Subversion Repositories openrisc

//==========================================================================

//

//      ebsa285_misc.c

//

//      HAL misc board support code for StrongARM EBSA285-1

//

//==========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//==========================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):    gthomas

// Contributors: gthomas

// Date:         1999-02-20

// Purpose:      HAL board support

// Description:  Implementations of HAL board interfaces

//

//####DESCRIPTIONEND####

//

//========================================================================*/

#include <pkgconf/hal.h>

#include <pkgconf/system.h>

#include CYGBLD_HAL_PLATFORM_H

#include CYGHWR_MEMORY_LAYOUT_H

#include <cyg/infra/cyg_type.h>         // base types

#include <cyg/infra/cyg_trac.h>         // tracing macros

#include <cyg/infra/cyg_ass.h>          // assertion macros

#include <cyg/hal/hal_io.h>             // IO macros

#include <cyg/hal/hal_if.h>             // calling interface API

#include <cyg/hal/hal_arch.h>           // Register state info

#include <cyg/hal/hal_diag.h>

#include <cyg/hal/hal_intr.h>           // Interrupt names

#include <cyg/hal/hal_cache.h>

#include <cyg/hal/hal_ebsa285.h>        // Hardware definitions

#include <cyg/infra/diag.h>             // diag_printf

#include <string.h> // memset

/*

 * Toggle LED for debugging purposes.

 */

/*

 * EBSA-285 Soft I/O Register

 */

#define EBSA_285_SOFT_IO_REGISTER           ((cyg_uint32 *)0x40012000)

/*

 * EBSA-285 Soft I/O Register Bit Field definitions

 */

#define EBSA_285_SOFT_IO_TOGGLE             0x80

#define EBSA_285_SOFT_IO_RED_LED            0x04

#define EBSA_285_SOFT_IO_GREEN_LED          0x02

#define EBSA_285_SOFT_IO_AMBER_LED          0x01

#define EBSA_285_SOFT_IO_J9_9_10_MASK       0x40

#define EBSA_285_SOFT_IO_J9_11_12_MASK      0x20

#define EBSA_285_SOFT_IO_J9_13_14_MASK      0x10

#define EBSA_285_SOFT_IO_SWITCH_L_MASK      0x0F

static void

hal_bsp_mmu_init(int sdram_size);

// Some initialization has already been done before we get here.

//

// Set up the interrupt environment.

// Set up the MMU so that we can use caches.

// Enable caches.

// - All done!

void hal_hardware_init(void)

{

    // Disable all interrupt sources:

    *SA110_IRQCONT_IRQENABLECLEAR = 0xffffffff;

    *SA110_IRQCONT_FIQENABLECLEAR = 0xffffffff; // including FIQ

    // Disable the timers

    *SA110_TIMER1_CONTROL = 0;

    *SA110_TIMER2_CONTROL = 0;

    *SA110_TIMER3_CONTROL = 0;

    *SA110_TIMER4_CONTROL = 0;

    *SA110_TIMER1_CLEAR = 0;            // Clear any pending interrupt

    *SA110_TIMER2_CLEAR = 0;            // (Data: don't care)

    *SA110_TIMER3_CLEAR = 0;

    *SA110_TIMER4_CLEAR = 0;

    // Let the timer run at a default rate (for delays)

    hal_clock_initialize(CYGNUM_HAL_RTC_PERIOD);

    // Set up MMU so that we can use caches

    hal_bsp_mmu_init( hal_dram_size );

    // Enable caches

    HAL_DCACHE_ENABLE();

    HAL_ICACHE_ENABLE();

    // Set up eCos/ROM interfaces

    hal_if_init();

}

// -------------------------------------------------------------------------

// MMU initialization:

static void

hal_bsp_mmu_init(int sdram_size)

{

    unsigned long ttb_base = ((unsigned long)0x4000); // could be external

    unsigned long i;

    *EBSA_285_SOFT_IO_REGISTER = ~EBSA_285_SOFT_IO_RED_LED; // Red LED on

// For if we assign the ttb base dynamically:

//    if ((ttb_base & ARM_TRANSLATION_TABLE_MASK) != ttb_base) {

//        // we cannot do this:

//        while ( 1 ) {

//            *EBSA_285_SOFT_IO_REGISTER = 0; // All LEDs on

//            for ( i = 100000; i > 0 ; i++ ) ;

//            *EBSA_285_SOFT_IO_REGISTER = 7; // All LEDs off

//            for ( i = 100000; i > 0 ; i++ ) ;

//#ifdef CYG_HAL_STARTUP_RAM

//            return; // Do not bother looping forever...

