Subversion Repositories openrisc

#ifndef CYGONCE_ARM_CMA230_SERIAL_H

#define CYGONCE_ARM_CMA230_SERIAL_H

// ====================================================================

//

//      cma230_serial.h

//

//      Device I/O - Description of Cogent CMA230 serial hardware

//

// ====================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

// ====================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):           gthomas

// Contributors:        gthomas

// Date:        1999-05-20

// Purpose:     Internal interfaces for serial I/O drivers

// Description:

//

//####DESCRIPTIONEND####

//

// ====================================================================

// Description of serial ports on Cogent CMA230

struct serial_port {

    unsigned char _byte[32];

};

#define reg(n) _byte[n*8]

// Receive control registers

#define rhr reg(0)    // Receive holding register

#define isr reg(2)    // Interrupt status register

#define lsr reg(5)    // Line status register

#define msr reg(6)    // Modem status register

#define scr reg(7)    // Scratch register

// Transmit control registers

#define thr reg(0)    // Transmit holding register

#define ier reg(1)    // Interrupt enable register

#define fcr reg(2)    // FIFO control register

#define lcr reg(3)    // Line control register

#define mcr reg(4)    // Modem control register

#define ldl reg(0)    // LSB of baud rate

#define mdl reg(1)    // MSB of baud rate

// Interrupt Enable Register

#define IER_RCV 0x01

#define IER_XMT 0x02

#define IER_LS  0x04

#define IER_MS  0x08

// Line Control Register

#define LCR_WL5 0x00    // Word length

#define LCR_WL6 0x01

#define LCR_WL7 0x02

#define LCR_WL8 0x03

#define LCR_SB1 0x00    // Number of stop bits

#define LCR_SB1_5 0x04  // 1.5 -> only valid with 5 bit words

#define LCR_SB2 0x04

#define LCR_PN  0x00    // Parity mode - none

#define LCR_PE  0x0C    // Parity mode - even

#define LCR_PO  0x08    // Parity mode - odd

#define LCR_PM  0x28    // Forced "mark" parity

#define LCR_PS  0x38    // Forced "space" parity

#define LCR_DL  0x80    // Enable baud rate latch

// Line Status Register

#define LSR_RSR 0x01

#define LSR_THE 0x20

// Modem Control Register

#define MCR_DTR 0x01

#define MCR_RTS 0x02

#define MCR_INT 0x08   // Enable interrupts

// Interrupt status register

#define ISR_Tx  0x02

#define ISR_Rx  0x04

static unsigned char select_word_length[] = {

    LCR_WL5,    // 5 bits / word (char)

    LCR_WL6,

    LCR_WL7,

    LCR_WL8

};

static unsigned char select_stop_bits[] = {

    0,

    LCR_SB1,    // 1 stop bit

    LCR_SB1_5,  // 1.5 stop bit

    LCR_SB2     // 2 stop bits

};

static unsigned char select_parity[] = {

    LCR_PN,     // No parity

    LCR_PE,     // Even parity

    LCR_PO,     // Odd parity

    LCR_PM,     // Mark parity

    LCR_PS,     // Space parity

};

// The Cogent board has a 3.6864 MHz crystal

static unsigned short select_baud[] = {

    0,    // Unused

    4608, // 50

    0,    // 75

    2094, // 110

    0,    // 134.5

    1536, // 150

    0,    // 200

    768,  // 300

    384,  // 600

    182,  // 1200

    0,    // 1800

    96,   // 2400

    0,    // 3600

    48,   // 4800

    32,   // 7200

    24,   // 9600

    16,   // 14400

    12,   // 19200

    6,    // 38400

    4,    // 57600

    2,    // 115200

    0,    // 230400

};

#endif // CYGONCE_ARM_CMA230_SERIAL_H