_DIR/include -fno-rtti -fno-exceptions file.cxx

$ TARGET-g++ -o program file.o -LINSTALL_DIR/lib -Ttarget.ld -nostdlib

Certain targets may require extra options,

            for example the SPARClite architectures require the option

            -mcpu=sparclite. Examine the

            BASE_DIR/packages/targets

            file or BASE_DIR/examples/Makefile

            or the “Global compiler flags” option

            (CYGBLD_GLOBAL_CFLAGS) in your generated

            eCos configuration) to see if any extra options are

            required, and if so, what they are.

The following command lines use some other options

            which are recommended because they use the

            selective linking feature:

$ TARGET-g++ -c -IINSTALL_DIR/include -I. -ffunction-sections -fdata-sections -fno-rtti \

          -fno-exceptions -finit-priority -g -O2 file.cxx

$ TARGET-g++ -o program file.o -W1,--gc-sections -g -O2 -LINSTALL_DIR/lib -Ttarget.ld  -nostdlib

eCos applications and components can be debugged in

        traditional ways, with printing statements and debugger

        single-stepping, but there are situations in which these

        techniques cannot be used. One example of this is when a

        program is getting data at a high rate from a real-time

        source, and cannot be slowed down or interrupted.

eCos’s infrastructure module provides a

        tracing formalism, allowing the

        kernel’s tracing macros to be configured in many useful

        ways. eCos’s kernel provides instrumentation

          buffers which also collect specific

        (configurable) data about the system’s history and

        performance.

To use eCos’s tracing facilities you must first

          configure your system to use tracing.

          You should enable the Asserts and Tracing component

          (CYGPKG_INFRA_DEBUG) and the

          Use tracing component within it

          (CYGDBG_USE_TRACING). These

          options can be enabled with the Configuration

            Tool or by editing the file

          BUILD_DIR/pkgconf/infra.h

           manually.

You should then examine all the tracing-related options in

the Package: Infrastructure chapter of the eCos Reference

Manual. One useful set of configuration options are: CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS and CYGDBG_INFRA_DEBUG_TRACE_MESSAGE,

which are both enabled by default when tracing is enabled.

The following “Hello world with tracing” shows

the output from running the hello world program (from ) that was

built with tracing enabled: 

$ mips-tx39-elf-run --board=jmr3904  hello

Hello, eCos world!

ASSERT FAIL: <2>cyg_trac.h          [ 623] Cyg_TraceFunction_Report_::set_exitvoid()                                                            exitvoid used in typed function

TRACE: <1>mlqueue.cxx         [ 395] Cyg_ThreadQueue_Implementation::enqueue()                                                            {{enter

TRACE: <1>mlqueue.cxx         [ 395] Cyg_ThreadQueue_Implementation::enqueue()                                                            }}RETURNING UNSET!

TRACE: <1>mlqueue.cxx         [ 126] Cyg_Scheduler_Implementation::add_thread()                                                           }}RETURNING UNSET!

TRACE: <1>thread.cxx          [ 654] Cyg_Thread::resume()                                                                                 }}return void

TRACE: <1>cstartup.cxx        [ 160] cyg_iso_c_start()                                                                                    }}return void

TRACE: <1>startup.cxx         [ 142] cyg_package_start()                                                                                  }}return void

TRACE: <1>startup.cxx         [ 150] cyg_user_start()                                                                                     {{enter

TRACE: <1>startup.cxx         [ 150] cyg_user_start()                                                                                     (((void)))

TRACE: <1>startup.cxx         [ 153] cyg_user_start()                                                                                     'This is the system default cyg_user_start()'

TRACE: <1>startup.cxx         [ 157] cyg_user_start()                                                                                     }}return void

TRACE: <1>sched.cxx           [ 212] Cyg_Scheduler::start()                                                                               {{enter

TRACE: <1>mlqueue.cxx         [ 102] Cyg_Scheduler_Implementation::schedule()                                                             {{enter

TRACE: <1>mlqueue.cxx         [ 437] Cyg_ThreadQueue_Implementation::highpri()                                                            {{enter

TRACE: <1>mlqueue.cxx         [ 437] Cyg_ThreadQueue_Implementation::highpri()                                                            }}RETURNING UNSET!

TRACE: <1>mlqueue.cxx         [ 102] Cyg_Scheduler_Implementation::schedule()                                                             }}RETURNING UNSET!

TRACE: <2>intr.cxx            [ 450] Cyg_Interrupt::enable_interrupts()                                                                   {{enter

TRACE: <2>intr.cxx            [ 450] Cyg_Interrupt::enable_interrupts()                                                                   }}RETURNING UNSET!

