Subversion Repositories openrisc

//==========================================================================

//

//      devs/eth/powerpc/csb281/include/devs_eth_csb281.inl

//

//      PCI i82559 ethernet I/O definitions.

//

//==========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

// Copyright (C) 2002, 2003 Gary Thomas

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//==========================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):   jskov

// Contributors:jskov, gthomas

// Date:        2001-01-25

// Purpose:     PCI/i82559 ethernet defintions

//####DESCRIPTIONEND####

//==========================================================================

#include            // CYGNUM_HAL_INTERRUPT_ETHR

#ifdef CYGPKG_DEVS_ETH_CSB281_ETH0

#define CYGHWR_INTEL_I82559_PCI_MEM_MAP_BASE CYGMEM_SECTION_pci_window

#define CYGHWR_INTEL_I82559_PCI_MEM_MAP_SIZE CYGMEM_SECTION_pci_window_SIZE

#define CYGHWR_DEVS_ETH_INTEL_I82559_HAS_NO_EEPROM

#define CYGHWR_DEVS_ETH_INTEL_I82559_USE_MEMORY

static I82559 i82559_eth0_priv_data = {

#ifdef CYGSEM_DEVS_ETH_CSB281_ETH0_SET_ESA

    hardwired_esa: 1,

    mac_address: CYGDAT_DEVS_ETH_CSB281_ETH0_ESA

#else

    hardwired_esa: 0,

#endif

};

ETH_DRV_SC(i82559_sc0,

           &i82559_eth0_priv_data,      // Driver specific data

           CYGDAT_DEVS_ETH_CSB281_ETH0_NAME, // Name for device

           i82559_start,

           i82559_stop,

           i82559_ioctl,

           i82559_can_send,

           i82559_send,

           i82559_recv,

           i82559_deliver,

           i82559_poll,

           i82559_int_vector

    );

NETDEVTAB_ENTRY(i82559_netdev0,

                "i82559_" CYGDAT_DEVS_ETH_CSB281_ETH0_NAME,

                i82559_init,

                &i82559_sc0);

#endif // CYGPKG_DEVS_ETH_CSB281_ETH0

// These arrays are used for sanity checking of pointers

I82559 *

i82559_priv_array[CYGNUM_DEVS_ETH_INTEL_I82559_DEV_COUNT] = {

#ifdef CYGPKG_DEVS_ETH_CSB281_ETH0

    &i82559_eth0_priv_data,

#endif

};

#ifdef CYGDBG_USE_ASSERTS

// These are only used when assertions are enabled

cyg_netdevtab_entry_t *

i82559_netdev_array[CYGNUM_DEVS_ETH_INTEL_I82559_DEV_COUNT] = {

#ifdef CYGPKG_DEVS_ETH_CSB281_ETH0

    &i82559_netdev0,

#endif

};

struct eth_drv_sc *

i82559_sc_array[CYGNUM_DEVS_ETH_INTEL_I82559_DEV_COUNT] = {

#ifdef CYGPKG_DEVS_ETH_CSB281_ETH0

    &i82559_sc0,

#endif

};

#endif // CYGDBG_USE_ASSERTS

// --------------------------------------------------------------

// RedBoot configuration options for managing ESAs for us

// tell the driver there is no EEPROM on this board

#define CYGHWR_DEVS_ETH_INTEL_I82559_HAS_NO_EEPROM

// Decide whether to have redboot config vars for it...

#ifdef CYGPKG_REDBOOT

#include 

#ifdef CYGSEM_REDBOOT_FLASH_CONFIG

#ifdef CYGPKG_REDBOOT_NETWORKING

#include 

#include 

#ifdef CYGVAR_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA_ETH0

RedBoot_config_option("Network hardware address [MAC] for eth0",

                      eth0_esa,

                      ALWAYS_ENABLED, true,

                      CONFIG_ESA, 0

    );

#endif

#endif

#endif

#endif

// and initialization code to read them

// - independent of whether we are building RedBoot right now:

#ifdef CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA

#include 

#ifndef CONFIG_ESA

#define CONFIG_ESA (6)

#endif

#define CYGHWR_DEVS_ETH_INTEL_I82559_GET_ESA( p_i82559, mac_address, ok )       \

CYG_MACRO_START                                                                 \

    ok = false;                                                                 \

        ok = CYGACC_CALL_IF_FLASH_CFG_OP( CYGNUM_CALL_IF_FLASH_CFG_GET,         \

                                          "eth0_esa", mac_address, CONFIG_ESA); \

CYG_MACRO_END

#endif // CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA

// EOF devs_eth_csb281.inl