Subversion Repositories openrisc

//==========================================================================

//

//      mn10300-mon.c

//

//      Support code to extend the generic monitor code to support

//      MN10300 processors.

//

//==========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//==========================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):    dmoseley

// Contributors: dmoseley

// Date:         2000-08-11

// Purpose:      Support code to extend the generic monitor code to support

//               MN10300 processors.

// Description:  Further board specific support is in other files.

//               This file contains:

//                 register names lookup table

//

//               Empty Stubs:

//                 Interval timer - This should really belong to the application

//                 operating system.

//

//               Should not contain:

//                 low level uart getchar and putchar functions

//                 delay function to support uart

//

//####DESCRIPTIONEND####

//

//=========================================================================

#include "monitor.h"

struct regstruct regtab[] =

{

    {"d0",       D0,          1},

    {"d1",       D1,          1},

    {"d2",       D2,          1},

    {"d3",       D3,          1},

    {"a0",       A0,          1},

    {"a1",       A1,          1},

    {"a2",       A2,          1},

    {"a3",       A3,          1},

    {"sp",       SP,          1},

    {"pc",       PC,          1},

    {"mdr",      MDR,         1},

    {"psw",      PSW,         1},

    {"lir",      LIR,         1},

    {"lar",      LAR,         1},

#ifdef CYGPKG_HAL_MN10300_AM33

    {"r0",       R0,          1},

    {"r1",       R1,          1},

    {"r2",       R2,          1},

    {"r3",       R3,          1},

    {"r4",       R4,          1},

    {"r5",       R5,          1},

    {"r6",       R6,          1},

    {"r7",       R7,          1},

    {"ssp",      SSP,         1},

    {"msp",      MSP,         1},

    {"usp",      USP,         1},

    {"mcrh",     MCRH,        1},

    {"mcrl",     MCRL,        1},

    {"mcvf",     MCVF,        1},

    {"mdrq",     MDRQ,        1},

#if CYGHWR_HAL_MN10300_AM33_REVISION == 2

    {"fpcr",     FPCR,        1},

    {"fs0",      FS0,         1},

    {"fs1",      FS1,         1},

    {"fs2",      FS2,         1},

    {"fs3",      FS3,         1},

    {"fs4",      FS4,         1},

    {"fs5",      FS5,         1},

    {"fs6",      FS6,         1},

    {"fs7",      FS7,         1},

    {"fs8",      FS8,         1},

    {"fs9",      FS9,         1},

    {"fs10",     FS10,        1},

    {"fs11",     FS11,        1},

    {"fs12",     FS12,        1},

    {"fs13",     FS13,        1},

    {"fs14",     FS14,        1},

    {"fs15",     FS15,        1},

    {"fs16",     FS16,        1},

    {"fs17",     FS17,        1},

    {"fs18",     FS18,        1},

    {"fs19",     FS19,        1},

    {"fs20",     FS20,        1},

    {"fs21",     FS21,        1},

    {"fs22",     FS22,        1},

    {"fs23",     FS23,        1},

    {"fs24",     FS24,        1},

    {"fs25",     FS25,        1},

    {"fs26",     FS26,        1},

    {"fs27",     FS27,        1},

    {"fs28",     FS28,        1},

    {"fs29",     FS29,        1},

    {"fs30",     FS30,        1},

    {"fs31",     FS31,        1},

#endif

#endif  

    { 0,         0,           1}, /* Terminating element must be last */

} ;

void

initialize_mon(void)

{

} /* initialize_mon */

#if CYGHWR_HAL_MN10300_AM33_REVISION == 2

extern int fpu_regs_read;

#endif

#ifdef CYGPKG_HAL_MN10300_AM33

extern int msp_read;

#endif

void

initialize_mon_each_time(void)

{

  int i;

#if CYGHWR_HAL_MN10300_AM33_REVISION == 2

  // Make sure the regtab[] indicates the valid status of the FPU registers

  for (i = 0; regtab[i].registername != NULL; i++)

    {

      if ((regtab[i].registernumber >= FP_START) && (regtab[i].registernumber <= FP_END))

        regtab[i].registervalid = fpu_regs_read;

    }

#endif

#ifdef CYGPKG_HAL_MN10300_AM33

  // Make sure the regtab[] indicates the valid status of the MSP

  for (i = 0; regtab[i].registername != NULL; i++)

    {

      if (regtab[i].registernumber == MSP)

          regtab[i].registervalid = msp_read;

    }

#endif

} /* initialize_mon_each_time */

#include <cyg/hal/hal_arch.h>

#include <bsp/common/bsp_if.h>

int

machine_syscall(HAL_SavedRegisters *regs)

{

    int res, err;

    target_register_t d0, d1, d2, d3;

    d0 = get_register(D0);

    d1 = get_register(D1);

    d2 = get_register(D2);

    d3 = get_register(D3);

    err = _bsp_do_syscall(d0, // Function

                          d1, d2, d3, 0, // arguments,

                          &res);

    if (err)

    {

        // This was a syscall.  It has now been handled, so update the registers appropriately

        put_register(D0, res);

        bsp_skip_instruction(regs);

    }

    return err;

}

// Utility function for printing breakpoints

void bp_print(target_register_t bp_val)

{

    bsp_printf("0x%08lx\n", (unsigned long)bp_val);

}