//#endif

//        }

//    }

    /*

     * Set the TTB register

     */

    asm volatile ("mcr  p15,0,%0,c2,c0,0"

                  :

                  : "r"(ttb_base)

                /*:*/

        );

    /*

     * Set the Domain Access Control Register

     */

    i = ARM_ACCESS_TYPE_MANAGER(0)    |

        ARM_ACCESS_TYPE_NO_ACCESS(1)  |

        ARM_ACCESS_TYPE_NO_ACCESS(2)  |

        ARM_ACCESS_TYPE_NO_ACCESS(3)  |

        ARM_ACCESS_TYPE_NO_ACCESS(4)  |

        ARM_ACCESS_TYPE_NO_ACCESS(5)  |

        ARM_ACCESS_TYPE_NO_ACCESS(6)  |

        ARM_ACCESS_TYPE_NO_ACCESS(7)  |

        ARM_ACCESS_TYPE_NO_ACCESS(8)  |

        ARM_ACCESS_TYPE_NO_ACCESS(9)  |

        ARM_ACCESS_TYPE_NO_ACCESS(10) |

        ARM_ACCESS_TYPE_NO_ACCESS(11) |

        ARM_ACCESS_TYPE_NO_ACCESS(12) |

        ARM_ACCESS_TYPE_NO_ACCESS(13) |

        ARM_ACCESS_TYPE_NO_ACCESS(14) |

        ARM_ACCESS_TYPE_NO_ACCESS(15);

    asm volatile ("mcr  p15,0,%0,c3,c0,0"

                  :

                  : "r"(i)

                /*:*/

        );

    /*

     * First clear all TT entries - ie Set them to Faulting

     */

    memset((void *)ttb_base, 0, ARM_FIRST_LEVEL_PAGE_TABLE_SIZE);

    /*

     * We only do direct mapping for the EBSA board. That is, all

     * virt_addr == phys_addr.

     */

    /*

     * Actual Base = 0x000(00000)

     * Virtual Base = 0x000(00000)

     * Size = Max SDRAM

     * SDRAM

     */

    for (i = 0x000; i < (sdram_size >> 20); i++) {

        ARM_MMU_SECTION(ttb_base, i, i,

                        ARM_CACHEABLE, ARM_BUFFERABLE,

                        ARM_ACCESS_PERM_RW_RW);

    }

#ifdef CYGPKG_IO_PCI

    /*

     * Actual Base = CYGHWR_HAL_ARM_EBSA285_PCI_MEM_MAP_BASE

     * Virtual Base = CYGHWR_HAL_ARM_EBSA285_PCI_MEM_MAP_BASE

     * Size = CYGHWR_HAL_ARM_EBSA285_PCI_MEM_MAP_SIZE

     * Memory accessible from PCI space. Overrides part of the above mapping.

     */

    for (i = CYGHWR_HAL_ARM_EBSA285_PCI_MEM_MAP_BASE >> 20;

         i < ((CYGHWR_HAL_ARM_EBSA285_PCI_MEM_MAP_BASE+CYGHWR_HAL_ARM_EBSA285_PCI_MEM_MAP_SIZE) >> 20);

         i++) {

        ARM_MMU_SECTION(ttb_base, i, i,

                        ARM_UNCACHEABLE, ARM_UNBUFFERABLE,

                        ARM_ACCESS_PERM_RW_RW);

    }

#endif

    /*

     * Actual Base = 0x400(00000)

     * Virtual Base = 0x400(00000)

     * Size = 1M

     * 21285 Registers

     *

     * Actual Base = 0x400(10000)

     * Virtual Base = 0x400(10000)

     * Size = 1M

     * Soft I/O port and XBus IO

     */

    ARM_MMU_SECTION(ttb_base, 0x400, 0x400,

                    ARM_UNCACHEABLE, ARM_UNBUFFERABLE,

                    ARM_ACCESS_PERM_RW_RW);

