Subversion Repositories openrisc

# ====================================================================

#

#      ser_mn10300.cdl

#

#      eCos serial MN10300 configuration data

#

# ====================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

# ====================================================================

######DESCRIPTIONBEGIN####

#

# Author(s):      jskov

# Original data:  gthomas

# Contributors:

# Date:           1999-07-07

#

#####DESCRIPTIONEND####

#

# ====================================================================

cdl_package CYGPKG_IO_SERIAL_MN10300 {

    display       "MN10300 serial device drivers"

    parent        CYGPKG_IO_SERIAL_DEVICES

    active_if     CYGPKG_IO_SERIAL

    active_if     CYGPKG_HAL_MN10300

    # Note: this is not currently tied to a specific board since the

    # ports are "on chip"

    requires      CYGPKG_ERROR

    include_dir   cyg/io

    include_files ; # none _exported_ whatsoever

    description   "

           This option enables the serial device drivers for the

           MN10300."

    compile       -library=libextras.a   mn10300_serial.c

    define_proc {

        puts $::cdl_system_header "/***** serial driver proc output start *****/"

        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_DEVICE_HEADER "

        puts $::cdl_system_header "/*****  serial driver proc output end  *****/"

    }

# FIXME: Bad name

cdl_option CYGPKG_IO_SERIAL_MN10300_POLLED_MODE {

    display       "MN10300 polled mode serial drivers"

    flavor        bool

    default_value 0

    description   "

        If asserted, this option specifies that the serial device

        drivers for the MN10300 should be polled-mode instead of

        interrupt driven."

}

cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL0 {

    display       "MN10300 serial port 0 driver"

    flavor        bool

    default_value 1

    description   "

        This option includes the serial device driver for port 0 on the

        MN10300."

    cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL0_NAME {

        display       "Device name for MN10300 serial port 0"

        flavor        data

        default_value {"\"/dev/ser0\""}

        description   "

            This option specifies the device name port 0 on the MN10300."

    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL0_BAUD {

        display       "Baud rate for the MN10300 serial port 0 driver"

        flavor        data

        legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600

                      4800 7200 9600 14400 19200 38400 57600 115200 230400

        }

        default_value 38400

        description   "

            This option specifies the default baud rate (speed) for the

            MN10300 port 0."

    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL0_BUFSIZE {

        display       "Buffer size for the MN10300 serial port 0 driver"

        flavor        data

        legal_values  0 to 8192

        default_value 128

        description   "

            This option specifies the size of the internal buffers used

            for the MN10300 port 0."

    }

}

cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL1 {

    display       "MN10300 serial port 1 driver"

    flavor        bool

    default_value 1

    description   "

        This option includes the serial device driver for port 1 on

        the MN10300."

    cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL1_NAME {

        display       "Device name for MN10300 serial port 1"

        flavor        data

        default_value {"\"/dev/ser1\""}

        description   "

            This option specifies the device name port 1 on the MN10300."

    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL1_BAUD {

        display       "Baud rate for the MN10300 serial port 1 driver"

        flavor        data

        legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600

                      4800 7200 9600 14400 19200 38400 57600 115200 230400

        }

        default_value 38400

        description   "

            This option specifies the default baud rate (speed) for the

            MN10300 port 1."

    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL1_BUFSIZE {

        display       "Buffer size for the MN10300 serial port 1 driver"

        flavor        data

        legal_values  0 to 8192

        default_value 128

        description   "

            This option specifies the size of the internal buffers used

            for the MN10300 port 1."

    }

}

cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL2 {

    display       "MN10300 serial port 2 driver"

    flavor        bool

    default_value 1

    description   "

        This option includes the serial device driver for port 2 on the

        MN10300."

    cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL2_NAME {

        display       "Device name for MN10300 serial port 2"

        flavor        data

        default_value {"\"/dev/ser2\""}

        description   "

            This option specifies the device name port 2 on the MN10300."

    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL2_BAUD {

        display       "Baud rate for the MN10300 serial port 2 driver"

        flavor        data

        legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600

                      4800 7200 9600 14400 19200 38400 57600 115200 230400

        }

        default_value 38400

        description   "

            This option specifies the default baud rate (speed) for the

            MN10300 port 2."

    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL2_BUFSIZE {

        display       "Buffer size for the MN10300 serial port 2 driver"

        flavor        data

        legal_values  0 to 8192

        default_value 128

        description   "

            This option specifies the size of the internal buffers used

            for the MN10300 port 2."

    }

}

    cdl_component CYGPKG_IO_SERIAL_MN10300_OPTIONS {

        display "Serial device driver build options"

        flavor  none

        description   "

            Package specific build options including control over

            compiler flags used only in building this package,

            and details of which tests are built."

        cdl_option CYGPKG_IO_SERIAL_MN10300_CFLAGS_ADD {

            display "Additional compiler flags"

            flavor  data

            no_define

            default_value { "" }

            description   "

                This option modifies the set of compiler flags for

                building these serial device drivers. These flags are used in addition

                to the set of global flags."

        }

        cdl_option CYGPKG_IO_SERIAL_MN10300_CFLAGS_REMOVE {

            display "Suppressed compiler flags"

            flavor  data

            no_define

            default_value { "" }

            description   "

                This option modifies the set of compiler flags for

                building these serial device drivers. These flags are removed from

                the set of global flags if present."

        }

    }

}

# EOF ser_mn10300.cdl