TRACE: <2>thread.cxx          [  69] Cyg_HardwareThread::thread_entry()                                                                   {{enter

TRACE: <2>cstartup.cxx        [ 127] invoke_main()                                                                                        {{enter

TRACE: <2>cstartup.cxx        [ 127] invoke_main()                                                                                        ((argument is ignored))

TRACE: <2>dummyxxmain.cxx     [  60] __main()                                                                                             {{enter

TRACE: <2>dummyxxmain.cxx     [  60] __main()                                                                                             (((void)))

TRACE: <2>dummyxxmain.cxx     [  63] __main()                                                                                             'This is the system default __main()'

TRACE: <2>dummyxxmain.cxx     [  67] __main()                                                                                             }}return void

TRACE: <2>memcpy.c            [ 112] _memcpy()                                                                                            {{enter

TRACE: <2>memcpy.c            [ 112] _memcpy()                                                                                            ((dst=80002804, src=BFC14E58, n=19))

TRACE: <2>memcpy.c            [ 164] _memcpy()                                                                                            }}returning 80002804

TRACE: <2>cstartup.cxx        [ 137] invoke_main()                                                                                        'main() has returned with code 0. Calling exit()'

TRACE: <2>exit.cxx            [  71] __libc_exit()                                                                                        {{enter

TRACE: <2>exit.cxx            [  71] __libc_exit()                                                                                        ((status=0 ))

TRACE: <2>atexit.cxx          [  84] cyg_libc_invoke_atexit_handlers()                                                                    {{enter

TRACE: <2>atexit.cxx          [  84] cyg_libc_invoke_atexit_handlers()                                                                      (((void)))

Scheduler:

Lock:                0

Current Thread:      <null>

Threads:

Idle Thread          pri =  31 state = R      id =   1

                     stack base = 800021F0 ptr = 80002510 size = 00000400

                     sleep reason NONE     wake reason NONE

                     queue = 80000C54      wait info = 00000000

<null>               pri =   0 state = R      id =   2

                     stack base = 80002A48 ptr = 8000A968 size = 00008000

                     sleep reason NONE     wake reason NONE

                     queue = 80000BD8      wait info = 00000000

Instrument buffers can be used to

          find out how many events of a given type happened in the

          kernel during execution of a program.

You can monitor a class of several types of events, or

          you can just look at individual events. 

Examples of events that can be

          monitored are:

scheduler events 

thread operations

interrupts 

mutex operations 

binary semaphore operations 

counting semaphore operations 

clock ticks and interrupts 

Examples of fine-grained scheduler event types are: 

scheduler lock

scheduler unlock

rescheduling

time slicing 

Information about the events is stored in an

          event record. The structure that

          defines this record has type struct

          Instrument_Record:

The list of records is stored in an array called instrument_buffer

which you can let the kernel provide or you can provide yourself

by setting the configuration option CYGVAR_KERNEL_INSTRUMENT_EXTERNAL_BUFFER. 

To write a program that examines the instrumentation

          buffers: 

Enable instrumentation buffers in the eCos kernel configuration.

The component macro is CYGPKG_KERNEL_INSTRUMENT.

To allocate the buffers yourself, enable the configuration

option CYGVAR_KERNEL_INSTRUMENT_EXTERNAL_BUFFER. 

Include the header file

cyg/kernel/instrmnt.h

.

#include <cyg/kernel/instrmnt.h>

The Instrumentation_Record structure

is not published in the kernel header file. In the future there

will be a cleaner mechanism to access it, but for now you should

paste into your code in the following lines:

struct Instrument_Record

{

 CYG_WORD16 type; // record type

 CYG_WORD16 thread; // current thread id

 CYG_WORD timestamp; // 32 bit timestamp

 CYG_WORD arg1; // first arg

 CYG_WORD arg2; // second arg

};

Enable the events you want to record using

cyg_instrument_enable()

, and disable them later. Look at

cyg/kernel/instrmnt.h

 and the examples below to see what events can be enabled. 

Place the code you want to debug between the matching

functions

cyg_instrument_enable()

 and

cyg_instrument_disable()

. 

Examine the buffer. For now you need to look at the data

in there (the example program below shows how to do that), and future

versions of eCos will include a host-side tool to help you understand

the data. 

This program is also provided in the

            examples directory.

/* this is a program which uses eCos instrumentation buffers; it needs

 to be linked with a kernel which was compiled with support for

 instrumentation */

#include <stdio.h>

#include <pkgconf/kernel.h>

#include <cyg/kernel/instrmnt.h>

#include <cyg/kernel/kapi.h>

#ifndef CYGVAR_KERNEL_INSTRUMENT_EXTERNAL_BUFFER

# error You must configure eCos with CYGVAR_KERNEL_INSTRUMENT_EXTERNAL_BUFFER

#endif

struct Instrument_Record

{