Subversion Repositories openrisc

//==========================================================================

//

//      io/serial/mips/idt79s334a/mipsidt_serial.h

//

//      MIPS IDT79S334A Serial I/O definitions.

//

//==========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//==========================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):    tmichals based on driver by dmoseley, based on POWERPC driver by jskov

// Contributors: gthomas, jskov, dmoseley, tmichals

// Date:         2003-02-13

// Date:         2003-02-13

// Purpose:      MIPS IDT79s334a reference platform serial device driver definitions.

// Description:  IDT MIPS serial device driver definitions.

//####DESCRIPTIONEND####

//==========================================================================

// Description of serial ports on IDT board

// Interrupt Enable Register

#define IER_RCV 0x01

#define IER_XMT 0x02

#define IER_LS  0x04

#define IER_MS  0x08

// Line Control Register

#define LCR_WL5 0x00    // Word length

#define LCR_WL6 0x01

#define LCR_WL7 0x02

#define LCR_WL8 0x03

#define LCR_SB1 0x00    // Number of stop bits

#define LCR_SB1_5 0x04  // 1.5 -> only valid with 5 bit words

#define LCR_SB2 0x04

#define LCR_PN  0x00    // Parity mode - none

#define LCR_PE  0x0C    // Parity mode - even

#define LCR_PO  0x08    // Parity mode - odd

#define LCR_PM  0x28    // Forced "mark" parity

#define LCR_PS  0x38    // Forced "space" parity

#define LCR_DL  0x80    // Enable baud rate latch

// Line Status Register

#define LSR_RSR 0x01

#define LSR_THE 0x20

// Modem Control Register

#define MCR_DTR 0x01

#define MCR_RTS 0x02

#define MCR_INT 0x08   // Enable interrupts

// Interrupt status register

#define ISR_None             0x01

#define ISR_Rx_Line_Status   0x06

#define ISR_Rx_Avail         0x04

#define ISR_Rx_Char_Timeout  0x0C

#define ISR_Tx_Empty         0x02

#define IRS_Modem_Status     0x00

// FIFO control register

#define FCR_ENABLE     0x01

#define FCR_CLEAR_RCVR 0x02

#define FCR_CLEAR_XMIT 0x04

////////////////////////////////////////////////////////////

// Clean this up.

#define IDTMIPS_SER_16550_BASE_A    0xB8000803

#define IDTMIPS_SER_16550_BASE_B    0xB8000823

#define SER_16550_BASE              IDTMIPS_SER_16550_BASE_A

//-----------------------------------------------------------------------------

// Define the serial registers. The IDT board is equipped with a 16550C

// serial chip.

#define SER_16550_RBR 0x00   // receiver buffer register, read, dlab = 0

#define SER_16550_THR 0x00   // transmitter holding register, write, dlab = 0

#define SER_16550_DLL 0x00   // divisor latch (LS), read/write, dlab = 1

#define SER_16550_IER 0x04   // interrupt enable register, read/write, dlab = 0

#define SER_16550_DLM 0x04   // divisor latch (MS), read/write, dlab = 1

#define SER_16550_IIR 0x08   // interrupt identification reg, read, dlab = 0

#define SER_16550_FCR 0x08   // fifo control register, write, dlab = 0

#define SER_16550_AFR 0x08   // alternate function reg, read/write, dlab = 1

#define SER_16550_LCR 0x0c   // line control register, read/write

#define SER_16550_MCR 0x10   // modem control register, read/write

#define SER_16550_LSR 0x14   // line status register, read

#define SER_16550_MSR 0x18   // modem status register, read

#define SER_16550_SCR 0x1c   // scratch pad register

// The interrupt enable register bits.

#define SIO_IER_ERDAI   0x01            // enable received data available irq

#define SIO_IER_ETHREI  0x02            // enable THR empty interrupt

#define SIO_IER_ELSI    0x04            // enable receiver line status irq

#define SIO_IER_EMSI    0x08            // enable modem status interrupt

// The interrupt identification register bits.

#define SIO_IIR_IP      0x01            // 0 if interrupt pending

#define SIO_IIR_ID_MASK 0x0e            // mask for interrupt ID bits

// The line status register bits.

#define SIO_LSR_DR      0x01            // data ready

#define SIO_LSR_OE      0x02            // overrun error

#define SIO_LSR_PE      0x04            // parity error

#define SIO_LSR_FE      0x08            // framing error

#define SIO_LSR_BI      0x10            // break interrupt

#define SIO_LSR_THRE    0x20            // transmitter holding register empty

#define SIO_LSR_TEMT    0x40            // transmitter register empty

#define SIO_LSR_ERR     0x80            // any error condition

// The modem status register bits.

#define SIO_MSR_DCTS  0x01              // delta clear to send

#define SIO_MSR_DDSR  0x02              // delta data set ready

#define SIO_MSR_TERI  0x04              // trailing edge ring indicator

#define SIO_MSR_DDCD  0x08              // delta data carrier detect

#define SIO_MSR_CTS   0x10              // clear to send

#define SIO_MSR_DSR   0x20              // data set ready

#define SIO_MSR_RI    0x40              // ring indicator

#define SIO_MSR_DCD   0x80              // data carrier detect

// The line control register bits.

#define SIO_LCR_WLS0   0x01             // word length select bit 0

#define SIO_LCR_WLS1   0x02             // word length select bit 1

#define SIO_LCR_STB    0x04             // number of stop bits

#define SIO_LCR_PEN    0x08             // parity enable

#define SIO_LCR_EPS    0x10             // even parity select

#define SIO_LCR_SP     0x20             // stick parity

#define SIO_LCR_SB     0x40             // set break

#define SIO_LCR_DLAB   0x80             // divisor latch access bit

// The FIFO control register

#define SIO_FCR_FCR0   0x01             // enable xmit and rcvr fifos

#define SIO_FCR_FCR1   0x02             // clear RCVR FIFO

#define SIO_FCR_FCR2   0x04             // clear XMIT FIFO

/////////////////////////////////////////

static unsigned char select_word_length[] = {

    LCR_WL5,    // 5 bits / word (char)

    LCR_WL6,

    LCR_WL7,

    LCR_WL8

};

static unsigned char select_stop_bits[] = {

    0,

    LCR_SB1,    // 1 stop bit

    LCR_SB1_5,  // 1.5 stop bit

    LCR_SB2     // 2 stop bits

};

static unsigned char select_parity[] = {

    LCR_PN,     // No parity

    LCR_PE,     // Even parity

    LCR_PO,     // Odd parity

    LCR_PM,     // Mark parity

    LCR_PS,     // Space parity

};

static unsigned int select_baud[] = {

    0,        // Unused

    50,       // 50

    75,       // 75

    110,      // 110

    134,      // 134.5

    150,      // 150

    200,      // 200

    300,      // 300

    600,      // 600

    1200,     // 1200

    1800,     // 1800

    2400,     // 2400

    3600,     // 3600

    4800,     // 4800

    7200,     // 7200

    9600,     // 9600

    14400,    // 14400

    19200,    // 19200

    38400,    // 38400

    57600,    // 57600

    115200,   // 115200

    230400,   // 230400

};

// EOF mipsidt_serial.h