Subversion Repositories openrisc

# ====================================================================

#

#      hal_arm_at91.cdl

#

#      Atmel evaluation board (EB40) HAL package configuration data

#

# ====================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

# ====================================================================

######DESCRIPTIONBEGIN####

#

# Author(s):      gthomas

# Contributors:   gthomas

# Date:           2001-07-12

#

#####DESCRIPTIONEND####

#

# ====================================================================

cdl_package CYGPKG_HAL_ARM_AT91 {

    display       "Atmel evaluation board (EB40)"

    parent        CYGPKG_HAL_ARM

    define_header hal_arm_at91.h

    include_dir   cyg/hal

    hardware

    description   "

        The AT91 HAL package provides the support needed to run

        eCos on an Atmel AT91/EB40 eval board."

    compile       hal_diag.c at91_misc.c

    implements    CYGINT_HAL_DEBUG_GDB_STUBS

    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK

    implements    CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT

    implements    CYGINT_HAL_ARM_ARCH_ARM7

    implements    CYGINT_HAL_ARM_THUMB_ARCH

    define_proc {

        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   "

        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H "

        puts $::cdl_header "#define HAL_PLATFORM_CPU    \"ARM7TDMI\""

        puts $::cdl_header "#define HAL_PLATFORM_BOARD  \"Atmel AT91/EB40\""

        puts $::cdl_header "#define HAL_PLATFORM_EXTRA  \"\""

    }

    cdl_component CYG_HAL_STARTUP {

        display       "Startup type"

        flavor        data

        default_value {"RAM"}

        legal_values  {"RAM" "ROM" "ROMRAM"}

        no_define

        define -file system.h CYG_HAL_STARTUP

        description   "

            When targetting the AT91 eval board it is possible to build

            the system for either RAM bootstrap or ROM bootstrap(s). Select

            'ram' when building programs to load into RAM using onboard

            debug software such as Angel or eCos GDB stubs.  Select 'rom'

            when building a stand-alone application which will be put

            into ROM.  Using ROMRAM will allow the program to exist in

            ROM, but be copied to RAM during startup."

    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {

        display      "Number of communication channels on the board"

        flavor       data

        calculated   2

    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {

        display          "Debug serial port"

        active_if        CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE

        flavor data

        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1

        default_value    0

        description      "

            The AT91 board has two serial ports. This option

            chooses which port will be used to connect to a host

            running GDB."

     }

     cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {

         display          "Diagnostic serial port"

         active_if        CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE

         flavor data

         legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1

         default_value    0

         description      "

            The AT91 board has two serial ports. This option

            chooses which port will be used for diagnostic output."

     }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CHANNELS_DEFAULT_BAUD {

        display       "Console/GDB serial port baud rate"

        flavor        data

        legal_values  9600 19200 38400 57600 115200

        default_value 38400

        description   "

            This option controls the default baud rate used for the

            Console/GDB connection."

    }

    # Real-time clock/counter specifics

    cdl_option CYGNUM_HAL_ARM_AT91_CLOCK_SPEED {

        display       "CPU clock speed"

        flavor        data

        calculated    32768000

    }

    cdl_component CYGNUM_HAL_RTC_CONSTANTS {

        display       "Real-time clock constants"

        flavor        none

        cdl_option CYGNUM_HAL_RTC_NUMERATOR {

            display       "Real-time clock numerator"

            flavor        data

            calculated    1000000000

        }

        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {

            display       "Real-time clock denominator"

            flavor        data

            calculated    100

        }

        cdl_option CYGNUM_HAL_RTC_PERIOD {

            display       "Real-time clock period"

            flavor        data

            calculated    ((CYGNUM_HAL_ARM_AT91_CLOCK_SPEED/32) / CYGNUM_HAL_RTC_DENOMINATOR)

        }

    }

    cdl_component CYGBLD_GLOBAL_OPTIONS {

        display "Global build options"

        flavor  none

        parent  CYGPKG_NONE

        description   "

            Global build options including control over

            compiler flags, linker flags and choice of toolchain."

        cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {

            display "Global command prefix"

            flavor  data

            no_define

            default_value { "arm-elf" }

            description "

                This option specifies the command prefix used when

                invoking the build tools."