    /*

     * Actual Base = 0x410(00000) - 0x413(FFFFF)

     * Virtual Base = 0x410(00000) - 0x413(FFFFF)

     * Size = 4M

     * FLASH ROM

     */

    for (i = 0x410; i <= 0x413; i++) {

        ARM_MMU_SECTION(ttb_base, i, i,

                        ARM_CACHEABLE, ARM_UNBUFFERABLE,

                        ARM_ACCESS_PERM_RW_RW);

    }

    /*

     * Actual Base = 0x420(00000)

     * Virtual Base = 0x420(00000)

     * Size = 1M

     * 21285 CSR Space

     */

    ARM_MMU_SECTION(ttb_base, 0x420, 0x420,

                    ARM_UNCACHEABLE, ARM_UNBUFFERABLE,

                    ARM_ACCESS_PERM_RW_RW);

    /*

     * Actual Base = 0x500(00000)-0x50F(FFFFF)

     * Virtual Base = 0x500(00000)-0x50F(FFFFF)

     * Size = 16M

     * Zeros (Cache Clean) Bank

     */

    for (i = 0x500; i <= 0x50F; i++) {

        ARM_MMU_SECTION(ttb_base, i, i,

                        ARM_CACHEABLE, ARM_BUFFERABLE,

                        ARM_ACCESS_PERM_RW_RW);

    }

    /*

     * Actual Base = 0x780(00000)-0x78F(FFFFF)

     * Virtual Base = 0x780(00000)-0x78F(FFFFF)

     * Size = 16M

     * Outbound Write Flush

     */

    for (i = 0x780; i <= 0x78F; i++) {

        ARM_MMU_SECTION(ttb_base, i, i,

                        ARM_UNCACHEABLE, ARM_UNBUFFERABLE,

                        ARM_ACCESS_PERM_RW_RW);

    }

    /*

     * Actual Base = 0x790(00000)-0x7C0(FFFFF)

     * Virtual Base = 0x790(00000)-0x7C0(FFFFF)

     * Size = 65M

     * PCI IACK/Config/IO Space

     */

    for (i = 0x790; i <= 0x7C0; i++) {

        ARM_MMU_SECTION(ttb_base, i, i,

                        ARM_UNCACHEABLE, ARM_UNBUFFERABLE,

                        ARM_ACCESS_PERM_RW_RW);

    }

    /*

     * Actual Base = 0x800(00000) - 0xFFF(FFFFF)

     * Virtual Base = 0x800(00000) - 0xFFF(FFFFF)

     * Size = 2G

     * PCI Memory Space

     */

    for (i = 0x800; i <= 0xFFF; i++) {

        ARM_MMU_SECTION(ttb_base, i, i,

                        ARM_UNCACHEABLE, ARM_BUFFERABLE,

                        ARM_ACCESS_PERM_RW_RW);

    }

    *EBSA_285_SOFT_IO_REGISTER = ~EBSA_285_SOFT_IO_AMBER_LED; // AmberLED on

}

/*------------------------------------------------------------------------*/

//

// Memory layout

//

externC cyg_uint8 *

hal_arm_mem_real_region_top( cyg_uint8 *regionend )

{

    CYG_ASSERT( hal_dram_size > 0, "Didn't detect DRAM size!" );

    CYG_ASSERT( hal_dram_size <=  256<<20,

                "More than 256MB reported - that can't be right" );

    // is it the "normal" end of the DRAM region? If so, it should be

    // replaced by the real size

    if ( regionend ==

         ((cyg_uint8 *)CYGMEM_REGION_ram + CYGMEM_REGION_ram_SIZE) ) {

        regionend = (cyg_uint8 *)CYGMEM_REGION_ram + hal_dram_size;

    }

    return regionend;

} // hal_arm_mem_real_region_top()

// -------------------------------------------------------------------------

static cyg_uint32 _period;

void hal_clock_initialize(cyg_uint32 period)

{

    _period = period;

    *SA110_TIMER3_CONTROL = 0;          // Disable while we are setting up

    *SA110_TIMER3_LOAD = period;        // Reload value

    *SA110_TIMER3_CLEAR = 0;            // Clear any pending interrupt

                                        // (Data: don't care)

    *SA110_TIMER3_CONTROL = 0x000000cc; // Enable, Periodic (auto-reload),

                   // External clock (3.68MHz on irq_in_l[2] for Timer 3)

    *SA110_TIMER3_CLEAR = 0;            // Clear any pending interrupt again

    // That's all.