        }

        cdl_option CYGBLD_GLOBAL_CFLAGS {

            display "Global compiler flags"

            flavor  data

            no_define

            default_value { "-mcpu=arm7tdmi -mno-short-load-words -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" }

            description   "

                This option controls the global compiler flags which are used to

                compile all packages by default. Individual packages may define

                options which override these global flags."

        }

        cdl_option CYGBLD_GLOBAL_LDFLAGS {

            display "Global linker flags"

            flavor  data

            no_define

            default_value { "-mcpu=arm7tdmi -mno-short-load-words -Wl,--gc-sections -Wl,-static -g -nostdlib" }

            description   "

                This option controls the global linker flags. Individual

                packages may define options which override these global flags."

        }

    }

    cdl_component CYGHWR_MEMORY_LAYOUT {

        display "Memory layout"

        flavor data

        no_define

        calculated { (CYG_HAL_STARTUP == "RAM") ?    "arm_at91_eb40_ram" :

                     (CYG_HAL_STARTUP == "ROMRAM") ? "arm_at91_eb40_romram" :

                                                     "arm_at91_eb40_rom" }

        cdl_option CYGHWR_MEMORY_LAYOUT_LDI {

            display "Memory layout linker script fragment"

            flavor data

            no_define

            define -file system.h CYGHWR_MEMORY_LAYOUT_LDI

            calculated { (CYG_HAL_STARTUP == "RAM") ? "" :

                         (CYG_HAL_STARTUP == "ROMRAM") ? "" :

                                                      "" }

        }

        cdl_option CYGHWR_MEMORY_LAYOUT_H {

            display "Memory layout header file"

            flavor data

            no_define

            define -file system.h CYGHWR_MEMORY_LAYOUT_H

            calculated { (CYG_HAL_STARTUP == "RAM") ? "" :

                         (CYG_HAL_STARTUP == "ROMRAM") ? "" :

                                                      "" }

        }

    }

    cdl_option CYGSEM_HAL_ROM_MONITOR {

        display       "Behave as a ROM monitor"

        flavor        bool

        default_value 0

        parent        CYGPKG_HAL_ROM_MONITOR

        requires      { CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" }

        description   "

            Enable this option if this program is to be used as a ROM monitor,

            i.e. applications will be loaded into RAM on the board, and this

            ROM monitor may process exceptions or interrupts generated from the

            application. This enables features such as utilizing a separate

            interrupt stack when exceptions are generated."

    }

    cdl_option CYGSEM_HAL_USE_ROM_MONITOR {

         display       "Work with a ROM monitor"

         flavor        booldata

         legal_values  { "Generic" "GDB_stubs" }

         default_value { CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 }

         parent        CYGPKG_HAL_ROM_MONITOR

         requires      { CYG_HAL_STARTUP == "RAM" }

         description   "

             Support can be enabled for different varieties of ROM monitor.

             This support changes various eCos semantics such as the encoding

             of diagnostic output, or the overriding of hardware interrupt

             vectors.

             Firstly there is \"Generic\" support which prevents the HAL

             from overriding the hardware vectors that it does not use, to

             instead allow an installed ROM monitor to handle them. This is

             the most basic support which is likely to be common to most

             implementations of ROM monitor.

             \"GDB_stubs\" provides support when GDB stubs are included in

             the ROM monitor or boot ROM."

     }

    cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {

        display       "Redboot HAL options"

        flavor        none

        no_define

        parent        CYGPKG_REDBOOT

        active_if     CYGPKG_REDBOOT

        description   "

            This option lists the target's requirements for a valid Redboot

            configuration."

        cdl_option CYGBLD_BUILD_REDBOOT_BIN {

            display       "Build Redboot ROM binary image"

            active_if     CYGBLD_BUILD_REDBOOT

            default_value 1

            no_define

            description "This option enables the conversion of the Redboot ELF

                         image to a binary image suitable for ROM programming."

            make -priority 325 {

                /bin/redboot.bin : /bin/redboot.elf

                $(OBJCOPY) --strip-debug $< $(@:.bin=.img)

                $(OBJCOPY) -O srec $< $(@:.bin=.srec)

                $(OBJCOPY) -O binary $< $@

            }

        }

    }

}