}

// This routine is called during a clock interrupt.

void hal_clock_reset(cyg_uint32 vector, cyg_uint32 period)

{

    *SA110_TIMER3_CLEAR = period; // Clear any pending interrupt (Data: don't care)

}

// Read the current value of the clock, returning the number of hardware

// "ticks" that have occurred (i.e. how far away the current value is from

// the start)

void hal_clock_read(cyg_uint32 *pvalue)

{

    *pvalue = (cyg_uint32)(_period) - *SA110_TIMER3_VALUE;

}

//

// Delay for some number of micro-seconds

//

void hal_delay_us(cyg_int32 usecs)

{

    int diff, diff2;

    cyg_uint32 val1, val2;

    while (usecs-- > 0) {

        diff = 0;

        val1 = *SA110_TIMER3_VALUE;

        while (diff < 3) {

            while ((val2 = *SA110_TIMER3_VALUE) == val1) ;

            if (*SA110_TIMER3_LOAD) {

                // A kernel is running, the counter may get reset as we watch

                diff2 = val2 - val1;

                if (diff2 < 0) diff2 += *SA110_TIMER3_LOAD;

                diff += diff2;

            } else {

                diff += val2 - val1;

            }

        }

    }

}

// -------------------------------------------------------------------------

// This routine is called to respond to a hardware interrupt (IRQ).  It

// should interrogate the hardware and return the IRQ vector number.

int hal_IRQ_handler(void)

{

    int sources;

    int index;

#if 0 // test FIQ and print alert if active - really for debugging

    sources = *SA110_IRQCONT_FIQSTATUS;

    if ( 0 != sources )

        diag_printf( "FIQ source active!!! - fiqstatus %08x irqstatus %08x\n",

                     sources, *SA110_IRQCONT_IRQSTATUS );

    else

#endif // Scan FIQ sources also

    sources = *SA110_IRQCONT_IRQSTATUS;

// if we come to support FIQ properly...

//    if ( 0 == sources )

//        sources = *SA110_IRQCONT_FIQSTATUS;

    // Nothing wrong with scanning them in the order provided...

    // and it'll make the serial device steal fewer cycles.

    // So, knowing this is an ARM:

    if ( sources & 0xff )

        index = 0;

    else if ( sources & 0xff00 )

        index = 8;

    else if ( sources & 0xff0000 )

        index = 16;

    else // if ( sources & 0xff000000 )

        index = 24;

    do {

        if ( (1 << index) & sources )

            return index;

        index++;

    } while ( index & 7 );

    return CYGNUM_HAL_INTERRUPT_NONE; // This shouldn't happen!

}

//

// Interrupt control

//

void hal_interrupt_mask(int vector)

{

    *SA110_IRQCONT_IRQENABLECLEAR = 1 << vector;

}

void hal_interrupt_unmask(int vector)

{

    *SA110_IRQCONT_IRQENABLESET = 1 << vector;

}

void hal_interrupt_acknowledge(int vector)

{

    // Nothing to do here.

}

void hal_interrupt_configure(int vector, int level, int up)

{

    // No interrupts are configurable on this hardware

}

void hal_interrupt_set_level(int vector, int level)

{

    // No interrupts are configurable on this hardware

}

#include CYGHWR_MEMORY_LAYOUT_H

typedef void code_fun(void);

void ebsa285_program_new_stack(void *func)

{

    register CYG_ADDRESS stack_ptr asm("sp");

    register CYG_ADDRESS old_stack asm("r4");

    register code_fun *new_func asm("r0");

    old_stack = stack_ptr;

    stack_ptr = CYGMEM_REGION_ram + CYGMEM_REGION_ram_SIZE - sizeof(CYG_ADDRESS);

    new_func = (code_fun*)func;

    new_func();

    stack_ptr = old_stack;

    return;

}

/*------------------------------------------------------------------------*/

// EOF ebsa285_misc.c